Gps stop working during the run

I've purchased my SW3 mainly due to GPS stand alone.
unfortunately it stops work during the run or just about 10 minutes after has started.
I've tried My tracks , Run Keeper IFit outside and all of them happen the same .
could you fix this ?

From XDA
Quote
You need to download Google's My Tracks app and it will sync to your phone. Once you do just go down to my tracks and select run, and once it locks you'll see that location icon in the top left corner of watch showing that it has GPS lock
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Z30 stopped working during 10.2.1 update

My Z30 stopped working during the 10.2.1 update (Fido). The screen is completely dark, the only sign of life is the blinking red light. The pattern is 1 long blink followed by a pause and then 6 quick blinks. I have purchased tech support for 50$ without any resolution. Now on day 4 of issue.
Does anyone have any idea how to get my phone back to life????
Here is what I have tried already:
I tried reloading the OS via bb link. Keep getting a error: "error communicating with device"
I tried reinstalling my bb link and reloading the OS
I tried reloading the OS via online os update
The same things were tried by tech support and no luck there either.
I did all these things with and without sim/micro SD

Try a new USB cable. If doesn't work turn phone off plug into computer with link open and then turn on when plugged in then hit reinstall. Phone sounds like it is bricked. See if this helps.

Microphone not working during the phone calls

Hi dear colleagues,
I've been using my STL100-2 for 3 weeks and suddenly my microphone stopped working during the phone calls.
It is 100% not a hardware problem because voice input works fine.
The microphone works correctly when I turn the speaker on. And when I use the headset as well.
What is wrong there? I tried hard reset, flashed my BB to the latest 10.2 and it didn't solve my problem: the other side could not hear me.b
Please, help me as I cannot do a very simple thing - make calls on my phone without those freaky tricks.
Thank you!

I have a similar problem, I found that it worked ok after I made a Skype call to the phone or if I called the phone from my playbook using video chat it would seem to start working, then it got worse and I found if I squeezed near the mick it would work ok. I also saw another thread where they had similar problems and solutions were possibly linked to loose screws on the plastic casing around the area of the mic as the author suggests it could be an assembly issue. I plan to check mine when I get to work tomorrow as I have no screw drivers small enough on my person right now. Anyway try it you never know it may give you a clue to the problem.
cheers.....

Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine?

Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine? Is this because of some recent software update by Apple? 8x8 support acknowledges issues with no current work-arounds? The 8x8 desktop app worked until early December, then quit. I've deleted and re-downloaded the app, but no difference.

The solution is :
1. Delete iPhone configuration utility. Just drop it to the trash
2. Run
sudo rm -rf /private/var/db/receipts/com.apple.pkg.iPhoneConfigurationUtility.*
rm -rf ~/Library/Preferences/com.apple.iPhoneConfigurationUtility.plist*
3. Delete the whole folder: /System/Library/Extensions/AppleUSBEthernetHost.kext
4. Reinstall iTunes (just over the previous one)
5. Restart
incase of any issues, visit this thread: https://discussions.apple.com/thread/3725328?start=15&tstart=0

HT1349 So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

The latest version of iTunes tends to act up occassionaly. See this support document http://support.apple.com/kb/HT1923 and remove and reinstall iTunes. This will not affect your music library, apps or other content in iTunes. Make sure you follow the steps exactly.
Also, just copying the ringtone will not get it into your phone. iPhone ringtones have an extension of m4r, and you have to first take the Media player file and covert it to an AAC version. From there you need to change the extension from m4a to m4r. If you cannot see file extensions in Windows Explorer, which is actually the default action, go into Organize>Folder and search options, then hit the View tab, and then remove the checkmark by hide file extensions from known file types. After you have created the m4a version and changed the file extension, you can double-click on it and it should show up in the Tones folder in iTunes. From there, sync the phone and it should show up in the list of ringtones.

ITunes has stopped working ...Running Windows 7(64)

