GPOs started 5 minutes after log in

Hello,
I have an Active Directory Domain controler.
I have defined GPOs, and among them there are start up scripts. I have noticed that those scripts start only about 5 minutes after being logged in.
Does any one have this issue ?
My build is 9879
Thank you

Hi,
that's not a problem, it's by design, and it has been since Windows 8.1 Update 1 and Windows Server 2012 R2 Update.
There's a new GPO setting, "Configure Logon Script Delay", which you can set to 0 or Disable to execute logon scripts immediately (and return to the behavior of previous Windows versions).
You'll find it by opening GPEDIT, then in Computer Configuration, Administrative Templates, System, Group Policy.
The corresponding Registry key is:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System\EnableLogonScriptDelay (set it to DWORD = 0)
The geniuses at Microsoft thought this was a good idea.... go figure.

Similar Messages

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

System switches to all caps minutes after log on.

For some unknown reason, several minutes after I start up and log in, something happens that causes the keyboard to enter CAPS only. I've tried multiple keyboards and get the same result. The caps lock and shift keys have no effect. It's not just the caps, but other keyboard controls are not working either.
The only way out is to restart completely. Any advice is appreciated.

Press Shift five times.
Look at Sticky Keys in the "Keyboard" tab of "Universal Access" system preference.

OS is slow for a few minutes after log in

Hi,
I operate in a two-user environment. When either of the accounts has been signed in, it takes a few minutes before programs start responding at proper speed. Even with all Login Items disabled, it can take several minutes for the OS to respond properly to launch or open commands.
This can be such a hassle that I'll log the machine in and walk away for a while, just to get past this hiccup. My wife's PB G4 responds faster than my MBP during these initial login times, and neither her PB or my old G5 seem to have this issue.
I'm running a Core 2 Duo MacBook Pro with 2 GB of RAM and OS X 10.4.10. This machine is significantly faster than the G5 it replaced, but it seems to take a lot longer to normalize after login. Is this something with one of the later 10.4 builds, the MacBook Pro, or perhaps an OS issue I need to solve with a reinstall? Anyone else have this issue?
I appreciate any advice! Thanks!
B

OK, going on your suggestion to check Activity Monitor, I noticed a process called update_prebindin running and rerunning for the first 20-40 seconds of login. I did a Google on this and discovered that a small program I occasionally use called Rosetta is to blame.
Apparently (and in paraphrasing here I could be getting it a bit wrong, but what the heck), the author decided to fix some bugs by launching this process as a workaround, even though this caused a speed hit during the first part of login - and in addition apparently it writes a bunch of needless files to disk, too! How irresponsible!
He got around to actually fixing this back in March (when an OS X update from Apple apparently made it easier for him). I have suffered since then. I'm throwing away his application, even though I paid for it and occasionally use it. It's pure poison in my book.
So the bottom line is, if you're using Rosetta or anything else from Unsanity.org, beware!
Thanks for the help -
B

Safari stops working about 5 minutes after I log in rHardware Overview:    Model Name:     iMac   Model Identifier:     iMac11,3   Processor Name:     Intel Core i3   Processor Speed:     3.2 GHz   Number Of Processors:     1   Total Number Of Cores:

Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac11,3
Processor Name:          Intel Core i3
Processor Speed:          3.2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          4 MB
Memory:          4 GB
Processor Interconnect Speed:          5.86 GT/s
Boot ROM Version:          IM112.0057.B00
SMC Version (system):          1.59f2
Serial Number (system):          W8039BSWDB6
Hardware UUID:          E7B19EBE-57F9-5EA6-B390-FC1B0ADEFCA9
OS X 10.6.8

mellfrommountain brook wrote:
When I try to log onto a new site the blue line in the text box freezes and the connection does not take place. This happens about 5 minutes after logging on.
There are many possible reasons for that.
Most likely a corrupted cookie or cache file for that site may be responsible.
On the Safari menu bar got to Safari -> Empty Cache
Then go to Safari -> Preferences and click on the 3rd symbol from right.
Click on Details -> type the name of the particular site (e.g. facebook) in the search field and delete all upcoming entry's.
Restart Safari and try again to log in on the site.
Lupunus

