GPS location doesn't work properly after shift WIFI device to new office
GPS worked well before my office moves to new location. This month, WIFI and other network devices were moved to a new location because of office relocation, but GPS location on google maps and other apps still display as before, even I turn off the WIFI. Only if I go out the office, the GPS works properly.
Means that the office is so heavily shielded that GPS signals are not getting in AND the WiFi access points are not in Apple's database. Do you have cellular data enabled? That's a third way these phones try to guesstimate position based on celltower signal strength.
But if you're in a high security facility, none of the above will work. That would be the way it is designed.
Similar Messages
-
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport -
Stream video doesn't work properly after update to OS Mavericks
after update to OS Mavericks stream video doesn,t work properly!!! doesn't loaded stream video and stream audio from web sites (youtube, or other with stream video).
1. System Preferences > Other/ Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
http://get.adobe.com/flashplayer/?PID=7105813
Follow the prompts.
Quit Safari.
Restart computer. Relaunch Safari.
2. Enable Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
Press " Manage Website Settings" button for more options. -
I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac. My Safari doesn't work properly anymore. Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall? Thanks,
Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari. -
GPS DOESN'T WORK PROPERLY AFTER UPGRADE TO 2.2
I just upgraded to the version 2.2 software. Since updating, my 3G GPS is not working correctly...anyone else? Location Services are turned ON, but now the locater is only finding my general location...acurate to about 1/2 mile. Before the update, my GPS was locating to about 300 feet at this same location. I suspect that the GPS is not kicking in and the phone is locating postion from WiFi and Cell towers. Any ideas anyone??
My 3G GPS isn't working properly either and if I turn it on, I am unable to receive incoming SMS messages - - if I am able to receive them they are many hours or a day late or worse, it never arrives. I tried sending SMS message to myself but it never returned. Outgoing SMS and incoming/ougoing calls are fine though.
So what I did now was to switch off 3G so I am now left with an expensive regular cellphone with no internet capability. Bummer. Not what I really want - I would have settled for a Sony Ericsson instead if all I want is just a regular cellphone. -
Keyboard on Sat Pro 6100 doesn't work properly after remedial work
Hi,
My Sat Pro 6100 has just been away for the usual motherboard and power board replacement with Toshiba, but now I have a strange keyboard problem.
When I turn it on, all the keys work. After a few minutes, '3' doesn't work, then 'r' fails, then '5','7','8','9','0' stop working. At this stage I can feel something getting very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with an external PS2 keyboard, and the internal keyboard is still faulty (some keys work, others don't) but the external one works correctly.
Now if the pc didn't get so hot under the middle of the internal keyboard, then I would conclude that the keyboard was faulty, but for it to fail slowly and sequentially like this, and it fails the same way every day (Since the Toshiba rebuild!).
Maybe, internal keyboard controller overheating?
Does anyone know what this might be? :-(
Cheers,
HomerRight under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs into the same card). It is normal that this part becomes warm during usage.
It's strange that your problem appears after a while and not right away.
It might be just an improper reseating of the keyboard cable (it's a thin layer like a photo film-negative) that easily pops out, but... it can be something more serious, too. (Especially since you had the upgrade done where hardware had to be changed)
I would consult the service center once again and ask for instructions how to deal with this. Don't ignore it (by using an external keyboard instead of the malfunctioning internal) as it might end up into something more serious soon...
Regards
electrochain
P.S. Please keep us updated on your steps -
Gif doesn't work properly after saving to web?
I've taken a gif from the internet, cropped it, and plan to use it somewhere. The Gif works perfectly when I view it in Photoshop, but once I save it for web and view it through a browser, it doesn't work. How would I fix this? (I apologize for being rather vague)
Here is the original gif, and what I'd like the finished product to look like :
And here is what I'm getting after messing around with it :Hi,
With iChat Quit.
GO to the Applications/Utilities folder and launch Activity Monitor.
In Here find IMAgent in the list.
Use the Quit Button top left (And confirm Force Quit.)
Launch iChat.
8:54 PM Thursday; October 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Touchpad doesn't work properly after using of mouse.
On my macbook air I usually use touchpad only. But I use mouse to play games.
Sometimes when I do it, then exit the game, touchpad stops to work properly.
Mainly it works like usual, I can open files, close windows, follow links in Safari. But I can not close tabs (the x-mark doesn't apper). Also I can't select text with touchpad (only one work, by double clicking). Also I can't open sites via top sites panel, by clicking on them - only with keyboard. Probably there more small, but unpleasant things?
What can I do?
Reboot does help, but I don't want to reboot each time I play a game...If you installed any software to work with the mouse, remove it according to the developer's instructions, then restart the computer and test. Back up all data before making any changes.
