GPU usage, ATI Radeon HD4870 = 0
Hi, I'm doing just some simple tests in motion, and while doing monitoring of the GPU card (atMonitor), I see that Motion is not using the GPU at all, nor more than 1 CPU.
Is this really true or have I done something wrong....?
sincerely Helge
Motion uses the GPU to do all its heavy lifting, I'm not sure how accurately the atMonitor software reflects this, nor how taxing your project is. CPU is used to perform the math, but the GPU does all the image manipulation.
Patrick
Similar Messages
-
MBP core 2 duo MBP outpunching dual Quad Xeon MacPro/ATI Radeon HD4870-why?
Specifically, on the Mac Pro, in a Pro Res 422 HQ timeline, FCP generated text requires rendering in safe mode with a red bar and in unlimited RT (dynamic frame rate/quality) is showing as an orange render. On my old MBP, text plays back fine in safe mode, with a light green preview bar. Any ideas?
system details below:
MBP
Model Name: MacBook Pro
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-158
EFI Driver Version: 01.00.158
Displays:
Color LCD:
Resolution: 1680 x 1050
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Built-In: Yes
Cinema HD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
MacPro
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.93 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per core): 256 KB
L3 Cache (per processor): 8 MB
Memory: 12 GB
Processor Interconnect Speed: 6.4 GT/s
Boot ROM Version: MP41.0081.B07
SMC Version (system): 1.39f5
SMC Version (processor tray): 1.39f5
Serial Number (system): CK93607720H
Serial Number (processor tray): J593101341LUE
Hardware UUID: EADC4ED0-49BF-5086-8B85-946B76A1E1BB
ATI Radeon HD 4870:
Chipset Model: ATI Radeon HD 4870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x9440
Revision ID: 0x0000
ROM Revision: 113-B7710F-176
EFI Driver Version: 01.00.318
Displays:
Cinema HD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Display Connector:
Status: No Display ConnectedJust a guess but it may be a buried preference setting somewhere.
Use a preference manager to save current configurations, (re)save the project, trash the preferences on both and open the same project on both machines.
Let us know what happens. -
ATI Radeon HD4870, not used with motion as GPU acceleration
Hi, I have a problem with my setup. Motion does not use my ATI card for GPU acceleration.
So a simple project on my new mac with this card, is much, much slower than my macbookpro with Nvidia GeForce 9400M, or my old edit machine that has a Radeon X1900 on a macPro 3GHz.
And the atMonitor utility shows good use of GPU on these machines, but on my new machine with ATI HD 4870 card, the GPU is never used in motion.... So what is wrong with my HD4870 card.
/HelgeMotion uses the GPU to do all its heavy lifting, I'm not sure how accurately the atMonitor software reflects this, nor how taxing your project is. CPU is used to perform the math, but the GPU does all the image manipulation.
Patrick -
Yo i purcased a ATI 9800 pro today and i had problems with 8x agp so i put it on 4x then i played counterstrike. So i saw some strange problems the game runs on 80 fps okay thats good. But the game stil lags not lag because of the fps but just a strange lag. so i tried a higher Hz but it on 70 Hz but stil the same problem. what could it be help me.
Mobo: MSI KT4AV-L
RAM: Corsair 2x 256 ddr pc 2700
GPU: Sappire ati radeon 9800 pro
HD: maxtor 120 gb 8 mb cache
CPU: AMD Athlon XP 2800+
PS: unnamed 300 WPROBLEM SOLVED i just had to turn on vsync from the control panel lol
-
Ati Radeon HD 6370M code 43 in device manager after installing driver - can't get GPU to work
Hello
I have bought a second hand HP laptop recently and I am having hard time installing GPU drivers and getting it to work at all.. so here is my story:
I was told that the product I bought is a HP Pavillion DV7-4142eo. I have removed the battery and checked the labels under it - and indeed the manufacturers labeled it as a DV7 4142eo laptop.
HOWEVER - and now comes the fun part - the product number in the bios (XZ288UAR#ABA) belongs to the HP Pavilion dv7-4263cl. This is also true according to hp automatic product detection app.
I used the system information tool on windows 7 and pcidatabase.com to determine the models of the graphic cards in my laptop. It turns out it has an ATI Mobility Radeon HD 4250 and an Ati Radeon HD 6370M gpu.
