Gps gone crazy after 7.1 update

Hi everyone.
I ran my daily routine on a standart route. But after last ios update (7.1) my iphone 5's gps receiver gone crazy. I'm using Runkeeper for keeping data. But I've tried runtastic and moves too. Its all same. I attached a screenshot, so you can understand what I mean. I hope you can solve this problem quickly, because I'm losing money each day that I miss my commitment on the app "gympact".
Thanks

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Similar Messages

  • Garmin GLO portable GPS quit working after latest Apple update

    Garmin GLO quit working after latest Apple update ?

    I am using Mountain Lion. I reset the system a thousand times. The Mac communicates fine with the printer, that's not the problem.  Somehow, recently something changed in the ppd file for the LaserJet 1320 that it simply does not print properly. For instance, I sent a job to print two pages, and use the duplex. The duplex works, but then the other side comes out empty.  Is there a place I can find the old - less secure, I don't care, I just want to print - ppd file for controlling the printer? I think the printer only supports certain level of Postscript commands, and the new ppd file expects a new level. This printer is 8 years old after all. If I plug the printer in Linux, it prints the same document fine.
    Thanks for any help

  • HiSense stereo headphones drive iphone 4 crazy after 4.21 update

    Hi! iphone 4 with ios 4.1 - no problem using hisense stereo headphones, especially with the nike application. After the 4.21 update, I can't pair with the iphone. What's worse, just turning on the headphones near the iphone cause the iphone to enter an endless cycle of 'bluetooth on- bluetooth off'! What a disaster! Help

    My phone & computer completely froze when trying to do this update - not even 1/4 of the way through. (I left it for hours thinking it was just slow) I couldn't get it off the computer screen and my phone was stuck as well - eventually I had to restart the computer and then the phone showed the icons of the USB plug & Itunes on the screen, so when itunes loaded it said my phone was now in Recovery Mode and needed to be restored!!! Well I tried restoring it TWICE - and it wouldn't install past that 1/4 mark (where the update froze) - the second attempt I got an error message that itunes encountered an error and could not continue... but they'd let me know if they find a solution to the problem. GREAT. Now I have no phone at all.
    PS - I did a whole clear out on the computer of the files, caches, etc. - Even ran a malware scan - restarted, installed the new itunes 10 - everything I could possibly think of to get my stuff up and running again. Unfortunately so far nothing seems to work. Anyone else get this???

  • Ipod screen gone white after using 2006 updater!

    hi...my 5th generation video ipod has just had an update and the screen froze after i removed it... the screen then instead of resulting in the apple logo turned white and it is stuck like that. When i try again to restart it only turns black for a while makes a few beep noises and then the screen turns white again .... HELP!

    Apple engineers have determined that this is caused by not allowing the firmware update to finish the installation before disconnecting the iPod.
    If the reset previously mentioned doesn't help, then put the iPod into forced disk mode, and use the updater to restore the iPod.
    With your iPod not connected to the computer, reset it for about 5 seconds.
    Then press and hold the select and the play/pause buttons for another 5 seconds or so. Then it should be in disk mode.
    Wait until the restore has finished before disconnecting the iPod. If you're unsure, wait at least 20 minutes (it's probably overkill but best to be sure).
    That should cure the issue.
    If however it doesn't, and your iPod is still non responsive (doesn't reset, nothing on the screen or button presses don't work), then it will have to be sent away for service.