-
Finder doesn't work properly after waking up from sleep?
I have a brand new MacBook Pro with Lion installed on it. It travels back and forth from home to work with me, and at work I plug it in to an Apple Display. When I leave work, I put the laptop to sleep and take it home. At home, when it wakes up from sleep, the finder does not work properly. Often, I cannot see any finder windows, and mission control does not show my various desktops, and only shows open applications. I have already tried throwing away the com.apple.finder.plist file, and it did not help.
Any suggestions are appreciated.Yes, change your display / colour profile to a different (or the default) profile. Has worked for myself, and many others on other forums.
Hope that helps...
D. -
Photoshop CS5 doesn't work properly after opening too many images
Hi
This is my very first post.
I'm also new to CS5. I do hundreds of photo touching/cropping that is a part of my job for web.
Everything is running fine but when ever I open too many images in Photoshop CS5 it doesn't work, I mean it doesn't hang or freezes it just open all files and then doesn't show any images (just blank) and when I closes 20/30 or more images then it get fine.
I thought it might a RAM problem but i have i3 processor with 4GB of RAM. I have also increased memory usage from 60% to 80% but I'm still facing the same problem.
Would like to tell that in the previous version of CS3 I never got this problem and worked fine.
thanks
--VenkatDisabling OpenGL entirely is draconian.
You could try, if it's not already set that way, going into the Advanced settings and switching OpenGL to "Basic" mode, which uses fewer resources.
-Noel -
Safari doesn't work properly after software update
After I've updated my MacBook Pro with the latest software I can't go to most of the websites, I want to visit. It just doesn't load 100%, sometimes I can't see anything but a white page, and sometimes I'm only allowed to see 50% of the page. Why is that? It seriously kills me! Please help. xx
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
IChat doesn't work properly after upgrading to 10.7.2
It just doesn't connect to my gmail chat account.
No error message or anything. It just sits there with that " ~ " symbol near where it says "offline".
What to do?
Trying to connect / disconnect doesn't do anything.Hi,
With iChat Quit.
GO to the Applications/Utilities folder and launch Activity Monitor.
In Here find IMAgent in the list.
Use the Quit Button top left (And confirm Force Quit.)
Launch iChat.
8:54 PM Thursday; October 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: coreaudio, 44100, buffer 512. now they are the same and i have noise. i've installed the latest drivers for toneport and changed the buffer settings. when the buffer is large, i can play some seconds without the noise but it appears after 15-20 seconds. and when the buffer is small it appears faster. i assume it has to do something with the buffer size but i don't know for sure. any ideas?
I have the same problem after updating to ML. It's unusuable for recording until it gets sorted out.
I think it's a problem at the Line 6 end. They are aware of it, and are working on some patch/fix to address the strange artifact sounds, so hopefully it will be ready soon.
See link - http://line6.com/support/thread/86574 -
I just updated to IOS 5 and now the calendar doesn't work properly. Can't enter a new event or change Calendars. Nothing updates from the Remiders either. Anyone have an answer as to what may be wrong?
I just updated to IOS 5 and now the calendar doesn't work properly. Can't enter a new event or change Calendars. Nothing updates from the Remiders either. Anyone have an answer as to what may be wrong?
-
My Macbook Pro with Maverick doesn't work properly when I restart it.
Hello,
I updated my O.S to Maverick in my Macbook Pro and this doesnt work properly with my wifi device BEAREXTENDER 1200.
I got this error when try to restart my computer.
