GPS test always fails.
I don't know if I have to post this but in my device testing GPS always fails through service menu as well as diagnostic app. However in map, location and navigation works fine. I have tried few workarounds but it's always the same.
P.S. I have read somewhere that there is a test for battery in service menu but for me there is no such option. Z1C lollipop.
It can't say for sure but it's possible. It works fine (both diagnostics and service menu) when i test it here so it seems there's something in your phone causing it.
You could try doing a repair of the phones software in PC Companion and see if it helps but it it's causes by the missing DRM-keys it will not help. But if the GPS works in other apps it's perhaps not something you need to fix?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
Similar Messages
-
First flexunit test is always failing with Error Error #1009: Cannot access a property or method of
Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
[flexunit] Setting up server process ...
[flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Client connected.
[flexunit] Setting inbound buffer size to [262144] bytes.
[flexunit] Receiving data ...
[flexunit] Sending acknowledgement to player to start sending test data ...
[flexunit]
[flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
[flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
[flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
[flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
[flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
[flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
[flexunit] at org.flexunit.listeners::CIListener/dataHandler()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
[flexunit] <endOfTestRun/>
[flexunit] Analyzing reports ...
[flexunit]
[flexunit] Suite: Tests.Classes.DummyASyncTest
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
[flexunit] Results :
[flexunit]
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
BUILD FAILED
/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.Main.runBuild(Main.java:809)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something.Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
[flexunit] Setting up server process ...
[flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Client connected.
[flexunit] Setting inbound buffer size to [262144] bytes.
[flexunit] Receiving data ...
[flexunit] Sending acknowledgement to player to start sending test data ...
[flexunit]
[flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
[flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
[flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
[flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
[flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
[flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
[flexunit] at org.flexunit.listeners::CIListener/dataHandler()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
[flexunit] <endOfTestRun/>
[flexunit] Analyzing reports ...
[flexunit]
[flexunit] Suite: Tests.Classes.DummyASyncTest
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
[flexunit] Results :
[flexunit]
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
BUILD FAILED
/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.Main.runBuild(Main.java:809)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something. -
people often can't reach me. To check this I have tried the Skype test call - it always fails. But it works on my Ipad. what can be wrong on my Iphone but not my Ipad?
ThanksThis became a problem when Call Library Nodes got error terminals (and optional path terminals) in LabVIEW 8.20. I should be able to get a fix in to VI Analyzer Toolkit 2010.
Thanks for taking the time to report the bug.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
My Download always fails.Nokia Ovi Player
my download always fails. i can browse Ovi Music but when i click on download and i buy it my download fails.always.
please help.Hi Richcss,
Many thanks for your comments and suggestions.
I last successfully downloaded music (to my home PC) with OVI Player v2.0.50727 on 4 April 2010 when I managed to download 12 songs in one evening. Nothing has changed since then (with regard to my DSL line speed, Internet service Provider, OVI Player version, router firewall settings, anti-virus software etc etc.), except the fact that I cannot download music without getting the frustrating "Download Failed" message.
I have sent my ISP traceroutes from my home router to music.nokia.co.za to see if they can help identify a bottleneck in my DSL connection to the Net which may be the cause of a lengthy timeout (in one or more of the hops) that could result in the failed download. I tried a traceroute to music.nokia.co.za when my home PC connects via 3G, but unfortunately my cellphone provider blocks traceroute calls.
Today, I tried to download songs at work (through a corporate firewall and proxy server) using Nokia Music v1.2.20226. The app wanted to update to the latest OVI Player version which I ignored. I successfully downloaded one new song.
This is the first time I tried downloading a song using my employer's Net connection, as I prefer using my home PC for such "non-work" related tasks. I then upgraded Nokia Music to OVI Player (v2.1.10304), restarted my work PC, configured the proxy settings (corporate proxy) and managed to successfully download a new song. I tried a traceroute to music.nokia.co.za from my work PC, but unfortunately our corporate firewall blocks traceroute calls.