  • External disk space gone crazy after upgrade to SL

    Hi,
    I have just upgraded from Leopard to Snow Leopard, and am now running 10.6.3. I have an iomega 320GB external USB hard disk which I use to back up via Time Machine, and also to periodically back up a virtual machine which is not backed up by Time Machine. Prior to upgrading, there was about 3GB of space on the iomega drive, the TM backups were taking about 251GB and my virtual machine backup was taking the remaining 66GB.
    The first time I connected the iomega drive after upgrading to SL, I wanted to deleted the backup copy of the virtual machine (66GB), so I navigated to it in the Finder, right-clicked on the folder and selected "Move to trash", whereupon it duly disappeared. (I thought it slightly odd that I didn't hear the drive making any sound – I thought I should be able to hear it pysically deleting the file.) I then tried to copy a new virtual machine file of smaller size onto the iomega drive, and got an error message that there was not enough disk space. I selected the drive in the L/H pane of the Finder window and hit Cmd-I to get info: this told me the following:
    Capacity 319.73GB
    Available 1.89GB
    Used 317.84GB
    I know that the files I just deleted from the iomega were around 66GB, so why isn't there at least 66GB of free space? I have not run Time Machine since upgrading, so there is no way the TM backup set can have somehow expanded to fill up the additional space. I have run Disk Utility and tried repairing the drive, but this has made no difference. I then selected the Time Machine backup set on the iomega drive, which is a folder named "Backups.backupdb", and hit Cmd-I to get info. The get info window popped up and said it was calculating the size of the item. Some six-and-a-half hours later, it finally concluded its calculations and told me that the backup set is... wait for it... 4.54TB! (4,458,364,261,372B to be precise...)
    What is going on? I'm aware that SL uses a different basis to measure disk space, but this does not explain where 66GB of freed up space has suddenly "disappeared" to, or why this backup set appears to be 14 times the physical size of the disk it's on!
    Am I going to have to erase the drive and lose all my previous TM backups, or is there some other way around this?
    Thanks in advance,
    Rob

    After you selected move to Trash, did you remember to then empty the Trash? When you move something to the Trash the Finder puts it in the invisible Trash folder of the drive in question, and there it stays until the Trash is emptied with the drive mounted.
    I have many crackpop theories about things, and one of them is that Apple has somehow messed up the Finder's ability to calculate sizes in the newly rewritten Snow Leopard Finder. Mind you, Finder has not been very good at doing this for a very long time anyway, but it seems to me it has gotten even worse. Nonetheless it should be able to get an answer that makes sense using the GetInfo function for a drive, although it will take longer than it seems to me it ought to do (but in the range of minutes rather than hours). Thus GetInfo on my Time drive shows
    Capacity 249.93GB
    Available 140.95GB
    Used 108.97GB
    A result returned remarkably quickly (for a change). Using the disk usuage command in Terminal, where the results returned are shown in the "old" size format rather than the new PR influenced format, shows this:
    NoobiX:~ francine$ sudo du -cxhd 1 /Volumes/Time
    Password:
    1.4M /Volumes/Time/.fseventsd
    1.5G /Volumes/Time/.Spotlight-V100
    0B /Volumes/Time/.TemporaryItems
    0B /Volumes/Time/.Trashes
    0B /Volumes/Time/.vol
    5.4G /Volumes/Time/Applications
    77G /Volumes/Time/Backups.backupdb
    7.6M /Volumes/Time/bin
    0B /Volumes/Time/cores
    0B /Volumes/Time/dev
    0B /Volumes/Time/home
    7.0G /Volumes/Time/Library
    0B /Volumes/Time/net
    0B /Volumes/Time/Network
    510M /Volumes/Time/private
    5.2M /Volumes/Time/sbin
    3.8G /Volumes/Time/System
    3.8G /Volumes/Time/Users
    1.0G /Volumes/Time/usr
    4.0K /Volumes/Time/Volumes
    100G /Volumes/Time
    100G total
    Terminal takes a bit of time to return the above results, but again it is in the range of some minutes, not hours. If you DID remember to empty the Trash after moving the files to it, you might try running the du command in Terminal to see where the stuff is.
    Copy and paste this into Terminal
    sudo du -cxhd 1
    press the spacebar, then drag and drop the mounted volume into the Terminal from the Desktop. Press return, enter your admin password (which is not echoed to the screen in any way whatsoever), press return again, and go have a cup of coffee while the sizes are calculated.
    Finally, the repair disk function in Disk Utility is not particularly robust. To truly repair a disk with siginificant problems you need something like Disk Warrior.
    Francine
    Francine
    Schwieder

  • My wireless keyboard that came with my iMac has gone crazy after changing batteries

    When I try to type my user name and password random letter repeatedly appear. This occurred after I removed old batteries, cleaned the keyboard with a cloth and replaced the batteries.

