GPO/Script to change Network card priority In windows 7

I would like to have script or GPO change network card priority .
I would like to have LAN should over come WIFI

Hi,
Since there is no response from you, we considered that you have gotten what you want in previous post.
For further question, please don't hesitate to come back here and let's discuss again.
If you have any feedback on our support, please click here
Kate Li
TechNet Community Support

Similar Messages

Is it possible to change network adapter priority in windows 7 by command line?

Ik need to change my users network adapters so that the LAN network adaperts have a higher priority than the WLAN adapters.
I would prefer to do it trouhg a command line so that is can distrubute it with SSCM.
Can annybody help me??

I've found the following Blog article for you:
http://win7settings.blogspot.be/2012/04/how-to-set-network-adapter-priorities.html
From the Command Line
Unfortunately there is no out-of-the-box command line interface for these Advanced settings described above. Luckily, there are two ways to set the priorities from the command line. The more difficult way is to set metrics for each network adapter (using netsh). The much easier way (easier to manage too) is to use nvspbind made by Microsoft. If you set the priorities using nvspbind, the effects can also be seen in the Advanced settings in ncpa.cpl. Here is how you use nvspbind:
Go to http://archive.msdn.microsoft.com/nvspbind and download nvspbind. Extract the nvspbind.exe and copy it to the target machine and run:
nvspbind.exe /++ "Wireless Network Connection" ms_tcpip
nvspbind.exe /++ "Wireless Network Connection" ms_tcpip6
nvspbind.exe /++ "Local Area Connection" ms_tcpip
nvspbind.exe /++ "Local Area Connection" ms_tcpip6
And that's it! You're done.
This will set the priorities (IPv4 and IPv6) to:
1. LAN
2. WLAN
3. WAN (if present)

How to build systemd script for usb network card?

My network card is usb0, is there any method to let systemd workable?

> Alternatively, you could use [email protected], but as with the above, you need to read about how it works first.
I've done by this method, but sometimes my usb card is not ready, then the boot sequence failed on the network connection.
> If you only want it when you plug the device in, write a udev rule.
I think I should change to use this method.
Is the add udev rule method still in
https://wiki.archlinux.org/index.php/Ud … ork_device
I'm afraid it should replaced by systemd method because I want when network connecting will trigger other systemd scripts enable.

Change network card

My computer has 2 network card one onboard and one Com the the onboard is elx0 the Com is elx1 But . solaris 10 dose not have drives for elx0 but solaris 10 has the drive for elx1 . So how do I get solaris to use elx1 when I install instead of the elx0 . Because when I install the said it is trying to auto conf exl0 Then it said sleeping-retry .

Hi,
Since there is no response from you, we considered that you have gotten what you want in previous post.
For further question, please don't hesitate to come back here and let's discuss again.
If you have any feedback on our support, please click here
Kate Li
TechNet Community Support

Change network location on a domain controller

This thing is driving me crazy. I have a virtual server with Windows Server 2012 R2. It has one NIC, which gets the internet address through the hosting company's dhcp. It is a public IP address. I've installed the Microsoft Virtual Network Adapter, which
has a Static IP of 10.0.0.1. The server was upgraded to be a domain controller.
Now the problem: it detects both networks as domain joined and puts them under the same domain profile of the firewall, although it should put NIC1 another the public profile, and NIC2 (the virtual one) under domain.
I've tried every possible thing I could think of. Going through GPO's to change network location, then blocked everything on port 389 on the firewall, so he cannot find himself put the NIC under the domain (I actually tried blocking every outgoing and incoming
connection on the firewall, it does not work), I even tried changing the registry. Nothing helps. It still puts the two cards under domain profile.
Any ideas?

Hi,
Multi-homing a DC is not recommended.
http://blogs.dirteam.com/blogs/acefekay/archive/2009/08/03/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters.aspx
There is a similar thread:
Change network location on Domain Controller
http://social.technet.microsoft.com/Forums/en-US/ba92eede-e0a4-4fa0-8b4f-f386a45558e0/change-network-location-on-domain-controller?forum=winserverDS
Regards.
Vivian Wang

Windows, RAC and network card problems... ?

