GPS question about Michelin x-930 with Navteq maps...

I unfortunately have a Michelin GPS x-930 with a grossly outdated 2006 map by Navteq. Michelin no longer produces GPS equipment. Going to their old site is fruitless; their GPS site no longer exists for the US, only info on their tires, a GPS site in Europe exists.I have no idea how I could get a map update. Perhaps it would be just cheaper now to get a new entry-level GPS?

ypt wrote:
We've got a Sony sat nav and are in a similar position. Can only drive on the old roads - no problems, we don't have any new roads built in Essex,,,!!!!!
Excuse me!!!!!, you might have forgotten the A130 and the up and coming sadlers Farm Junction. Anyway get yourself a Tom Tom.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Similar Messages

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

CBWFQ: Question about the output of "show policy-map interface" command

Hi everyone,
I have a question about the output of "show policy-map interface" command.
The following is the output of this command and lower side of the output shows
(total queued/total drops/no-buffer drops) 0/342/0
If the packets drop occur due to the situation of no enough buffer,
"no-buffer drops" counted up. But "no-buffer drops" has not been counted up.
The "no-buffer drops" is 0 (zero) but "total drops" are counted as 342.
I guess there are other factors except "no-buffer drops" to add "total drops".
But I can not find any information about "other factors".
So I would like to know the "other factors" added to "total drops".
reserch-3725#sh policy-map interface fastethernet0/1
FastEthernet0/1
Service-policy output: shaping
Class-map: kdpc (match-all)
146956873 packets, 115209221595 bytes
5 minute offered rate 156000 bps, drop rate 0 bps
Match: access-group name YOKOHAMA_to_CHINO
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
9360000/9360000 58500 234000 234000 25 29250
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 146956724 3539850811 2960247 3851843541 no
Class-map: class-default (match-any)
552458414 packets, 249687580329 bytes
5 minute offered rate 242000 bps, drop rate 0 bps
Match: any
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
3072000/3072000 19200 76800 76800 25 9600
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 552453209 573909865 30358216 2926188156 no
Service-policy : policy1
Class-map: dlsw (match-all)
979578 packets, 264843255 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name acl-dlsw
Queueing
Output Queue: Conversation 137
Bandwidth 128 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 20922/17371500
(depth/total drops/no-buffer drops) 0/0/0
Class-map: telnet (match-all)
29938 packets, 1806058 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name acl-telnet
Queueing
Output Queue: Conversation 138
Bandwidth 64 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 639/38900
(depth/total drops/no-buffer drops) 0/0/0
Class-map: class-default (match-any)
551448911 packets, 249420939729 bytes
5 minute offered rate 242000 bps, drop rate 0 bps
Match: any
Queueing
Flow Based Fair Queueing
Maximum Number of Hashed Queues 128
(total queued/total drops/no-buffer drops) 0/342/0
Your information would be appreciated.

Details infomatiuon regarding show policy-map interface
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008010dd6a.shtml
http://www.cisco.com/en/US/tech/tk543/tk760/technologies_tech_note09186a0080108e2d.shtml
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/qos_r/qos_s2g.htm#wp1146884

I have a question about Configuration of Post with Clearing

I have a question about confiruation of the post with clearing which is t-doce 'FB05'.
When I make post with clearing on 'FB05', I can change the additional selections.
Where can I control the confiruation of the additional selections in t-code 'FB05'
Please, tell me the menu path.