Long delay after logging in - WXP & M200

Hi,
When my M200 is running on batteries, most of the times I log in to the system from a cold start I have to wait for about two minutes after logging in. Opening the Task Manager learns that the CPU is idle, harddisk is idle, only few of the processes loaded; the system just seems to be waiting for something. Other programs than Task Manager cannot be opened.
Around the time the delay happens, in the System section of the Event log the following error messages are recorded:
. "Silent Running: Stress test transition: Dynamic -> Performance 3D", service "nv", event_ID: 106
. "Silent Running: Stress test transition: Performance 3D -> LowPower 3D", service "nv", event_ID: 106
nv seems to be nVidia, but reinstalling the display driver did not change a bit. When the system is running on AC power, the problem never occured.
What is happening here & how do I solve it?
Thanks for any good suggestion.
Pieter.

Hi,
in my opinion this relates to the power savings because the graphic chip is a Nvidia GeForce FX Go 5200 for notebooks. The chip is managed by the power savings and could be set to different modes.
I search in the internet about these error messages and foud something. All opinion I had read said that this only a event log entry which doesn't matter. There are some more similar expressions for other events.
Nice holidays and Xmas
Bye Rudi

TS3276 Icloud mail stops working 3 minutes after I sign in

Icloud mail stops working every time I sign in, for some reason it just freezes wherever I am working. No idea

mellfrommountain brook wrote:
When I try to log onto a new site the blue line in the text box freezes and the connection does not take place. This happens about 5 minutes after logging on.
There are many possible reasons for that.
Most likely a corrupted cookie or cache file for that site may be responsible.
On the Safari menu bar got to Safari -> Empty Cache
Then go to Safari -> Preferences and click on the 3rd symbol from right.
Click on Details -> type the name of the particular site (e.g. facebook) in the search field and delete all upcoming entry's.
Restart Safari and try again to log in on the site.
Lupunus

After logging into Windows 7, I have to double click several times on Mozilla in order for it to pop up. Then on the tool bar it will show that I have several open boxes of Mozilla.

Mozilla will not open even after several tries. It eventually will but then I have several open Mozilla boxes and have to delete each one until I have just the one.

Just sounds as though you're being impatient. Wait a minute after logging in and then double click the icon. It'll probably then load up straight away.
Each time you double-click an icon it'll launch a new instance of the application. So what you're probably doing is double-clicking 7 times, which then causes 7 copies of FF to open when your computer catches up.

Launch a job N minutes after another

Hi all,
It is me again, and I have one basic question that I haven't figure out by myself.
How is it possible to constraint a job to execute only a certain period (let's say 15 minutes) after the end of its predecessor ?
I thought that we could use preconditions but these objects can only tell to launch or skip its script and not to wait.
Have you any ideas ?
Thanks,
Regards
Yi Jiang

Hi Yi,
The more common request is to have a job start x minutes after the start time of the predecessor. This can be achieved in a two-step chain, by applying a time window on the entire chain (which will determine the start of the chain and the first step) and another time window on the call in the second step which opens 15 minutes later than the first time window.
Your request is also possible, for instance:
- create a three step chain with a 15 minute sleep in the middle (not high-tech, but very efficient and clear in the monitor)
- create a three step chain where the second step changes the start time of the third step (still clear in the monitor, and less running jobs)
- create a job with a post running action (see doc) submitting the successor in 15 minutes
Hope this helps,
Anton Goselink.

XOrg is maxxing out my CPU for several minutes after start [UNSOLVED]

