GPRS settings steps for N7210S

I wantd to know how to do GPRS settings In N7210S(eps)

Hi,
check from here:
http://europe.nokia.com/A4144889
2110i | 3110 | 6110 | 6210i | 9210i | N95

Similar Messages

When I try to install the 'GOOD for enterprise" app, I am getting error 0x100001 during retireve settings step. I followed the step of reloading the OS to fix this as suggested in another thread but even after that I have the same problem. Please help.

when I try to install the 'GOOD for enterprise" app, I am getting error 0x100001 during retireve settings step. I followed the step of reloading the OS to fix this as suggested in another thread but even after that I have the same problem. Please help.
Regards,
Nagarajan Kadhiresan

if you using the same port, maybe this issue caused by your kingmax
to make it fast, try your king max at other PC, if cant detect, please reformat your king max

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Step by step for 2.6

So I think im finally ready to make the plundge to the 2.6 kernel.
So I need some help. Ive only compiled a kernel a few times, and I never changed many settings.
So could someone give a step by step for it (being sure to list any arch-specific quirks)? I would greatly appreciate it.
Also, I hear theres a patch that lets you run the Official Nvidia drivers with the 2.6 kerne, has anyone gone through this? I really have no idea how to go about doing this,as i've only ever installed the .run file.
Any help would be appreciated.
Also, its possible to switch between the 2.4 and 2.6 kernel, right? (obviously with a reboot).
Lastly, Is a new release of the 2.6 due out anytime soon? I dont want to download and compile this just to find a new version comes out.

You have to use module-init-tools which supercedes modutils. I made a PKGBUILD for it for my local system simply so I could uninstall it easier if I wanted. However, you still need the old modutils as well.
Here is my hack to get module-init-tools working:
1. Use the PKGBUILD below to compile and install module-init-tools.
2. For each of modprobe, lsmod, rmmod, depmod, and modinfo from modutils, rename those to modprobe.old, lsmod.old, etc. To find where these binaries are, use "pacman -Ql modutils".
3. Create symbolic links from the binaries that modutils used to provide to the new binaries that module-init-tools provides. Again, use "pacman -Ql module-init-tools" to figure out where the new ones are.
Example - modutils provides /sbin/lsmod. Rename that to /sbin/lsmod.old. module-init-tools provides /usr/bin/lsmod. Create a symbolic link as follows:
[root@limbo root]# ln -s /usr/bin/lsmod /sbin/lsmod
If you aren't 100% sure what i am trying to say here, don't try any of it, or you will bork your system. Also, this is more of a hack, and that's why I didn't upload the package to incoming. I only made the PKGBUILD to keep track of where everything was going.
Anyway... hope this helps you on your way to:
[john@limbo john]$ uname -r
2.6.0-test5
[john@limbo john]$
PKGBUILD
pkgname=module-init-tools
pkgver=0.9.13
pkgdesc=""
url="http://www.kernel.org/pub/linux/kernel/people/rusty/modules/"
depends=()
conflicts=()
backup=()
install=
source=(http://www.kernel.org/pub/linux/kernel/people/rusty/modules/$pkgname-$pkgver.tar.gz)
build() {
cd $startdir/src/$pkgname-$pkgver
./configure
make || return 1
make prefix=$startdir/pkg/usr install

Steps for Email integration in sap crm system?

Hi Experts,
Please guide me the steps for email integration so that the emails are in syn with the WEB UI Interaction centre.Settings at the backend GUI are already defined.Actually in my case the Development system is not integrated with Email sync in WEB UI.I need to test the email functionality in Development system as steps I have followed are as below:
1)TCode :- SBWP,then I have created a mail & send it to email address which is defined in the SO28
2)TCode :- SOST,there I have clicked on my test mail,select it & click on execute button,green light appears & shows the message that the email is successfully forwarded.
Now when I open Web Ui,select my business role & then I go to inbox in the Navigation Bar,select email & click on search.Then it does not appear anything & shows search result zero.
Kindly suggest me the steps so that I can see my test email in Dev system Web Ui business role .
Thanks
Warm Regards
Vineet Joshi

Hi Prashant,
Thanks for your response. I want steps to configure communication channels like e-mail & fax to facilitate receipt of invoice from vendors, sending of PO to vendors, cheques, payment advices to name a few. Please let me know the detailed configuration steps for the same and also do we need to instal any tool to facilitate this process.
Thanks
Best regards,
Bhaskar
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM

Message settings option for text messages is not c...

