GPRS problems after 4.0726.2.0.1 update on N73

20 days ago I updated the phone with the newest firmware. After that I did a hard format and I entered all the settigns manually, transfered back only the contacts. The phone is now amazingly fast and stable, but with few new issues:
It looses GPRS and MMS connectivity every day. I have to restart the phone once a day to reestablish gprs, or to receive the MMS that were sent to me. It looses the GPRS randomly, without starting any application. Any help?

It seems that the older version of Handy Taskman (1.05) was causing the problems.
After I upgraded with the latest (1.06) the problem didn't appear. I have stable GPRS connection for 2 days now

Similar Messages

Airport problems after 8/12 airport and security update

My MacBook Pro which had been working flawlessly since I got it last year received the airport and security updates distributed today. After the reboot my airport turns itself off after a few minutes and will not come back on and the computer seems to be running hotter than usual. Booting from a recent clone of the drive without the updates did not fix the problem and the card turned itself off a few minutes after the reboot and will not come back on.
Anyone having similar problems after the update?

Does your problem occur only when unplugged. If so, then maybe this update is for you: http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro. Check it out, but use your own judgment in installing; not much info is provided.

Nokia 500 - GPRS problem after updating to Nokia B...

Last month after the announcement of update of Nokia Belle to Nokia 500, I have updated the firmware. And it was successfull and it works fine.
But while try to browse the internet in mobile using WAP or Mobile data, I could not do so. There is a problem (Error in opening the page). Before i.e. while using Anna i regularly browsed and it worked fine. after updation only this problem arises. I have checked all the settings and all is looking correct but could not bowsing.
Pls help me.

Hi somebodyx87,
Could you please follow these steps if problem will occur again?
1. Disconnect your phone from PC if connected.
2. Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and Nokia Suite (hopefully) should detect your mobile properly now.
I hope it helps!
Cheers,
Marina
Nokia Suite team
Click on the Star Icon below if my advice has helped you!

Start up problems after Safari 3.1 and Security update

Updated safari and security update last night.
Safari downloaded and installed but there was an error downloading or installing the security update, I forgot.
After I restarted everything booted up fine, but was stuck on "Starting Mac OS X" screen.
Did a fsck and zap the pram, still stuck.
Today I tried booting up in safe mode, stuck on the gray screen with the apple logo.
Then I tried booting up from an external firewire dvd drive. Repaired permissions, repaired the disk, but it is still stuck on "Starting Mac OS X" screen. Help please...
Thank you

Ok i had a similar problem, with all the recent updates for Leopard, including the 10.5.2 combo update... the 12" PowerBook G4 kept getting stuck on the grey apple and spinning wheel... if it managed to get past this it would get stuck on the blue screen!!!
The way i got around this, after trying all these other tips was: Archived & Installed 10.5; restarted, waited; downloaded 10.5.2 Combo update, installed; restarted, waited; waited; waited; after getting back to desktop, restarted, waited; then ran Software Update only installing one at a time, and after each install, restarted, waited; when all Software updates completed, proceeded with iLife updates etc... It took a while (still quicker than the 3 days of failed installs and updates) with a lot of waiting on the blue screen (5-20mins) but we got there in the end. Disks where checked with Leopard Disk Utility before and after, permissions where checked before and after completing all installs, also with a DW 4.1 optimization. Also note worthy is the RAM was upgraded from the initial 256Mb (!!!) with an extra Gb.

HT5730 the do download has been interrupted becouse of an electricity circuit problem.After that i cannot download the update..What i have to do

The downloading of 10.8.4 was interrupted because of a problem of electricity circuit.After that it is impossible to dowload it .what i have to do to download the update 10.8.4

Always charge your battery, prior to doing updates and installations, this would not have happened if you had!
Download 10.8.4 here.

