GPS data from my D-SLR does not appear in Lightroom 4 GPS data field

The gps data from my D-SLR camera does not appear in Lightroom 4 after importing the pictures

Gibson,
Well to be specific the camera model number and follow the manual to enable the same.
The GPS data is to be embded by the Camera istellf at the time when the pic was taken.
Please contact the OEM or tech support if you are not able to get the same.
Mandhir

Similar Messages

  • Option to email a pdf from an access report does not appear.

    I upgraded to windows 8, and now the option to email a pdf from an access report does not appear.

    Hi anne,
    Could you please let me know what Acrobat and OS version are you using.
    Does this happen in case of any particular PDF or all PDF files?
    Try repairing Acrobat and then again check.
    Hope to get your response.
    Regards,
    Anubha

  • After editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4

    after editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4 can anyone help?

    In Library, set your sort order to Filename instead of Added order and see if the files show up, then. 
    How are you doing the Save in PS, using Save or Save As—one will show up, one won’t, I think, but I don’t remember which.

  • Depreciation area set in Asset Class does not appear in asset master data

    Depreciation area does not appear in the asset master data however it is set in the Asset class. If other asset is created in the same Asset class that depreciation area is automatically set  in the asset master (it proofs that it is not a problem with Asset class).
    I tried to set that deprecition area directly in the asset master data but all the fields are blocked for changing (is it possible to change that?).
    What should I do as I need to post on that area ?
    Thank you,
    Jean

    Ok Zaid!  thanks,
    But what treatment should I give to that asset? Because now it is not being evaluated in that area but we need to do it.
    The asset was created in the prior exercise (year).
    Regards,
    Jean

  • Title does not appear in Lightroom web gallery

    Hello, I have the "filename" set as the title in the web gallery (under the "Image Info" panel), but it doesn't appear in the preview window. It also doesn't appear when "filename" is set as the caption. Both the caption and title fields are blank. In fact, when I change the text to any of the other options (sequence, date, etc), still nothing appears, the field is blank.

    Geoff:
    I just did a test and the filename does not appear:
    http://www.rokeachphoto.com/test2/
    There should be a filename under the large image, but nothing...
    I'm probably doing something wrong.
    Barrie
    Barrie Rokeach
    499 Vermont Ave.
    Berkeley, CA 94707
    510-918-0809
    [email protected]
    Read the S.F. Chronicle's recent profile of me:
    http://www.sfgate.com/cgi-bin/article.cgi?f=/c/a/2011/04/04/DD2G1IOGK2.DTL
    aerials: www.rokeachphoto.com
    corporate: www.rokeachphoto.com/corporate
    special events: www.rokeachphoto.com/specialevents
    art: www.rokeachphoto.com/Art

  • Substitutions - field does not appear in list of 'substitutable fields'

    Specifically, I would like to use a exit substitution to replace the content of the Structure PRPS-POSID field.
    However, I cannot seem to use a simple substitution rule (since PRPS-POSID does not appear as a substitutable field in the PRPS list of fields that pops up when creating a 'Step').  Most of the PRPS field are availed as 'substitutable fields' but not POSID.
    The user exit approach is proving difficult since I cannot add the following code unless I put in a data or tables statement (which is NOT recommended).
    If proj-PSPID(7)  <> prps-POSID(7) .
      prps-posiD(7) = PROJ-PSPID(7) .
    ENDIF.
    Please help!

    Hello Shrikant;
    The requirement is to ensure that the WBS element numbering (prps-posid(7) ) will always match that of the Project Definition (proj-pspid(7) ).  This numbering rule is required to comply with the Fund Centre numbering since the fund center number utilizes the Project Definition number as an identifier ( I will email you some screen prints).
    If there is a discrepency between the WBS element numbering (prps-posid(7) ) and the Project Definition (proj-pspid(7) ) number, the requirement is to assign Project Definition (proj-pspid(7) to the WBS element numbering (prps-posid(7) .  The transaction used to call the substitution exit is CJ20N.
    A big thanks for your comments so far.
    Peter Forster.

