Gpu is gone in my com this should not have happenned the com got little work was minded like baby surely apple will bear some responsibility for this. help me please
please help why has gpu gone surely this should not have happenned. only one user ever no games played ect.
help hrlp
Only Apple can answer that question, take it to an Apple Store.
Similar Messages
-
I needed iDvd, but since my iMac is newer, I didn't have iDvd on it. I installed iLife 11. I shouldn't have installed the iPhoto part because now my iPhoto wouldn't work since iLife 11 was 9.1 and my iMac had 9.2. So I used iPhoto Library Manager to create a new library. That was working, but my computer ran out of hard drive room since my original iPhoto had 137 GB of photos. My new iPhoto library had the majority of my pics and the iPhoto now worked with those pics. But now I still had all of those original pics in my hard drive. I thought that by getting rid of the original iPhoto on the iPhoto Library Manager I would get rid of all of those original pics. I now have no access to them but they are in my hard drive and I can't do much with my iMac because it is all clogged up with those original pics - I think. How do I get rid of my original iPhoto pics out of my hard drive?
What system are you running? If it's Mt. Lion go to the App Store and sign in with the Apple ID you used to purchase the Mac. Go to Purchases and download iPhoto again. The current version is 9.4.3.
If you're unable to download iPhoto from the App Store you can reomstall iPhoto from the iLife 11 disk and update it from the Apple Downloads website to the highest version you can get to (I was able to update all the way to 9.4.3 via the updaters). Then if iPhoto can't open the library use iPhoto Library Manager to rebuild it and it will rebuild it compatible with your version of iPhoto via this iPLM tutorial: Fat Cat Software - iPhoto Library Manager Help - Downgrading a library to an earlier version of iPhoto
OT -
1st - itunes downloaded to my ipod albums that are all fractured, compilation albums are seperated.This should not have happened but itunes felt it knew better. I do not like it.
2nd - While trying to fix it, itunes made all albums and artists unknown
3rd - While trying to get an answer I am unable to contact anyone or even send an email requesting an answer.
4th - While trying to use the "fast lane" i ran into trying to find the product S/N, I went to my account and it was not there. I tried to see it on the back of the Ipod but had to find a magnifying glass to even read it.
5th -- The we will get back to you really ****** me off
6th -- I have wasted 2 hours to fix something that should not have happened and the situation is worse than when i started
7Th --- Itunes management of songs is terrible and there are NO instructions and even worse no support
8th ---- Apple is going down the toilet because the products are good, not great, and the itunes instructions are non existent
9th --- to even suggest i pay for product support is insulting and a sign that apple is desperate
10th -The suggestion for online feedback is this; BE ON-LINE SUPPORT, NOT WHATEVER YOU CONSIDER IT TO BE NOW.I agree with stevejobsfan - (0123).
However, if what you actually want to do is to fix/sort out your problem, why no try posting a question on that subject?
For starters - you can re-name the tracks in your iTunes library, so it is possible to correct the changes that you must have made that mean that songs are now "unknown artists and albums." -
I have two macs in my house. One is newer and came with the os x mountain lion software and the other one needs to be upgraded. I was wondering if there is a way to take upgrade from one to the other? Should not have to buy this software again.
Welcome to Apple Support Communities
Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one -
Big Mistake, I upgraded to OS X Mavericks this morning and now I have lost all my e-mail folders where I was saving important e-mails. I did a mailbox rebuild and it did not bring them back. Should not have upgraded?
I do not remember what version of OS it was. I have carbonite back up but I am not sure it backed up my e-mail.
-
[svn:fx-trunk] 7787: this should not have been checked in.
Revision: 7787
Author: [email protected]
Date: 2009-06-12 09:24:18 -0700 (Fri, 12 Jun 2009)
Log Message:
this should not have been checked in. This will fix the build.xml
bugs: no
qa: no
checkintests: pass
Modified Paths:
flex/sdk/trunk/frameworks/build.xml -
found out i can't update ipod touch 4th generation to ios7 which is now required to use facetime. have used facetime for several years with family now can't use. Apple should not take away the capabilities you already have paid for!!
No correct, you do not need iOS for FaceTime. You only needed to update to iOS 6.1.6.
