GPO on Client side VPN

Hi,<o:p></o:p>
I am facing problem while updating Group policy to client side VPN user system, I have opened default ports related to GPO, Still GPO is not getting updated. Microsoft article advised that dynamic
ports range 49152 - 65535 need to open. Due to security concern we unable to open these huge range of ports. Finally GP update command is working by opening these two ports 49159 and 49157. but GP update /force command is still not working. <o:p></o:p>
Kindly advice which ports need to be opened for GP update /force.<o:p></o:p>
Secondly I need to get VPN connected before user logged in. otherwise i hope GP update command will not serve the purpose. Software need to be assigned to the user by using GP update from the
update server/domain controller.<o:p></o:p>
Please advise if there is any solution for this case.<o:p></o:p>
Regards,<o:p></o:p>
Raj. <o:p></o:p>

Hi JeraldRaj,
If all your intranet computer get GPO properly, it may your VPN computer using the Slow Link GPO , When your client is applying its Group Policies and it detects that the
available bandwidth between it and the Domain Controller is less than 500 kb (default value), it will only download and apply those settings within the GPO that are considered mandatory.
The settings that are not downloaded when a slow link is detected include the following:
•Disk Quota
•Scripts
•Folder Redirection
•Software Installation
•Wireless Network (IEEE 802.11) Policies
•Wired Network (IEEE 802.3) Policies
•Internet Explorer Maintenance Extension
The related aritlce:
GPOs and Slow Link Detection
http://blogs.technet.com/b/musings_of_a_technical_tam/archive/2012/02/27/gpos-and-slow-link-detection.aspx
“Configure slow-link mode” policy on Vista for Offline Files
http://blogs.technet.com/b/askds/archive/2009/02/11/configure-slow-link-mode-policy-on-vista-for-offline-files.aspx
The related KB:
Specifying Group Policy for Slow Link Detection
http://technet.microsoft.com/en-us/library/cc781031(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Client side firewall via GPO question

I am in the process of testing a new client side firewall that will be enforced via GPO, domain, public and private. So here is my question, I would like to remove all firewall rules that have been added locally. I have set firewall merging to "No"
to not allow local firewall config. So on my test machine, the firewall GPO is in effect, it is enforcing the rules i have configured so far, however, it does not remove the rules that were present prior to testing.
Here is a piece of an article i found while researching;
**Another question related to this is about how to prevent the local users from being able to create rules. While you can’t prevent the users from creating a rule you can prevent the rules created by users from being applied (BTW the rule will still be displayed
in the GUI) by using the “Apply local Firewall Rules” setting. Again a user cannot create a rule to override a block rule from group policy.
In the interest of full disclosure a user could potentially override the “Apply local Firewall Rules” setting as documented in the MSDN article.
technet.microsoft.com/en-us/library/cc755191(WS.10).aspx
The logging policy can be overridden by the local policy because the merger law is set to on.**
Reading that, it appears as though even though the local user can create a rule, example: Skype, that rule wont actually work due to the firewall being enforced by GPO and merging not allowed? Is that correct?
Also, is there a way to completely remove all firewall rules that are not pushed from the GPO?
Hopefully im being clear on this, but will add info with any questions you may have
Server 08 r2 , windows 7 clients
Thanks in advance

Hi -
This forum is dedicated to Rights Management Services, which cannot help you with your current issue. I suggest reposting your question in the Windows Server forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Thanks!
Micah LaNasa
Synergy Advisors
synergyadvisors.biz