Hi,
In SPRO, go to
Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Incoming Payments > Manual Incoming Payments > Make Settings for Processing Open Items > Choose Selection Fields
Hope this helps.
Thanks

Question About streaming live video with FMS3

Thank you very much for you efforts ...
I've tested an exciting tutorial about   streaming live video with Flash Media Server 3.5..
every thing went good and i could see my webcam broadcast from my machine through my web site but unfortunately I can't see it from any other machine
I'm using Microsoft windows XP SP2
and flash media live encoder 3
but my web server run UNIX
is this a problem???
Please send me feedback if its possible
thank you very much

Dear Janaki
Thank you very much for you efforts ....
i've done what you asked me exactly
this is what i got when I've opened the URL from my machine which runs the FMS
#Date: 2010-03-25
#Fields: x-category    x-event    date    time    x-pid    c-ip    cs-bytes    sc-bytes    x-sname    sc-stream-bytes    x-file-size    x-file-length    x-status    x-comment
session    connect    2010-03-25    23:11:17    7932    127.0.0.1    3073    3073    -    -    -    -    200    -
session    connect    2010-03-25    23:12:43    7932    127.0.0.1    3073    3377    -    -    -    -    200    -
stream    play    2010-03-25    23:12:43    7932    127.0.0.1    3139    3451    mylivestream    0    -    -    200    -
and when i opened it from another machine nothing changed or added to the log file
is it a problem with my webserver ??? its Lunix server and my OS is windows???
thank you very much

Multiple questions about using iWeb '09 with my Host Excellence, GoDaddy & Storenvy Accounts. Can you Help?

Hello, my name is Luis Diaz and I have always appreciated the help here in the iWeb community. I've been using iWeb for a long time. For some reason my usernames are not working lately - LuisDiazArt or RabidArt)
I updated my domain service with Host Excellence before MobileMe expired and thank you guys for the help with that. So far it's been a flawless service and because of that I'm very happy. I also have all my domains in GoDaddy. They have been very helpful
Okay I'm going to try to explain my current problem. I'm trying to create a subdomain in GoDaddy for my website: LuisDiazArt.com
I went and added a Subdomain in the Control Panel as: store.LuisDiazArt.com The subdomain suppose to mask my store: luisdiaz.storenvy.com
I thought by adding this subdomain it would make all the addresses look similar (and more clean) just in case someone gets lost along the way.
So what's happening after I waited an hour is I'm getting: http://store.luisdiazart.com/LuisDiazArt.com/Art_of_Luis_Diaz_%7C_LuisDiazArt.co m.html
I'm getting the huge and familair long addresses and it is not pointing to my store, but to the homepage.
Did I do something wrong or do I not understand something fully about subdomains? I thought you can make a subdomain point to another site. Perhaps it can't be done the way I'm thinking about this.
So to fix this issue I am thinking about making a duplicate website with a different domain name (RabidArt) and mask it with LuisDiazArt (this is site name I use on business card and everything else). After that make a subdomain with the same: http://store.luisdiazart.com
Perhaps this may fix the problem.
So to do this I may need to add another site onto my account (Basic and not Business) on HostExcellence.
So my other questions are:
Can I have multiple domains or websites using iWeb on a Basic Host Excellence Account? I checked out a few websites, but couldn't really find out if I can have multiple domains/websites using iWeb on Host Excellence with my current account.
I do know how to make a new duplicate site, but do you publish it the same way as you would with the regular site or do I have to so something different?
Hopefully the problem can be fixed not having to do a new site and maybe it was something I did wrong when I added a subdomain.

To add more domains you need to upgrade your account.
To have a sub domain for your store you need to create a separate site in iWeb and upload these files to the store.luisdiazart.com folder.
The files for the main site go in the luisdiazart folder.
Use an external hyperlink to link one to the other.

Questions about TANDBERG MXP 550 with Call manager 4.2

Hello,
I have an TANDBERG MXP550 configured as an H.323 client in call manager 4.2 without a gatekeeper.
1. When I make a call between the TANDBERG and another phone registered. I have the ip address of the call manager displayed on the screen instead of the extension number. Is it possible to display the extension number without a gatekeeper ?
2. The other question is about the streaming. Can I get and read the multicast stream on a PC with a software client ? I tried with VLC (VideoLan Client), with the multicast address I don't get the stream. When I activate the Session Announcement Protocol (SAP) I can receive the stream, but the video is bad (probably a codec problem). Did somebody find a software client which reads the multicast stream?
Thanks,