    This what Miriam is talking about:
    How to Pair your Remote to your Mac:
    http://support.apple.com/kb/HT1619?viewlocale=en_US
    (Sorry Miriam!)

  • HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

    After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

    Hi 1283ar.
    Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
    However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
    If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

  • Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.

    Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.
    I have been on the phone multiple times with Verizon, visited multiple stores and still getting different answers with every different person I talk to...
    Since the 4.4.2 update, my phone and my wife's phone (14 or 15 month old SIII's) that worked perfect a couple weeks ago no longer know where they are 95% percent of the time... Location cannot be found and GPS satellites cannot be seen (sometimes after searching for 10 - 20 minutes they will lock on).
    And it's not just Google maps, it is all apps that need location (ie. gps status and toolbox, weather channel, etc...)
    Google maps has us in the right location 50% of the time  but i think that has more to do with 4g and wifi (although i always know the weather and traffic conditions in the next town over now).
    Navigation will set up fine in Google maps until you actual move the car. Then it updates location every couple minutes, but usually a couple streets over from where I actually am. Maybe 1 out of every four or five times I try it, it will start working about 15 minutes after I started it (then work flawlessly, so it can actually work sometimes). But if you end the process and start over to see if it really "works", back to square one with it not knowing its location all over again...
    I obviously did all the normal trouble shooting fixes with the battery and sim card removals and even did a "recommended factory data reset" on my phone with no luck. After this didn't work I stopped by another verizon store yesterday that has "tech services" that I was told could run some sort of diagnostics on my phone. After I showed the tech all the screen shots i have taken of what was happening while driving, he said it is a software problem and a very common one at that.
    I was told I should either buy new phones or switch to the edge program where i can get a new phones. These don't seem like very fair solutions to me considering before the 4.4.2 update our phones worked perfect and they are both in almost perfect condition after 14 or 15 months...
    Will there be a fix to this??? Is it a Samsung problem??? Should I be contacting them???

    If it is 3GS, you can update it to iOS 5 and it will work.

  • After an automatic update my files are gone. How do I get them back?

    after an automatic update my files are gone. How do I get them back?
    Working on a Mac Book Pro OS 10.7.3
    Missing files: pictures, photos, documents (written files)
    All in the map documents; aliases on the desktop
    The desktop was rebuild too, not the same anymore and all aliases gone.

    I suspect you didn't back up your data before the update - that would have been your first insurance. At the least, you could have saved your most important documents. I realize you probably don't want to hear that, but it's a good way to avoid problems.
    It would be great to get a few answers:
    1. What did you update? Was it a software update, a firmware update, or something else?
    2. Do you use external drives? Or is it just the HD on your MBP?
    3. Why did you "rebuild" the desktop?
    Provide as much detail as you can.

  • After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping

    After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping but my iPhone 5 is great no troubles at all HELP

    Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
    Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
    and http://www.apple.com/support/ipod/service/battery/

  • After an automatic update my files are gone. How do Iget them back?

    after an automatic update my files are gone. How do I get them back?

    Do you know the name of any of the files you are looking for?  Do you have a Time Machine backup? Can you search (using spotlight) for any of these files?
    Any chance they were in the trash when you started the update?  Any chance they were on an external drive which is NOT plugged in at this time?

  • HT4972 After I've updated IOS in my iphone, all the applications, musics are gone.  How do get everything back?  Thank you.

    After I've updated IOS in my iphone, all the applications, musics are gone.  How do get everything back?  Thank you.

    Plug it into iTunes, Control-click on the iPod in the left frame and select "Restore from backup." Should put it back like new.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • After recent FF updates, many menu CONTENTS are gone!