Problem after 6.3 Airport Express Firmware Update

I recently purchased Airport Express to serve strictly as an audio conduit. It was working well, when received a notice while installing software that there was an update available (6.3). I downloaded the update and install it wirelessly to my Airport Express. After doing so an rebooting, my iBook could not find it. I uninstalled and reinstalled software and the result was the same.
Any ideas? Thanks in advance.
G4 iBook Mac OS X (10.3.9)

Same problem here! It's exasperating because now iTunes 8 has stopped all flow of music to my speakers forcing an upgrade of firmware for AE to 6.3, but the firmware upgrade crashes... so... we're screwed.
Thought I'd chime in so we can maybe get some attention on this issue. Just release a raw upgrade and we'll do it ourselves?
Something?
This is so annoying. All of this music and iTunes has it all hijacked.
Troy

Battery Problems after Itunes 7.0 andd ipod update 1.2

Hi folks I too am having problems with the new updates for Itunes and Ipod updates... I have a 30 gig video Ipod...Did the update, and everything went fine as far as updating the ipod and itunes....Except now I only get barely 7 hours of audio playback on my ipod... Has anyone else noticed this problem... And if so is there a way to revert back to the previous Ipod update version for the time being..... I dont use videos on my ipod just audio podcasts... But I need the battery time to be back to what it was before the newest update... As I work 10 hours a day... Thanks for your help......

You can go back to your past settings. Just connect your Ipod to Itunes and click on your ipod. The first tab to the left gives you the option.

Nokia 5233 problem after a small V51.1.002 update

the new version of the browser makes my mobile running slow when i open the app.The application consumes more RAM.My mobile is not responding properly the way it use to.if can,make a new update.

Hi Ellyin,
Thank you for your first post and a warm welcome to the Nokia discussion forums.
So just to clarify since you updated your internet browser, whenever you open this application its runs a lot slower?
There are a couple of things you can try. Firstly try clearing the cache. To do this select Options > Other options > Clear the cache.
Also you can try a soft reset (Please remember to back up your phone) by typing *#7780# and then giving it a try. If not then you could try a hard reset by typing *#7370# (Please remember to back up your phone first!!!)
Furthermore you could also make sure your firmware for the phone is the latest. You can check this by connecting your phone to Ovi suite and checking the phone is on the latest update.
Hopefully one of the above solutions should get you browsing happily again!
Let me know if any of the above helps.
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Few apps problem after 10.3.1.1565 update.

#1 SMS app have problems with displaying. When going into that app system always go thru bb hub and so black background from options to lower battery consumption does not work.
#2 BBM
- Problem with vertical displaying. When keyboard is active to write a msg it overlaps written text window preventing user from seeing what he wrote. Also there is a problem with showing latest msg in a chat during writing msg in both modes (horizontal and vertical)
- When running BBM app thru a hub its possible to switch it into horizontal mode. When accessing it from 'desktop' it's impossible to switch BBM into horizontal position (was that way in previous version too).
#3 Clock - modes of the app were removed from bottom of the screen. Now to switch between alarm clock, timer and other its necessary to open side menu therefor i'm forced to make more work to get into designed mode at the time needed. Make it the way it was in previous version! Also timer clock looks awful...
#4 Assistant - What the hell is that? Why does it look like windows phone and how the hell turn it off?!
Last but probably not least why there was addes some stupid 'home screen' desktop? Its pointless and useless to have it! Its just old block screen without password block. Another thing to dispose of or atleast make an option to disable it!
- edit-
I did forgot about the amazon appstore. Why the hell i'm forced to have some android appstore on my phone and I can't remove that thing from the desktop?

For BBM, check BBWorld to make sure you have the latest version.
For SMS, the dark background is just in the individual conversations, not in the Hub itself
For Clock, that's just the way it is now.
For Assistant, you don't have to use it. It's a voice/text search assistant. Use it if you want, don't use it if you don't want. Up to you.
Home screen desktop: Go to main Settings >Display. At the very top disable "Show Wallpaper When All Apps Are Closed.
You have the Amazon app store so you can get apps, many of which are not available in BBWorld. Don't use it if you don't want to. Seems BlackBerry can't win--some complain for lack of apps, others complain because apps have been added.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

I/O problems after installing latest 10.5.2 update

Since the last 10.5.2 update, when I close the lid on my 15 inch MacBook Pro, it goes into sleep mode, even though I have an external keyboard, mouse and LCD monitored plugged in. Before the latest update, I used to be able to close the lid and work using external monitor, keyboard and mouse.
Help appreciated

I closed Acrobat, then closed other apps, then re-opened the PDF in Acrobat. Seems to be ok now.

