GPO settings are not applied

Hi everyone
I am using WSUS in my internal network.
When i am trying to deploy GPO, The GPO seems to be applying on the computer but the
GPO settings are not being applied.
I am getting error An error occured while checking for updates for your computer
and in Windows update change settings, i can see it is grayed out with the option
Download updates but let me choose wheter to install them(some settings are managed by your system administrator)
I have disabled windows firewall when i was using Windows XP computers, Is any settings of windows firewall creating issues?
I have created a computer group in WSUS say TESTGroup
In GPO I have assigned the following settings(Please correct me if i am going wrong with the settings)
Configure Automatic updates : 3-Auto download and notify for install
Specify Intranet microsoft update service location: http://mywsus (here should it be mywsus or mywsus:8530)
Enable Client Side targeting : TestGroup ( I have OU in active directory with Computers)
Do not display install updates and shutdown option : Enabled
Automatic Updates detection frequency : 2 hours
Allow Non administrators to receive update notification : Enabled
Allow Automatic updates immedidate installation : Enabled
Turn of recommended updates via automatic updates : Enabled
Reschedule automatic udpates scheduled installation : 10 min
I have approved few updats in WSUS console to install on TestGroup
On Client Computer ihave used the command
wuauclt /detectnow and wuauclt /reportnow
Please guide me

I have installed the updates KB2720211 KB2530678 KB2530709 KB2734608 on WSUS Server
My GPO settings are
Configure Automatic updates : 3-Auto download and notify for install
Allow signed updates from an intranet microsoft update service location : Enabled(i am using internal WSUS server exporting updates from internet connected WSUS to internal WSUS)
GPO is applying but settings are not being applied.
please do refer the client logs & attachment.
Triggering AU detection through DetectNow API
START ## AU: Search for updates
<<## SUBMITTED ## AU: Search for updates [CallId = {A52428A8-E7EC-4CAB-9842-0B66F6969382}]
** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
Agent *********
* Online = Yes; Ignore download priority = No
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
* ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
Agent * Search Scope = {Machine}
Setup Checking for agent SelfUpdate
Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
Microsoft signed: NA
Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP8FF3.tmp with dwProvFlags 0x00000080:
Triggering AU detection through DetectNow API
Piggybacking on an AU detection already in progress
Microsoft signed: NA
Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
Microsoft signed: NA
Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
Microsoft signed: NA
Setup Determining whether a new setup handler needs to be downloaded
Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe with dwProvFlags 0x00000080:
Microsoft signed: NA
Setup SelfUpdate handler update NOT required: Current version: 7.6.7600.320, required version: 7.6.7600.320
Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320"
Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
SelfUpdate check completed. SelfUpdate is NOT required.
+++++++++++ PT: Synchronizing server updates +++++++++++
+ ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://MYWSUSServer/ClientWebService/client.asmx
WARNING: GetConfig failure, error = 0x80244019, soap client error = 10, soap error code = 0, HTTP status code = 404
WARNING: PTError: 0x80244019
WARNING: GetConfig_WithRecovery failed: 0x80244019
WARNING: RefreshConfig failed: 0x80244019
WARNING: RefreshPTState failed: 0x80244019
WARNING: Sync of Updates: 0x80244019
WARNING: SyncServerUpdatesInternal failed: 0x80244019
* WARNING: Failed to synchronize, error = 0x80244019
* WARNING: Exit code = 0x80244019
** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
Agent *************
WARNING: WU client failed Searching for update with error 0x80244019
>>## RESUMED ## AU: Search for updates [CallId = {A52428A8-E7EC-4CAB-9842-0B66F6969382}]
# WARNING: Search callback failed, result = 0x80244019
# WARNING: Failed to find updates with error code 80244019
## END ## AU: Search for updates [CallId = {A52428A8-E7EC-4CAB-9842-0B66F6969382}]
Need to show Unable to Detect notification
Successfully wrote event for AU health state:1
AU setting next detection timeout to 2015-03-20 20:18:22
Successfully wrote event for AU health state:1
Successfully wrote event for AU health state:1
Report REPORT EVENT: {5BCEA64A-0FEB-4B01-9509-CE94AFE0D04A}
2015-03-20 21:19:59:003+0300 1
148 101
{00000000-0000-AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x80244019.
CWERReporter::HandleEvents - WER report upload completed with status 0x8
WER Report sent: 7.6.7600.320 0x80244019 00000000-0000-0000-0000-000000000000 Scan 101 Managed
Report CWERReporter finishing event handling. (00000000)
WARNING: GetConfig failure, error = 0x80244019, soap client error = 10, soap error code = 0, HTTP status code = 404
WARNING: PTError: 0x80244019
WARNING: GetConfig_WithRecovery failed: 0x80244019
WARNING: RefreshConfig failed: 0x80244019
WARNING: RefreshPTState failed: 0x80244019
WARNING: PTError: 0x80244019
WARNING: Reporter failed to upload events with hr = 80244019.
WARNING: GetConfig failure, error = 0x80244019, soap client error = 10, soap error code = 0, HTTP status code = 404
WARNING: PTError: 0x80244019
WARNING: GetConfig_WithRecovery failed: 0x80244019
WARNING: RefreshConfig failed: 0x80244019
WARNING: RefreshPTState failed: 0x80244019
WARNING: PTError: 0x80244019
WARNING: Reporter failed to upload events with hr = 80244019.