Client Side Rendering on Terminal Servers

I’m having horrible printer issues on my Terminal Servers such as slow printing, slow to add printers, some applications load slowly because they are enumerating the list of printer (thanks Procmon), slow logons, etc. I'm trying to get Client Side Rendering
(CSR) disabled. From what I can tell it still appears to be on. Terminal Server are Windows Server 2008 SP2 x86.
On my print servers I have verified that all printers have Render print jobs on client computer unchecked. I have a Group Policy linked to the OU that the Terminal Servers are in that has
Always render print jobs on the server set to enabled. Per
http://blogs.technet.com/b/askperf/archive/2008/02/10/ws2008-client-side-rendering.aspx I have verified that on each Terminal Server in
HKLM\SOFTWARE\Policies\Microsoft\Windows NT\Printers the
ForceCSREMFDespooling value is present & set to 1 so the GP is being applied.
However I still have tons of entries in HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider\Servers\<SERVERNAME>\Printers.
I have found KB958656 which seems to describe my problem that CSR is not being disabled. However one of the files it updates is older than a file that I have (win32spl.dll) & one is newer (printcom.dll).
Printcom.dll in hotfix is 6.0.6001.22288 mine is 6.0.6001.18000
Win32spl.dll in hotfix is 6.0.6001.22288 mine is 6.0.6002.18005
Has anyone else seen this behavior & been able to get CSR disabled?
Has anyone else had success with the KB hotfix mentioned or know whether or not installing it would causing any issues (since it has that older file)?
Thanks in an advance to any input.
Patrick Hoban
http://patrickhoban.wordpress.com

Alan/Patrick,
Hi, sorry, went away on leave for a while so didn’t respond.
Alan – our case was REG:112081612189183.
For someone who has been dealing with MS support for about 20 years, this was the most disappointing of any support call I’ve ever had raised – to have the call shut
down, without a perfmon trace, process explorer analysis, or hang dump analysis (of spooler) – and simply blame “3<sup>rd</sup> party drivers” without any proof – is utterly deplorable.
Anyway, for anyone’s benefit who has similar problems – trying to do direct printing from RDS – I’ve managed to get a solution working.
Here are the details;
A nightly print spooler clean-up script that;
Stops the spooler
Deletes the entire key under “HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider”
Re-creates the key (empty) and sets the value "RemovePrintersAtLogoff"=dword:00000000
Note, this was vital.
MS support had recommended we set this to 1, along with some other keys (InactiveGuidPrinterAge,
InactiveGuidPrinterTrim) with specific values. If we used these MS support recommended values, our RDS serer would not enumerate printers for more than 3-4 hours before requiring a restart of the spooler.
Restart the spooler
Map a printer (just to make sure it works)
Clean up the USERS\.DEFAULT\Printers key on all existing servers
There was heaps of crap here, the default user NTUSER.DAT was over 800MB in size
Modify the security on the registry, using GPO to deny SYSTEM write access as below, to stop the crap writing here again;
USERS\.DEFAULT\Printers
Deny Set value
Deny Create Subkey
Run NGREGOPT on all servers to compress the DEFAULT and SOFTWARE hives back down.
Even though we had deleted the crap from “Client Side Rendering Print Provider” and the DEFAULT user hive, the registry files were still large of course, and needed to be compressed to reduce
paged pool usage.
Note, make sure no users are on the server when this is run !
With the nightly spooler ‘refresh’ and the registry security changes, we are no longer seeing any problems.
In addition the paged pool has gone down from 5GB to 1GB – which I believe was related to the registry bloat that had occurred previously.
Cleaning up the keys and using NGREGOPT has fixed this.
In addition, I am running a spooler check script every 30 minutes on each of the 13 servers.
This script checks how long it takes to enumerate the printers for the specific test user.
If it takes more than 20 seconds, we get an alert.
Since I have made the changes above, we no longer have any printing problems… touch wood.. even using HPD 5.4 for most printers, and other (RICHO) 3<sup>rd</sup> party
drivers.
If anyone wants the scripts (the spooler refresh or the check script) let me know on david.frith<at>glfconsulting.com.au
ta