The only conclusion I can draw from these tests is that the fault lies with my Internet Service Provider for my home DSL connection. I will contact them again for advice. -
Patching Always Fails on One WS Type
Since I've implemented Patch Management in my organization I've cycled through several different workstation types, but recently I'm having trouble with this past year's computer model in that patching always fails.
What is happening is that I have narrowed the patching down to doing the individual machines (HP dc7900). I'll select the patches I want to push go through the wizard using default settings and force the restart. The deployment process will go successfully but the install/launches will fail.
In the reporting I'll get a remediate.exe failure with a Windows error: Unknown error (0xffffffff) on the bundle package. On the workstation I'll get notification messages for every patch in the bundle. Overall ZCM status reporting says that the package was successfully deployed but in actuality absolutely zero updates are applied.
This happens the same for every dc7900 in our building which were set up using the same process as dc5700 and two generations of dc5800 workstations that all patch successfully. Has anyone run into a similar situation? Thanks!We make a new "source image" for each computer model that we have so different base images for the 5700, 5800 and 7900. All of our images are made with the same XP SP3 volume license and network deployed apps installed. The 57/5800 systems had Windows Updates enabled as "download and let me choose when to install" but with the 7900 we thought that we would be able to use Patch Management to deploy updates so on the image the updates were turned off, but we have since manually turned them back on to automatic to make sure they keep updating.
I did recently find out that this behavior also follows application bundles on these systems now. I usually deploy bundles as dynamic administrator but have read in another thread that deploying as system may cause less hassles but I haven't had a chance to test this yet. -
.ipa from builder V28 always failed to install
Hi,
I have problem to Install my reader on my testing iPad with OS6 & OS7,
i already build my reader form Adobe DPS V28, and download the .ipa with my developer certificate, and before i submitted to appstore i want to try to testing, but everytime i try to Install and sync to my ipad it always failed, did i do something wrong when i build the reader?
Thank YouDoes the mobileprovision file you used include the iPad's UDID? If not, you can't install the app on that device.
-
Log In User always fails even when i know that the mysql database is registering the login informati
ok here is my issue. im setting up a login page for my site. i have my other pages restriced to access without the session validated. i register a test user and when i input the info into the correct fields it redirects back on itself and says accessdenied. i know the registration page is updating my mysql tables but it wont let me log in. also right after i create the server side behaviour i get a syntax error on line 2 and exclamation points next to Log In User plus log in user shows up twice in the behaviours panel. below is the form and php script
<?php
@@UrlFormat@@('Connections/tonyreaper.php');
// *** Start the session
session_start();
// *** Validate request to log in to this site.
$FF_LoginAction = $PHP_SELF;
if (isset($QUERY_STRING) && $QUERY_STRING!="") $FF_LoginAction .= "?".$QUERY_STRING;
if (isset($user_name)) {
$FF_valUsername=$user_name;
$FF_fldUserAuthorization="";
$FF_redirectLoginSuccess="index.php";
$FF_redirectLoginFailed="login.php";
$FF_rsUser_Source="SELECT user_name, password ";
if ($FF_fldUserAuthorization != "") $FF_rsUser_Source .= "," . $FF_fldUserAuthorization;
$FF_rsUser_Source .= " FROM users WHERE user_name='" . $FF_valUsername . "' AND password='" . $password . "'";
mysql_select_db($database_tonyreaper, $tonyreaper);
$FF_rsUser=mysql_query($FF_rsUser_Source, $tonyreaper) or die(mysql_error());
$row_FF_rsUser = mysql_fetch_assoc($FF_rsUser);
if(mysql_num_rows($FF_rsUser) > 0) {
// username and password match - this is a valid user
