GPS simulation from that day
Hi everyone!
Situation : I have a GPS Toolkit for GPS simulation and with Almanacs and Ephemerides files, RF boards and PXI I send a GPS localisation for my A-GPS receiver.
Problématique : For the localisation, it's ok but for the date my receiver update with the date of the Ephemerides files. I don't want that because Ephemerides files are generate with 1 day later and i want the date of to day !
Question : Is it possible to create, generate Ephemerides files with the date i want or edit the date in ??
Thx a lot to read my post and sorry for possible grammatical error.
Flavien
Please share some of your code, so we can see what you're dealing with that what your data looks like. I would assume you could add a numeric value to your timestamps to shift them by 1 day to match what you want.
Similar Messages
-
Hi,
I would like to ask you a question.
a month ago I bought a battery case for iPhone 5 and it worked properly until I installed iOS 7. From that day my iphone is operating normally, BUT when the battery is empty, unfortunately I can not charge additionally my iphone with the "extra battery case".
Does that mean that you did not even create a new software that supports additional battery case or it is something else?
I need your help!!,
Thank you in advance.
Sincerely,
VKThe Mophie Air is a good battery case, but doesn't offer the protection she's looking for. I suggest sticking to the Lifeproof, the iPhone has a very good battery (2-3 days moderate usage for me).
To your 2nd to last paragraph, that is false. Verizon is allowing exisiting customers to keep Unlimited Data - but will lose it once they use a subsidized upgrade. So if you buy a 4S (or LTE device for example) outright, you will keep unlimited data. Mobile hotspot may use up a bit of data, but it is a separate add-on/feature. The new Family Share plans may change that, so it's one giant center of data all devices use. -
i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest
Ebay is not an official reseller. Return it if you can for a refund.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
Good Evening, I would like to know from that day Apple will sell unlocked iPhone 5?
Good Evening, I would like to know from that day Apple will sell unlocked iPhone 5?
There is no such information currently available because Apple is not currently selling unlocked iPhones 5s anywhere. When they announce that information then you will know along with the rest of us users here.
-
please help me to solvere this problem as soon as possible.im waiting for use that again............................
Is your phone unlocked by the french provider? If no, you can't use it with an other provider.
See also http://support.apple.com/kb/HT1937 for more infos about supported carriers for your country. -
We have a GW 7.03 clustered environment running on NW 6.5.7.
All emails from one day on one of our POs has been lost, ie: on the 21st of this month all received, sent, work in progress and calender items for all users on one of our POs were lost.
The only difference between that problematic PO and the other 6 POs, is that its GWCHECK.db became much bigger in size then the other 6 POs one day after the loss! Also the GWCHECK.log at the root of the PO shows several attempts to run scheduled gwcheck jobs with failure: "Failure 'writing' GWCheck database (WpckSetItemStatusByDrn)" in the log.
Subsequent logs from the GWCHECK.log files on subsequent days are normal. I have since re-created the GWCHECk.db and restarted the PO, since then the log is the same size as other POs.
I cannot find any other indication to show me the reason for loosing the emails from that day!
The PO never ran out of space!
Question (s):
1- Could the scheduled task cause email loss based on the above info?
2- If the lost email was never deleted by the users, is there a way to recover those emails form a restore PO location? (knowing that the restore area will show only deleted messages)
3- Will the only solution if the above statement is true is to load the restore PO against an isolated POA while allowing Client/server & Direct access for client connection?
4- Any idea what caused the email loss?
Thank youAfter all: a restore executed - by mistake - to the live environment after midnight on the day of! this made it even harder to detect from the GW aspect, but could be confirmed through our backup system logs. What made the matters even worse; the fact that the nightly backup was running as well!!
The timeline from the Gwcheck logs alligned with the restore logs which also resulted in "bloating" the "NGWCHEK.db" to lamost 30 times as much as normal, since the system went into a loop trying to execute the scheduled maintenance jobs.
Thanks!
Originally Posted by Bob-O-Rama
One thing that will cause all of those symptoms is running out of disk space on the server. But since you are absolutely sure that did not happen, ...
I am not sure if there is a way to accidentally purge a given days mail. What about an accidental restore? The gwchecks might be in response to a failure to access the databases and the PO tried to recover them. Look at the poa and mrs logs and see if you find any database errors being reported.
Has another episode like this happened since? -
Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj KumarHi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
question about app itune, it automatically charge money from my card on Apr/24th, but i have not buy any music or any apps on that day!! what's wrong ??
Please look at your E-Bill and click report a problem.
-
G'day. I am using iMovie 11 and need to clear disk space. How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?
The slightly bigger question is whether you want to move all movie content to the external drive (essentially meaning that drive will always need to be attached when you're working with your videos), or whether you just want to archive older videos off to the external drive.
If you want to move all videos, then just move the 'Movies' folder in your home directory to the external drive, then create an alias of the external 'Movies' back in to your home directory. Now the 'Movies' icon in your home directory will point to the external drive and everything will just work (as long as the external drive is attached when you launch iMovie)
If you want to archive older movies then each Movie should have its own subdirectory within your Movies folder. These can easily be moved off to the external drive, and moved back should you ever need to work on those movies again. -
is there any way i can do that? i have a back up from 2 days ago and i don't have my iCloud sync with my photo
When restoring from the backup, whatever is included with the backup from two days ago should be restored which includes photos/videos in the Camera Roll at the time of the backup along with all other data included with the backup at the time of the backup two days ago.
