GPU temp increasing rapidly after 10.10.3when I open photo app

Just updated to 10.10.3. After the update I see that the photo app is very unstable and just opening the app increases the GPU temps and it does not stop going up until I close the app. I don't even have to use it, just leaving the app open cause temp skips. I laptop GPU when up-to 83°C . Anyone else facing this issue? Do we have a solution?
I am using MacBook Pro (Retina, Mid 2012).
2.3 GHz Intel Core i7
16 GB 1600 MHz DDR3
Dual GPU card(Intel HD Graphics 4000 1024 MB,NVIDIA GeForce GT 650M)
Thank you.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • How do I revert back to Iphoto '11 after an unexpected library migration to Photos app

    The 10.10.3 Yosemite update unexpectedly migrated the iPhoto '11 library to the new Photos app format.  I have 15,000+ pictures and prefer iPhoto.  How to revert back?

    casablanca 24
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • How do I fix orientation of photos after they were changed after importing iPhoto library into new Photo app in Yosemite?

    When I switched over to the new Photos app in Yosemite v10.10.3 and imported my iPhoto library to it, random photos in my library had their orientation changed. Some are upside down and some are turned on their side. I have a huge photo library, so this is frustrating. Hoping I don't have to go in and fix each one. I tried rebuilding my library by lauching Photo holding down option+command, but that didn't fix anything. Please help! Mahalo!

    You do not have duplicate albums or photos.
    Photo Stream
    http://www.apple.com/icloud/features/photo-stream.html
    The Camera Roll is for photos/videos that were captured by your iPhone, and for a photo saved from a received email, MMS, or from a website. These photos are also placed in the Photo Stream to be synced with your computer and/or with another iOS 5 device. Photos/videos in the Camera Roll can and should be imported by your computer as with any other digital camera.
    All photos transferred from your computer via the iTunes sync process are stored in the iPhone's Photo Library. The photos in the folders or albums below include a pointer to the original photos stored in the Photo Library. The photos are not duplicated taking up double the storage space. This way you can view the photos in a particular folder or album below only by selecting the folder or album, or you can view all photos in all folders or albums be selecting Photo Library.
    This cannot be changed.
    Removing photos or folders/albums of photos from your iPhone that were transferred from your computer via the Tunes process is done in the same way - via the iTunes sync process.

  • Cannot open Photos app after today's upgrade

    Hello
    I upgraded the Yosemite OS today to the new version with Photos
    All seemed to be ok except for Photos which is not opening as every time i try to open it the system tells me: an error occurred please restart application
    All info is still in the iPhoto app but i never managed to actually start the migration process due to this blocking error
    I tried restarting and turning the Mac Off but to no avail
    I am using a MacBook Pro of 2012
    I cannot remove Photos to reinstall it as this is embedded in the Yosemite OS so any idea is more than welcome
    Have a nice day and thanks for the help on this
    Dimitri Dupont

    Additional info - all still works on Iphoto so nothing is "lost". It is just that i never get further than the startup screen and when clicking on the blue "start" button the error message appears

  • Syncing error status in photo app (in ipad air) after sync through itunes

    after syncing from itunes to ipad air, the photos (8000+photos , with separate folders) does not transfer, and keep giving status Syncing... when i open photo app in ipad air. how do i transfer all my pictures into my ipad now?
    after syncing through itunes, the folders are all empty and Syncing... message keeps appearing

    Hello, suffianr78. 
    Thank you for visiting Apple Support Communities.
    If you have the sync photos preference selected in iTunes and photos are still not syncing, I would recommend processing the steps in the article below.
    iTunes: Unable to sync photos
    http://support.apple.com/kb/TS3697
    Cheers,
    Jason H.

  • Sawserver memory Increased rapidly and crashes the services.