Since the last update, XOrg has been using 99% of my CPU power for about three minutes after it is started. This happens whether I am using Slim, console login, whatever; I checked with top and it is definitely X that is using up the CPU power. This happens on Debian as well as Arch.
Here is my Xorg.0.log:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/skylark:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH x86_64
Current Operating System: Linux skylark 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 14 08:56:10 UTC 2008 x86_64
Build Date: 17 August 2008 10:36:51PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 28 10:54:27 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Touchpad0"
(**) |-->Input Device "Mouse0"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7c06c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1025,0110 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1025,0110 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1025,0110 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0110 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0110 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1025,0110 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0110 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0110 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1025,0110 rev 02 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 11ab,4352 card 1025,0110 rev 14 class 02,00,00 hdr 00
(II) PCI: 03:00:0: chip 168c,001c card 1468,0428 rev 01 class 02,00,00 hdr 00
(II) PCI: 0a:09:0: chip 104c,8039 card 3000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 0a:09:2: chip 104c,803b card 1025,0110 rev 00 class 01,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,11), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x34000000 - 0x340fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0x34100000 - 0x341fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:30:0), (0,10,14), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 10 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 10 non-prefetchable memory range:
[0] -1 0 0xd0200000 - 0xd02fffff (0x100000) MX[b]
(II) Bus 10 prefetchable memory range:
[0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 11: bridge is at (10:9:0), (10,11,14), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 11 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
(II) Bus 11 prefetchable memory range:
[0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[b]
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0300000/19, 0xc0000000/28, 0xd0400000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0380000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[1] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[2] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[3] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[4] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[5] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[6] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[9] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[10] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[11] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[20] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[1] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[2] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[3] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[4] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[5] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[6] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[9] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[10] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[11] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[20] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[16] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[17] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[23] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[26] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[16] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[17] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[23] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[26] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0300000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0400000 - 0xd043ffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xd0300000 - 0xd037ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[8] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[9] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[10] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[11] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[12] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[13] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[15] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[19] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[23] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[24] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[30] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[33] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 110080 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 440316 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xd0300000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000001f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000001fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000001fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000001fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 304 x 190
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "acer_laptop"
(**) Keyboard0: XkbModel: "acer_laptop"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Touchpad0 auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(**) Option "SHMConfig"
(--) Touchpad0 touchpad found
(**) Option "CorePointer"
(**) Touchpad0: always reports core events
(**) Option "Protocol" "ImPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "ImPS/2"
(**) Option "SendCoreEvents"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ChordMiddle"
(**) Mouse0: ChordMiddle
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Option "EmulateWheel"
(**) Option "EmulateWheelButton" "2"
(==) Mouse0: YAxisMapping: buttons 4 and 5
(**) Mouse0: EmulateWheel, EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Touchpad0)
(II) XINPUT: Adding extended input device "Touchpad0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad0 auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(--) Touchpad0 touchpad found
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
And my xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Touchpad0" "CorePointer"
InputDevice "Mouse0" "SendCoreEvents"
Option "AutoAddDevices" "False"
EndSection
Section "Module"
Load "freetype"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ChordMiddle"
Option "EmulateWheel"
Option "EmulateWheelButton" "2"
EndSection
Section "InputDevice"
Identifier "Touchpad0"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/input/mice"
Option "SHMConfig"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "acer_laptop"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
Option "Migrationheuristic" "greedy"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
EndSection
Section "Extensions"
Option "Composite"
EndSection
Does anyone have a clue what's going on here?
Last edited by Gullible Jones (2008-12-03 20:46:38)

So I reenabled "glx" and "DRI" and everything seems just fine. I believe the culprit in my case was simply the "NoAccel" flag being false by default.
This is now what my xorg.conf looks like:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
#RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
#Load "record"
Load "GLcore"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "dri"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "QDS"
ModelName "27"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Option "NoAccel" "true"
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "true"
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
Endsection
Section "Extensions"
Option "Composite" "Enable"
Endsection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
And everything is A.O.K.!

20" iMac takes 3 minutes to respond after log in

as the subject reads, my iMac take about 3 minutes to respond to any keystrokes or mouse inputs.
Hot corners do NOT respond, and the dock does NOT respond either.
the mouse moves and the clock ticks but no inputs are allowed.
i leave the cursor on the hot corner so i know when its done thinking and finally allows me to make inputs.(thats how i know its about 3 minutes or so until it works)
all the log in items have been removed.
still to no avail.
im conducting a Verify disk and Repair disk now.
will update soon.
i google "my imac takes 3 minutes to log on" and found another person with the same problem but its a pay site, and im not paying... hahaha.
this started happening after 10.6.1
Message was edited by: loneshark2000

How full is the hard drive? Have you repaired permissions on the hard drive?