Net Use in Script Client Side Extension

Hi,
I just rebuild my home Network. In my old home Network I had my loginscripts added to each user in AD. However - now I want to move my Loginscripts to GPO. So I added a batch to User Configuration\Policies\Windows Settings\Logon
The script is just a simple net use Batch.
But after logon and multiple GPUpdates - drives were not mapped. So I started to troubleshoot.
First I thought the script wasn't started. And yes there were some Problems:
- Sync Processing,
- Local Intranet for \\domain.name\sysvol
But it still didn't work. Executing the script from
\\domain.name\sysvol... mapped the drives.
So I changed the script to vbs and added a msgbox now() - and I got a messagebox during logon. But still no drives mapped.
If I map the drive by Configuration\Preferences\Windows Settings\Drive Maps - the drives will be mapped.
If I add the script to the user object in AD - I also works.
So maybe I am wrong - but is there a Problem to map drives in Script Client Side Extensions?
I searched the web - but didn't find a clear Statement.
thx in advance

Hi,
Since the issue persists when you turned off UAC, I suggest you could try to enable the following policy setting “Always wait for the network at computer startup and logon”
to see if it works at this time. You could configure it from the following path in GPMC:
Computer Configuration\Administrative Templates\System\Logon\. For details, please refer to the following article.
Description of the Windows Fast Logon Optimization feature
http://support.microsoft.com/kb/305293
In addition, I suggest you’d better map these drives via GPP. It will reduce your logon scripts. Here is an article as reference, hope it helps.
GP Preferences Will Reduce Logon Scripts : Mapping Drives
http://blogs.technet.com/b/grouppolicy/archive/2009/02/11/gp-preferences-will-reduce-logon-scripts-mapping-drives.aspx
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Server-side VPN detection

I came across an interesting post on server-side VPN detection, and am posting it here since it is of some relevance to Freedome users in this community.
https://medium.com/@ValdikSS/detecting-vpn-and-its-configuration-and-proxy-users-on-the-server-side-1bcc59742413

I suspected that was the issue - no way for the local system to know when to route to VPN or local.
Problem with changing the network ranges is often the client network is not something I control - 'client' offices, wireless hotspots, hotels, etc.
Changing the server network while not impossible would be difficult as everything from printers, servers, network switches, not to mention how X Server so easily allows changing it's primary IP, are effected.
I can certain test that this is my only problem by reconfig'g my home setup.
I'm guessing a simpler and more flexible option in my case is creating a 10.0.2.x (VPN only) network internally adding an alias IPs to my XServe and other servers/boxes I would need to access from VPN (which would dish out 10.0.2 client numbers instad of 10.0.1 numbers). The only tricky part is name resolution, but since I control the DNS server and search names handed to the client, I could create a vpn.ourdomain.com and that could be the primary search domain, where all the records for VPN resources would return their 10.0.2.x. Client systems would/should be referencing resources by short name (hp8150).
Does that make sense - a VPN network on top the existing server network?
XServe Dual G4

What permissions are needed on the client side for RunspaceFactory.CreateRunspace?

Hi.
I am running a remote powershell command from an IIS application to an Exchange server getting the below error. Everything works fine if the IIS application pool identity is in the local administrators group on the IIS server so we can rule out issues with
firewall or anything on the Exchange server. It is a problem with lack of privileges on the local server.
So my question is: What permissions are required on the local server for RunspaceFactory.CreateRunspace? I find good documentation on the permissions required on the server side, but nothing about the client side.
The last Win32 error code after failure is 1008.
An internal error occurred.
at at System.Management.Automation.Remoting.Client.WSManClientSessionTransportManager.Initialize(Uri connectionUri, WSManConnectionInfo connectionInfo)
at System.Management.Automation.Remoting.Client.WSManClientSessionTransportManager..ctor(Guid runspacePoolInstanceId, WSManConnectionInfo connectionInfo, PSRemotingCryptoHelper cryptoHelper)
at System.Management.Automation.Remoting.ClientRemoteSessionDSHandlerImpl..ctor(ClientRemoteSession session, PSRemotingCryptoHelper cryptoHelper, RunspaceConnectionInfo connectionInfo, URIDirectionReported uriRedirectionHandler)
at System.Management.Automation.Remoting.ClientRemoteSessionImpl..ctor(RemoteRunspacePoolInternal rsPool, URIDirectionReported uriRedirectionHandler)
at System.Management.Automation.Internal.ClientRunspacePoolDataStructureHandler..ctor(RemoteRunspacePoolInternal clientRunspacePool, TypeTable typeTable)
at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal..ctor(Int32 minRunspaces, Int32 maxRunspaces, TypeTable typeTable, PSHost host, PSPrimitiveDictionary applicationArguments, RunspaceConnectionInfo connectionInfo)
at System.Management.Automation.Runspaces.RunspacePool..ctor(Int32 minRunspaces, Int32 maxRunspaces, TypeTable typeTable, PSHost host, PSPrimitiveDictionary applicationArguments, RunspaceConnectionInfo connectionInfo)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspacePool(Int32 minRunspaces, Int32 maxRunspaces, RunspaceConnectionInfo connectionInfo, PSHost host, TypeTable typeTable, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.RemoteRunspace..ctor(TypeTable typeTable, RunspaceConnectionInfo connectionInfo, PSHost host, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(RunspaceConnectionInfo connectionInfo, PSHost host, TypeTable typeTable, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(RunspaceConnectionInfo connectionInfo)