Dear friends,
I've a problem! :)
Here are some info:
Node Hardware:
     Processor: Intel(R) Xeon(R) CPU E7430 @2.13GHz (2 processors)
     Installed memory(RAM): 52.0 GB
     System type: 64-bit OS
     Windows edition: Windows server 2008 R2 Enterprise
Network cards (Shown by WIN):
     PublicLAN: HP NC373i Multifunction Gigabit Server Adapter
     PrivateLAN: HP NC373T PCle Multifunction Gig Server Adapter
     Offline: HP NC373T PCIe Multifunction Gig Server Adapter
Software:
     Windows 2008 R2 Enterprise (Very last updates from MS)
     Oracle RAC 11.2.0.2.0 (Clusterware, DB) – 2 nodes
Environment:
     AD network. Everything is MS based.
Problem description:
During RAC installation, company had only one network card (server network card, per node). Installation was successfully finished. RAC was/is in production. Has some problems, but noting for alarm.
This days, we get other network cards. (purpose: network redundancy).
RAC shutdown was clean.
Network card inserted to nodes by OS Admin.
Nodes was started up... and...
OS Admin disabled network card immediately after logon screen was available... but to late...
Windows changed network card order!!! PublicLAN was not at the first place when Cluster started (Network and sharing center -> change adapter settings -> Advanced (from menu) -> Advanced Settings -> Adapters and Bindings)!!! (I found in logs that MAC address changed at this point!)
Cluster started hardware reconfiguration... and... we could not stop CW till starting up finished... ! After stopping CW again, we set PublicLan at first place, and every win setting was as at the moment of installation.
Cluster was started again, DB, OEM too...
Everything is working. Client can connect to DB, applications work well... but...
Damage is done... now we have totally new IP situation inside... changes are saved to the DNS, too!!!
Before inserting network card IP settings (nslookup from any client) :
rac1 192.168.217.60
rac1-vip 192.168.217.62
rac2 192.168.217.61
rac2-vip 192.168.217.63
rac-scan 192.168.217.64
192.168.217.65
192.168.217.66
After this incident (nslookup from any client):
rac1 192.168.217.60
192.168.217.62
192.168.217.64
192.168.217.66
rac2 192.168.217.61
192.168.217.63
192.168.217.65
192.168.217.66
VIP and SCAN IP address are the same as before...
nslookup show as that rac1,rac2,rac-scan change IP addresses in round-robin scenario!!!
We stopped RAC couple of time and OS Admin cleared DNS records (both zone)... but every start of cluster make changes again in DNS.
Other "side-effects":
Some cluster commands, invoked from CMD, fire errors (lsnodes, cluvfy comp nodecon -n rac1,rac2).
Configuration files seem to be correct (listeners, scan, scan_listeners, etc). srvctl and crsctl command are working without errors. oifcfg too.
Logs are full of errors (like: ASM could not be reached... no listener)
Listener(s) stop working sometime...
Relocation of resource are not possible.
Well, I mentioned the most important things... other alerts and errors in logs are present, but everything is connected with this issue, I think...
As I said: RAC working. Clusterware, DB, OEM, connections, applications, backup... everything look good... but we have a problem!!!
Any ideas, any suggestion, any link, any advice, anything are welcome!
Thanks!
PS.
Metalink haven't any document about this... I've found a lot of examples for changing IP's, interfaces, interconnection... but noting about fixing problem!

I'm having the same issue. My desktop pc keeps dropping the connection to my network (airport extreme router) while the rest of my devices (macbook pro, xbox, mac mini) still stay connected. The pc never had this issue prior to installing Windows 7 so im guessing there must be something with the Windows 7 OS.

New network card

I want to change network cards. Is is possible to change the network card without going through the install process? I would like very much to retain the other contents of the disk. Any suggestions?

I hope you don't mean redo the "whole 3-CD" deal! (I did that twice till I found the right docs).
I read to use "touch /reconfig ; shutdown -g0 -y -i 0" when a new network card is installed. When I boot the file is gone - so I think that is supposed to be, well, less destructive than "sys-unconfig".
There's allways "sys-unconfig ; boot -r" (on my machine booting was automotic!). It doesn't do everything but it will let you re-do the network config screens (it returns mny items to "factory default" state). Better read the manpage first though! It might "factory default" something you've setup!

Boot Camp Windows 8.1 Installation Did Not Install Network Card

I just installed a Windows 8.1 Boot Camp partition on a new Mid 2013 MBA. The install ran the support software and installed the drivers. However I don't show any network cards in my Windows 8.1 installation. I reran the support sw manually and it went through and supposedly fixed any driver errors but I still don't see a network card or have a network connection. It works just fine in my OSX partition, so it is definately a driver issue. *** do I need to do to get the network driver installed?