Unable to make or receive FaceTime calls after April 16, 2014
If you are having problems:
iOS: Troubleshooting FaceTime -
JavaDocError: Utility classes should not have a public or default construct
Hello all,
I am trying to comply with some check style errors that i am getting and i cannot seem to figure out what is going on. I have set all non-data members to private, except for call point public static void main(string[] args) and i am still getting this error. "Utility classes should not have a public or default constructor." I cannot figure out what is going on, any help would be greatly welcomed. My code is posted below.
public final class Main
* Constant Data Member: RECTANGLE
* Purpose: contains the constant string representing a rectangle.
* @deprecated RECTANGLE Representitive string value for a rectangle.
public static final String RECTANGLE = "rectangle";
* Constant Data Member: TRIANGLE
* Purpose: contains the constant string representing a triangle.
* @deprecated TRIANGLE Representitive string value for a triangle.
public static final String TRIANGLE = "triangle";
* Constant Data Member: REGEX_NUMBER_TEST
* Purpose: contains the constant for numerical test within regex method.
* @deprecated REGEX_NUMBER_TEST regex string for digit comparison.
public static final String REGEX_NUMBER_TEST = "^[0-9]+$";
* Constant Data Member: MAX_ARGUMENTS_RECTANGLE
* Purpose: contains the constant for the maximum number of allowed
* arguments coming in from the command line.
* @deprecated MAX_ARGUMENTS_RECTANGLE constant for rectangle argument.
* limit.
public static final int MAX_ARGUMENTS_RECTANGLE = 3;
* Constant Data Member: MAX_ARGUMENTS_TRIANGLE
* Purpose: contains the constant for the maximum number of allowed
* arguments coming in from the command line, in the case of a
* triangle object.
* @deprecated MAX_ARGUMENTS_TRIANGLE constant for triangle argument limit.
public static final int MAX_ARGUMENTS_TRIANGLE = 2;
* Method: main
* Purpose: Is the execution point for the program. It is in charge of
* initiating validation and the creation and application of
* objects and their related draw methods.
* @param args input from the user.
public static void main(final String[] args)
String objectType = null;
int width = 0;
int height = 0;
if(args.length > MAX_ARGUMENTS_RECTANGLE || args.length <
MAX_ARGUMENTS_TRIANGLE || (args.length == MAX_ARGUMENTS_TRIANGLE &&
!isTriangle(args[0])))
// fails
outputErrorMessage();
else
if ((isTriangle(args[0]) && args.length > MAX_ARGUMENTS_TRIANGLE) ||
(!isTriangle(args[0]) && args.length > MAX_ARGUMENTS_RECTANGLE))
// fails becuase triangle should only have one argument
outputErrorMessage();
else
// passes and proceed
objectType = args[0];
if (validNumber(args[1]))
width = Integer.parseInt(args[1]);
if(width == 0)
outputErrorMessage();
else
....Add a private constructor.
private Main() { }
...This way it will be not possible to create an instance because it is not needed to use its static members or methods.
ref : [http://www.javapractices.com/topic/TopicAction.do?Id=40]
Bye. -
Revision: 2472
Author: [email protected]
Date: 2008-07-14 13:21:25 -0700 (Mon, 14 Jul 2008)
Log Message:
remove flex4.swc - should not have been checked in as it gets produced during the compile
remove StyleProperty.vm - it is no longer used
Removed Paths:
flex/sdk/trunk/frameworks/libs/flex4.swc
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/StyleProperty.vmMy daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Newbie: Method should or should not have side effects
Hi experts,
What does it really mean when I read for the InputVerifier class that the method 'shouldYieldFocus' can have side effects but the method 'verify' should not have side effects.
Thanks for you comments.
tuckieI am but a newbie only asked to learn and maintain. The reason I ask about side effects is that the shouldYieldFocus() method is invoked twice for the same tab key event. When the tab key (or mouse click) wants to move focus to another input the current input's shouldYieldFocus() is invoked, it in turn invokes verify() which validates data returning true or false and checks to see if a warning should be issued that the data is legal but high. If the data is not high it also returns true and the focus is yielded. Also shouldYieldFocus() is only invoked once. It is when the data is high and the showConfirmDialog() is put up that I get the second shouldYieldFocus() invocation. The previous coder put in a de-bouncing mechanism and I think this is where/how the problems with the next field are created. Sometimes the next field's focusLost() is invoked without the operator making any input. The focusLost() does some fill in the blank things that are reasonable only if the operator really wanted not to fill in any data in the field.