Thanks Daniel.
I see that the IIS server has a GPO setting 'Allow log on locally' to the local administrators group for this server. I will order add of the IIS app pool identity to this list.
I tried the process monitor comparing runs with and without the app pool identity as local administrator. The runs are identical up to the point where one does something useful and the other closes 'HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN'.
There are no failures.
I am not using my runspace objects for multiple threads. I dispose after use.
I will end up with the below if I change. Comments?
public static PowershellResult RunPowerShellCommandExchange2010(string exchangeServer, string command, ICollection<KeyValuePair<string, object>> parameters, string usr, string pwd) {
WindowsImpersonationContext impersonationContext = null;
try {
impersonationContext = WindowsIdentity.Impersonate(IntPtr.Zero);
GetProcessInformation();
try {
var connectionInfo = GetExchange2010ConnectionInfo(exchangeServer, usr, pwd);
using (var runspace = RunspaceFactory.CreateRunspacePool(1, 1, connectionInfo)) {
using (PowerShell powershell = PowerShell.Create()) {
var psCommand = new PSCommand();
if (parameters != null) {
psCommand.AddCommand(command);
foreach (KeyValuePair<string, object> parameter in parameters) {
if (parameter.Value == null) psCommand.AddParameter(parameter.Key);
else psCommand.AddParameter(parameter.Key, parameter.Value);
} else {
//if parameters argument is null the command will be treated as script
psCommand.AddCommand(new Command(command, true));
powershell.Commands = psCommand;
runspace.Open();
powershell.RunspacePool = runspace;
var resultPSObjects = powershell.Invoke();
var psResult = new PowershellResult {
PSObjects = resultPSObjects,
Errors = powershell.Streams.Error.ToList()
return psResult;
} catch (Exception ex) {
var windowsIdentity = WindowsIdentity.GetCurrent();
int errorCode = Marshal.GetLastWin32Error();
if (windowsIdentity != null) throw new Exception(string.Format("Failed to run Exchange powershell command '{0}' as user {1} passing executing user {2} due to: {3} at {4}. Server: {5}. Last error code: {6}", command, windowsIdentity.Name, usr, ex.Message, ex.StackTrace, exchangeServer, errorCode), ex);
throw new Exception(string.Format("Failed to run Exchange powershell command '{0}' as unknown user passing executing user {1} due to: {2} at {3}. Server: {4}. Last error code: {5}", command, usr, ex.Message, ex.StackTrace, exchangeServer, errorCode), ex);
} finally {
if (impersonationContext != null) {
impersonationContext.Undo();
Tore Olav Kristiansen