CORESERVICESD takes 90%-100% CPU about 5 minutes after every fresh start

So, coreservicesd process takes 90-100% cpu after a fresh start. It doesn't start immediately after login but about 3-5 minutes after, and it happens +every time+ i start my computer and it lasts about 10 minutes or so before it stops eating the cpu.
I haven't figured out any way to stop this behavior. I've reset smc, emptyed /Library/Caches, clean installed Snow Leopard (without restoring from Time Machine backup) but nothing seems to help.
Does anyone here know what to do in my situation or does anyone have any new ideas what should I try to do? I appreciate every response.

OK folks, problem solved. At least mine is. No coreservcesd eating cpu anymore! Hurray! This is the second time I boot and the computer seems to run perfectly. If the coreservicesd problem comes back I'll report here.
So, what did I do:
1. Changed from 64 bit kernel + extensions to 32 bit.
2. Uninstalled SpiceRack and MozyHome Backup preference panes.
3. Repaired Premissions
4. Cleaned User Cache
5. Cleaned System Cache
6. Cleaned All Users Cache
7. Rebuilt Launch Services
8. Forced Empty Trash
9. Removed Corrupt Preferences
10. Updated Prebindings
11. Reindexed Spotlight
12. Cleaned Archived Logs
13. Cleaned All Logs
14. Flushed DNS Cache
15. Removed .DS_Store Files
16. Cleaned All Browser Caches
17. Updated Whatis Database
18. Updated Locate Database
19. Cleaned Font Caches
20. Booted from SL install dvd and ran Disk Utility's repaid disk & repair premissions.
After these operations my mac runs faster and all errors in the Console log are gone! All steps (except 1, 2 and 20) can be preformed with different maintenance apps. I used an app called MainMenu.
Message was edited by: sarukuku (fixed some spelling errors)

IMac G5 tries to start and dies after spinning cog for a minute

iMac G5 tries to start and dies after spinning cog for a minute
I did this;
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
the result was.
the 'permissions' are sometimes wrong, but they repair
the hard drive is either repaired or OK
the iMac will then restart and work fine and sometimes shut down and restart OK
after replacing the Hard Drive I actually thought I had fixed it and went to bed late but happy,
on waking in the morning, however I was not so happy it fired up and then died after dong -> apple logo -> spinning cog -> dead!!
I would be grateful for any help
Thanks
Pete

Hi Miriam,
Thanks yes,
here we go -- after running disc utilities it tells me directory OK and disk OK (or something like that) When I replaced the Hard Drive, I started 'fresh' erased/formatted the hard drive (new Seagate Barracuda 7200 500GB) and it has just got 'tiger' on it (and upgraded to whatever it is now I think I remember 4.11, I can't tell at the moment as I have got the back off) I didn't transfer any data I just took the old drive (Seagate 160GB) out and stuck the new one in.
I've just changed the battery (I didn't really think it would work, but I was still hopeful and I'd bought the battery anyway) I did the LED thing, the internal power button thing, and the resetting the SMU thing (with crossed fingers and bated breath) but -- so I'm thinking is it the power supply? I read some of Jim's weighty, but worthy tome and resolved to remove the power supply and have a look. On opening it up, it does look as though, one (at least) of the capacitors has 'blown' (by the way, just in case I sound like I know what I'm talking about, I don't of course, I'm just quoting Jim's words;-) I'd love to send you a picture of the inside of the power supply showing what I believe to be a 'blown' capacitator (and I'm going to try to send one to Jim as I think it might be useful to him and others. can I attach a photo in any way or would you like to send me your email address <Edited by Moderator>
Thanks
Pete
PS it's still 'weird' to me, why it starts and runs well, when started from tiger (or whatever) and then starts or restarts from the Hard Drive unless I leave it a few hours and come back and try to start it
again? wow it's late nearly 4.00am here in london UK.

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and als

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and also to open it as Administrator as suggested by a friend but it still refuses to work. I need direct help from Adobe but don't know how to get to them on this website as they seem to rely on user forums to advise customers.

WhiteHouse Norm
This question is already being responded to in the following duplicate thread
Premier elements 11 keeps stopping
Please reply in the other thread which has a discussion in progress.
Thank you.
ATR

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

GPOs started 5 minutes after log in

Similar Messages

Maybe you are looking for