Call manager provides the called party with the extension or directory number of the calling party on a display. You can use the Calling Line ID Presentation field in the Gateway Configuration window to control whether the CLID displays for all outgoing calls on the gateway.Refer URL
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e48b.html#wp1051056

One question about lcds2.5 link with java

when i am creating a custom Message Service adapter,found a
question with rewriting invoke() method.
java class :
package test;
import flex.messaging.services.ServiceAdapter;
import flex.messaging.services.MessageService;
import flex.messaging.messages.Message;
public class TestAdapter extends ServiceAdapter {
public Object invoke(Message message) {
MessageService msgService = (MessageService)service;
msgService.pushMessageToClients(message, true);
msgService.sendPushMessageFromPeer(message, true);
return null;
error:
service can not resolved about MessageService msgService =
(MessageService)service;
please tell me a method :how to write this TestAdapter class.

ths, i can success.
but one error occur when i send message from java class to
lcds2.5 service.
i tranfer this IMessageUtil interface's setMessage method,set
param as "test",but no value in mxml file's mx:Consumer .
my message-config.xml is correct.
message-config.xml:
<adapter-definition id="fdschathandler" class="test"/>
<destination id="fdschat">
<properties>
<network>
<session-timeout>0</session-timeout>
</network>
<server>
<max-cache-size>1000</max-cache-size>
<message-time-to-live>0</message-time-to-live>
<durable>false</durable>
</server>
</properties>
<channels>
<channel ref="my-rtmp"/>
</channels>
<adapter ref="fdschathandler"/>
</destination>
java class:
package test;
import flex.messaging.MessageBroker;
import flex.messaging.MessageException;
import flex.messaging.messages.AsyncMessage;
import flex.messaging.messages.Message;
import flex.messaging.services.MessageService;
import flex.messaging.services.ServiceAdapter;
public class MessageUtil extends ServiceAdapter implements
IMessageUtil {
public Object invoke(Message message) {
try{
MessageBroker broker = MessageBroker.getMessageBroker(null);
MessageService msgService = (MessageService)
broker.getService("message-service");
msgService.pushMessageToClients(message, true);
msgService.sendPushMessageFromPeer(message, true);
return null;
}catch(MessageException ff){
System.out.println("fff:="+ff.getErrorMessage());
catch(Exception e){
e.printStackTrace();
return message;
public void setMessage(String mess) {
try{
AsyncMessage message=new AsyncMessage();
message.setDestination("fdschat");
message.setBody(mess);
this.invoke(message);
}catch(Exception e){
e.printStackTrace();
mxml:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="consumer.subscribe()">
<mx:Script>
<![CDATA[
import mx.messaging.events.MessageEvent;
import mx.messaging.messages.AsyncMessage;
import mx.messaging.messages.IMessage;
private function send():void
var message:AsyncMessage = new AsyncMessage();
message.body = msg.text;
producer.send(message);
msg.text = "";
private function messageHandler(message:MessageEvent):void
var msg:AsyncMessage = AsyncMessage( message.message );
log.text += msg.body + "\n";
]]>
</mx:Script>
<mx:Producer id="producer" destination="fdschat"/>
<mx:Consumer id="consumer" destination="fdschat"
message="messageHandler(event)"/>
<mx:Panel title="Chat" width="100%" height="100%">
<mx:TextArea id="log" width="100%" height="100%"/>
<mx:ControlBar>
<mx:TextInput id="msg" width="100%" enter="send()"/>
<mx:Button label="Send" click="send()"/>
</mx:ControlBar>
</mx:Panel>
</mx:Application>