How to generate rule log on client side

I am looking for a solution where I could generate a rule log and make it available on client side. I know generating a log during consolidation and save it on server. However, I want to make it available on client side.
I have created four scenarios in HFM application, namely -
1. ACTUAL_REPORTING - To capture TB data and use it for reporting
2. ACTUAL_ICP - To capture ICP data and run custom business rule as per requirement
3. ACTUAL_ADDINPUT - To capture additional memorandum inputs
During consolidation,data is copied from ACTUAL_ICP and ACTUAL_ADDINPUT to ACTUAL_REPORTING. However, problem is that user should consolidate ACTUAL_ICP AND ACTUAL_ADDINPUT scenarios first. If they miss executing the consolidation in these scenarios, then the data copied would be wrong. Just as to ensure this, there's a provision is HFM to check calculation status in rule file and looking at that, calcuation could be stopped and a message could be sent to the user. But delimma is, how to report the same on the user side.
Possible solution that I could have thought are -
1. To generate a rule log and post the same to the client, but how to do this? As path of the rule log could be of the server only (that is C:\Hyperion\Logs\Rule)
2. To generate a rule log and pop a web page terminating consolidation, but how to do this?
3. To raise an error from the rule file and direct it to the system messages, but how to to this?
Please advice and any further clarification is required please contact me.
Thanks & Regards,
Mustafa

You can define the output folder as a share, which has already been mentioned. I strongly advise against implementing any solution that in production will regularly generate an external file.
1) The output file is generated by the DCOM user. If you want this user to generate a file in a specific location, it must be writeable by the DCOM user, and readable by the intended human user. Make sure both NTFS and share level permissions on the target file and its containing folder consider this. Latency for the file write can degrade performance.
2) Most HFM implementations have two or more HFM application servers. You have no control over which server will execute the file, and also no control over what happens if two or more servers try to write to the same file. You can create a process which causes HFM to become single threaded if every time Sub Calculate for any entity on any server needs to open a single file. This is because the file object is single threaded. It could be multi-threaded if you write out to a database, but certainly far more complex.
3) Wait state: while as in #2, this can single thread the process, and you have to consider whether your process will error out during moments when another process has access to the file, or if you will ignore that and simply proceed. This can have a significant impact on performance time if you decide to wait until the file becomes available.
While I have done implementations where the overall solution required combining data across multiple scenarios, I consistently find this a cumbersome, error-prone, and poorly performing approach. For this reason, I always try to keep all of the data required in a single scenario. This is one key reason why the "DataSource" or "DataType" (or whatever you call it) approach is so popular and successful.
Finally, you cannot write to the HFM system messages. You can, on the other hand, use Calc Manager to write out to a system log.
--Chris

Client side event for h:outputText... and other JSF component

Hello friends...
I need client side (to use Java script ) event for change in <h:outputText /> or <h:inputText...>.
I want to open a popup window when there is a change in there. I donot want to use onblur() for this. Is there any thing for achiev it.
Thanks.
Regard
Roshan Lal ( I don't know why there is "DOG" display in LIST )
:-)

Hi Jacek,
Unfortunately I think you may be stuck extending Renderer. Another possibility is creating your component via a template, which will be available in JSF 2.0. However, as JSF 2.0 won't be out for a while... you can use JSFTemplating in the meantime:
http://java.sun.com/developer/technicalArticles/J2EE/jsf_templating/
http://www.theserverside.com/tt/articles/article.tss?l=JSFTemplateComponent
Good luck!
Ken Paulsen
https://jsftemplating.dev.java.net

How can i load file into database from client-side to server-side

i want to upload file from client-side to server-side, i use the following code to load blob into database.
if the file is in the server-side, it can work, but if it in the client-side, it said that the system cannot find the file. i think it only will search the file is in the server-side or not, it will not search the client-side.
how can i solve it without upload the file to the server first, then load it into database??
try
ResultSet rset = null;
PreparedStatement pstmt =
conn.prepareStatement ("insert into docs values (? , EMPTY_BLOB())");
pstmt.setInt (1, docId);
pstmt.execute ();
// Open the destination blob:
pstmt.setInt (1, docId);
rset = pstmt.executeQuery (
"SELECT content FROM docs WHERE id = ? FOR UPDATE");
BLOB dest_lob = null;
if (rset.next()) {
dest_lob = ((OracleResultSet)rset).getBLOB (1);
// Declare a file handler for the input file
File binaryFile = new File (fileName);
FileInputStream istream = new FileInputStream (binaryFile);
// Create an OutputStram object to write the BLOB as a stream
OutputStream ostream = dest_lob.getBinaryOutputStream();
// Create a tempory buffer
byte[] buffer = new byte[1024];
int length = 0;
// Use the read() method to read the file to the byte
// array buffer, then use the write() method to write it to
// the BLOB.
while ((length = istream.read(buffer)) != -1)
ostream.write(buffer, 0, length);
pstmt.close();
// Close all streams and file handles:
istream.close();
ostream.flush();
ostream.close();
//dest_lob.close();
// Commit the transaction:
conn.commit();
conn.close();
} catch (SQLException e) {

