GPS Devices Connecting to Mac 10.8 Via USB 3.0?

Hello,
Does anyone know if there an issue with GPS devices communicating with Mac 10.8x and/or Apple's USB 3.0 that is on their newest models? Yup, I did send Garmin a support request and got a canned answer that is useless.
Garmin does indeed have a service bulletin on an incompatibility with their FlyGarmin.com site, but there is no mention of their other basic Mac software. Google Earth initially sees the Garmin, tries to crunch the data, then states that "no device was found". The same is true with a couple of other programs that used to work well with my Garmin. My 2012 MacBook Pro (with backward compatible USB 3.0) does not even register that a Garmin GPSMap 495 device is connected (via Apple's System Information), yet a legacy Mac Pro with Mac 10.6x does.
More microchips than sense,
Dr. Z.

Update:
I have an HD Camera model (ContourHD) that is also unable to connect, yet a newer model (Contour+2) from the same manufacturer connects just fine and with the same cable. Connecting the problem camera to my legacy Mac Pro finds it functioning as designed. Once again, I am wondering if there is a hardware issue with the first generation of Macs using the USB 3.0 technology. Maybe there is a USB 3.0 driver update and/or firmware update for the individual devices that needs to be designed? Macs have always been so good with seemless connection...
More Microchips than sense,
Dr. Z.

Similar Messages

Is it possible to connect a mac book pro via thunderbolt and a dvi switchbox (multiple computers) to a thunderbolt display?

Hi,
I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
-ais-swiss

ais-swiss wrote:
How to connect windows laptop (vga) to thunderbolt display?
AHHH??!!!!!! Was that your original question?? I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display. If THAT is what you're trying to do, then NO.... You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
I wonder why apple doesn't state this in their technical descriptions...?
-ais-swiss
Actually, the state that information all over the Tech Specs on the Apple Store website.
http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
Here are two different statements from that webpage:
So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices.

ESATA: connecting 2 mac pro's via esata to each other

has anyone tried to connect 2 mac pro's via esata directly to each other (instead of the slower ethernet connection)? i was hoping to install esata cards into the pci-express slots into 2 mac pros and instead of the usual ethernet connection between the 2 so they can file share, i was hoping for a faster estata connection if that is possible. would i see the computers in the usual finder window under "shared?" note: the mac pro's would be physically close to each other, so cable length connection is a non issue.

Hopefully no one would try this.
NAS or FiberChannel like Apple did with XRAID.
OS X client is not designed to handle file-locking and device sharing, not in this manner.
Linux or HP type media servers

IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0

Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).

I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks

Is it possible that iMac corrupts connected external hdd-s drive via USB?

Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
strange.
if anybody has a clue?
update 1:
i found this post also:
https://discussions.apple.com/message/15905481#15905481
I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.

It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Cannot find other than "Camera Roll" in my PC when my iPad2 is connected to Window 8.1 via USB to my Lenovo PC

When my iPad2 is connected to Window 8.1 via USB to my Lenovo PC, I can not find Albums other than the Camera Roll. Is there a method by which I can make other albums visible to my PC? I am trying to copy them manually into a portable harddisk so all my photos and Videos in my iPad and iPhone will be backed up in one location for convenient access of all my photos & Videos.

Use windows Import utitlity is the only other way I do believe

How connect iPhone to TV (Philips) via USB?

How connect iPhone to TV (Philips) via USB, because TV does't recognize iPhone.

http://support.apple.com/kb/ht4108
http://support.apple.com/kb/HT1454

I get the question mark in the folder on start up, but if i connect the same hard drive via usb it works fine is the hard drive faulty?

but if i connect the same hard drive via usb it works fine is the hard drive faulty?

It sort of sounds like a startup disk issue. Have you tried starting up holding down the "Option" key? This should generally give you the option of which drive you want to boot from after a few seconds. Sometimes, especially if you had previously booted from an external drive (and it sounds as if you have) they system wants to continue booting from that drive. If it can't find it, it just sort of hangs there. Try holding down the "Option" key and see if your internal drive is shown as an option. If it is, select it. If you manage to get into the OS, go to System Preferences / Startup Disk and select the correct drive (even if there is only one drive shown, you should still select it).

Can I access my external harddrive if I connect it to my Airport via USB?

I have a basic router providing a wireless network and access to the internet (given by my internet provider). And then I recently bought an Airport adaptor and connected my stereo, and now I'm playing music wirelessly.
My question is then, will I be able to access my external harddrive if I connect it to my Airport via USB?
It's an Airport Express Base Station (the one with only jack, usb and ethernet)
Thanks

Sorry but the USB port on the AirPort Express (AX) does not support USB hard drives.

How can i connect my Simmons Electric Drums via USB

i need to find out how i can connect my simmons e-drums via usb to sountrack so i can record with a song. does anybody know how?

You are not allowed to record using MIDI with STP ... You can do with Logic
However you could record your audio (using an audio interface) coming from your Simmons in STP
Bye

Why can't I get the device folder when I connect my iPhone to PC via USB?

When connecting my 4s to a PC via usb, I cannot get the window with the folder containing fotos and other items. It only appears a camera / scanner or windows as options to open. Why? Is it the result of upgrading to OS 6.1.3? Thank you.

iPhone is designed not to be able to transfer content that way. You can import photos and videos ( http://support.apple.com/kb/ht4083 ) but there are limits/restrictions. For example, you can sync music that you downloaded from the internet to the iPhone, but not transfer it back to a computer. This has everything to do with music rights/legal stuff, you can only transfer purchased items from the phone to a computer using iTunes.
hope this helps !
Also, check out: http://support.apple.com/kb/HT1296
Good luck
Message was edited by: jesterwylde

Connecting kurzweil sp88 to GB I want to connect my Kurzweil sp88 to GB. The Kurzweil has a baffling array of buttons and possible MIDI channels. It also has the old style MIDI plug ins. I've got the MIDI out connected to my MacBook Pro via USB adapter.

I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]

First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels.

Laserjet 1505 connected to AEB 802.11n via USB keeps timing out after print

I have a HP Laserjet 1505 connected on my AEB 802.11n via USB and shared on my network, on my network are two macs connected via wifi and 3 WinXP PC connected via wire. I have Bonjour and WinXP laserjet drivers installed on all Win PC. Everytime I print from any of the computers, it will print the first time, but when I try printing again from any of the machines, the macs and winxp pc's cannot detect the printer. When I go to airport utility, the printer cannot be detected anymore. I have to hard reset the AEB for it to detect the laserjet printer again. But the same thing happens again after I print out another document. Has anybody encountered this kind of problem. Can anyone help me resolve this?

Here is what I got from HP support :
The driver for the Laserjet P1006 is not available yet for Os 10.5...we are hoping it will be release in the next week or so...please click on the link below to sign up for an email update as soon as it is available..As a workaround, some people have been able to use the 10.4 driver from the cd, but this is not guaranteed to work in all applications therefore the only solution is to wait and install the 10.5 driver.
So we wait.
Yves

Tried to connect ipod to sound system via USB and asked to format. Pls Help

I have tried to connect my ipod to the dvd system via USB port. It asked me to format the ipod and i pressed yes and than instantly plugged the ipod out [realized what i did]. anyway the meessage on the scereen was that I had to connect it to the pc and itunes to resolve the problem. When i connected Itunes asked me to restore it. I know that if i restore than i will lose all my music. Is there is any other way to fix it?
Thank you very much I really appreciate your help.

Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.

GPS Devices Connecting to Mac 10.8 Via USB 3.0?

Similar Messages

Maybe you are looking for