    After recent Firefox updates (most likely during August 2014), several pop-up menus and the like no longer show the actual content. The menu frame and some buttons still appear, but the main "business" part of the menus are gone!
    For example, the Firefox Tools->Options menu shows NOTHING but an empty frame and the "OK", "Cancel", and "Help" buttons.
    This is difficult to explain in words, but since I don't see any way to post images here, allow me to link to my post on the Mozillazine forum where image posting is allowed:
    http://forums.mozillazine.org/viewtopic.php?f=38&t=2872799
    The problem definitely exists in FF 32.0.2 and 32.0.3, but I suspect it existed earlier. The same problem exists on every Windows 7 computer I own.

    hello, please try to disable the ghostery addon and see if you can still reproduce the issue then...
    https://getsatisfaction.com/ghostery/topics/problem-with-firefox-32-firefox-option-is-not-displayed-when-ghostery-is-active-in-firefox-32

  • After today's updates, user/library has gone hidden as a system folder...huh?

    After today's updates, user/library folder has gone hidden as a system folder...is that normal? Tried repairing permissions, but still is hidden. Should I worry? thx!

    If you can't cope with the Option+Go method or need the Library during more complex operations, you can enter the following command into Terminal:
    chflags nohidden ~/Library

  • Nokia C7 GPS not working after belle update!

    Hi everyone, i had a C7, working great till i updated it with symbian belle.
    okay here is what i did.
    -my GPS was working on symbian anna with maps version 3.06beta
    -i updated the phone to symbian belle from symbian anna.
    -installed nokia maps 3.06 beta, and replaced the one that came with the update because it had the option of route planning which the installed map did not.
    -this was the first time i checked to see if the GPS was working after the update, and it did not work even after i stood in an open field for half an hour.
    -i learned that the latest update of nokia maps in fact had route planning, so i used the nokia PC suite to reset the phone software, and then later updated everything that was listed in the software update app.
    -my GPS could still not work after i stood in the same damn field for another half an hour.
    -now it will just give approximate positions based on the wireless networks, and not give any accurate position, so i cant use it for navigation anymore.
    -i tried running the gpsinfoqt app, and it keeps saying searching for a signal, but it never finds one!
    Please help me!! if there is any way i could flash the C7 or run a diagnostic or something so atleast i figure what is wrong!

    Hi akkudub, 
    Welcome to Nokia discussions board!
    Have you used Nokia Suite for the update? 
    I advise you to follow the steps below in order to get your GPS fully working again:
    1) Uninstall the current version of Nokia Suite that you have. 
    2) Clean the registry with a registry cleaner. 
    3) On your PC, go to Start > Run and type %temp% and click on "Run". Delete all Nokia folders from the folder that opens. 
    4) Download the newest Beta version of Nokia Suite from this link: 
    http://betalabs.nokia.com/apps/nokia-suite-beta
    You will need to sign in to your Nokia account - the same credentials used to log into this forum. 
    We will appreciate your feedback once you have tried this program!
    Once Nokia Suite is installed, please connect your device to it and perform the available updates if any is available. Alternatively please reinstall the current software. Also, click on the Maps tab and download the relevant maps files (Europe, UK etc...)
    Let us know how you get on and feel free to post any other questions you may have. 
    Regards, 
    astra2025
    Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Maybe you are looking for

  • OBIEE 11g: Blocking Analysis

    I was working on setting up Blocking Analysis, I read up on this in the Oracle documentation at... http://docs.oracle.com/cd/E21764_01/bi.1111/e10541/answersconfigset.htm I originally setup a javascript file and a CustomMessages folder for the XML, r

  • Computer Name With Number

    I was a beta tester of Yosemite and recently updated to retail.  This happened while I was a beta tester and I thought it would go away, but it hasn't.  My computer name is being followed by a (#) that continues to increase for no reason (e.g. (1), (

  • Shared services security and essbase security

    recently upgraded to sys 9 and now use shared services 931 we used to have security at essbase level previously and now its all Shared services.. now i have so many concerns Can we automate the security just like I used to automate in essbase earlier

  • Menu buttons briefly turn white when hovering

    When I hover over a menu button it turns white in IE and transparent in FF for about 2 seconds then displays the correct hover image. This happens the first time you hover, then it behaves normally after that. Take a look here http://www.preferreddig

  • Partitioning System drive iMac

    I want to partition my system hard drive 1) System OSX 2) Libraries Aperture, iTunes, ... But I first want to know 1) Does partitioning slows down your drive speed (read/write) or working speed 2) most important! Can I ignore ownership on the 2nd par