GPS data does not show up in mobileme gallery or exif info of exported pics

Hello,
I used places to geotag some of my pictures.
That went nicely, and I now have Latitude and Longitude Metadata entries
in the exif part of the metadata displayed by Aperture.
However, when I export these pictures to JPG, this information is gone;
the metadata of the exported pic does not contain latitude/longitude information.
Likewise, when publishing these pics to mobileme, no gps information is found in the
"information" part.
How do I write the gps data to the picture such that exports contain it and mobileme will display it?
(Aperture 3.03)

Similar to bjrnfrdnnd2, I have the 'Include location info in exported photos' button selected all the time in the Export Preferences. Unlike him however, the GPS information developed using Places (lat & long) does not get exported when I export photos. It is not present when I reimport the photo back into Aperture, nor does it show up in Preview when I examine the file using Inspector in the Tools menu (I export the Master File).
Interestingly, if I export a photo from iPhoto with the include location info box checked, the GPS info does import into Aperture without problem AND, most strangely, will also export with the GPS information regardless of whether the 'Include location info in exported photos' is selected in the preferences or not. The same thing happens if I import a geotagged photo from my iPhone into Aperture; that is, the GPS information gets exported regardless of what the Preference setting is.
Exactly the same thing happens on my MacBook.
I've checked my disk for problems using DiskUtility, repaired the Aperture Library, tried using a new library and also deleted the Aperture preferences file and created a new one. All to not avail.
All I can conclude is that depending on how the GPS data are input into Aperture (as part of a photo that is imported or as determined within Aperture using Places) the information is stored differently and so is attached (or not) differently to exported photos.
Has anyone else experienced this issue or does anyone know what might be wrong here?
Thanks

Similar Messages

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • My ICal data does not show up on Subscribers Calendar

    Following all of the instructions how to get my ICal information to another Apple Computer (Macbook Pro) however when we access the Macbook Pro the data from my Calendar does not show up. Calendar is there, just the data does not make it across.
    Any thoughts.
    Thanks Mark

    Thanks for the information.
    If you view the same calendar on the MobileMe website, do you see the events?
    http://ical.me.com/yourmembernamehere/calendarname
    If you don't see the events on the calendar web page then the publish did not go through succesffully.  Un-publish the calendar, make a slight change to its title, and then re-publish and test.
    If you do see the events on the website but still not in iCal on the 10.6.8 system:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Remove the subscription for iCal to that specific calendar.
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    4. Launch iCal and re-add the subscription.
    Hope that helps!

  • Oracle apps Data does not show in Discoverer

    When running my query in sql developer, I have to execute the command apps.fnd_global.apps_initialize(user_id, resp_id, resp_appl_id) in order to show the result of my query. Without this, the query returns nothing. The problem is I am using this query as a custom query for my Discoverer report and my report does not show any record. Anyone knows how to handle this?

    Hi,
    There can be many reasons why a Discoverer report does not return data, but I don't think it will be because the session is not apps initialized. Check that the language has been set correctly, using the calculation userenv('lang').
    As I don't know anything about your environment, it is a bit hard to guess what else might be causing this issue. Is there anything different about this report? What is the custom query that you are running?
    Rod West

  • Meta data does not show up in Illustrator

    Metadata added in Bridge does not show up in the file info in illustrator right away. You need to import XMP to have the metadata in the illustrator file.
    I have about 10.000 files, is there and easy way of getting the Metadata (keywords mostly) into the files?

    Probably should post in the Illustrator Froum.

  • AppleTV not showing Movies in MobileMe Gallery

    I created a movie in the latest iMovie and used its "share" to send the movie to MobileMe.  I see the Movie in my Gallery (online/web) and I can see/play it in the Gallery app on my iPad.  But the Movie does not show up on my ATV (2nd gen.).
    I saw earlier discussions on this question that suggested that logging in without the @me.com (or mac.com) suffix on the ATV device was the fix.  Well, I'm logged in without any suffix -- always have been, but logged out and back in just to confirm. 
    Also, when I play the movie on my iPad in the Gallery app I am offered the option to use AirPlay to stream to the ATV, for viewing on my TV.  This option works with other videos (e.g., ones from the Elgato app), but when I click on the AirPlay choice while the Gallery app is playing the movie, it does not appear on my TV/ATV.
    Any ideas?  The generation of the movie out of iMovie did not give any errors.

    Update...I can now see the videos if they are published through iMovie instead of through iPhoto...Don't really understand why that works, but at least it's something...