Question about Raid set up with (SB600) K9A2 Platinum V 1.0

I am having trouble setting up my raid. I am using Windows XP Pro and go through the usual set up procedures using F6 command then installing the drivers etc. Once I get everything up and running installed on Raid 0 the computer works very well for a few days. Then later BSOD. The first was a 0000007b stop error, then I got the system back up again only to have it a few days then another BSOD 00000024 stop error. This time I was not able to bring it back. I thought my problem was linked to a RAM issue as I was using OCZ PC2 6400 DDR2 OCZ2G8008GQ (2X2GB). The reason I thought this was when I went to the motherboard site for approved ram, this ram was not there, then on OCZ site it was also not tested, then I went to newegg and used thier motherboard ram compatability screener and it did not show up either. So I bought the Giel ram and am now trying to set it back up again though I could not get it back still. So I finally just reformatted the drives (using another computer and a hard drive enclosure)and am getting ready to reinstall everything. I want to make sure I am using the right SB600 drivers for my application. I should be selecting AHCI X86 or x64. This does pertain to the operating system (I am using Win XP 32 Bit) or the processor (I am using the Kuma Athlon X2 7750 2.7Ghz)
I believe I should be selecting the x86 drivers when installing windows. Am I right? I just want to make sure I do not screw anything up so as to bring on the horrible BSODs again. I realize this could be some driver issue as well that could have caused this. I did everything I could to make sure it was not the hard drives.
The last question I have is: In order to ensure proper operation of the dual channel ram, (I have read the book, still confused a bit), I must install the ram with one stick in the first slot nearest the CPU and the other in the first slot of the opposite color? In this case Green/Orange slots.
Mainboard: MSI K9A2 Platinum 790FX
CPU: Athlon X2 Kuma 7750 AM2+ 2.7Ghz Processor
CPU-Cooler: Factory Supplied
RAM: 4GB (2X2GB) G Skill F2-8500CL5D-4GBPI DDR2-1066 Dual Channel
GPU: AMD790FX
VIDEO: PowerColor HD4830 512MB GDDR3
HDD: 2 Velociraptor 150 10000 rpm drives WD1500HLFS
DVD: ASUS DRW-22B1LT SATA Drive
Floppy: YES
Power Supply: CORSAIR CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready
OS: Windows XP Pro SP1 (Updated to SP3)

I was just trying to obtain the fastest load times/install times. When the machine was first running it was very quick with no cpu temps running beyond 34C, no abnormal performance. This is my wifes computer though. Things began to go astray after she updated through windows update to SP3. I am now using a slipstreamed CD with SP3 already on it. She said she was clicking on the internet explorer "E" icon and it just shut off. THen when it rebooted (it was still set that way in windows recovery) it started loading windows then BSOD 0000007b error. I fixed it by finally getting into windows recovery and running fixboot, then fixmbr, then chkdsk /r /f. It started working fine again. Then later maybe two days later it happend again this time wihtout the restarting. She was working on something else this time and it shutdown again. This time when it tried ot reload windows I was getting the ntfs.sys issue with a 00000024 stop error. I could not do the same magic with windows recovery any longer. When I tried it indicated it repaired the boot, the mbr, but when I tried to run the chkdsk, it gave me disk read errors, such as "this disk has unrecoverable errors". I used Western Digital test programs on the drives by removing them and installing them into an enclosure and taking them to a good computer. One drive I could see in windows and it reflected 140G/B, the other would pick up but not in my computer. It also showed the drive as having the entire quantity as the RAID together had of 298G/B versus the real size of the drive 150G/B. I just figured that was the drive that was set up as LD 1 in the RAID setup (prior to windows) and possible was the drive with he boot sector on it??? I could get another drive and include it into the array, but then just figure I will have to worry about 3 drives versus 2. She keeps improtant backup stuff on an external drive. I will tone down the ram to 800. Should I set the latency in Bios though to the 5-5-5-15? or just leave everything at auto like I hade done before? Though this ram is new and was not in the computer when this happened. I had replaced the other OCZ Gold stuff and put in the G Skill stuff I have now. I had previously stated Giel, but it is G Skill, sorry about that. I may just do what you say, guess sleep on it and decide whether to just install the drives with OS/Programs on one and data on the other.