  • GPS does not appear to work with data-roaming off and no wi-fi network

    I have been using an application called imarkmyspot to produce way-points for synchronising with my camera. When I am in my home country this works fine and a GPS location is found quickly.
    I've recently been abroad and had data-roaming turned off to avoid high expense. The point is that in this situation the GPS does not work (with imarkmyspot or Goggle Maps) unless I can access an open wi-fi network.
    So my question is, is this correct? Does GPS only work with either data access on or when within range of an open wi-fi network.
    If this is feature (bug) of the iPhone then this makes applications such as imarkmyspot rather useless when travelling. Alternatively it could be imarkmyspot that has this problem of course. But I'm quite sure Google Maps did not work either in this situation either.

    The iPhone's GPS does work without a data connection.
    Two weeks ago on a work-related trip I knew I'd be traveling a rural highway that would leave me without data/voice from any source for at least 45 minutes (no GSM service). Before leaving a city with data, I zoomed out using Google Maps far enough to show most of my route, then "nudged" the map so the application wouldn't try to get a data update for the map. I simply used the top power button to turn on and off the screen. The iPhone and GMaps tracked me through for the entire blacked-out section of my trip - I made sure the device had a decent view of the sky and it got a fix and nailed the location within a few seconds.
    Ironically, I'm returning that device in the next few hours for an exchange. The GPS hardware, it seems, has failed about a week ago - the device gets A-GPS fixes now (it shows the nearby 3G and EDGE towers), but won't lock in for more than a second or two. My iPhone's GPS worked, and now it doesn't - AppleCare told me my GPS hardware has failed - and you're may be exhibiting the same failure.
    Some A-GPS devices use their sources to get close by - like my TomTom GO and the ephemeris files it grabs from their servers to get updates on where satellite locations are - and then use the on-board chip to nail the device's position. From what I understand of the iPhone's assistance mechanism, the data tower's and Wi-Fi physical location needs to be correct and available in an accessible database somewhere - my iPhone was showing me near Houston TX (2200 mi/3500 km distant from my actual location) when using 3G data until the data source was updated.

  • Email sent from my macbook pro does not appear on my ipheon

    I have AOL mail.
    All inbox mails appear on both my MacBook Pro and my iPhone (and if I log in to AOL mail).
    But mails SENT from my MacBook do not appear on the iPhone (they used to).  And mails sent from my iPhone do not appear on my MacBook.
    Mails sent from my MacBook used to appear as "sent messages" on the iPhone.
    Does anyone know please if this is an AOL problem or an Apple "settings" problem?  I have not, to my knowledge, changed anything myself.
    Many thanks
    Bill

    10.6.3 is pretty old for this machine but shouldn't create this problem.
    So you did this:
    Reset SMC
    http://support.apple.com/en-us/HT201295
    If no joy then:
    Try a hard reset. Disconnect the battery (take the bottom off and unplug, use your fingernail.) and power adapter. Press the power button for 1 minute. Let the computer sit for 5 minutes, Reconnect and try to start up.
    No? - Go through the same procedure and try to start without the battery connected.
              The addendum to this would be to try a known good battery.

  • RX100 does not appear in Lightroom or ACR

    I have all three of Sony's RX100 cameras.  Cannot get them to appear in Lightroom or ACR.
    I do not have any problem with any of my Canon DSLR bodies. 

    The RX100 cameras are supported as follows
    Camera
    File Extension
    ACR min
    version required
    Lightroom min
    version required
    DSC-RX100
    ARW
    7.2
    4.2
    DSC-RX100 II
    ARW
    8.2
    5.2
    DSC-RX1R (RX1R)
    ARW
    8.1
    5.0
    DSC-RX100 III
    ARW
    8.5
    5.5
    Which versions of ACR and Lightroom are you running?

  • Migration of  Business Partner data,  from a legacy system, does not work

    Hi All,
    We use a non-SAP application where  our customers sign a loyalty  program. The database created is replicated to CRM 7.0. However, when we create the Target Group in the Web Client UI,  the number of Business Partner in CRM is different from the number of BP registered in  the legacy system.
    Any comment can be helpfull.!
    Regards
    Marí

    Maria,
    Please explain the way the data has been replicated,,, ( Errors in few records - answer to the mystery)
    Is there any segmentation basis used while creating the target group? ( Segmentation Basis - answer to the mystery)
    What are the data sources used for segmentation? ( Different query settings -  answer to the mystery)
    Regards,
    Piyush

  • Data from Page 1 of survey not appearing

    Hi There
    I am in desperate need of some help here!
    I have created a very simple two-page interactive form in LiveCycle Designer. It works absolutely fine when I test it myself, but when I send it to a co-worker half the data (page one) is missing. I've tried everything I can think of (such as sending it in a XML data Package and trying the two options for the 'submit' button) and have not been successful.
    I think it may be because my co-worker is working from an older version of Outlook than I am?
    Please, please help!
    Thanks in advance

    I don't believe outlook is the issue ...can you send it to [email protected] and I will have a look. Also please describe the problem in your email.