Problems after 10.3.1.1779 update

Hi,
Recently updated the software on my BlackBerry Q5 to 10.3.1.1779. Software starts functioning automatically. Phone dials numbers, whatsapp starts sending files and the phone sort of starts operating itself without me touching the screen. Almost caused a major emabarrasment and cost me my job. I love this phone but post the recent software update this 'ghost operation' of the software has got me thinking. Please help.
Cheers!

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works then try holding the volume up/down keys until the device fully shuts down, then wait 5 minutes, then power up normally.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Otherwise, you may want to consider a clean OS reload and/or update to an even newer version. The suggested methods are LINK for those OS levels your carrier has approved, or AutoLoader for those OS levels your carrier may has yet to approve.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Calendar Problems After 10.2.1.537 OS Update

Hi, I have a Blackberry Z10 on Verizon Wireless. My calendar setup is using Google Calendar via Caldav settings. Also I have 6 calendars under my one gmail email. Prior to the update I was able to edit my different calendars. Now updating to 10.2.1.537 I can only update the main calendar under my email but the other ones will show up on my phone but it won't let me edit them only delete them. Has anyone else run into this?

susheera wrote:
Even if I turn off my network nd wifi issue persists.
Nd when I turn off it shows a small 'e' symbol beside my carrier signal
does "nd" mean "and"? You're making this difficult for me to understand.
Please answer this:
Turn off your WiFi.
What is the network signal indicator at top left of the home screen?
Do you see the BlackBerry logo next to the mobile network signal also, on the same line?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Iphone 4 problems after 7.0.2 update--Especially with keyboard entries

I am having serious iphone 4 problems after installing the 7.0.2 update. Mostly it is with use of the keyboard. Each key stroke takes about 8 seconds to show. It is truly disabling. Apparently many others have had various problems. The one thing the Apple Tech would tell me was that 7.0.2 cannot be uninstalled. I have restarted & reset. Settings shows I have more that 20 free GB of space, though I don't know if that's important.
Sure would appreciate help! Thank you!

settings - general - reset - reset network settings.
also turn off automatic app updated...

Problem after 10.6.6 update! MDS running from the start on activity monitor

Hello,
I have a iMac late 2009 and yesteday <unfortunately> I did the update 10.6.6! Before everything was working great cause I care the system with clean my iMac and other applications everyday and mostly I use recording programs like Pro Tools. After update the restart came and iMac's CPU was jumping at 20-30% without touching anything! I saw on Activity Monitor and <mds> was running! I want to ask what is that and how I can remove it and not running all the time. I close it from Activity Monitor every time the system starts but I want to remove it and don't see it as it wasn't before! After reading other topics, I did verify and repair permissions from Disk Utility and Mac Osx disc but mds starts when system boot.

This problem started happening to me on both my iMacs as well. I have a brand new 27" 3.06 Core2Duo which started to experience boot and shutdown problems after running the 10.6.6 update. My 21.5 3.06 Core2Duo (have had for just over a year) is suffering quite a bit more. My 21.5" iMac has Bootcamp installed, as mentioned in this thread and at the following thread: http://discussions.apple.com/thread.jspa?messageID=12968046#12968046
I had noticed extremely sluggish behavior and many cases of the spinning wheel of lost hope. I run MenuMeters, so noticed a higher than usual CPU utilization - looking into Activity Monitor, mds was taking between 30% and 50% of my CPU.... ordinarily that shouldn't be a problem, but since that is Spotlight's indexer, I imagine there was IO contention. I plan on removing Bootcamp this weekend (don't really use it anymore thanks to Parallels 6).
Additionally, I have experienced horrible WiFi performance on both iMacs since updating. I have seen a few mentions on the Internet about this, but no real official acknowledgement. My icon in the Menubar indicates that the connection is still solid, however, I'm unable to resolve websites, etc. I assume that it is losing its connection momentarily to my router, and not reresolving with DHCP upon reconnect. This problem seems to be pretty repeatable when I use Fast User Switching... Anyone else having this problem? I have ruled out my router, as my Windows box and Linux laptops have zero issues. I hope Apple is resolving this issue -- making me eat my words when I told my wife that we HAD to go Mac since its so much more reliable!
- Paul