$MM_Username=$FF_valUsername;
session_register("MM_Username");
if ($FF_fldUserAuthorization != "") {
$MM_UserAuthorization=$row_FF_rsUser[$FF_fldUserAuthorization];
} else {
$MM_UserAuthorization="";
session_register("MM_UserAuthorization");
if (isset($accessdenied) && false) {
$FF_redirectLoginSuccess = $accessdenied;
mysql_free_result($FF_rsUser);
session_register("FF_login_failed");
$FF_login_failed = false;
header ("Location: $FF_redirectLoginSuccess");
exit;
mysql_free_result($FF_rsUser);
session_register("FF_login_failed");
$FF_login_failed = true;
header ("Location: $FF_redirectLoginFailed");
exit;
?>
<form action="<?php echo $FF_LoginAction?>" id="form1" name="form1" method="POST">
<p> </p>
<table width="200" border="0">
<tr>
<td>Username:</td>
<td><label for="user_name"></label>
<input type="text" name="user_name" id="user_name" /></td>
</tr>
<tr>
<td>Password:</td>
<td><span id="sprypassword1">
<label for="password"></label>
<input type="password" name="password" id="password" />
<span class="passwordRequiredMsg">A value is required.</span><span class="passwordInvalidStrengthMsg">The password must have at least 5 letters and 1 number.</span></span></td>
</tr>
<tr>
<td> </td>
<td><input type="submit" name="submit" id="submit" value="Log In" /></td>
</tr>
</table>
<p> </p>
</form>
im really trying to get this fixed but i am at an utter lossThe $user_name has not been set, thus the login will always fail.
Have a look this example http://forums.adobe.com/message/3795422#3795422 where I have used
if (isset($_POST['user_name'])) {
Gramps -
Initial content installation always fails
I have mountain lion 10.8.5 and recently updated safari to 6.1. After that, I bought/installed Logic Pro X. The initial software install went through fine, and then when I open the program for the first time, it downloads 2 GB of initial content. After the download, I am prompted for teh admin password, and the installation continues, but always fails with "the content download could not be completed". I have tried this several times over the past few days, same result every time.
Has anyone seen this issue, and is there a solution?Yes.. there are several possible reasons for this..
The common ones are;
Your System disk has a permissions/disk error on it.. try repairing permissions and also use the disk utility to check and repair your system disk if needed..
Make sure your Mac does not go to sleep during the process... Change the settings in System Preferences/Energy Saving to prevent this from happening, temporarily...
Boot your Mac up in Safe Mode.... and try again.
http://support.apple.com/kb/HT1455
Finally you will find a thread here which contains lots of useful info on resolving this issue... (Including some of the above)
If none of these fixes things for you then you may have to contact Apple directly and ask them to help you troubleshoot.. Remember, when you purchased Logic Pro X you got 90 days of free Applecare support for LPX so make use of it if needed
http://www.apple.com/contact/
Additional suggestion/possibiity
This is not exactly common but I have come across it more often than one would think these days... and it is one that can often be overlooked...
Your ISP doesn't allow you to download a single file larger than a certain size... Typically the Max File Size Limit is set to 2GB or in a few cases less... which can then result in the issue you are having... Call your ISP to confirm/check or find a single, larger than say 2.5GB, file on the net somewhere that you can download and test.. -
Find All Occurrences always fails within loop
Dear forumers,
There's this strange problem that requires a fix.
Finding all occurences of '#' works fine here:-
REPORT zz_test.
DATA: lv_text TYPE string,
ls_result TYPE match_result,
et_release type table of yytc_release,
lt_result TYPE match_result_tab.
lv_text = '"RFC-1234#Create ""Payroll"" under NL directory"'.
FIND ALL OCCURRENCES OF REGEX '#'
IN lv_text
RESULTS lt_result IGNORING CASE IN CHARACTER MODE.
IF sy-subrc = 0. " SY-SUBRC is always 0
READ TABLE lt_result INTO ls_result INDEX 1.
WRITE :'Offset: ' .
WRITE: ls_result-offset .
WRITE: lv_text+00(ls_result-offset).