In Thehatters defence, this was initially posted in the MacbookPro forum and then moved to Boot Camp,
If you have any joy solving your trackpad device driver issue, feel free to post here (there might be a similar fix for my wireless adapter device)
Thanks

How do you change network location type on Server 2012?

Within Network & Sharing Center there appears to be no options available to change a network type as you could do in Server 2012?
Within Network List Manager policies everything is set to "not configured" so this should not be disabling any functionality.
Thanks.

Hi,
Firstly, if the server is domain joined, when it starts to detect the network location, the machine will contact a DC via port 389. If this detection successful, it will get the domain profile. And we cannot change it.
However, if the server is not domain joined, the domain was not found or process failed, NLA will let you to determine which firewall profile will be used, private or public.
We can do this by referring to
Turn sharing on or off or
How to change network location type in Windows 8.
Also we can refer to
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles.
All the above articles can apply to Windows Server 2012.
Hope this helps.
Jeremy Wu
TechNet Community Support

After upgrading to the new iOS7, I can't send out sms, I can receive sms, can make and receive call. I have already contacted my network provider, we changed sim card, I have tried to put my sim on other phone, and it's perfectly working. Help me pls

After upgrading to the new iOS7, I can't send out sms, I can receive sms, can make and receive call. I have already contacted my network provider, we changed sim card, I have tried to put my sim on other phone, and it's perfectly working. Help me pls.

To be honest not being able to send or recieve messages and data is a carrier issue, not a phone issue since u said that your calls are working, if i were you my first course of action would be to get a new sim card from virgin mobile, or to restore the device as new one more time, if you restore the device as new AND get a new sim card from your carrier and those features still dont work, i would take the device to an apple store

Identify Network Card Type by shell script.

Hi Everyone,
I am currently rolling out ML to about 300 Macs and as a side issue I need to identify the make and model of the network card in each machine, due to incompatibilty with some network switches.
Does anyone know how I can get the make and model of the network card by a shell script rather than having to visit each and every machine.
Regards
Chris

Thanks Linc,
That solved my issue. Far better than having to visit hundreds of machines spread over hundreds of kilometres.
Regards
Chris

HT1766 I bought a sim free phone from phones 4u and had a virgin SIM card put it in to phone now it's locked to Virgin. I want to cancel and change networks but the will not give me an unlock code can you help

I
I bought a sim free phone from phones 4u and had a virgin SIM card put it in to phone now it's locked to Virgin. I want to cancel and change networks but they
will not give me an unlock code can you help, as Virgin will not help me

You did not buy an unlocked iPhone. Only Apple themselves sell unlocked iPhones in most countries. Your iPhone locked to the first carrier used. Only Virgin could authorize unlocking of your iPhone, and if they will not, there's nothing you can do. Sell the iPhone to someone who can use it with Virgin and buy a truly unlocked iPhone from Apple.
Regards.

The name of network card is changing

Hello,
I have network card and wifi card in my notebook. I have updated udev, kernel, firefox etc. Since time the name of network card is changing. Sometimes lan is eth1 and wlan is eth0 and sometimes lan is eth0 and wlan is eth1.
It s problem for me. Becouse I dont use dhcp.
Any sugestions.

I gave this a shot and I'm still haveing the same problems.
This is my /etc/udev/rules.d/netdevices.rules:
KERNEL="eth*", SYSFS{address}="00:0d:56:b3:52:fc", NAME="eth0"
KERNEL="eth*", SYSFS{address}="00:0e:35:40:91:77", NAME="eth1"
Output from ifconfig (just to show names and macs...
eth0 Link encap:Ethernet HWaddr 00:0E:35:40:91:77
eth1 Link encap:Ethernet HWaddr 00:0D:56:B3:52:FC
It seems that udev just ignores the custom rules and its potluck on whether it comes up with the right names or not. I have another custom rule file in there as well which changes various usb cameras and stick drives into more meaning full names other then sd?1, those rules seem to be ignored as well.
[edit]Solved!
The following netdevices.rules works:
KERNEL=="eth*", SYSFS{address}=="00:0d:56:b3:52:fc", NAME="eth0"
KERNEL=="eth*", SYSFS{address}=="00:0e:35:40:91:77", NAME="eth1"
It seems that you have to use "==" in comparison operations. Did this used to be the case? I don't remember having to use them before and most examples I see use a "=" for both comparison and assignment. Did they change the rules syntax for the new version or maybe just correct an error that allowed "=" to work as "=="?
[/edit]
andy

