GPO and RA plug-ins not working in Logic Pro 8.0.2

I have installed RA and GPO on my Mac Book Pro. When I open Logic Pro they are not appearing in the Plug-in list. Kontakt 2 is but won't let me load individual instruments for GPO. The strange thing is I also have a copy of Logic Express and both RA and GPO work fine here (even though they don't pass the AU validation). They also work as stand alones fine. In Logic Pro, RA and GPO do not appear in the AU validation list. Can anyone help? I have all the latest updates as far as I am aware. It's very annoying!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

Similar Messages

Safari - Flash and Silverlight Plug-ins NOT working

Safari does not seem to recognize my Flash and Silverlight Plug-ins so that I can watch and stream videos. I might have messed it up, but I can not fix it. Any help is appreciated. Thanks!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

Garage Band and other Plug-Ins not Working

My Garage band isn't working. When I click on it the icon just bounces continually and never does anything. It was working fine yesterday. I also have a couple plug-ins, KORG M1 and Wavestation, that I use with Garage band and they are doing the exact same thing. Why am I having these issues??

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

3rd party plug-ins not working in logic

I can't get my zero G & Hardcore bass plug-ins to show up in an instrument channal.

Hi,
you need to make sure your plugins are:
UNIVERSAL BINARY
Cheers
Egyptian Merchet and Groma Mac OS X (10.4.9) Black Coffee and a Black Staffordshire Terrier

Plug-Ins Not Showing In Logic Pro 9

Hey guys, I'm having some trouble with plug-ins in Logic Pro 9. Any of the third-party plug-ins I have installed (I've checked the location in the Components folder and they're all there, so I guess it's not something related to the plug-ins location) don't show up, even after rescaning the AU library, reopening Logic and all that stuff.
Anybody has a clue about what could cause this and how to solve it, please?
Cheers!

If you ran Logic Pro in 32bit mode first and then in 64bit mode.. any 32bit plugins which you have installed, will appear under either the Software Instrument button (In LP9) or the Insert FX button for a Software Instrument track....
If they dont then either..
You didn't install the AU version of the plugin.... in which case, please do so and then again run LP in 32bit mode and then 64bit mode to make the 32bit version appear in LP 64bit mode..
or....
You are not looking in the right place as shown below..
or...
You are trying to access a software Instrument on an Audio Track which wont work.. Create a Software instrument track and try again...
or..
You are not using a legal version of the 32bit plugin...... in which case, asking here is a bit of a dumb move...
Here is a screenshot of where the Software Instrument button is in LP9... Click and hold.. on it and look for the 32bit AU plugin sub menu and choose Sylenth...

Nik Software Plug-ins not working with LR3

Hello,
I have both LR 2.7 and LR3 running on my computer. When I installed LR 3, it load the Nik software plug-ins into the external editor section like LR 2.7. However, when I try to use a Nik plug-in in LR 3 I get an error message that the " File xxxxx.tif can not be opened because it does not exist or access is denied." The Nik interface opens, then I get this error message, but then it places the xxxxx.tif file in the film strip. The plug-ins work just fine with LR 2.7. I've uninstalled and re-installed the plug-ins, but the same error message pops up in LR 3. I have contacted Nik Software, but have not gotten an answer that works. Has anyone else had this problem? If so, what was your solution. I've tried everything I know of except uninstalling LR 3 and re-installing. I'm using Windows 7 64bit. I have CS4 (32 and 64bit) and CS5 (32 and 63bit) running and the plug-ins work just fine with them.
Thanks for your help in advance!
Dennis

Hi Martin,
You might try going in the pref and under external editing and try to manually set up each one. Go down to additonal external editing. Click on Choose and then go to the folder where you have your Nik software installed and choose the program file. There will be dialog box telling you to name the file, call it anything you want and the click ok. Go to the drop down bar and select Save as new preset. Close LR3 and then reopen and check to see if your program is there under the new name. If not, you probably will have un-install all the plug-ins and re-install. Hope this helps!
Dennis

Korg Wavestation Plug ins not appearing in Logic 9.1.3

Hi all;
New to the Forums and Logic. I just upgraded to Logic Express from Garageband and Im still pretty new. I am finding my way around ok but I am having an issue with my Korg Wavestation Plug ins showing up in Logic.
They show up fine in Garageband, and if I open a Garageband Project that used Wavestation instrumentation they are there too.
However, If I start a new projct The choice for Wavestation does not appear, only the Apple Plug ins. I went into the AU manager and KORG wavestation is listed nd I tried uninstall and reinstall. Am I supposed to use MIDI in stead of sofware instrument ?
BTW its Korg Legacy Collection v1.6.6 Logic is v 9.1.3 and Its on a MacBook Pro 2.4 GHZ Duo Core with 8GB RAM
Any help appreciated... I searched but couldnt find any relevant threads
M

Set Logic to open in 32-bit mode, then open a default empty project (not one you're working on) Logic should validate the plugins... after it's finished, close Logic, re-set to 64-bit mode and you should be ok.

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

TS4628 onscreen keyboard does not work in logic pro x

onscreen keyboard has stopped working in logic pro x - latest version.
There is no indication of midi in or out on control bar when keys pressed.
also, certain keys do register do not trigger from outboard keyboard instrument.
when playing back tracks, the relevant keys auto depress on the onscreen keypad.
audio output is fine on the system. all keys on piano roll keyboard work fine.
The onscreen keyboard works fine in garageband
have reset all midi assignments in prefs.
have reinstalled the program but the issue remains
silvejon

You have either installed a midi controller that is over riding things or you are running an iOS App that is interfering....
Turn off all iOS devices to test for iOS App
Delete CS prefs to test for conflicting Midi Controller issues...
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.