ACE Problem after restarting Application

Hi,
we have an ACE20 and have set it up to balance 4 Containers on a Oracle Application Server. Every time we stop all Containers at the same time for longer than an hour it takes forever (hours) until the Load Balancer starts balancing the Containers again. I can see that the ACE Module is checking the Containers in the Apache Logfiles on the Application Server and gets a 200, but still we can't access the Application for a few hours. If I connect direct to the Container it also works fine... just the ACE does not work. Like it has a timeout and is waiting.
Any idea how to give it a kick?
While accessing the Application I can see that it connects, but nothing happens...
sh conn detail
total current connections : 2
conn-id    np dir proto vlan source                destination           state
----------+--+---+-----+----+---------------------+---------------------+------+
68155      2 in TCP   191 10.200.101.73:35777   10.200.101.64:80      ESTAB
          [ idle time   : 00:00:18,   byte count : 888        ]
          [ elapsed time: 00:00:18,   packet count: 3          ]
68156      2 out TCP   195 10.200.105.33:80      10.200.101.73:35777   INIT
          [ conn in reuse pool : FALSE]
          [ idle time   : 00:00:18,   byte count : 0          ]
          [ elapsed time: 00:00:18,   packet count: 0          ]
Thanks for any help!
Jason

Hi,
I'm still having problems with the ACE Laodbalancer. At the moment it doesn't seem to recover after having restarted the Application the last time.
Can someone look at the Config and tell me if they see a mistake in it?
I have three instances accesst, accesst2 and accesst3. Each instance has 4 Oracle Application Server Containers Deployed on 2 different Apllication Servers. The Site is split between 2 DMZ which are seperated by a Firewall. The Cisco Ace has one leg in each vlan (191 and 195). We always had a problem after taking the Applcation Servers down Updates that it takes forever untill the ACE Server starts blancing agian. For the last 4 Days it hasn't started reblancing yet. As far as I know nothing has changed in the Configuration of the Server or of the ACE. The Firewall Admin said he tried t find a problem, but didn't change anything.
Do I maybe have a mistake in the ACE Config? Am I missing something here?
MS4_ACE_PU/MY-APP# sh running-config
Generating configuration....
logging buffered 7
access-list anyone line 8 extended permit ip any any
probe http HEAD_1
port 7791
interval 10
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_2
port 7792
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_3
port 7793
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_4
port 7794
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_5
port 7795
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_6
port 7796
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_7
port 7797
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_8
port 7798
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
parameter-map type http PERSIST-REBALANCE
persistence-rebalance
action-list type modify http LOCATION-RW-VIP-2
header rewrite response location header-value "http://accesst3.my-site.de:.....(.*)" replace "https://accesst3.my-site.de/%1"
header rewrite response content-lokation header-value "http://accesst3.my-site.de:.....(.*)" replace "https://accesst3.my-site.de/%1"
action-list type modify http LOCATION-RW-VIP-1
header rewrite response content-lokation header-value "http://accesst2.my-site.de:.....(.*)" replace "https://accesst2.my-site.de/%1"
header rewrite response location header-value "http://accesst2.my-site.de:.....(.*)" replace "https://accesst2.my-site.de/%1"