  • Plan Data Does Not Show in FI Report

    I am using 6.0 with New GL and Functional Area standard Report S_PL0_86000029.  I added cost center plan data using KP06 and that info shows fine in std report for cost centers (S_ALR_87013611), but does not appear in the aforementioned FI based report.  Is there some transfer transaction I am missing? 
    Thanks
    David

    I resolved my problem by creating a new GRR1 report using the New GL (FAGLFLEXT) table.  This report brings in all of the primary cost element postings as well as the secondary overhead postings.  This provides a much more holistic view of FICO reporting.  I used Functional Areas in order to break out the income statement into typical sections, including one for Net Order Consumption.  This special section for orders should be zero if everything is settled to either WIP or variances.  Otherwise I see a order related settlement problem on the face of the income statement.  I found there was a slight problem with the secondary postings between the cost center and order.  I used substitution rules to force the order postings to have one functional area while the cost centers provided the other side.
    Once I haad the actual postings working, the next problem was that no plan data was coming to the report.  I had to work through many details to finally get the plan data to come through, but now it works as designed.
    Juggler

  • I can fax but the date does not show up on the fax, display nor confirmation. need info to fix

    HP7500A printer, just purchased. Works fine except for date. Since I must have evidence of time sent on fax, this does not do the job.
    This question was solved.
    View Solution.

    Hi Mbailey212,
    Do you have the date/time set on the machine itself? to do so:
    Go to the front display of the printer, and ensure the printer's display is on the home screen, if its not, the home light on the upper left will be lit. If so, touch it and it will take you to home, then arrow right once and select settings, scroll down to preferences and select it. At the top you should see date and time, select this and enter in the correct date and time.
    Let me know if this helps or not.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • When I take a picture with my iphone, the date does not show when I down load the picture. Is there a way to program this?

    when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.

    Dropbox "Camera upload" option just rename the files and looks like this.

  • Data does not show up in 0PUR_C01

    I deleted the set up table for '02' in LBWG , I executed for Industry and transaction key in SBIW under Purchasing . I extracted in RSA3 for 2LIS_02_ITM and it brings 1003 records.
    I loaded this in BW into 0PUR_C01 . The load was successfull . But 0 records were added to the cube and therefore I do not see the data when I click on Manager. I know it has something to do with Process key activation . I think I ran all the steps but don't know what I missed here .
    Can someone guide ?
    Thanks
    Message was edited by: BI TCS

    I executed OLI3BW as well , the same issue persists. I am not sure what is that note about , it says performance issue ?
    Also my issue is slightly different because I see records in the set up tables for ITM and SCL .
    Thanks
    Message was edited by: BI TCS

  • Data does not show for forms created in 6.0 Pro, in 8.0 Pro and 10.0 Pro

    Greetings...
    Our company have several forms created using Acrobat 6.0 Pro.  We upgraded to 10.0 Pro, and noticed that the forms do open, with NO data (that was entered using 6.0 Pro).  We downgraded to 8.0 Pro, with the same result.  These fillable forms show up in 8.0 and 10.0 as blank forms (as though there was no data entered in the fillable fields!).  If you encountered this, and found a work-around, please post...   Thanks.

    We used Acrobat 6.0 Prof, to fill in the forms (fillable fields). We received the forms from Los Angeles County.  

  • Report does not show data , but data exists in the cube.

    Hi All,
    I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
    It shows the data if I load directly from the extractor, but not when I load data thru DSO.
    Any ideas.
    Alex(Arthur Samson)

    Hi Alex,
    I am facing same problem, i have data in cube but in report i cant see....
    i have created a generic DS, i loaded the data to DSO  then CUBE.
    data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
    i think you solve this issue... plz help me to resolve this issue.
    Regards,
    SHAIK.

  • Date field submited via my custom form does not show in mysql database

    I created a form with the custom form wizard with a birthdate field having the date picker feature. i set the birthdate field to sumit date as date datatype. My birthdate column in mysql database is datatype date. but when i submit the form the date does not show in mysql database. what should i do pls. is the problem with my form or with my database birtdate column.
    Thanks

    zeeztaz wrote:
    iis the problem with my form or with my database birtdate column.
    Thanks
    please post the complete code of the page which contains that form, otherwise it will be impossible to detect the possible reason for this error.
    Cheers,
    Günter

  • Uploaded a pic, but i does not show in browser..

    hi all.
    i uploaded a pic "diso.gif" using the pic repository utility and assigned it to my app 107.
    then i replaced the original picture oracle picture from my template with the diso.gif pic:
    <img src="#IMAGE_PREFIX#diso.gif" border="0" alt="oracle" />
    but it does not show. is something wrong there? in the browser the pic has the path "http://192.168.255.20:7777/i/diso.gif"...
    please help! thanks.

    Joshua,
    Have you seen any of our How To documents?
    http://otn.oracle.com/products/database/htmldb/howtos/
    This one describes how to upload an image and then use it in your page template:
    http://otn.oracle.com/products/database/htmldb/howtos/howto_change_logo.html
    Sergio

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

Maybe you are looking for