    Hi Gurus,
    In my development env we are using Windows Server 2003 R2, OBIEE 10.1.3.3.2, Internet explorer 6 and Oracle 10 g . When i logged in and go to the Dashboard which having only one simple report (table view report, Oracle) I entered the value in prompt and i got the result. Once i got the result when i am clicked on refresh button which is below the dashboard report and i saw the memory of the sawserver service in task manager is increasing. Then i am keep on doing this for few times it increased lot and after that my browser get freeze and i cant do anything. At that time when i am trying to restart the service i cant stop them i have to kill the services ( BI Admin and presentation).
    My Question is, Is this behavior is right? why the sawserver services are increasing rapidly when i am trying to refresh the report.
    Might be you are asking me why i am refreshing the report. Because we got the heap error in the production and production team told that sawserver is not releasing the memory. So to test that i have done above task
    Thanks in advance
    Regards
    @li

    How you noticed the Heap error in production and also How you noticed that saw server is not releasing the memory ..can you please help me to find out and what you did as saw server was increasing..

  • MacBookPro 15" 1.1: Strange GPU temp sensor behaviour

    Hello to all,
    Since I let my trusty MBP alone for a week two months ago some real strange behaviour occured.
    I left my MBP in standby as usual. When I came back from my trip, the battery was completely discharged and I had to connect the power adapter. MBP awoke from suspend to disk (grey screen, progress bar) and a few seconds after beeing ready for work, fans started to rev up. 5 min later the fans were running at full speed.
    Puzzled, I did a restart. Same behaviour, high RPM right after boot logo, full 6000rpm after a few minutes.
    When I took a look at iStatMenus I saw that the GPU Heatsink Sensor Temperature was around 35 degrees Celsius (around 70 Fahrenheit) higher than the GPU Temp sensor itself. It was the highest readout by all sensors, which makes no sense at all.
    I tried: PRAM reset, SMC reset, PMU reset. Apple Hardware Diagnostic CD by me and a German ASP, and by a Genius Bar expert. No errors shown.
    But over the two months the difference between the values sank to 18-20deg Celsius, and I found a tool to let only the CPU sensor control the fan, so I was happy again.
    Yesterday I came back from another trip, guess what: battery empty, woke up from standby..... the difference is now around 36 deg Celsius, and the MBP shuts down automatically even on the smallest YouTube clip when GPU Heatsink Temp exceeds around 86deg Celcius.
    I am clueless, everybody around me too. So maybe one of you has an idea?
    Regards, Matthias

    Not sure about sensors adapting to reality by themselves. This sounds like very strange behavior. I wonder if there could be something like a loose connection somewhere.
    Did the computer misbehave in front of the genius? If it didn't, it might be worth while seeing if you can determine the exact circumstances under which it will act up so you can make it act up in front of the genius.
    For example, my iBook used to freeze, but only when warmed up. I went to the genius bar early so I could give it time to warm up so that it would be sure to malfunction in front of them. This is especially important to do if you are still under warranty. It's important to establish that a problem first occurred under warranty, especially if your warranty is close to running out.
    Good luck!

  • Is there a way to find the GPU temp on my MB Pro (2011 model)

    iStat only shows CPU, HD, Enclosure base, and Memory banks. I'd like to know if I'm burning out my GPU and change what I'm doing accordingly. Is there an app that will tell me what the temp is?

    iStat Pro widget:
    http://www.macupdate.com/app/mac/20364/istat-pro

  • IMac iSight GPU Temp?

    Hi,
    I just got my iMac iSight a couple days ago, and i was monitoring the temp of the iMac with Temperature Monitor when i noticed that sometimes my GPU Temp will go up to around 96°C/205°F ... is that normal? i dont want to burn up my graphic card... thanks in advance for any help on this..

    Valhalla:
    Are you referring to you CPU temperature or the GPU because there are two GPU temperature sensors. I assume you mean the CPU. I don't care what you were told. To me 205 is too hot. Noone else has reported a temperature that high. In fact, I believe the earlier versions shut down around 180+. Why should this one be able to go up to over 200?
    I would call help desk again find out what is the accepted range, tell them you think it is running to hot and a new computer or any computer should run that hot. Better yet, find out at what temperature the computer shuts down. Get a case number and make sure you tell the individual that you fear it will burn up your graphic card.
    Or tell Apple you are returning the computer. I would be very tempted to return it and don't fret about how long it would take to get another.

