GPU acceleration with the nvidia 680M card?

Should i have GPU acceleration with the nvidia 680M card? i believe the 680 is supported but is the 680M supported? If not, any plans to support this card in the next update?

I navigated to the cuda support folder and added the Nvidia 680M to the list. The i went to the Nvidia settings and changed the Adobe premiere setting to compatibility mode. Opened my project and began editing. It crashes after a few seconds. 
I'm also getting this full screen issue that people are talking about. For example, when I minimise premiere to work in another program and go back to premiere when i'm done I get a full screen display of the frame currently in the preview window. This also happens when the computer is inactive for a time. I'll came back to the computer after a few minutes to find the view in full screen. Sometimes a double clip it and it brings back the standard editing workspace but sometimes I have to 'control, alt, delete' to start task manager, open a new window (can be anything) and navigated to that window then back to premiere. It's as if Premiere has frozen.

Similar Messages

  • How to setup SATA raid with the nvidia controller card

    yea, how do you enter the setup to make an array with the nvidia controller on the K8 Neo 4 platnum edition?

    Quote from: OptimusDinkus on 13-May-05, 07:49:14
    yea, how do you enter the setup to make an array with the nvidia controller on the K8 Neo 4 platnum edition?
    You need to enable it from bios first...
    Then you will recieve a prompt during boot to hit f10 to configure it.

  • Premiere Pro CS6: GPU acceleration with GeForce GTX 600 series video cards?

    Anyone know if Premiere Pro CS6 support GPU acceleration with the new GeForce GTX 600 series video cards?

    1 - check the results at http://ppbm5.com/ to see which models are listed
    2 - For "some" others, with at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file

  • Please help ... Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later?

    Hi there,
    I'm have a bit of an issue with After Effects and Premiere.
    After Effects:
    Keeps asking for Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0
    Premiere crashes unexpectedly
    Can someone please help
    Much-ly appreciate

    Hi there,
    Sorry took a while to get back to you guys. I have been having some issues with Premiere and Aftereffects CC.
    I recently bought an Apple Pro CTO - Intel Xeon E5 3.7 GHZ Quad-Core with 10MB of L3 Cache, 32GB (4x 8gb) 1866MHZ DDR3 ECC DDR3 RAM, 1TB PCIE-BASED Flash storage, DUAL AMD FIREPRO D500 GPUS with 3GB of GDDR5 VRAM, DUAL Gigabit NIC, 802.11AC, bluetooth, 6x thunderbolt2 ports, MAC OS X.
    Issue 1 - Aftereffects CC
    Ray-tracing o the GPU requires an approved NVIDIA graphics card and CUDA 5.0
    Issue 2 - Premiere CC
    Warp Stabiliser wasn't stabilising correctly and now doesn't work at all in premiere CC. I even tried to link to aftereffects but it still doesn't stabilise the shots correctly.
    I use to operate PC before with Adobe CS6 and I didn't get any issue stabilising.
    If you guys can point me what's the best way to get it to work correctly that would be magic.
    Look forward to hear from you
    Regards,
    Jean-Eddy Moutou

  • Please help :) Error Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0.

    Hi All, if anyone can help me fix this error I will be most aprreciative.
    I get this error when I open After Effects.
    Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray tracing will use the CPU.
    After installing CUDA 5.0 or later, restart your computer.
    For more information see: http://www.adobe.com/go/aeraytracegpu
    Im on a MAc Pro Desktop running latest OSX (OS X 10.9.2 (13C64) and a
    Graphics  Card: ATI Radeon HD 5770 1024 MB (not a NVIDIA its AMD)
    I have tried updating software and the operating system as this is now what recent OSX versions do apparently. Not downoloading the driver software as AMD only support up to the previous operating system.
    Kind Regards Toby.
    Motion Designer / Editor

    I have this warning come up, too. And when I close it, the program crashes. I can't get it to work without it.
    I use Photoshop CC and that works fine.
    I'm running Windows 8.1(more info below). I've tried to read for solutions in forums but none of them provide any.
    Some have said they figured it out but don't say how, another said he re-installed Windows?
    Any help is appreciated!

  • Will LR5 benefit of graphic cards acceleration with the new MacPro ?