I upgraded my home PC Desktop to Windows 7 earlier this year and had no trouble bringing over iTunes from my previous platform (Windows XP).
I recently returned home to the US from a work assignment out of the country and because my iTunes resides on my home PC desktop, I didn't open up iTunes for the past 6 weeks. During this time Apple released iTunes 10.5. When I returned home, the old version of iTunes was still working. However, when I upgraded to iTunes 10.5, iTunes stopped working. The error message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have worked through the following knowlege bulletins (nothing has fixed my problem):
(a)" iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"
(b) "iTunes: Troubleshooting issues with third-party iTunes plug-ins"
(c) "iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio"
(d) "Removing and reinstalling iTunes, QuickTime, and other software components for Windows vista or Windows 7"
(e) "iTunes for Windows: system restarts, blue screen, or quits unexpectedly when accessing iTunes Store"
the last bulletin (e), recommended ensuring that my drivers were up-to-date. So I also updated my drivers.
Lastly, I contacted iTunes Store Customer Support (although my problem isn't with the store, it is upgraded iTunes running on windows 7). They told me the issue was "outside (their) expertise" and recommended I look at this discussion board.
Here is the information I found under Event Viewer:
==================================================================
Log Name:      Application
Source:        Application Error
Date:          11/27/2011 11:46:01 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Theresa-HP
Description:
Faulting application name: iTunes.exe, version: 10.5.1.42, time stamp: 0x4ebf7d7c
Faulting module name: MSVCR80.dll, version: 8.0.50727.6195, time stamp: 0x4dcddbf3
Exception code: 0xc000000d
Fault offset: 0x00026b72
Faulting process id: 0x13b0
Faulting application start time: 0x01ccad3d27f6b2ff
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d 09154e044272b9a\MSVCR80.dll
Report Id: 6ef58025-1930-11e1-a798-e06995d0a503
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-11-27T19:46:01.000000000Z" />
    <EventRecordID>9927</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Theresa-HP</Computer>
    <Security />
</System>
<EventData>
    <Data>iTunes.exe</Data>
    <Data>10.5.1.42</Data>
    <Data>4ebf7d7c</Data>
    <Data>MSVCR80.dll</Data>
    <Data>8.0.50727.6195</Data>
    <Data>4dcddbf3</Data>
    <Data>c000000d</Data>
    <Data>00026b72</Data>
    <Data>13b0</Data>
    <Data>01ccad3d27f6b2ff</Data>
    <Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
    <Data>C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_ none_d09154e044272b9a\MSVCR80.dll</Data>
    <Data>6ef58025-1930-11e1-a798-e06995d0a503</Data>
</EventData>
</Event>
==================================================================
It seems that I am not alone in having this problem! Are there any experts out there who want to earn the undying gratitude of the technically challenged (or a few expert points?)
Thanks for listening,
Theresa
PS - someone recommended uninstalling Apple Quick Time Player. I don't have Quick Time Player.

I had the same problem. I'm using 64bit Windows7. This solution only partially worked for me. I still couldn't connect to the iTunes store.
The following solution worked for me:
COPY    QTMovieWin.dll
FROM    c:\program files (x86)\common files\apple\apple application support\
INTO     c:\program files (x86)/iTunes

Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.

Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.
I have been on the phone multiple times with Verizon, visited multiple stores and still getting different answers with every different person I talk to...
Since the 4.4.2 update, my phone and my wife's phone (14 or 15 month old SIII's) that worked perfect a couple weeks ago no longer know where they are 95% percent of the time... Location cannot be found and GPS satellites cannot be seen (sometimes after searching for 10 - 20 minutes they will lock on).
And it's not just Google maps, it is all apps that need location (ie. gps status and toolbox, weather channel, etc...)
Google maps has us in the right location 50% of the time but i think that has more to do with 4g and wifi (although i always know the weather and traffic conditions in the next town over now).
Navigation will set up fine in Google maps until you actual move the car. Then it updates location every couple minutes, but usually a couple streets over from where I actually am. Maybe 1 out of every four or five times I try it, it will start working about 15 minutes after I started it (then work flawlessly, so it can actually work sometimes). But if you end the process and start over to see if it really "works", back to square one with it not knowing its location all over again...
I obviously did all the normal trouble shooting fixes with the battery and sim card removals and even did a "recommended factory data reset" on my phone with no luck. After this didn't work I stopped by another verizon store yesterday that has "tech services" that I was told could run some sort of diagnostics on my phone. After I showed the tech all the screen shots i have taken of what was happening while driving, he said it is a software problem and a very common one at that.
I was told I should either buy new phones or switch to the edge program where i can get a new phones. These don't seem like very fair solutions to me considering before the 4.4.2 update our phones worked perfect and they are both in almost perfect condition after 14 or 15 months...
Will there be a fix to this??? Is it a Samsung problem??? Should I be contacting them???

If it is 3GS, you can update it to iOS 5 and it will work.