action-list type modify http LOCATION-RW-VIP
header rewrite response location header-value "http://accesst.my-site.de:.....(.*)" replace "https://accesst.my-site.de/%1"
header rewrite response content-lokation header-value "http://accesst.my-site.de:.....(.*)" replace "https://accesst.my-site.de/%1"
rserver host server103
description KS ApplicationServer
ip address 10.200.105.33
inservice
rserver host server104
description KS ApplicationServer
ip address 10.200.105.34
inservice
serverfarm host HTTP-APPL
rserver server103 7791
      probe HEAD_1
    inservice
rserver server103 7792
    probe HEAD_2
    inservice
rserver server104 7791
    probe HEAD_1
    inservice
rserver server104 7792
    probe HEAD_2
    inservice
serverfarm host HTTP-APPL-1
rserver server103 7795
    probe HEAD_5
    inservice
rserver server103 7796
    probe HEAD_6
    inservice
rserver server104 7795
    probe HEAD_5
    inservice
rserver server104 7796
    probe HEAD_6
    inservice
serverfarm host HTTP-APPL-2
rserver server103 7797
    probe HEAD_7
    inservice
rserver server103 7798
    probe HEAD_8
    inservice
rserver server104 7797
    probe HEAD_7
    inservice
rserver server104 7798
    probe HEAD_8
    inservice
sticky http-header TranSON_Cert_Subject group1
replicate sticky
serverfarm HTTP-APPL
sticky http-header TranSON_Cert_Subject group2
replicate sticky
serverfarm HTTP-APPL-1
sticky http-header TranSON_Cert_Subject group3
replicate sticky
serverfarm HTTP-APPL-2
class-map type http inspect match-any HTTP-INS-VIP
2 match header Host header-value "accesst.my-site.de"
class-map type http inspect match-any HTTP-INS-VIP-1
2 match header Host header-value "accesst2.my-site.de"
class-map type http inspect match-any HTTP-INS-VIP-2
2 match header Host header-value "accesst3.my-site.de"
class-map match-all HTTP-VIP
2 match virtual-address 10.200.101.64 tcp eq www
class-map match-all HTTP-VIP-1
2 match virtual-address 10.200.101.68 tcp eq www
class-map match-all HTTP-VIP-2
2 match virtual-address 10.200.101.69 tcp eq www
policy-map type loadbalance first-match HTTP-SF
class class-default
    sticky-serverfarm group1
    action LOCATION-RW-VIP
policy-map type loadbalance first-match HTTP-SF-1
class class-default
    sticky-serverfarm group2
    action LOCATION-RW-VIP-1
policy-map type loadbalance first-match HTTP-SF-2
class class-default
    sticky-serverfarm group3
    action LOCATION-RW-VIP-2
policy-map type inspect http all-match INS-PM-VIP
class HTTP-INS-VIP
    permit
policy-map type inspect http all-match INS-PM-VIP-1
class HTTP-INS-VIP-1
    permit
policy-map type inspect http all-match INS-PM-VIP-2
class HTTP-INS-VIP-2
    permit
policy-map multi-match SLB-logic
class HTTP-VIP
    loadbalance vip inservice
    loadbalance policy HTTP-SF
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
class HTTP-VIP-1
    loadbalance vip inservice
    loadbalance policy HTTP-SF-1
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
class HTTP-VIP-2
    loadbalance vip inservice
    loadbalance policy HTTP-SF-2
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
interface vlan 191
ip address 10.200.101.65 255.255.255.0
alias 10.200.101.67 255.255.255.0
peer ip address 10.200.101.66 255.255.255.0
access-group input anyone
service-policy input SLB-logic
no shutdown
interface vlan 195
ip address 10.200.105.65 255.255.255.0
alias 10.200.105.63 255.255.255.0
peer ip address 10.200.105.66 255.255.255.0
access-group input anyone
no shutdown
Destination         Gateway          Interface         Flags
10.200.101.0/24     0.0.0.0          vlan191           IA [0x30]
10.200.105.0/24     0.0.0.0          vlan195           IA [0x30]

GPRS problems after 4.0726.2.0.1 update on N73

Similar Messages

Maybe you are looking for