    Will LR5 benefit of graphic cards acceleration with the new MacPro ?

    Well, although LR5 is a great improvement of speed, the dev. team should try to work on MF files such as from the Pentax 645D… any speed improvement would be much appreciated, especially with dust removal and masking tools.
    My actual configuration is not so bad, but I can't see how to get more speed from it :
    MacPro 2 x 2,8 GHz Quad-Core Intel Xeon
    RAM 18 Gb 800 MHz DDR2 FB-DIMM (2x1 + 2x2 + 2x3 + 2x4)
    Mac OS X 10.9.1
    ATI Radeon HD 2600 XT
    ATI Radeon HD 5870 1024 MB
    SSD Boot disk: SAMSUNG MMDOE56G5MXP-0VB - 256 Gb
    Working Disk  : 2 x Western Digital 3,5´´ S-ATA III 6 Gb/s Disque dur Caviar Green (WD30EZRX) - 7200 RPM, 64 Mo - Mounted RAID 0 - 6 Tb

  • Brush lag GPU Acceleration with AMD FirePro M6000

    Hello,
    I currently have a Dell Precision M6700 which I had replaced my old laptop with in attempt to fix this very problem. I'm using Windows 7 x64 with Photoshop CC x64. Whenever I attempt to use my Cintiq 13HD with GPU acceleration enabled, the brush lags horribly on the smallest of canvases. Disabling GPU acceleration fixes it but I use many of the tools such as canvas rotation greatly. I've checked everything from spacing in brushes to trying different drivers. My drivers for my 13HD are the latest and as are the drivers for the Firepro M6000. I'm extremely confused as AMD states that this is a certified adobe photoshop gpu and the FirePro line is made with excellent OpenGL support as far as I'm aware.
    I've searched other threads before with this issue and attempted various fixes to no avail. I'm especially baffled as this is a workstation class GPU. Any help would be much appreciated.
    Thank you,
    Amaron

    Hallo,
    it's been some time since your post, but can you tell me whether the issue has been resolved? I have a Cintiq 21UX and I'm thinking about buying a Dell Precision M6700 with exactly that Video Card, but if there's no prospect of it being supported properly in current and future Versions of Photoshop, then that's no option...
    Thanks for any help!

  • Premiere Elements 9 crashes with multiple NVIDIA graphics cards under Windows 7

    I've just installed Premiere Elements 9 and found that it will not run at all with multiple NVIDIA graphics cards active under Windows 7.  Per all the other discussions, I updated the NVIDIA drivers and Quicktime support to the latest versions.  (NVIDIA version 260.99).  I have both a 9400 GT and an 8400 GS installed, to support multiple monitors.  They both use the same driver.  The PRE 9 organizer will run, but as soon as I create or load a project it quickly crashes.
    On a long shot I disabled the 8400 GS card in the Device Manager and now I can run PRE 9.  Of course this means giving up one of my monitors.  Any other ideas?

    Over in the Premiere Pro area (or maybe it was in the Hardware section... didn't pay a lot of attention 'cause it really didn't matter to me) I read a message about using two nVidia cards with no problems (other than no dual-card SLI support)
    I **think** that was with two SAME model nVidia cards
    And, of course, PPro is completely different code, so PreEl may simply not work with two nVidia cards

  • IMac with the NVidia 8800 option -- How noisy/quiet is it ?

    Hi,
    I have a PC with Vista, and I am just about to pull the trigger and get an iMac.
    Noise is very important to me, and I am wondering if I should choose the NVidia option because of the noise. I am planning on running XPlane on this computer, and I know it will run better with the NVidia card.
    Does anybody have an iMac with the NVidia card ? What's the difference in terms of noise with the ATI option ?
    Thanks in advance.
    Message was edited by: buzdelabuz2

    Hi,
    I wish I could say I was 100% happy with this iMac, but unfortunately, this isn't so.
    While the original topic, the sound level, is just as we talked, as soon as you start pushing this NVIDIA graphic card, it causes the computer to crash. It's actually worse than what I was experiencing with Vista. Everytime it crashes, it has some funny badly rendered graphic on the screen, and just totally lock up on me. Sometimes it's so bad, I can't even ssh to the machine. Although I can't say for sure, it looks like the problem comes from the NVIDIA graphic card.
    Truth to be told, I use a lot of graphic intensive applications like VmWare Fusion and iPhotos, but that's what it's supposed to be for!!!
    I have to reboot the iMac every day almost. A real shame.