Question about redeploying a Project with multiple packages

I know that if I make changes to a single package within a project in SSIS 2012 that the entire project must be re-deployed. Also, I know that the project version is updated when it is re-deployed. My question
is about the packages in the re-deployed project that have not changed. Does anything actually change in the unaffected packages when only a single package is modified? Do the Identifiers for the all packages change or just the package
(or packages) that have been modified? I'd really like to hear from someone with actual experience with this issue.
Harold Jackson

Since you rebuild the version of the package gets incremented. No structural changes occur.
Arthur
MyBlog
Twitter

Question about using TX FM with Win

I am using the MuVo TX FM 256 with Windows 98, and so I am using Windows Explorer to transfer files, (I have not installed Creative software). There's no "Safely Remove Hardware" item that I know of. Is there anything wrong with just removing the player from the USB dri've without "warning" the machine in any way? I've been doing it this way for about one week now, without problems that I can see, (though the LCD screen sometimes darkens upon removal).
Another question, though this one is not something I'm immediately concerned with:When I fast forward in an mp3 longer than 7 minutes, the time does not update, (it shows the same time), until I let it "play" again, at which time it reads the correct time. Since it reads the correct time at all times except when it's fast forwarding or rewinding, it's nothing more than an inconvenience. Btw, it's firmware ..0, and I'd rather not change it since this works well enough, after reading about some of the firmware problems.
Joe

All the "safely remove" function does is shut the device down properly and close any program links with it.
If you aren't using the device at the time chances are things will be OK.

Question about my msi r6770 with 3 port the (HDMI,DVI,D-Sub)?

i bought my videocard msi r6770 with only the D-sub connector in the package in the box..
my vcard has 3 ports the HDMI, DVI, D-Sub
what is the diference betwen the 3?
so can i use the other cable the DVI and HDMI?
what is the diference if i use D-sub and Dvi, or HDMI advantage and disadvantage?
my monitor is SA300 with port DVI and D-Sub..

I actually just answered my own question right before I saw your reply. But thank you for confirming what I thought. That makes a lot of sense. I already have my existing DVD player set up with the component video cable and you are correct about needing an audio cable. I learned that through a process of elimination when I was setting that up and I have plenty of extra audio cables in my closet, so we're definitely on the same wavelength. My existing DVD player doesn't have the HDMI capability but the component video cable is fine. Now I just have a better understanding of how this works. I believe that my existing DVD player is analog but it's very good and I will glady keep it until it goes.
I was also just fooling with my TV settings. On my "source" list, I had had TV selected as source but I switched it to HDMI, which is what I already connected to my HDTV --- what a difference in sound and picture quality.

Question about RADIUS server configuration with a MacBook Pro

Hello,
I own a modem router which is capable of WPA2 Enterprise and I want to use it with a RADIUS server for authentication and security purposes.
However, I have a few doubts about this.
MY CONFIGURATION:
The modem router would be connected to a fixed PC with Windows and to a MacBook Pro (both with Ethernet)
The RADIUS server would be running on the MacBook Pro (freeRADIUS)
The bold is the issue, that comes when I disconnect the MBP (it's a notebook, so I use it disconnected from the router sometimes).
Supposing the router would have recognized it (correct configuration), it would disconnect from it.
My questions:
Would Wi-Fi be lost in this manner? Or would the modem router automatically switch to another Wi-Fi authentication?
If I reconnected the MBP to the modem router and re-run the RADIUS server, would I need to access the control panel and re-configure the WPA2 Enterprise in order for Wi-Fi to work again?
Thanks in advance,
Tyrexionibus