  • Ipad loses charge rapidly after IOS7 install.  It went from 100% to 80% without using it

    Why does Ipad and Iphone lose charge so rapidly after the IOS7 upgrade.  I have notifications off and all apps closed. 

    Perhaps these suggestions will help:
    http://www.apple.com/batteries/iphone.html
    also
    http://theweek.com/article/index/250098/ios-7-battery-life-6-simple-ways-to-keep -your-iphone-powered-up
    http://www.tuaw.com/2013/09/18/how-to-stop-ios-7-from-destroying-your-iphones-ba ttery-life/
    One final unconfirmed possibility:
    http://ipadnerds.com/fix-battery-drain-issue-ios-7/
    Regards.

  • Battery use increased significantly after installing 7.03 on apple 4S phone

    BBattery usage increased significantly after installing 7.03 on my Apple 4S phone. No apple support. Anyone else experiencing the same problem?

    Mvcapital wrote:
    BBattery usage increased significantly after installing 7.03 on my Apple 4S phone. No apple support. Anyone else experiencing the same problem?
    Shut down all apps in the multitasking drawer, double tap the home button, swipe up on the mini screen for each app to close them. Press home to close drawer.
    Do a Reset All Settings reset.  You will not lose any content or media, but you will have to reset any setting you changed in Settings.  This includes setting email to fetch rather than push if you did that. Settings => General => Reset => Reset All Settings.  If you use a passcode you will be asked to enter it.
    Restart your phone, hold down both Home and Power buttons until Apple log appears and phone restarts. 
    I would recommend setting your email to manually fetch rather than push unless you absolutely need to have push email.  I have mine set to Fetch and check it every couple of hours, or more often if I am expecting something.
    Once you have all your settings reset, run the battery down all the way to the point where the phone won't turn on.  Plug it into a wall outlet and let it charge over night.
    I did all this and am getting really good battery life.  The trick is the Reset All Settings reset and running the battery down.  This resets the battery meter so it accurately reflects the true charge left in the battery.
    Once a month run it down and recharge it over night to keep the meter accurate.

  • Average GPU temp?

    I just wanted to know some other peoples average GPU temp for just browsing the web or light use mines is 54 C or 120 F is that too hot?

    That's perfectly normal. Temps can get into the upper 70s or low 80s (°C) during heavy use.

  • MSI GT780DX Embedded Controller gpu temp detection

    Hi Svet,
    I wanted to ask you something (if it is possible).
    Recently I upgraded to a Clevo 7970m from the Nvidia 570m the notebook came with originally.
    I noticed something however that the fan does not ramp up with the gpu temperature rising.
    I'll make an example: I start Kombustor/Furmark where only the gpu gets stressed. Then I start monitoring with Afterburner.
    What happens is that the gpu starts heating up but the fan remains at idle levels. It can reach as high as 80 deg and still the fan would not spin faster.
    With the cpu it doesn't do this. Once the cpu starts heating up the fan spins normally.
    What do you think it could be? I think it's related to the EC not reading the gpu temp.
    If it can be done I'll donate as soon as possible
    Running stock bios 1761_30.H with EC 1761_1419 (ver. 4.19)
    I also upgraded the MEI to version 7.1.5 (can it be upgraded further?)
    Here's the bios EC an vbios I use:
    https://mega.co.nz/#!LdEw3IIa!CTdTSkxeEzOiK-etQfBeSzt7KJMCBgPFoi3UGS1qYNA
    Thank You

    Hi,
    Any updates. I am also very interested in this.
    Thanks.

  • Getting the GPU temp on a Radeon Card, and is a Radeon X850 PRO 256MB PC card flashable for use in Mac G5?