  • HT1911 If I make a new iTunes account with the same credit card number can I still have the same thing I bought from my other account?

    If I make a new iTunes account with the same credit card number can I still have the same thing I bought from my other account?

    Not without buying them from the new iTunes Store account.
    (84283)

  • HT3910 I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    I  face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
    If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
    (61713)

  • How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

    How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

    There is no way any fellow user here can know anything specific about your repair status.  You will need to call Apple and ask them yourself.

  • An App to choose what app will activate the Nvidia graphics card.

    The nvidia grahics card comes on when i use soundbooth. and google voice in gmail. but it doesnt come on when i use photoshop. I want to use it so that when i open photoshop the nvidia graphics come on. I have the gfxCardStatus but i dont feel like switching it everytime

    If your PowerMac G5 has AGP graphic card interface,
    http://www.ebay.com/itm/Nvidia-7800-GTX-512MB-for-Apple-Power-Mac-FASTEST-G5-Gra phics-Quadro-4500-RARE-/251632876303?pt=LH_DefaultDomain_0&hash=item3a967cfb0f
    http://www.ebay.com/itm/GeForce-6800-Ultra-256Mb-AGP-PowerMac-G5-Graphic-Card-/1 51589334837?pt=LH_DefaultDomain_0&hash=item234b6daf35
    http://www.ebay.com/itm/Genuine-Mac-Geforce-6800-Ultra-256mb-AGP-Graphics-Video- Card-For-PowerMac-G5-/261671618907?pt=LH_DefaultDomain_0&hash=item3cecd8095b

  • Is it possible to install Snow Leopard on a PC and to run it with two Nvidia Quadro Cards and 8 Screens?

    Is it possible to install Snow Leopard on a PC and to run it with two Nvidia Quadro Cards and 8 Screens?

    Furthermore, all new Macs since 2006 have been able to have Windows or Linux installed on them natively with virtualization engines*:
    http://www.macmaps.com/macosxnative.html#WINTEL
    You may even want to consider a used Mac Pro*:
    http://www.macmaps.com/usedrefurbished.html

  • Is there a iphone 6 that is unlocked and compatible with the sprint SIM card?

    ok so my Galaxy s4 caught on fire the other day while I was sleeping. And so now instead of getting another galaxy that might do the same thing I'm switching to apple. Now my question is, is there an iphone 6 that is unlocked an compatible with the sprint SIM card. Because my SIM card from the galaxy is still good, but I don't want to go to sprint and get it from them because I'm switching carries in a year.

    Iphone does NOT store to the SIM at all.
    You should be syncing iphone to your computer regularly so all of your contacts should be on your computer in whatever program you have chosen to sync.

Maybe you are looking for

  • Print frames is grayed out, how can I print only one GMAIL frame ?

    I would like to print the contents of a mail in gmail, and not everything around it. Using print frames does not seem to work, it is grayed out. Is there a solution for this ? I read somewhere that sometimes something that looks like a frame is not r

  • How to locate the path of ExpressVI associated with a step in TestStand 3.1??

    When I associate an ExpressVI with a Step in Teststand 3.1 by using SpecifyModule, its Path is not available in any of the Teststand Variables unlike Standard VI's whose path is located in "Step.TS.SData.VIPath".  Is there any way I can find out the

  • How to reconfigure notification email and smtp addresses

    Hi all, I want to reconfigure notification email and smtp addresses on single instance db (10.2 and 11.1 versions). How this is done?

  • MIGO for a subcontracting order

    Dear Friends While doing MIGO for a subcontracting order, I recd a message “Please select an instance of compliance with shipping instructions”. Please tell me meaning for this message. Regards Sanjeev

  • Automate Batch Action Bug?

    I'm seeing a strange issue when I automate an action in Photoshop CC (14.0).  I have a simple action that does three things in this order: 1. Flatten Image 2. Convert to 8-Bit 3. Add some standard file info When I run the action from the action menu