ENDIF.
But it always fails here, within a loop at an internal table:-
SELECT * .... INTO TABLE it_jira ...
LOOP AT it_jira ASSIGNING <jira>.
<release>-summary = <jira>-summary.
IF <release>-type CS 'Subtask'.
" <release>-summary is of data type CHAR255
PERFORM get_subtask USING <release>-summary.
ENDIF.
ENDLOOP.
FORM get_subtask USING pv_summary TYPE yytc_release-summary.
DATA:
lv_string TYPE char255,
lv_final TYPE char255,
lv_summary TYPE string,
lv_strlen TYPE i,
lt_result TYPE match_result_tab.
lv_string = pv_summary. " LV_STRING = '"RFC-1234#Create ""Payroll"" under NL directory"''
CONDENSE lv_string.
lv_strlen = STRLEN( lv_string ).
lv_strlen = lv_strlen - 1.
IF lv_string+0(1) = '"' AND lv_string+lv_strlen(1) = '"'.
lv_strlen = lv_strlen - 1.
WRITE lv_string+1(lv_strlen) TO lv_final+1(254).
ENDIF.
lv_summary = lv_final.
" FIND ALL OCCURRENCES OF '#'
" IN lv_summary
" RESULTS lt_result IGNORING CASE. * SY-SUBRC is always 4 here too
FIND ALL OCCURRENCES OF REGEX '#'
IN lv_summary
RESULTS lt_result IGNORING CASE IN CHARACTER MODE.
IF sy-subrc = 0. " SY-SUBRC is always 4 here - why?! :(
ENDIF.
CLEAR: lv_string,
lt_result.
ENDFORM. " GET_SUBTASK
Only when the string LV_SUMMARY is edited from within the debugger (add space to the string prefix, etc), the SY-SUBRC will be 0 and there'll be data found in LT_RESULT.
How can I resolve this issue? Please do help. Thanks.I think the subtle difference is that in your first example the character is actually '#' whereas in the second example it is actually another (unprintable)value such-as line-feed and only APPEARS to be '#'.
You must find out what the value in question is(will it always be the same value?) and then replace that instead of '#'. -
im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....
Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com -
System Image Utility always fails, why?
Hi everyone,
on my clean and fresh install of 10.7.4 Server the System Image Utility always fails to create an image. I want to create a NetInstall image and have put the OS X Lion Installer in /Applications. I can select it in SIU and choose to create a NetInstall image. It asks for the admin pw and always presents an error at the very end: Image creation failed. An unknown error has occured.
If I select to create a NetBoot image instead it fails directly after clicking on the Create button with this slightly different message: Image creation failed. An error has occured. At least it’s no unknown error…
Any ideas what might be causing this? I have succesfully created NetInstall images with 10.6 Server and 10.8 Server, but 10.7 Server somehow won’t play nice.
Thanks
BjörnHi Brian,
I first deleted the Installer and redownloaded it from the App Store, just to make sure there was no problem with it. Even though I now have the 10.7.4 Installer (had 10.7.0 before) nothing has changed. I then went on to set the log level as suggested. I now get different errors based on the chosen log level.
Log level set to debug:
Image creation failed.
*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
Log level set to verbose:
Image creation failed.
An unknown error has occurred.
I did not see anything helpful in the logs unfortunately. The only noticeable thing mentioned was: Failed to create image from installer media.
Any additional ideas? I will attach both logs here, just in case.
VERBOSE LOG:
Starting image creation.
Workflow Started (2012-09-08 14:08:00 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
Attaching disk image
Copying /Volumes/Mac OS X Install ESD
Preparing the kernel and boot loader for the boot image
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386/x86_64
Copying /Volumes/Mac OS X Install ESD/boot.efi
Copying /Volumes/Mac OS X Install ESD/System/Library/CoreServices/PlatformSupport.plist
Performing post install cleanup
Detaching disk image
"disk4" unmounted.