Similar Messages

Windows Server 2012 GPO setting are not apply on windows Xp clients

Hi
I am create GPO on windows server 2012. 300 clients on domain are working fine, GPO setting apply on all windows 7, 8 clients. But 200 clients of windows XP are not working. GPO setting are not applies on XP. I am trying to Group Policy
Preference Client Side Extensions for Windows XP (KB943729) on one window XP client, all GPO servers 2012 setting is working fine. But is not solution. I have 200 clients of windows XP, Please provide batter solution on one click command and apply all 200
XP clients.
Thanks.

Dear,
I have Windows server 2012 , i have install ADDS with Forest functional level 2008 & Domain functional level 2008 .
I have applied GPO to particular OU, when i login to domain user on Windows 7 PC all GPO working fine but when i login on Windows Xp SP3 PC its not applied on XP.
I am facing issue on windows XP clients it is true. Please see this URL address:
http://blogs.technet.com/b/grouppolicy/archive/2009/03/27/group-policy-preferences-not-applying-on-some-clients-client-side-extension-xmllite.aspx
Please provide batter solution on one click command
Thanks.

Settings are not saving

Hi Guys
I am fairly new to my iMac (since Christmas). Everything was working perfect and now I am noticing that my settings are not saving. Some examples are:
1. I set it so my pictures can be shared with other users. The other users of this mac still cannot pull up the pictures in their iPhoto.
2. I have the settings for software update set to check monthly. Every time I wake up my computer it checks for updates automatically.
3. The log in settings are set to log in without a password every time I wake up the mac and it still requires a password.
What is going on??? It is so frustrating, please please help???

So even after opening iPhoto, there is no file "com.apple.iPhoto.plist" in your ~/Library/Preferences folder (that is in your HOME folder, NOT the Library folder at the top level of your hard drive)?
If so, there is an issue with permissions to write to your ~/Library/Preferences folder. Go up one level to your ~/Library folder (again, the one in your HOME folder), click once on Preferences folder, then chose menu File>Get Info. At the bottom of the Get Info window, next to your user name, the Privilege column should say Read & Write.
If it doesn't say "Read & Write" next your name, you have to change it so that it does. Click on the lock icon in the lower right of the "Get Info" window, enter admin user name and password. Change the Privilege column next to your user name to "Read & Write." Then click on the little gear icon at the very bottom of the Get Info and select "Apply to enclosed items."
You might want to go through that procedure even if it does say "Read & Write" just to make sure, because it really sounds like you have a problem with permissions in the Preferences folder.

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

Sorry Photoshop -- Problems solved -- I read the details -- turns out you need to make changes with no files open for the preferences to apply to all files.
Thanks, Al

Early 08 MBPro-TCP/IP settings are not saved

On my home wireless network I have MAC address filtering enabled and broadcast SSID disabled. All MAC addresses are entered in the router's filter. An early 08 MBPro does not retain network settings for Verizon router on the network. When I look at the TCP/IP settings in network prefs I see they are nothing like other computers on my home network. If I click "assist me" then "diagnostics" in Airport setup I get walked through a process which allows me to choose the network I want to join. There is a list of available networks which does not include mine (since SSID is disabled) and a button which allows me to choose closed network, which I take. After entering my network's ID and WEP password I finally get connected and get a message that my connection is OK. Problem is, when I put the computer to sleep or restart I can't reconnect and the old settings which don't work reappear. It appears that the TCP/IP settings are not being saved. Could this be some corrupted preference of does it sound like a hardware problem? Thanks for any insights.
Message was edited by: Thomas Camilleri

Odd. You may be able to repair this with the 10.5.7 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
Oh, and please be sure to re-boot your modem and router.
-mj
Message was edited by: macjack

Selection criteria are not applied to summary fields on group footers.