I am using N73 phone and here i cant go to the message settings option for text messages. actually i want to change my message center.
Message > Options > Settings > Text Message
When i tried to follow above steps it finally ends up with the Main menu. But previously it works fine. I want to know there whether there is another way to set it or i need to go for a phone software installation.
Thanks.

The settings can also the sent directly to your phone as an auto install sms from your network. Contact your network and request they send you the sms.

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Automatic Colour settings problem for WAD Chart Column type

Hi,
In WAD (BI 7.0) Chart Creation i am having issues with colour settings for Chart item Column type with 3D. I have six key fig in query i am trying to show all KF in Chart. But it is showing only one colour for all keyfigs. atlast I have manually assigned different colours for different series, but no use... the issue remains same.. Please help me on this issue
Thanks in Advance
Regards
Harsh

Hi Harsh,
Please try the following options.
1. Try swapping the axes. Certain charts follow the YX convention.
2. Right Click > Edit > Click on 'Refine' > Click on the chart type on the right frame (Bars/Pie etc) > [OK] Vary Category by Color: Enable this checkbox.
3. If you have finished with these settings, you may switch back to Wizard mode to follow up the settings (Step 3 of 6 - Value Properties)
4. Under Categories in Wizard, just make sure you are giving options to suit all the Categories in an uniform fashion. To begin with don't bother to give a fixed Category Count. (As your chart size may increase dynamically based on GRID data)
5. Goto Refine > Click on Global Settings > Choose 'Color Palette' > Tradeshow/Enjoy/StreamLine/Custom : These are the optional themes which may be well adjusted to suit your requirements.
Thanks,
Arun Bala

POST Installation steps for SAP XI 7.0 SP06

Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly help

Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful)

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

ECM 11.1.1.5.0 - need steps for SSO integration and configuration

Hi,
I want to upgrade recent UCM 10g to ECM (or Webcenter Content) 11g. I passed via upgrade process and it looks it is working fine. Need some validation, but basically upgrade went fine.
But I lost SSO (Windows Login) functionality, asi this ECM 11g is weblogic based and uses a bit different authentication than old version.
My current test instance setup is:
Oracle database 11gR2
Weblogic 10.3.6.0
Oracle Enterprise Content Management Suite (ECM) 11.1.1.5.0
All running on the same linux machine
Currently I am only able to:
- define static users / groups in the weblogic's default authenticator
- define ldap authenticator in weblogic which can authenticate users defined in ldap
And I need to make it SSO capable (meant once user is authenticated in our windows domain, then when using Internet Explorer there is no need to enter user/password anymore)
I read some documentation and there they claim Oracle Identity Management / Access Manager is the right solution. But I do not know how to properly install and configuration of this.
Is there anybody here in this world who would provide some simple steps what needs to be done for enabling SSO for ECM 11.1.1.5.0 ?
When I read oracle documentation I am finding it to be written too much in general with too many referencing to too many other documents... I am searching for some kind of simplified installation guide for getting this SSO thing working.
Anybody here who could support me?

Hi
Steps for integration SSO (be it OAM or Oracle SSO or AD / LDAP etc ) the steps remain same except for one .
1. On WLS create the identity store provider .
This can be OID Authenticator , AD Authenticator , LDAP Authenticator depending on what you are using to store the users and their roles /groups etc .
2. Create SSO Identity Asserter .
This should be either AD Asserter (in case of using AD) , OAM Identity Asserter (if using OAM) , SSO Asserter (if using OID based SSO solution) .
3. Order the providers created in the following order and the respective flag settings :
Identity Asserter - REQUIRED
Identity Store Provider - SUFFICIENT
Default Authenticator - SUFFICIENT
After this is created stop UCM and WLS .
Start WLS admin , once it is up and running start UCM server .
Go to WLS - Security Realm - myrealm - Users and groups and verify the right set of users are seen with their correct groups .
Now launch UCM server and depending on which SSO solution is used the login page will vary where in the SSO user id / pwd can be entered .
Hope this helps .
Thanks
Srinath

Customization step for in New Plant in production planning.