Disable Static IP in Windows 8.1 and Windows 7 or Powershell Script to get network "connected to" value

Hi,
I´m in a situation where I need to disable static IP option on all Domain machines (workstations). I have found many different forum topics about that but nothing is suitable for me. Let me describe a situation:
* In our environment every computer have specific IP configured in DHCP (specific MAC = specific IP). Machines Must be configured DHCP enabled!
* In our environment all developers are local admins in their computers. This can´t be changed as we are IT corporation and this is our policy.
* As every IP have specific rights in Firewall to access different places then some IT guys are quite smart to change their IP to static IP that have more access then they should have.
This last thing is my main problem! We have working PKI and NPS in both WLAN and LAN so only domain and certified computers can have access to our local network. My mission is to prevent local admins to change IP addressess by themselves but I can´t find
a good solution for doing that. I have tought about Powershell script that is published by SCCM or GPO to all workstations and script idea is to find network card that is "connected to" our "domain.com" network. If this is true then automatically
DHCP will be enabled for that interface (Set-NetIPInterface -Dhcp Enabled). I know that here is an open window for some moment when script will be ran again or GPO policy will be refreshed but it´s better then nothing. In this script I have one problem - I
can´t find a solution about how to find network interface that is connected to our "domain.com"? It seems that there is no easy way to do that.
Is there any other and better solution to accomplished this situation. Any good ideas will be appreciated.
Best Regards,
Taavi

Hi,
the real answer is the one you don't want to hear: don't make your users local admninistrators.
Local administrators will always be able to get araound any security measurement you put in place. For gpo's for example, they can identify the involved registry key, configure it to their desired value and
remove privileges for everyone but themselves to write the key. Upcoming 'gpupdate' will not be able to write the values...
For your script, I would recommend to just configure all adapters to dhcp on the client computers. After all the location detection depends on the network Location Awareness service. If your users disable that one (an rermove the appropriate privileges from
registry ;) ) your script would again be useless.
That being said, as you post to the security forums my answer is focussed on the security off your solution. if you need assistance in creating this script, I would advice to post back in the Scripting guys forums (and leave out the why as you will otherwise
agin be pointed on the flawed security ;) )
I think get-connectionprofile might already be helpull on 8.1
MCP/MCSA/MCTS/MCITP

2 network cards in Windows 8.1 but can't set the correct one to Private

Hi, I already asked this question in the community forum but was re-directed here as you guys know more about multiple network cards in Windows 8.
I'm using Windows 8.1 with 2 network cards. One for my internal LAN (will call this my secure LAN which has a static IP) and one for connection to the internet (Internet LAN which is DHCP). Both networks are totally physically seperate. This is for a combination
of speed and security purposes (lot of internet traffic on the internet LAN and I want that card locked down to prevent file sharing on it)
By default, both of the cards have their network properties set to public. To date I have not found any way to set the secure LAN card to private and the Internet card to public. If I enable file sharing in the private bit of "advanced settings" and
go to the Metro settings (whatever the fancy name is) under PC Settings/Network/Connections, there is only a generic "network" icon shown (rather than 2 netowrk icons, one for each card). When clicked, this correlates to the network card connected
to the internet. I can make this card public or private by changing the "Find devices and Content" switch on or off but this does not impact the card connected to the secure LAN. I tried disabling the Internet card and re running the setup (which
this time configured the secure LAN card) which I think did allow me to change it to private but as soon as the internet LAN card was re-enabled it reverted to that one being private and my secure LAN to public.
so - The config I am left with is the wrong way round (ie the internet card set to private and my private LAN card set to public!)
Similarly, I tried using regedit. In HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles\ <Profile ID> I can change the REG_DWORD to 1 or 0 but this only impacts the private / public settings of the card connected to the
internet.
I am guessing that Windows is kind of combining these 2 cards into 1 network profile and there is some priority thing going on that it gives priority to the card connected to the internet in terms of config?
Anyone got any ideas on how to force one card to private and the other to public?
Thanks Guys.
Al.

This is caused by the default security policy which blocks file sharing with unidentified networks by making them public. (How it determines unidentified networks is another interesting question). To allow file sharing, you have to change the local
security policy to allow unidentified networks to be private.
Local Security Policy | Network List Manager Policies |Unidentified Networks
Bill

GPO/Script to change Network card priority In windows 7

Similar Messages

Maybe you are looking for