Plug-ins not recognised in logic and ableton live

Ive put all my plug in files in Library/Audio/plugins/components but still logic and ableton live doesnt recognise these plug in files. I realy need those plug-ins, what is going on????????

I understand why it's a painful process.
If a developer is making Mac-only software, and already using XCode, then making a unibin version is not too painful (ranging from trivial to a little bit of work).
However, if you're a large cross-platform company using a different compiler, you may have to completely change a development infrastructure you've built up over years, redevelop all your custom tools, and find solutions to the cross-platform issue, before even writing any code - and that can be a very big deal indeed.
The real point is that the customer should be aware of these things before making any critical decisions...
Ok, I'll go back to hankering after a MacBook Pro and a Mac Pro now. Anyone else like to go "window-shopping" in the Apple Online Store, and seeing how much your dream config costs...? A £7K Mac Pro, now we're talking...

AU Manager Crashes, Standard 3rd party plug-ins not working

I recently had a huge crash, down to the point where I eventually replaced my system drive with a brand new one, and started fresh.
After rebuilding my entire world, plug-ins that used to work, don't anymore - and they're standards that everyone uses (Kontakt 2.1, etc). I can't even get the AU Manager to load.....Logic just sits there forever with "the beach ball of death" untill I force quit.
Nothing "new" has been introduced. I've simply replicated the system I had before down to the T.
Any thougts?
I'm on 7.1.1 in 10.4.4
G5 2x2, LAP 7.1.1, 10.4.2, 4.5 gigs

Try removing all 3rd party plugins and see if Logic works by itself.
Add the plugins back to the components folder one by one, testing to see if they behave.
Sorry to hear about your crash, I have had this happen to me and it was a week of pain.
It really made me wish all plug ins were authorized on dongles, so that something like carbon copy cloner would have saved the day.

File format plug-ins not working

I cannot get any of my file format plug-ins working with 5.1. They were working fine with 5.0. I am using some of the plug-ins here but none are working since I upgraded.
http://www.telegraphics.com.au/sw/
Is there anyway to check whether Photoshop has even recgonized these plug-ins? There doesn't seem to be anyway to scroll in the about screen in photoshop to check there.

Thanks! Ok, I'm getting "NO VERSION - 32-bit plug-in not supported in 64-bit" for those plug-ins.
Is there any workaround?

Topaz Plug-ins not working in LR 4

Spent over two hours on the technical support chat line this morning trying to resolve this issue. In the end, the support specialist had to punt and escalated the case to a higher level. Not sure what that means, I haven't been notified by anyone at Adobe. I also notified Topaz Labs and they said some people are having the problem and some are not but they're looking for solutions. Adobe's opinion was that it was Topaz's issue to deal with but after reading the plethora of posts I'm not so sure. I'm running Mac OS 10.7.3 and that seems to be a common thread through a lot of what I read. I don't get the impression that Adobe is listening to their customer on this one. Otherwise their support specialists would have been all over this. Sigh....guess I'm waiting for a patch from someone...maybe.

I had the same problem with LR4 and plugins from Topaz. I have PS3 and am not interested in downloading PS5. Here is what I sent to Topaz and their response:
I followed instructions for removing old versions of Fusion Express and reinstalled. I purchased two plugins as well today,Topaz Adjust and Star Effects. When I attempt to edit photo in Lightroom 4 by selecting a photo, then choosing Photo, edit in, Fusion Express2 64bit, I receive the message Unexpected error performing command: bad argument #1 to \'lower\'(string expected, got nil). I have 6GB of RAM on a Dell N5010 laptop with an Intel i5 2.53Ghz processor, using Windows 7 64bit.
Response from Topaz help:
Hello,
It seems that the issue with Plug-ins and there compatibility is on Adobe's end, and supposedly they are going to be releasing a new version on LR4 that is compatible (a 4.1 version) asap.
Please see here for more info: http://feedback.photoshop.com/photosh...
Let me know if you have any other questions.

Plug ins not working after upgrade

After upgrading to Mtn Lion, addicitive drums plug ins are not recognized in Logic. They are working fine in garage band.

Sorry I'm unsure! Have you had any progress with it?

Chrome and Firefox plug-ins not installed with latest version of Reader

I'm running OS X 10.7.2 and just installed the latest version of Acrobat Reader and would like to use the plug-ins it is supposed to come with to view PDFs in Chrome and Firefox. However, the version of Reader that I downloaded (10.1.1) doesn't seem to include the plug-ins. A few additional pieces of information:
1) Acrobat Reader > Contents > Plug-ins contains NO files.
2) In Reader, the Preferences > Internet > "Display PDF in browser" box is checked.
3) In Chrome, Acrobat Reader is not listed on chrome://plugins
4) In Firefox, Acrobat Reader is not include in the list of Plug-Ins
I already rebooted my computer, and also deleted and re-installed Adobe Reader. Now at a loss for what to do next. Any assistance would be greatly appreciated!!
Best,
Chelsea

Acrobat Help | Display PDF in browser | Acrobat, Reader XI

GPO and RA plug-ins not working in Logic Pro 8.0.2

Similar Messages

Maybe you are looking for