Hi,
Without some more details of the configuration, its difficult to know
what's happening here. For example, what do you mean by client side
and server side, and where are you running the upload Java application?
If you always run the application on the database server system, but can't
open the file on a different machine, then it sounds like a file protection
problem that isn't really connected with the database at all. That is to
say, if the new FileInputStream (binaryFile) statement fails, then its not
really a database problem, but a file protection issue. On the other hand,
I can't explain what's happening if you run the program on the same machine
as the document file (client machine), but you can't write the data to the
server, assuming the JDBC connection string is set correctly to connect to
the appropriate database server.
If you can provide some more information, we'll try to help.
Simon
null

Print text file to client side printer

Hi all,
I have a character mode report which will print to a client side dot matrix printer in 6i. After converted to 10g, we cannot print to the client side printer (because we don't want to map so many print queue from the AS).
So, I try to generate the report to a text file, then use webutil to transfer the txt file to the client PC, and then use Client_HOST to call the window PRINT command to print the text file to the client side printer.
I have test this is successful, however, when I try to do the same thing to a report with Vietnam character, then it is not.
The print request is sent to the printer, but the printer have no response.
But that file can be print successfully if I open in Notepad and then print manually.
I try to use window TYPE command and COPY command, but still have no luck.
Can anyone give me some suggestions for this....
Thanks!

Qiu (guest) wrote:
: In the browser/applet, the default "print" button can only
print
: screen to local printer, not the data I want. Use Report
server,
: I can't directly print to client side printer. Is there a way
to
: print data to local printer after press a button?
Are u using Run_Product function in the when button pressed,
then u can specify the format in which u want the output, option
available are HTML and PDF, report server runs the report on the
server and sends the output to the client machine. On the client
machine u have to open the file and print it. I cannot print the
report itself on the client machine.
Try.
Sailesh
null

How to Print Crystal Report without any dialog message on the client side

Hi!
I've read too much questions like this, but i can't find any answer.
How can i print a report on the client side directly?
I have three buttons, "Generate Report", "Generate PDF", "Print".
I want when the "Print" button was clicked, automaticaly the report is printed using default printer, like PrintToPrinter function, but in the client side.
Thanks!

If you search for previous posts about this, you will see many posts saying not possible. If this functionality was possible, you could essentially have a page that would send something to a clients printer just by visiting the page, how bad of security hole would that be?

Crystal report printing in client side

Hi ...
I have using asp.net web app with crystal report version 10.5.3700.0
I have uploaded the project and database in the below link. Check out.
http://www.2shared.com/file/vHTSGl13/ASPnet_Webapp_using_CR_Rpt_Pri.html
http://i52.tinypic.com/2rdds7d.jpg
I have few requirement in the crytsal report asp,net page:-
1) If user click Print button of crystal report viewer toolbar then it goes to PDf then its show me all of my pages instead of showing me the current page on which i click print.
2) I want to use client side print..if user click on a my print button then i need to show print dailogue like image above in that if user click print then i need to print that current page.. let us consider im viewing I3 Invoice number using Crysatl report viewer Navagition then it show me as 3/7 in toolbar if user click on my print button then i need to print the page 3 only.. coz user clicked print on Page3.
3)My asp.net web app is in Hosting server if user click my print button then i need to show client print dailogue and it will show my cleint connected printer. Here crytsal report toolbar and other things should be hide. It should be like what we have designed in crystal report that alone should be get printed.
4) One more thing i want is if user gives I4 invoice no. in my textbox1 then click view report button then it will show that Invoice Report now its shows two pages, here if user click print then i need to print two pages coz it has two pages...
Please do a code using my webapp which is above and waiitng for your codes..
Thank you
Note: please do a code so that i can know, i already visited some of the website like http://aspalliance.com/ i didt undertstand how to do so im posting here to get a code.