"Full HD 3DD camcorder..." Marketing at it's best.
This is HDV, right? HDV has the same data rate as DV...13.6GB/hour. But because of the MPEG-2 Long GOP format the HDV format employs, it can be a bit tough to edit, but mainly when rendering effects. IT will be slower than DV, and you can't monitor thru the camera like you can with DV, but a simple FW400 drive and Intel Mac will be fine. Better if you can convert to ProRes upon ingest, but then that eats up a LOT more space and requires at least FW800...
http://library.creativecow.net/articles/poisson_chris/hdv-prores.php
Shane

Question about JAX-WS together with EJB 3.0 on WLS 10.3

Hi all,
I am developing a application that it is running on WebLogic 10.3. The application expose EJB 3.0 methods as web services by @WebService & @WebMethod annotation. And my question is,
1. Is there any way to specify the context path/root for those exposed EJB? Currently the contextpath is same as the EJB's name
2. And is there a method to disable the "scanning" of JAX-WS annotation on startup/deployment? The reason behind is that, some of the EJB jar files are coming from other team. I need to deploy it as EJB but not as a web service.
Thanks
Regards,
Rock

Hi guys,
Here is what Eduardo is talking about:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=407022.1
(Doc ID: Note:407022.1)
Rgds,
Fábio.

Question about WLAN Site Surveys with 802.11n APs - 1142s

I do site surveys a little differently that everyone else nowadays, I believe. In the past, I used an autonomous 1230 or 1240, but now I use a lightweight 1142. I configure a port in a room to be on the AP VLAN and I connect my 1142 to the port and hang it where I want - it then gets on the controller and start broadcasting just like the finished product will. This works well except for the time it takes me to configure a port on the switch and the bootup time for the AP. I'm one of the Networks Architects on a campus of almost 200 buildings, so I have access to all the routers and switches and can configure anything I need while onsite.
Now I want to have someone else (in-house) to do our surveys - but this person(s) does not have access to switches and routers, and that won't ever change.
I tried configuring a lightweight 1142 in HREAP mode to handoff to this person, but it appears the power and channel settings don't stick on the 5 GHz side.
Scrapping that idea, I now have to build out an autonomous 1142 for site surveying. I missed out on this step because I went from buying 1242s (can jump between lightweight and autonomous) to 1142s (which didn't have an autonomous image at that time, I believe). This is why I started surveying with lightweight 1142s.
I'm curious if anyone has gone through the configuration of an autonomous 1142 and wouldn't mind sharing their "lessons learned". I haven't seen a matrix of features that are supported/not supported on 1142s when configured for lightweight vs. autonomous.
I currently aim for designing around the 5 GHz radios set to 10 dBm, 20% cell overlap. I also turn on 40 MHz channels in 5 GHz range. This usually ends up with an AP in every other or every third classroom, depending on how old the building is and how many times it has been renovated. I can't "just throw APs out there" since each building is different - some are thin concrete block, some are poured cement, and some are block with metal mesh and stucco. Those usually end up with on AP per classroom.
Does anyone have a matrix on what can and cannot be turned on in an autonomous AP? I would like to get my config as close to the lightweight scenario we deploy for all of our production WLANs.

There is no matrix as to what you're asking for. I've done conversions and configurations of AP's from Lightweight to Autonomous and vice-versa. The configuration of the autonomous AP can be identical to the Lightweight AP from a client perspective.
My current setup has 3 SSID's (VoIP, Data, and Guest) on the autonomous AP. Couple things I do:
1. PoE powered AP through a Tessco power pack.
2. VLANs have to be enabled on the AP (1 for each SSID)
3. The SSID's will have to be created and each AP mapped to a VLAN
4. The SSID's will be need to be enabled on both radios if desired.
The easiest way to configure the AP is to power it with either the power cord.
Console into the AP and let it boot. Assign an IP address to the BVI 1 interface.
Assign an IP address on the wired NIC of our laptop and plug an ethernet cable into the AP's ethernet port.
Configure the AP as listed above via the web gui.
This is by no means a complete answer, but your questions were all over the map.
Regards,
Jerry

GPS question about Michelin x-930 with Navteq maps...

Similar Messages

Maybe you are looking for