"disk4" ejected.
Correcting permissions. 501:20 /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Script is done.
Failed to create image from installer media.
An unknown error has occurred.
NetInstall creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.
DEBUG LOG:
Starting image creation.
Workflow Started (2012-09-08 13:59:22 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
progressPrefix="_progress"
++ progressPrefix=_progress
scriptsDebugKey="DEBUG"
++ scriptsDebugKey=DEBUG
imageIsUDIFKey="1"
++ imageIsUDIFKey=1
mountPoint=""
++ mountPoint=
ownershipInfoKey="501:20"
++ ownershipInfoKey=501:20
destVolFSType="HFS+"
++ destVolFSType=HFS+
installSource="/Volumes/Mac OS X Install ESD"
++ installSource='/Volumes/Mac OS X Install ESD'
dmgTarget="NetInstall"
++ dmgTarget=NetInstall
destPath="/Users/vm/Desktop/NetInstall of Install Mac OS X Lion"
++ destPath='/Users/vm/Desktop/NetInstall of Install Mac OS X Lion'
dmgVolName="NetInstall"
++ dmgVolName=NetInstall
. "${1}/createCommon.sh"
+ . /tmp/niutemp.Yv8Z6Mqx/createCommon.sh
# createCommon.sh
# Common functionality for the Image creation process.
# sourced in by the various SIU scripts
# Copyright © 2007-2011 Apple Inc. All rights reserved.
# Using dscl, create a user account
AddLocalUser()
# $1 volume whose local node database to modify
# $2 long name
# $3 short name
# $4 isAdminUser key
# $5 password data
# $6 password hint
# $7 user picture path
# $8 Language string
local databasePath="/Local/Default/Users/${3}"
local targetVol="${1}"
# Find a free UID between 501 and 599
for ((i=501; i<600; i++)); do
output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
# If there is already an account dscl returns it, so we're looking for an empty return value.
if [ "$output" == "" ]; then
break
fi
done
# Create the user record
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
if [ $? != 0 ]; then
echo "Failed to create '${databasePath}'."
return 1
fi
# Add long name
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
if [ $? != 0 ]; then
echo "Failed to set the RealName."
return 1
fi
# Add PrimaryGroupID
if [ "${4}" == 1 ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80
else
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
fi
if [ $? != 0 ]; then
echo "Failed to set the PrimaryGroupID."
return 1
fi
# Add UniqueID
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
if [ $? != 0 ]; then
echo "Failed to set the UniqueID."
return 1
fi
# Add Home Directory entry
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
if [ $? != 0 ]; then
echo "Failed to set the NFSHomeDirectory."
fi
if [ "${6}" != "" ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
if [ $? != 0 ]; then
echo "Failed to set the AuthenticationHint."
return 1
fi
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
if [ $? != 0 ]; then
echo "Failed to set the picture."
return 1
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
if [ $? != 0 ]; then
echo "Failed to set the passwd."
return 1
fi
# Add shell
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
if [ $? != 0 ]; then
echo "Failed to set the UserShell."
return 1
fi
# Create Home directory
if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
/usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
else
/usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
fi
if [ $? != 0 ]; then
echo "Failed to copy the User Template."
return 1
fi
/usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
if [ $? != 0 ]; then
echo "Failed to set ownership on the User folder."
return 1
fi
# Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
CopyEntriesFromFileToPath()
local theFile="$1"
local theDest="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
/usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
CopyPackagesWithDestinationsFromFile()
local theFile="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
read SUB_PATH
/usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Create an installer package in ${1} wrapping the supplied script ${2}
CreateInstallPackageForScript()
local tempDir="$1"
local scriptPath="$2"
local scriptName=`basename "${scriptPath}"`
local entryDir=`pwd`
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Create installer for script ${scriptName}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# shouldn't exist on entry...