I wonder if anyone can help me with this problem. I am using Crystal reports version 11.2, and my data source is a Sql Server view.
The records on the view have a date field, and I have selected all records within a given date range in "Selection Formulas".
The records are then grouped, and the Crystal summary facility used to summarise number fields on the group footers.
So for example, if my view contains four records, one with field "amount" = 2, one with field "amount" = 8, one with field "amount" = 6, one with field "amount" = 3, but only the first two records are within the valid date range, you would expect to see the first two records listed out at detail level, then field "amount" summarised at group level, with a summarised value of 10.
ie ....                record1                      2
                       record2                      8
                       group level total         10
This works fine when I run the report using Crystal's "print preview" facility. However, when the report is run from within an application written in C#.NET, the selection criteria are not applied to the summary field, so you get ..
                       record1                      2
                       record2                      8
                       group level total          19
I tried putting the date selection criteria at both record and group level, but that did not work.
I googled the problem and found an article explaining that Crystal first performs the record-level selection, then it creates the groups and totals up any summary fields, and only then does it apply the group-level selection criteria, which can lead to problems like the one I have described above. However, since I have put my date selection criteria at both record and group level, I do not understand why I still get the problem.
In one report I got round this problem by creating a formula that returned zero if the record date was outside of the valid date range, and returned the number field to be summarised if the date was valid, then summarising that formula, instead of summarising the number field directly.
In other reports I created one formula to set a shared variable as zero, then another formula to accumulate it at detail record level, then another formula to display the variable at the group footer. In other words, I did not bother with the Crystal summary facility at all, but created my own summary facility.
While googling the problem to see what other people did in this situation, I noticed that most fixes used variations of the "shared variables and formulae" fix to get round the problem.
The problem is that I have lots of complex reports and it will take ages to replace the summarised fields with shared variables and formulae. The reports were initially tested with "Print Preview" so we did not notice this problem until the C#.Net application was ready to use them. And I can't believe that you are simply meant to ignore the summary facility and re-invent the wheel by doing it all manually.
Please tell me that there is something simple that I have been doing wrong!!! If I have not given enough information for you to answer, please let me know.
Thanks,
Anne-Marie

Hi, Anne-Marie;
You may be running into a common issue that is docuemented here:
[SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
Regards,
Jonathan
Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account.

I am not able to send out an email. I keep getting the following message: This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account. Can someone help me with this?

We need some information, starting with the email provider (eg. Google, Yahoo, Bellsouth, etc)

Changes are not applying

I have made a couple of changes to a movie and they are not applying in the canvas.
EG - I have changed the colour of some text that appears. The preview icon on the clip in the timeline has changed the colour of the text, the preview in the viewer has changed, but the canvas hasnt. Also it isnt asking me to render which it usually would.

You can quickly force a render by lowering, then raising the opacity of the clip. There are also more involved/complex ways to replace a render.
-DH

The DSLR sequence settings are not showing up for me. (I bought CS6)

Like I said my DSLR sequence settings are not showing up for me even though I bought Premiere Pro CS6, I look for a solution but all that came up was that this happens with a trial verison and I don't know what to do.

Did you buy ONLY PPro, or did you buy a suite?
Did you install the program AND the extra content?
Also... More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Settings are not being saved when i reboot

i am having a problem when i restart my computer my settings such as dock settings background settings are not being saved how do i resolve this problem?

Welcome to the Apple Discussions!
Is this just for new settings that won't stick? Or have all your original settings reverted to the defaults? Have you started up from your Mac OS X install disk and used the Disk Utility to "repair disk"? Do you have a backup of your important files?
-Doug

With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
Any help would be appreciated as this is so frustrating!!

Update to 3.6.16 has fixed this problem.

Clock and date settings are not saved

clock and date settings are not saved in lion

I'd give AppleCare a call.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
You may want to look under date & time and set the clock from the internet. At least you will have the correct time after a while.
RObert

Xfce4 sensors settings are not saved properly

Xfce4 settings do not apply after boot, which is to say I have to change the settings every time after a boot. Specifically, I only need to click the 'Show' option for two sensors in the settings dialog.
The xfce4-sensors-plugin-12480173280.rc file seems okay after I've changed the settings.
[General]
Show_Title=false
Show_Labels=false
Use_Bar_UI=1
Show_Colored_Bars=true
Scale=0
Font_Size=small
Font_Size_Numerical=1
Font=Sans 12
Lines_Size=2
Update_Interval=30
Exec_Command=true
Show_Units=true
Small_Spacings=false
Command_Name=xfce4-sensors
Number_Chips=3
Suppress_Hddtemp_Message=false
Preferred_Width=400
Preferred_Height=400
[Chip0]
Name=k8temp-c3
Number=0
[Chip0_Feature0]
Id=0
Address=0
Name=Core0 Temp
Color=#00B000
Show=true
Min=0.00
Max=80.00
[Chip0_Feature1]
Id=1
Address=1
Name=Core1 Temp
Color=#00B000
Show=true
Min=0.00
Max=80.00
[Chip1]
Name=acpitz-0
Number=1
[Chip2]
Name=ACPI
Number=2

Something replaces the above working config file with the default one every time (or almost every time) I boot.. weird

Mail settings are not saved any more

Hi,
after my mailbox structure has crashed, I tried to reset Mail as explained in this answer: https://discussions.apple.com/message/22302114#22302114
After restarting Mail all settings were deleted (as expected) and I set up my accounts and settings again. Then I recognized that the settings are not saved any more. I tried some times but Mail didn't save the settings.
I hope there is a chance to fix this problem.
Thanks for help.

Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

GPO settings are not applied

Similar Messages

Maybe you are looking for