GPS Use - How do I get around the security

I have two projects. Both don't work due to security restrictions.
One is the media for midi use.
The other uses the GPS in my phone.
This is strictly for personal use.
How do I get around this? Any help would be nice.

As far as I know, the only way to go around security restrictions is to have you application sigend by Verisign, Thawte, JavaVerified, etc.
Marc

Similar Messages

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login.

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.

You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support or OS X: Changing or resetting an account password - Apple Support
Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast.

How do i get around the A12E1 error for installing application mgr

how do I get around the A12E1 error

Which operating system are you using? Do you have any other Adobe Creative software installed?

How do I get around the "Master Password" window?

Since I'm the only user at this sight, I don't think that I need a Master Password.
So How do I get around the "Master Password" window so I can get some work done?
The Box is not marked, but setup still refuses to go any further.

Hi warp4dennis,
Thank you for your question, I understand that you would like to get around the master password dialogue. [[Master Password]] specifically [https://support.mozilla.org/en-US/kb/use-master-password-protect-stored-logins#w_removing-the-master-password how to remove it]
I hope this helps!

How do i get past the security questions

How do I get past the security questions when I never set them up

James ..
You need to contact Apple directly > Contacting Apple for support and service

HT1212 my ipad asks for a passcode but I never entered a passcode. this happened after the ipad battery went dead and i recharged.how do i get around the passocde prompt?

My ipad battery went dead and after recharging and booting up the ipad, it is asking for a passcode. however, no one remembers ever entering a passcode in to this ipad, isnce it used by everyone in the house. how do i get around this passocde prompt?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Using table partioning to get around the Linux ULIMIT

Is this recommended? Or would it defeat the purpose of
partioning.
null

Bob Tribit (guest) wrote:
: Is this recommended? Or would it defeat the purpose of
: partioning.
In what particular way are you trying to get around the 2Gb
filesize limit on 32-bit platforms?
Tablespaces can be made of many separate files, and a table's
extents can be spread in any pattern through a
tablespace. Although it's not particularly neat to have a 10Gb
tablespace made of 5 different files, it's not exactly difficult
to deal with.
Or do you want to import/export your data in neatly-sized
chunks? Suck in 2Gb chunks and exchange them into a partitioned
tabled?
Be aware at, under 8.0 at least, partitioning is a cost-option
(adding roughtly 1/3 to the cost of your base per-user license).
You need to have a good reason to use it.
Romours suggest that it's back to being a complementary feature
in 8i.
null

When I try to back up my hard drive to an external hard drive if an alias is not correct or a file is not recognised it fails and I cannot tell the sytem to ignore the file. Anyone know why and how I can get around the problem?

Hi
I have a Mac PowerBook G4 running OSX and a Hitachi external HD. When I try to back up the data from my Mac to the HD it copies much of the data across but some files such as incorrect "alias' files and some other files do not copy. The messages I get indicate there are problems but when I click the OK button the backup stops. I then have to either delete these files or copy other files with correct alias details to overwrite the existing one. I then have to start the backup all over.
I have been carrying out a bfull backup so have been copyiing the hard drive of the Mac an pasting it into the external HD. Is this my problem? If so how do i carry out the backup function. I have been informed by Hitachi that I should be using the Mac's own "Time Machine" software but I don't seem to be able to locate this.
I have been told that there should be the option to either cancel the backup or skip the file but I don't get that.
Any ideas as I am running out of patience.
vic

If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

HT201365 How can I get around the system lock pin code if I dont know what it is? I have my username and passwork

I have switched on my MAC after 2 months of no use and I am getting the grey screen asking for a system lock pin code, I dont know what it is, how can I get into my MAC?
Many thanks
Graham

That sounds like it's requestion the Find My Mac passcode. If you don't know it, you'll have to take it to a nearby Apple store with proof of purchase/ownership as only they can unlock it for you.