    I decided to post this as a new topic since it really didn't belong on the tail end of my X800 XT thread of woe...
    Is there any program that can get the GPU temp of a Radeon video card on a Mac?  I have done quite a bit of looking online and have come up with nothing. Strange, since this is usually a concern for all computer owners..  I don't even care if it's unstable, beta, hack city.
    The second part of this question is:  I have a PC AGP video card "Radeon X850 PRO 256MB", and I wanted to know if it is flashable to use in a Powermac G5.
    The card looks a lot like the X800 XT, except for the chip on the underside of the card that says "ATI Rage Theater" on it.
    Here is a link to a pic of the underside of the card that I found on PhotoBucket:
    http://media.photobucket.com/image/recent/dualamdmp/DSCF6296.jpg
    Here is the top side:
    http://s1238.photobucket.com/albums/ff489/dualamdmp/?action=view&current=DSCF629 2.jpg
    In case my efforts completely strike out getting a video card with an ADC port (basically the X800 XT or X850 XT), I am starting to look for a reasonably priced DVI to ADC converter.
    Thanks!

    Is there any program that can get the GPU temp of a Radeon video card on a Mac?
    No.
    Radeon X850 PRO 256MB...I wanted to know if it is flashable to use in a Powermac G5.
    Possibly. BUT, it won't output digital, which is what you need to use a DVI to ADC adapter.
    All flashed Radeon X800/X850 will only output analog.
    A flashed FireGL X3 , using a Mac Radeon X800XT ROM will output both ports digital, and one of those is also dual link DVI (in case one wants a 30" Cinema Display).
    That's the only flashed X800 that outputs digital.
    If you're going the adapter route, consider an OEM or a flashed Geforce 6800 GT or Ultra.
    The Ultra actually out performs the X800XT in some areas, with the GT not far behind.
    A flashed Geforce 6800 GT can be a real performance value, often times a bargain.

  • TS5192 After updating with 4.09 my photos which I store on an external hard drive will load into Aperture for 15 or so photos and then I just get the same photo repeating despite clicking on a different one in the group.  I have to stop working and come b

    After installing the 4.09 fix to process RAW from Sony RX100 (after updating to 3.5.1), photos do not continue to load into Aperture from the external hard drive where they are referenced.  The same photo is stuck in the adjustments frame to be worked on and the photos will not advance, no matter what I try, so i can work on the next one.  I can only work on a few at a time and then i have to go away and come back another day.  4.09 does fix the barrel distortion but it has completely gummed up the uploading of the referenced photos.  It's taking me days and weeks to process a couple of hundred photos.

    The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
    It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
    You should evaluate whether or not you have adequate RAM:
    Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
    Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
    HTH
    -Allen

Maybe you are looking for

  • Attachments (suddenly) can't be saved by recipient puzzle.

    I have been regularly sending attachments (photos) to clients, from my Mac Pro, with no problem for many years. Today I sent the same two photos to two different clients, and they both said the photo was embedded in the text with no way to save it. N

  • LR3: Repeatable Crash on Web Upload

    Each time I try to upload a photo web collection to my site using SFTP, my 64-bit Windows edition of  Lightroom 3 crashes.  The status shows that the export stage is complete, and that it's preparing the web site -- although I think the crash is actu

  • Purchased web template completely displaced in desing view. How to fix it ?

    Hi, I've bought html5 web site template by hoping to edit in DW CC but although It was described as "Easy Editable" when I opened in design mode layout was completely displaced.  It wasn't possible to find anything and edit. but in live mode everthin

  • Using ATGDust to test Formhandlers in MultiSite context

    Is it possible to use ATGDust to test multi-site functionalities of ATG? I have overridden ForgotPasswordHandler to set the message subject based on curent site name, which I get using SiteContextManager.getCurrentSiteContext().getCurrentSite().getIt

  • Terminal commands with automator and Safari

    Hey guys, I'm trying to create an automator that will open safari, enable private browsing, go to my site, and log myself in. The problem is I need a terminal command line that will ensure private browsing is enabled. Any tips / help is appreciated.