if [ -e "${tempDir}/emptyDir" ]; then
/bin/rm -rf "${tempDir}/emptyDir"
fi
# make some directories to work in
/bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
/bin/mkdir $opt "${tempDir}/emptyDir" || return 1
# Create Archive.pax.gz
cd "${tempDir}/emptyDir"
/bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
/usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
cd "${entryDir}"
# Create the Archive.bom file
/usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
# Create the Info.plist
/bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.server.SystemImageUtility.${scriptName}</string>
<key>CFBundleShortVersionString</key>
<string>1</string>
<key>IFMajorVersion</key>
<integer>1</integer>
<key>IFMinorVersion</key>
<integer>0</integer>
<key>IFPkgFlagDefaultLocation</key>
<string>/tmp</string>
<key>IFPkgFlagInstallFat</key>
<false/>
<key>IFPkgFlagIsRequired</key>
<false/>
<key>IFPkgFormatVersion</key>
<real>0.10000000149011612</real>
</dict>
</plist>
END
echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
# Copy the script
/bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
# clean up
/bin/rm -r "${tempDir}/emptyDir"
return 0
# Validate or create the requested directory
CreateOrValidatePath()
local targetDir="$1"
if [ ! -d "${targetDir}" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Creating working path at ${targetDir}"
fi
/bin/mkdir -p "${targetDir}" || return 1
fi
# If any exist, apply any user accounts
CreateUserAccounts()
# $1 volume whose local node database to modify
local count="${#userFullName[*]}"
local targetVol="${1}"
if [ $count -gt 0 ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding $count user account(s) to the image"
fi
for ((index=0; index<$count; index++)); do
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding user ${userFullName[$index]}"
fi
#lay down user here
AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
if [ $? != 0 ]; then
echo "Failed to create the User '${userUnixName[$index]}'."
return 1
fi
done
# "touch"
/usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
/usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
fi
# retry the hdiutil detach until we either time out or it succeeds
retry_hdiutil_detach()
local mount_point="${1}"
local tries=0
local forceAt=0
local limit=24
local opt=""
forceAt=$(($limit - 1))
while [ $tries -lt $limit ]; do
tries=$(( tries + 1 ))
/bin/sleep 5
echo "Attempting to detach the disk image again..."
/usr/bin/hdiutil detach "${mount_point}" $opt
if [ $? -ne 0 ]; then
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${mount_point}"
fi
if [ $tries -eq $forceAt ]; then
echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
opt="-force"
fi
if [ $tries -eq $limit ]; then
echo "Failed to detach disk image at '${mount_point}'."
exit 1
fi
else
tries=$limit
fi
done
# Create the dyld shared cache files
DetachAndRemoveMount()
local theMount="${1}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Detaching disk image"
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${theMount}"
fi
fi
# Finally detach the image and dispose the mountPoint directory
/usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
fi
return 0
# If any exist, install configuration profiles to the install image
InstallConfigurationProfiles()
local tempDir="${1}"
local targetVol="${2}"
local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/configProfiles.txt" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Configuration Profiles"
fi
/bin/mkdir -p "${profilesDir}/Setup" || return 1
# Make sure the perms are correct
/usr/sbin/chown root:wheel "${profilesDir}"
/bin/chmod 755 "${profilesDir}"
/usr/sbin/chown root:wheel "${profilesDir}/Setup"
/bin/chmod 755 "${profilesDir}/Setup"
/usr/bin/touch "${profilesDir}/.profilesAreInstalled"
CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
# Enable MCX debugging
if [ 1 == 1 ]; then
if [ -e "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
/usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
/usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
fi
# Converts a list of scripts (full paths contained in the file at $1) into packages in $3
InstallScriptsFromFile()
local tempDir="${1}"
local theFile="${2}"
local targetDir="${3}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Converting scripts into install packages"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
# make an installer package out of the script
CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
# copy the resulting package to the Packages directory
local leafName=`basename "${FILE}"`
/usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
# clean up
/bin/rm -r "${tempDir}/${leafName}.pkg"
fi
done < "${theFile}"
return 0
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PostFlightDestination()
local tempDir="${1}"
local destDir="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Performing post install cleanup"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
# delete the DS indices to force reindexing...
if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
/bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
fi
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
if [ $? != 0 ]; then
echo "Failed to detach and clean up the mount at '${mountPoint}'."