Dear Experts,
Thanks for your continues support from SCN.
My company having one of the production process unit.
Already some plants (1000 ) are assign the process order customization. But currently include one additional plant ( 1001) for process manufacturing.
Basically create order type, production scheduler, production scheduling profile these are all the main thing, other wise what are all the assignment to be ensure , create and followed.Kindly send me the customization step for each assignment in our new plant.
( order creation to end of the account settlement itself)
I am waiting for your valuable feedback.

Hi Anil,
if all master data configuration is over in the new plant, you can proceed to crteate the required cofiguration for new plant.
if your production process is similar across all plants then you can simply copy all the required things from your old plants, or if the process is different in the new plant you have to configure the required settings.
as you asked what are required settings apart from Basically create order type, production scheduler, production scheduling profile these are all the main thing,
apart from above things. actually the configuration is depends on your Production process which you Follow in your business. as standard process starts from Configuration od SOP And Transfering Demand To MRP and Running MRP then executing the results of mrp in this case we need to configure SOP And MRP Settings First then remaining Production process configuration.
can you give the details of your PRoduction process then we can discuss the sequence of required configuration.
Thanks&Regards,
Venkat.

Steps for Getting Repository Reports to Work in SCM 9024

Have installed Des9i/SCM 9024. With this install, repository reports are not installed without the base release of O9iDS R2. What are the exact steps for getting the Designer Repository Reports to work via the RON in SCM 9024? Basically, I would like to have the Repository Reports option 'enabled' in the RON.
Does 9iDS 902 have to be installed in an Oracle Home first, and then install SCM into the same OH? I would rather not have to install the entire iDS just to be able to have object reporting in SCM.
-- Al

Hello Joe Matheis. Welcome to the Apple Discussions!
Let's double-check your AirPort's configuration for streaming iTunes ...
Either connect to the AX's wireless network or temporarily connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX

GRC AC V10 - one approval step for manager and role owner

Hello Community,
I have one, perhaps easy, question. Where is it possible to maintain the solution of one approval step for manager and roleowner, if both are unique.
E.g.:
simple approval workflow: manager stage afterwards roleowner stage afterwards auto-provisioning
So if the request is routed to the manager and the manager is also the roleowner of the requested authorization role (same UserID). The user has to approve one and the same request twice.
Is it possible in V.10 to change the config that the user has only to approve the request once? And then to decide on which relevant stage settings are valid for this process.
Thanks,
Alexa

Hi Alexa,
We have had a similar questions raised in a project. In an ideal world, a single "Sign-off approval" would be a great functionality where the same user has to approve the same consecutive stages, but the reason for different stages would entail that the responsibilities entailed per stage differ, e.g. Line Manager would just check the over request, and the role owner etc may be reviewing the elegibility of a specifc role etc.
If it is likely to be the same person reviewing the 2 consecutive stages, maybe a single stage workflow would be sufficient to cover this scenario.
I think the logic you are trying to configure in the workflow is possible but will require alot of work with knowing how to create a clever custom workflow with BRF+ or the actual WF stuff in SAP itself.

Settings required for including changes in data in a transport request.

Hi All,
I need the settings required for saving ths data changed in a database table into a customizing request.
Kindly let me know the steps involved in the process.
To elaborate:
I have a maintenance screen for a DB table.
Whenever a user creates/changes data to/from the DB table , using the maintenance screem, the data should be saved into a customizing TR.
Regards-
Harmeet Singh,

Hi there,
Any config change will be saved under a transport request TR. Also tables are of 2 types: Customizing table & application table.
Changes / new entry in a customized table are transportable. You will gte a TR when the customized table values are changed / new entry.
But application table entry / changes are non transportable. You willnot get a TR when saving the data.
To know it, go to SE11 --> give the table name --> display --> attributes --> Delivery class. Delivery class A is application table, C is customizing table.
Also some standard tables like MARA, VBAK are not allowed to maintain. If a table is allowed to be maintained, table maintaience allowed is checked in the above.
Regards,
Sivanand

GPRS settings steps for N7210S

Similar Messages

Maybe you are looking for