GPS stopped working! (unending "search for location" prompt since Android 5.0.1)

Shortly after getting the Android update my GPS stopped working all together. I have tried everything i could think of. Uninstalled all recent apps, hard reboot, GPS testing app, full phone diagnostic apps, finally COMPLETE phone wipe re-installing everything. Nothing has worked! I am desperate. I use GPS all the time, not a single app, nor the phone itself can get the GPS to get a location fix. No matter what i do, the phone eternally says "Finding Location" for every single GPS using app, diagnostics or otherwise.
It is just a stock Verizon HTC One M8. A brand spanking new one, never dropped, stock verizon/android OS, like literally pristine new! Since the phone is not rooted i have no real way of rolling back to an older Android version correct? I noticed there was only one other post with the same exact symptons posted about 3 months ago that went without any answer/responses since. So... am i SOL? I tried initiating Verizon support on Twitter, but they think its a specific app problem... *sigh*
Any help is greatly appreciated!

I have been trying to troubleshoot with Verizon support via twitter as well. So far I have gotten, to simply turn location off for 12 hours and afterwords see if it works again. This did not work. They said engineers are looking into it. Additionally this was a replacement phone via the HTC advantage program so I assume it is refurbished. I did not use GPS until the 5,0,1 android update coincidentally so I do not know for sure it worked when I got it.
The 2nd link shows the possibility of GPS breakage during the initial teardown of a return. Sadly the other issue is extreme battery drain. A 5 min phone call took 5% power and standby for 2 hours took 30%. No active background apps beyond stock, no auto sync, all devices but 4g data and WiFi turned off.
I think the software is not to blame. Seems HTC sent me an incrediby faulty phone.

Every time I TRY to start firefox 18-19 I get an error message : Firefox has stopped working - close the program and check online for a solution - or - close ..

Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.
I have tried a Clean reinstall but it did not help.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use. I have uninstalled/re installed twice, cleaned system, adjusted Bridge settings with no change. And I have found no helpful troublshooting tips in forum or on web.

Does it freeze with other type of cards. Have seem some post that suggest an imbedded CODEC on the flash card can cause file corruption in Bridge and Mac Finder.
To access the crash log it is officially called the event log. To access us OS Help.

ITunes stops working. The message says iTunes has stopped working due a problem to the program. How do I find a solution?

iTunes stops working. The message says iTunes has stopped working due a problem to the program. How do I find a solution?

Hey there Warrior41,
it sounds like you are unable to use iTunes because it either will not launch without this error, or you get the error when you are using it. Sorry to hear about that, that can be pretty aggravating. I would use the troubleshooting in the following article to help resolve the issue, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with opening iTunes in Safe Mode and see if the issue persists. If not, the article will help you troubleshoot for 3rd party plugins that may be causing it:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
If that doesn't resolve the issue there are additional steps in the article if needed.
Thank you for using Apple Support Communities.
Regards,
Sterling

HT1600 My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

Welcome to the Apple Community Turbomedic.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Intercompant STO working during MRP run.

Dear Experts,
How intercompany stock transfer works during MRP run?
I mean if one company is purchaser and other is vendor and purchaser company's planned delivery time is 10 days and replenishment time in other company is 3 day then will system consider these two times in creating purchase requisition in first plant ( in MD04)?
Regards
Deepak Sharma
9818263889

Hi,
Say your purchaser is plant A, vendor is plant B. STO can make by spl.procurement key 40 in MRP2 view in plant A.
If you create requirement in plant A, system will create planed order for that material.In plant A, system will consider only planned delivery time of 10 days.
In plant B, system will create dep requirement. suppose if stock is not available that time system will consider to replinishment the material as 3 days.
This 3 days will not consider in Plant A.
Regards,
Dharma

HP G4050 "HP Scan Resources has stopped working" and the program closes

Scanning photo negatives, and all was working well until I updated the HP software.
RUnning on an HP laptop, 64 bit, Win 8.1 64 bit, most current version of scanner software (is there no way on the software to find the version no.? I deleted the download after installing)
Have rebooted the machine. Closed the scanner, turned off/on, reinstalled software and all combinations of these three.
load the negs. preview. rotate, crop, click "finish". It scans the first neg, gets 95% of the way (according to the work bar progress), throws up a message:
"HP Scan Resources has stopped working" Close the program. On the close screen it suggests the above 3 retrys, and gives the "extended error info" as :
8,[(4,0,-2147023170)] I presume that may mean something to someone.
Am about 1/2 way through scanning 5,000 negatives, and this has cropped up. Bizarre, as the laptop has not changed from the get-go (new HP laptop). WhaddaIdo?

Hello WRJP, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into scan issues. I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Gps stop working during the run

Similar Messages

Maybe you are looking for