return 1
fi
echo "Correcting permissions. ${ownershipInfoKey} $destDir"
/usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PreCleanSource()
local srcVol="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Removing swapfiles on $1"
fi
/bin/rm $opt "$srcVol/private/var/vm/swapfile*"
fi
if [ -d "$srcVol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for t /bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexmountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
errExit()
echo "Execution of '`basename ${0}`' failed. Cleaning up."
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
/bin/rm -r "${destPath}"
exit 1
# Set up for script debugging
debug_opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
debug_opt="-v"
fi
# Prepare the destination
CreateOrValidatePath "$destPath" || errExit
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for tPERCENT:0.000000
PERCENT:4.332841
PERCENT:8.985722
PERCENT:12.358444
PERCENT:14.524864
PERCENT:16.617430
PERCENT:19.522402
PERCENT:21.614967
PERCENT:23.535204
PERCENT:26.070902
PERCENT:29.271296
PERCENT:33.111767
PERCENT:38.847858
PERCENT:42.343674
PERCENT:44.707043
PERCENT:46.578041
PERCENT:49.138355
PERCENT:51.772526
PERCENT:55.563763
PERCENT:58.567207
PERCENT:62.210735
PERCENT:64.795670
PERCENT:69.719353
PERCENT:74.741508
PERCENT:77.055641
PERCENT:79.591331
PERCENT:83.013290
PERCENT:85.548988
PERCENT:88.010834
PERCENT:91.728210
PERCENT:97.710487
PERCENT:100.000000
PERCENT:-1.000000
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libex
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
rrExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
tDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
Stopping image creation.
Terminating script!
Image creation failed. -
Always fail to deploy to server when (Create a Simple EJB Session Bean )
Hi,
I'm trying the "Oracle JDeveloper 11g Tutorials" - "Create a Simple EJB Session Bean", I just follow the instructions in that page. But when I tried to run it, it always failed. Can anyone help me to have a look. I paste the log below. thank you.
There's an error in the log "java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener". but I don't know what's that meaning.
E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;e:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;e:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;e:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;E:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;e:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;e:\Oracle\MIDDLE~1\JDK160~1\jre\bin;e:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\D\JACKYH\Installed\apache-ant-1.7.1\bin;C:\Program Files\TortoiseSVN\bin;C:\Program Files\CollabNet Subversion;U:.;V:.;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
e:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<12/11/2008 10:54:31 AM EST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
E:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<12/11/2008 10:54:32 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<12/11/2008 10:54:32 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<12/11/2008 10:54:33 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<12/11/2008 10:54:33 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<12/11/2008 10:54:34 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<12/11/2008 10:54:36 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<12/11/2008 10:54:38 AM EST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<12/11/2008 10:54:38 AM EST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<12/11/2008 10:54:39 AM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<12/11/2008 10:54:39 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<12/11/2008 10:54:39 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.12.54:7101 for protocols iiop, t3, ldap, snmp, http.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<12/11/2008 10:54:39 AM EST> <Warning> <Server> <BEA-002611> <Hostname "jackyh.dst.com.au", maps to multiple IP addresses: 192.168.12.54, 127.0.0.1>
<12/11/2008 10:54:39 AM EST> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 192.168.12.54, 127.0.0.1>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 13829 ms.
DefaultServer started.
[Running application SessionEJB on Server Instance DefaultServer...]
---- Deployment started. ---- 12/11/2008 10:54:43
Target platform is (Weblogic 10.3).
Running dependency analysis...