I need some help : (
Thank u
Anonymous UUID: 2978698B-71D7-C168-62D2-BD94545F8053
Thu Dec 5 13:40:36 2013
panic(cpu 0 caller 0xffffff80040dc19e): Kernel trap at 0xffffff8004050944, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000005bb7000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff801999efd8, RCX: 0x0000000000000000, RDX: 0xffffff80046cb940
RSP: 0xffffff80f4bfba00, RBP: 0xffffff80f4bfba30, RSI: 0xffffff801999e000, RDI: 0xffffff8006bdd360
R8: 0xffffff80046d2b30, R9: 0x0000000000000000, R10: 0xffffff80f4bfb990, R11: 0x0000000000000009
R12: 0xffffff801999e008, R13: 0x0000000000000000, R14: 0xffffff801999e000, R15: 0xffffff8006bdd360
RFL: 0x0000000000010246, RIP: 0xffffff8004050944, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000008, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f4bfb690 : 0xffffff8004022f69
0xffffff80f4bfb710 : 0xffffff80040dc19e
0xffffff80f4bfb8e0 : 0xffffff80040f3606
0xffffff80f4bfb900 : 0xffffff8004050944
0xffffff80f4bfba30 : 0xffffff800405151a
0xffffff80f4bfbb10 : 0xffffff80044836e6
0xffffff80f4bfbb30 : 0xffffff7f859ad608
0xffffff80f4bfbb60 : 0xffffff7f859959b7
0xffffff80f4bfbb80 : 0xffffff800444c3d3
0xffffff80f4bfbbb0 : 0xffffff800444c24d
0xffffff80f4bfbbd0 : 0xffffff8004461e74
0xffffff80f4bfbbf0 : 0xffffff8004490e44
0xffffff80f4bfbc70 : 0xffffff8004490477
0xffffff80f4bfbcb0 : 0xffffff800449020a
0xffffff80f4bfbd10 : 0xffffff80044917dc
0xffffff80f4bfbd20 : 0xffffff7f84a7172a
0xffffff80f4bfbd40 : 0xffffff7f84c30b46
0xffffff80f4bfbd80 : 0xffffff7f84c305b6
0xffffff80f4bfbde0 : 0xffffff7f84c26980
0xffffff80f4bfbe20 : 0xffffff7f84c293a9
0xffffff80f4bfbe70 : 0xffffff800449fe19
0xffffff80f4bfbf00 : 0xffffff8004498b6b
0xffffff80f4bfbf20 : 0xffffff800404a15a
0xffffff80f4bfbfb0 : 0xffffff80040d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000->0xffffff7f84abbfff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f846ba000
com.apple.driver.AppleUSBHub(650.4.4)[1229941E-4CB9-3F57-B0A6-4A0AD595025D]@0xf fffff7f84c24000->0xffffff7f84c3afff
dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000
com.Ralink.driver.RT2870USBWirelessDriver(4.2.5)[EFF2AF46-F4BA-4385-137E-84630B 6FD95B]@0xffffff7f85994000->0xffffff7f85a2bfff
dependency: com.apple.iokit.IONetworkingFamily(3.2)[1EAD69CB-6AB4-387F-94C4-8FAAFF28354C]@0 xffffff7f856fc000
dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000003e00000
Kernel text base: 0xffffff8004000000
System model name: MacBookPro10,2 (Mac-AFD8A9D944EA4843)
System uptime in nanoseconds: 6704494044889
last loaded kext at 4782368779468: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8559b000, size 20480)
last unloaded kext at 4972309781655: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8559b000, size 16384)
loaded kexts:
com.Ralink.driver.RT2870USBWirelessDriver 4.2.5
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AGPM 100.14.11
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleIntelHD4000Graphics 8.1.8
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleIntelFramebufferCapri 8.1.8
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleSDXC 1.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBXHCI 650.4.3
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSurface 91
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOAcceleratorFamily2 98.7.1
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro10,2, BootROM MBP102.0106.B03, 2 processors, Intel Core i5, 2.5 GHz, 8 GB, SMC 2.6f59
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10F), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Network Service: Thunderbolt Ethernet, Ethernet, en3
Serial ATA Device: APPLE SSD SM128E, 121,33 GB
USB Device: Hub
USB Device: 802.11 n WLAN
USB Device: FaceTime HD Camera (Built-in)
USB Device: USB Receiver
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4The panic was caused by the Ralink device or its software. I suggest you disconnect the device, back up all data, and then remove the software according to the developer's instructions.
Maybe you are looking for
-
DA Client can't be resolved internally
Hi There I have a Direct Access 2012 R2 setup, and all the clients are working fine but we can't seem to resolve them internally. On a DC if I try and ping one of the live DA clients it won't resolve but a nslookup returns its IPv6 address. ping cis-
-
Satellite C55D-A-149 - Windows 8.1 depressingly SLOW
Hi, I was asked by Toshiba USA to post this here as my laptop is an European model. I recently got this laptop, so it is still new and so is the installation. The laptop is TOSHIBA SATELLITE C55D-A-149. I realise that this is a budget laptop and the
-
RAID-1 performance with Sun v40z
We are using Sun v40z machines with built in LSI RAID controller (RAID level 1). I was wondering about the performance of RAID on these machines. Our application does a lot of I/O (mainly random and sequential reads). Since we are using a RAID-1 syst
-
How do I set the location of a JOptionpane relative to the parentComponent. Everytime I code a JOptionpane the default location is always the center of the Container. How can I adjust or set the location of were the JOptionpane is shown in the Contai
-
Cp 5.5 - after i publish my cp5.5 project, the swf (or exe) won't play, just sits there
Hi all, i've been struggling with this for 2 hours and can't figure it out, hopefully it's something basic I'm doing wrong. I have a project that works fine in Preview mode in captivate (5.5). After i publish, though, to either Flash or exe, and try