*i tried this also but it show me the same only hosting server printer not a client side printer*
if (System.Drawing.Printing.PrinterSettings.InstalledPrinters.Count > 0)
            foreach (String myPrinter in System.Drawing.Printing.PrinterSettings.InstalledPrinters)
                cboCurrentPrinters.Items.Add(myPrinter);
            cboCurrentPrinters.SelectedIndex = 0;
        //For printers exposed to System account as per MS Kbase
        //http://support.microsoft.com/default.aspx?scid=kb;en-us;184291
        //Look to HKEY_USERS\.Default\Software\Microsoft\Windows NT\CurrentVersion\Devices
        Microsoft.Win32.RegistryKey mySystemPrinters =
                Microsoft.Win32.Registry.Users.OpenSubKey(@".DEFAULT\Software\Microsoft\Windows NT\CurrentVersion\Devices");
        foreach (String defaultPrinters in mySystemPrinters.GetValueNames())
            cboDefaultPrinters.Items.Add(defaultPrinters);
        if (cboDefaultPrinters.Items.Count > 0)
            cboDefaultPrinters.SelectedIndex = 0;
help me in this.. its very urgent needed..

Problem in creating client side PDF with image using flex and AlivePD

I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
Thanks in advance
Atishay

I am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing?

How to use KeyChain API from client-side HTML scripting in Safari on iPad?

I have a requirement where I need to add client-side scripting in an HTML page to be supported by Safari on iPad that creates a private / public key pair and that creates a CSR (Certificate Signing Request) in PKCS#10 or SPKAC format that can be sent to a certification authority server using form HTTP/POST that will then return the generated certificate.
I initially thought that I could simply use the HTML 5 tag <keygen> which can do exactly what I need, but unfortunately this tag is not at all supported on mobile Apple devices like iPad or iPhone, so I have to look for another solution.
I have noticed that the KeyChain tool should be available on iPad using the documented API, but I have no idea based on the documentation whether the API can be called from client-side HTML scripting on iPad.
Question : is it technically possible using the functionalities and API's exposed on an iPad to implement what I just described in HTML client-side scripting? If so, do you have some links with useful information that can help me on my way?

I have a requirement where I need to add client-side scripting in an HTML page to be supported by Safari on iPad that creates a private / public key pair and that creates a CSR (Certificate Signing Request) in PKCS#10 or SPKAC format that can be sent to a certification authority server using form HTTP/POST that will then return the generated certificate.
I initially thought that I could simply use the HTML 5 tag <keygen> which can do exactly what I need, but unfortunately this tag is not at all supported on mobile Apple devices like iPad or iPhone, so I have to look for another solution.
I have noticed that the KeyChain tool should be available on iPad using the documented API, but I have no idea based on the documentation whether the API can be called from client-side HTML scripting on iPad.
Question : is it technically possible using the functionalities and API's exposed on an iPad to implement what I just described in HTML client-side scripting? If so, do you have some links with useful information that can help me on my way?

Save report on client side in three tier architecture

Hi,
We have a 3 tier 10g R2 Application server installed on Unix.
We want to generate and save report directly to a location on client machine.
But when we try to do that report is saved in server and not on client machine.
Can anyone help in this regard?
Av.

Hi,
We are aware of this method, but this is causing following problems to us -
1. Report name concurrency, we will have to change existing coding to a large extent to make sure same report when generated by different users should have seperate names so that there is no conflict.
2. To transfer to client machine there can be access right issues, though we have not tested this aspect.
So was thinking if there is any other way through wich we can directly save the report on client side rather than transfering file between AS and client?

GPO on Client side VPN

Similar Messages

Maybe you are looking for