2008-11-12 10:54:43.882: Writing EJB JAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB\SessionEJB-Project1-ejb
2008-11-12 10:54:43.914: Wrote EJB JAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB\SessionEJB-Project1-ejb
2008-11-12 10:54:44.148: Writing EAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB
2008-11-12 10:54:44.164: Wrote EAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB
Deploying Application...
<12/11/2008 10:54:46 AM EST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1226447686226' for task '0'. Error is: 'weblogic.management.DeploymentException: '
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
<12/11/2008 10:54:46 AM EST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SessionEJB'.>
<12/11/2008 10:54:46 AM EST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application SessionEJB on DefaultServer.: .
weblogic.management.DeploymentException:
#### Deployment incomplete. #### 12/11/2008 10:54:46
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$4$1.run(AdrsStarter.java:1316)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
... 12 more
#### Cannot run application SessionEJB due to error deploying to DefaultServer.
[Application SessionEJB stopped and undeployed from Server Instance DefaultServer]Steve,
I'm facing the same issue as user#####.
Your workaround does not work ; when I deploy manuelly the ear file, with a new weblogic-application.xml, I get the same error.
Does that happen a lot ? :p
Edit :
my web.xml :
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<description>Empty web.xml file for Web Application</description>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<context-param>
<description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
<param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
<param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
<param-value>false</param-value>
</context-param>
<filter>
<filter-name>JpsFilter</filter-name>
<filter-class>oracle.security.jps.ee.http.JpsFilter</filter-class>
</filter>
<filter>
<filter-name>trinidad</filter-name>
<filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
<filter-name>adfBindings</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>JpsFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>trinidad</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
</web-app>Luc-
Edited by: Lucas Ismag on 4 déc. 2008 05:33 -
Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it. -
My gps is not working. I cannot use turn-by-turn navigation in google maps. I downloaded a GPS test app and it showed my phone is not locking on any satellites. How can I correct this?
We certainly want to make sure you get the most out of the GPS, wplaxico! Was this tested primarily outdoors? When did this begin? Any other recent apps of updates installed when this started?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Trying to install Camera Raw 6.7 for a Cannon EosX, always fails.
Hello,
I am trying to install the Camera Raw 6.7 update for a Cannon EosX on a Mac, it always fails during the install saying that the administrator is suppressing the update. I am logged into the administrative account on this computer, and can not figure out what is preventing the install from going through.
The laptop is an OS 10.8.5 Mac, using Potoshop CS5.
Has anyone run into this? Any solutions out there?try a manual update, http://www.adobe.com/downloads/updates/
Maybe you are looking for
-
Numeric overflow with DBMS_CDC_PUBLISH.CREATE_CHANGE_TABLE
Hello all- I'm running Oracle 9i on WinXP sp. 2. I'm trying to create a CDC table with the standard SYS package and am getting a numeric overflow error. The code I'm attempting to execute is this: BEGIN sys.dbms_cdc_publish.create_change_table( OWNER
-
ADD to a selection without deselecting existing selections?
I've searched for a while and I haven't found anything about this...I can't fathom that I'm the only one who's ever wanted to know this, but oh well... 1.) You've got a large clustered group of 100 small shapes, and you've selected the 2/3 of them on
-
Older emails are no longer readable. The subject header is there, but email content is blank (white). Interestingly, if I search for a keyword it will find the keyword within 'blank' messages, suggesting that the data is still there, just hidden in s
-
How to call report through URL(without displaying userid info) ?
I want to call report in my APEX application. I can get it run like this : http://hostname:port/reports/rwservlet?module=invoice.rdf&userid=oe/oe@tnsalias&destype=cache&desformat=pdf But showing the userid in the url would have serious security probl
-
Diagnostics system Advanced setup error
Hi all, I am configuring solman diagnostics. My system level is Solman 7.0 SPS 16. I have executed Diagnostics system setup wizard and all taskes executed sucessfully. OS is windows 2003 Server and Java 2 SE 1.4.12 version is installed in the server