  • Export data File Browse dialog box does not appear

    I am trying to export data to CSV and when I click on Browse to locate proper directory, nothing happens (the dialog doesn't show up).
    I normally right-click on any cell in "Result" TAB, choose Export->CSV.
    On the same note CSV format is a workaround to get to Excel. Is there an extension or option to save directly in Excel format. This would avoid having the client to open the file in Excel and then do a Save As with the proper XLS format instead of CSV.
    Using Win XP client connecting to 10.2 database. Using latest SQL Developer version (downloaded on Friday may 5th version 1.0.0.15.27).
    Thanks
    Robert
    Message was edited by:
    user509017

    I haven't seen the browse button problem that you describe. Is it still occurring? On all exports? There have been issues with export rerunning the query a few times which makes the application appear to lock up. Could that be the issue?
    There is an excel add-in. I assume that it isn't included for licensing issues, but it comes from one of the core developers of this app.
    esdev.sf.net.
    Regards,
    Eric

  • Does not appear possible to use date formatting in interactive reports

    I've an interactive report displaying a column of data type = date. When populated with the result of "select (sysdate) from dual;", regardless of what data type conversion (to_char/to_date) or what time formatting is used (attempting DD-MON-YYYY HH:MIPM), the displayed time is always 12:00AM.
    Thanks!
    Paul

    Can you post a small example of what you are trying to do on the hosted instance of APEX from Oracle? You are trying to get the following:
    SELECT TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MI PM') test_col FROM DUAL to format properly?
    It returns: 18-NOV-2010 09:51 PM in a one column report for me..
    Thank you,
    Tony Miller
    Webster, TX
    You can get more with a kind word and a two-by-four than you can with just a kind word
    Anla-shok Marcus from Babylon 5

  • The 'Reimport from Camera / Archive' button does not appear in my file menu.

    My last attempt to import material from my camera was interupted so not all the footage was imported to iMovie. I have re-attached the camera to try and reimport and the message on iMovie says that I should select the 'Reimport from Camera / Archie' option from the File Menu. Unfortunately, there is no such option in my file menu. I am using the latest version of iMovie 10.0 and my camera is a Panasonic HX-DC3. Help?

    i wasn't even interupted, it told me it had imported everything from my gopro then i aimlessly went onto edit. ejected the gopro, went down stairs. came up to continue only to find half of the vids missing from the project screen. telling me the file was missing as it was still on the camera. so i went to import again. it told me done. no not done still on camera only. then when i go to consolidate event files it tells me they are already there. no not there. i went to share finish project (after pluging gopro back in and finishing project with half the vids in the libary and the other half stillon the camera) it lets me share to the new iMovie theater but when i go to youTube it it tells me it cant as half of the files are still on the camera.
    i hover over the camera icon on the video file in the project screen where it pops up a info window telling to reimport from camera/archive......... from the file/menu...
    hm hmmmm
    nowhere to be found.
    think you forgot a few things apple.........
    fix it up

  • Update of SU24 Data in RAR - Permission objects does not appear in Funct

    Hi All,
    We are using SP9 of RAR 5.3. We have developed custom objects for many custom transacitons and hence wanted to update the same in GRC for permission level configuration.
    We extracted the latest SU24 text files and uploaded as per the procedure mentioned in the post installation guide. The text files got uploaded successfully and also the full synch of User, role and profile background job was successful.
    But still the permission + tab is appearing blank for the custom t-codes without pulling any authorization objects. Due to which we are unable to enable the permission objects to the t-codes.
    We have uploaded the SU24 data separately to 2 different physical systems of Dev & Quality. Whereas the rule set is defined for Logical system of Dev & Quality.
    Did we missed any step in the process of uploading the text files?
    Please advise.
    Thanks and Best Regards,
    Srihari.K

    If you have configured RAR to include logical systems you need to generate the rules from the configuration tab, Rule Upload, Generate Rules.  Generating rules from the Rule Architect is very inconsistant if you are using logical systems.

Maybe you are looking for