Back to my original point, I was wondering if the fact that the verify() method may have a dialog box put up before it returns to shouldYieldFocus() is the kind of thing that shouldn't be done - no side effects. If so then it could be the likely cause of the problem with the next field sometimes being automatically filled in as if it had received a focusLost() event.
tuckie -
I guess I should not have messed with my file sharing pref...now I'm toast
I use my Airport to connect to my DSL.
I was "messing around" with my SHARING configuration (Apple...System Pref....Sharing...) and did something awful. I no longer have wireless connection to my Verizon router. I can hook up and get online (as I'm doing now) with Ethernet , but not Airport.
The Airport ICON is now GREY and has an ARROW (pointing UP) though it. Never seen that before.
And when I click on the icon I can't find my net work. The other Macs in the house work fine with airport.
Verizon tech support could not help.
How can get my Sharing preference back to normal (I was trying and guessing how to connect my other imacs around my home , without really knowing what I was doing. And I did something in there to screw this up).
Help please
JONSys Prefs Sharing should not have messed up your ability to connect wirelessly to your router.
Click on the on your menubar, click on "About This Mac" then click on "More Info..." Find "Airport Card" under "Network" and click on it. Does it say something like "No information found" or is your Airport card being recognized? If Airport is recognized as existing, I would next look in Sys Prefs Network, authenticate on the padlock in the lower lefthand corner, click on AIrport then click on Advanced, then check stuff in there, like on the Airport tab, is your home network listed there anymore? Try deleting it and readding it. Under TCP/IP, are you using DHCP (or whatever you use)? Or might it have gotten changed to a setting that is incompatible with your router's settings?
To get the Sharing Prefs "back to normal," just uncheck all of the checkboxes in Sharing and it will be back in its OEM state. -
I have a Power Book OS 10.4.11 and cant access my radio library. I believe I deleted something I should not have. How do I reload Itunes and will I loose my music I loaded? I do not have the original software. I was trying to free up some memory and removed the wrong thing.
If you mean the listing of internet streams that seems to have disappeared for many users of older iTunes versions over week ago. Probably some update at Apple broke older versions. No idea if it will ever come back but you can open stream URLs you find on the web and save them in playlists.
-
I have received the "licensing has stopped working" Error code 150:30. I have done all 8 suggested fixes and have had no luck fixing this mess. Anyone able to help.
Great!
Now in Terminal at the $ prompt type sudo python <leave a space after that> Do not press enter or return yet.
Drag and drop "license recover.py" into the Terminal window, then press enter or return.
You should see this result: Confirm that you do. -
How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09? I understand that I should not have a page break mid paragraph but that is what I want.
Hi stephanie,
These are unrelated questions/statements.
Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
Regards,
Barry -
Hello,
Seems like Apple will not help me accept with their hand out and money in it!
Not enough that I put out like $800.00 for my Ipad Mini they need cash to answer the most basic for questions.
What did I turn off that I should not have.
Realistate Application was working fine but now does not show Geo local map with the dot showing the graphical location of the listingMake sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Maybe you are looking for
-
Does K9N Platinum support NCQ hard drives? I plan to buy a hard drive with NSQ support and wanted to know.
-
Ipod recognized by windows, not in itunes (multiple computers)
4th gen ipod click wheel + windows 2003 server w/ firewire and/or Vista notebook w/ USB + itunes 7.1. Both of my Windows machines see the ipod fine. I made sure there are no drive letter conflicts. Itunes just never recognizes the ipod. Strangely, if
-
Itunes wont open after upgrading
I upgraded to the newest version of itunes and now when i try to open it it pops up and says: iTunes has encountered a problem and needs to close. We are sorry for the inconvience After that it asks if you want to see what the error report contains a
-
Having backed up ipad, erased and reloaded several times (grrr), eventually worked out that photostream sharing didn't work when keyboard bluetooth connected. Just disconnect and all fine. Surely some conflict between ios7 and the Logitech hardware??
-
VF03 - Userexit to make column details invisible
Dear techies, Following is my requirement in tcode VF03 & VF02: In line item details, i need to make data in column 'COST' invisible. I have gone through all userexits avaliable for tcode VF02 nad VF03. But none of them satisfies my requirement. Plea