How do I get around the close IE message

I keep getting a message saying to close IE when I am tryg to install Flash. The only window I have open is the installer window.
How do I get arond this message and get Flash to install?

http://forums.adobe.com/message/5266110

I am trying to change the apple id password and the security questions don't seem to be right. How can I get by the security questions?

I am trying to change my apple password and it asks me 2 security questions. The answer I gave are apparently not correct. How do I get past this step?

For Forgotten Security Questions / Answers...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers.

HT1937 how do i get past the security questions

i just bought a new i tunes gift card and i cant buy any songs with out getting past my security questions that i never have answered before

What AnaMusic said.
However, if you have a rescue email on your Apple ID, upon logging into your Apple ID via http://appleid.apple.com and clicking on "Password & Security" you would see "Would you like to send security reset info to [email protected]" so on... Replacing [email protected] with the rescue email on file, if applicable.

How can I get around the -40 import error?

I'm using iMovie 3.03 and just found out that the -40 error I get when importing videos is due to a 9 minute (and 32 seconds) limit. My imports (1 mov and 1 avi) are just over 14 minutes each. Does anyone know of a work around for this problem? Or of any 3rd party software that will allow me to cut the import in half so I can bring each file into iMovie in 2 parts?
Thanks for any advice you can give.
YH!

OK... I went to the site and downloaded the app. I ran it and it exported 9 mins of the file and then would not export the other half and gave me an error: NSReceiverEvaluationScriptError:4
Then I put the app on my desktop and changed the length of the file exported to 8 mins (using the instructions given with the download. When I ran it again, it said I needed Quicktime Pro to run it.
So... now what I don't want to do is buy Quicktime Pro and find out that it still won't work. Would Quicktime Pro be able to do split the videos? Or at least be able to cut half of the video off and save as another file name?

How do I get around the email Apple ID problem on iCloud?

My Primary Apple ID is not an email address. After following Apple's prompts on my iPhone after installing IOS5 I (and I regret this emmensely), created a new ID with my primary email, the same one that is the email linked to my other Apple ID. It allowed me to do this.
Since iCloud would be fairly unmanageable on my iPhone and Macs with 2 IDs, I'd like to figure out the best way to trick the system to merge all this mess into one account.
Here's my problem.
My primary Apple ID is a simple username.
The email for it is my primary email
The secondary Apple ID account I created for iCloud is that same email.
The email for it is that email.
What I want to do is change my primary Apple ID with the username to the primary email name, in order to make all my iTunes purchases synchable with iCloud.
I do know that Apple does not allow an ID to be cancelled, so I can't go this route to get rid of the current email one.
Dropbox? ;-)
TIA

I signed to iCloud using a [email protected] email address as the username. It's the same email address as my primary ID's email.
The problem is not buying apps or music using the iCloud ID, it's managing them later.
You'll end up with a big mess of apps and music all over the place. You won't be able to sync to iCloud all the music you have on your primary ID.
I made the mistake of buying an expensive app using the iCloud ID on my phone, only to not have it be able to sync to my computer, which uses my primary Apple ID. I had to go through Apple to have them void that purchase and buy it again using my primary Apple ID.
All my issues would have been avoided if Apple had allowed me sign up for iCloud using my current Apple ID.
It's because of their requirement that the ID username needs to be an email address.

How do we get around the billing information for creating an Apple ID?

Have student accounts that do not have credit cards. How can we create an Apple ID without a credit card?

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
If None is not available - On your computer launch iTunes and click “iTunes Store” in the left navigation pane. Click the “down arrow” next to your name at the top right side of the page and click “Account.” Enter your username and password and click “View Account” to log into your account information. Next to your Payment Type, click “Edit.” Select the “None” button and click “Done.” Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
iTunes Store Accepted Forms of Payment
http://support.apple.com/kb/HT5552
 Cheers, Tom

GPS Use - How do I get around the security

Similar Messages

Maybe you are looking for