-
From the day one the response is that (cannot able to determine the location) while using ios5.1 .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?.Which means that is there is any problem in my ipad ? currently running on IOS 6.
Your location is determined from a location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured. The database is built and updated by actually driving around and mapping router locations.
Since you just moved the location of your router has not been updated in the database and when you use Maps you will see your old location.
If you go outside your house you can be correctly located because your iPod sees other routers which are in the location database. Note that you do not need to be connected to a router for your iPod to see it and obtain its MAC address. -
Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation bar appearing rightside height is more than the left side. In reverse manner from the left side. I dnt know whether it is default feature of iphone or not but i am really disappointed due to this. So please anyone help me in this issue and let me clear my doubt and make me happy. Thanks in advance.
I believe what you are seeing is an optical illusion when viewing the screen from the side. Try to align one of the one of the options in Settings, like General, with the navigation bar you'll see it does the same thing.
Hope that helps -
Took a bunch of photos on vacation one day, and it seems like the first batch from one day are not showing up, but then all of a sudden, the ones from the second half of the day are there. They are not showing up on the photostream on my iPhone on which I took the photos, or on my iPad or in iPhoto on my computer. Any idea why this could be happening? All the other photos I took all week showed up on my Photostream.
Is there anyway to force these photos into the photostream?
Thanks! Any help would be appreciated!photo stream uploads photos from your photo app when it is connected to wifi and the photo app has been closed correctly. That may be why your seeing photos pop up on different dates
http://support.apple.com/kb/HT4486 -
I have an old iTunes account that I have forgotten the password and security questions for. I really want the music from that account. What can I do to fix this???
Click here and request assistance.
(86588) -
Outputing Training Simulation from saved project?
First day with Captivate...I've created a combination
demo/training simulation project (as described in the "show me"
tutorial.
What I can't figure out from the help and demo is how to
output the project as training simulation from the same recording
capture?
I'm not finding it documented...it must be really, really
easy. I give, can someone tell me how?
thanks, FennisDemboquote:
Originally posted by:
fennisdembo
quote:
I have a couple follow-on questions based on your reply.
1.) How do I "Open" my saved project as a Training
Simulation? I was able to do as you say and publish my project as a
Demo. When I created it I had also selected Training Simulation,
and when I click into the mode settings, I can see that my choices
are still assigned...but I am not seeing how to publish the
Training Simulation version from the project.Everything I try seems
to result in publishing another demo version.
You simply have to open the Training Simulation that was
generated when you recorded your original screen action. Using the
multiple record modes feature, when you save Adobe Captivate will
create both the demonstration and simulation at the same time.
quote:
2.) You describe moving the Training Simulation interactions
to the demo. Can you give me a few examples of reasons I would do
this? I thought that the demo captures the presentation (Show Me)
of all the steps you perform, and the Training Simulation captures
all of the interactions (Try It). Would the purpose copying from
Simulation to Practice be to sprinkle interactivity into the
presentation, or am I still missing something?
Essentially yes, this enables you to sprinkle interactivity
into the presentation
Here are two examples of when this might be appropriate.
1. Sometimes you might want to automate certain steps that
later on will be practiced by the learner. At first you show the
learner the steps using the mouse pointer and then later on you get
them to try it out for themselves. This approach enables you to
build the learning up at a gentle pace and ensures that you don't
lose them in the details. To be fair you could just branch to the
simulation but sometimes it makes more sense to keep all the
learning in a single file.
2. You are creating some a piece of learning content that
includes steps that you really don't need to simulate. For example
the opening of a certain dialog box, or performing some other basic
operation that you know the learner will be already be very
familiar with.
Note: In the second example sometimes instead of using a
mouse pointer, I will just make the object (such as a panel) appear
by grabbing that image using a screen capture tool, fade it in and
then add a click box so that I can get the learner to perform the
next step which I know will be new to them.
HTH
Regards - Mark
Maybe you are looking for
-
HT202447 Finder frizzes, makes my iMac so slow ...
Since my system was updated automatically installing java 8, Finder frizzes, makes my computer so slow and I have to end up rebooting the computer. Any advise? How can I fix this problems? Thank you
-
QRMidlet reader do not function in E7.
I have bought from Ovi-store 2 times this QR reader, but it do not funcion. Appears tekst Decoding failed ! Please try again. Some other E7 users have same problem.
-
Plugged-in Persistence problem
We are having problem in using imqdbmgr to 'create tbl' to mysql. The error msg said : 'java.sql.SQLException: Syntax error or access violation: You have an error in your SQL syntax near '100),DEST TINYBLOB,primary key(DID))' at line 1' I think it's
-
Going Nutz with my Epson 2200 and Missing icc profie. Pls help
Thanks for looking. Had to reinstall my driver for my epson 2200 and now when I go to print and select the proper paper "luster" I cannot find the selection. I've downloaded the profile again from epson, installed and still cannot select it for print
-
Weblogic Commerce and Personalisation Server
The Company I am working for just purchased both Commerce and personalisation server as they wish to revamp their current website into a modern one. I have a few questions as I have been doing some portal creation with the personlization server. How