First I tried to install the ATI Mobility Radeon HD 5650 Graphics driver, because this gpu belongs to the DV7-4142eo laptop. It didnt work, in the windows 7 device manager I got two times "standard vga graphic adapter" showing.
Next I tried tried autodetection and used amddriverdownloader. This tool recomended installing the following driver: 13-9-legacy-vista_win7_64_dd_ccc_whql.exe . After installing this driver the integrated graphic card ( ATI Mobility Radeon HD 4250) works perfectly but I the other one - the more powerful one, the Ati Radeon HD 6370M - doesn't work. In the device manager it is labeled as "standard vga graphic adapter". Installing its own driver doesn't work as it results in the problem stated in the Subject.
What do you suggest me to do? Do you think code 43 means that my laptop's GPU is broken? Please help.
Thank youHi:
I would go with the product code...and say it is a HP Pavilion dv7-4263cl Entertainment Notebook PC.
Accordingly, this would be the only AMD graphics driver you can use.
Uninstall all previous graphics drivers and reboot before attempting to install this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89582-1&cc=us&dlc=en&lc=en&... -
Recently reinstalled Windows. However now, Premiere 5 jerks and jumps when trying to playback a video file that's not exactly to the specifics of the sequence options -- however, before the reinstall everything was fine! I think it might be that it's no long using the GPU? I'm using an ATI Radeon 5700, and the AVI files from Fraps were playing back fine before the reinstall.
Anyway I can actually make Prem use the GPU? Or is there a setting in the CCC that needs to be changed?
(Edit: the only thing that has changed is the moniter, but surely that wouldn't change anything?)
(Edit2: OK, found out that GPU is only for nVidia cards, but still is there aynthing that could have changed this?)Ok. Well. I found out what was wrong. It was the FPS overlap fraps does. The overlay was over the preview window and causing jumping and feezing, once it was turned off and no number present, it was smooth as anything.
-
Is the Flash player GPU acceleration supported on the ATI Radeon X1900 XT?
Anyone know if Flash player 11.1.102.55 GPU acceleration is supported on the ATI Radeon X1900 XT? I didn't see it explicitly listed in the unsupported hardware list (http://kb2.adobe.com/cps/921/cpsid_92103.html). The card is not displaying any of the stage 3D content unless I disable hardware acceleration. I get the same results whether I use Firefox, Chome, or Safari.
I'm on a Mac, my system specs are;
Processor 2 x 3 GHz Dual-Core Intel Xeon
Memory 2 GB 667 MHz DDR2 FB-DIMM
Graphics ATI Radeon X1900 XT 512 MB
Software Mac OS X Lion 10.7.2 (11C74)
If I need to I'll replace the card but I want to make sure it's the issue before I do.
Thanks in advance for any insight.I'm wondering the same thing. I have an X1950 pro and am trying to get it to help out with youtube videos.
The latest X**** driver was released in 2010, and the original driver at the very earliest March 2009. Both the X1900XT and X1950 Pro are not listed on that list.
However, I do recall feeling Flash player 11 being slightly faster than Flash 10 when I first installed it. Flash still didn't become "10x" faster and 720p through 1080p video certainly still isn't smooth. -
I purchased a MacBook Pro with an ATI Radeon X1600 GPU in 2006. Several weeks ago the GPU failed and I was advised that a replacement logic board was needed and this would cost upwards of £500 by various Apple authorised repair centres that I contacted.
The system is not worth £500 in working condition.
It appears that I am not the only one that has found this issue, long after the warranty on the system had expired. In addition a number of people have began on online petition to raise awareness of the situation.
Several months ago a more recent MacBook Pro (circa 2008) with an NVIDIA GPU failed and I was able to have the logic board replaced for free as this was a known fault, even though my system was out of warranty.
I was very annoyed to find that the hardware defect in ATI GPU's has not resulted in the same replacement program. I therefore had to pay an engineer to attempt to fix the system through a component level repair, which failed. My 4 year old system that cost me a lot of money is now dead.
I expected a lot more longevity from this system, and I am sorely disappointed. I am feeling a little ripped off.
I am the current of owner of a iPhone 4 (2010), MacBook Pro 13" (2010), iMac (2010), iPhone 3G (2008), MacBook Pro 15" (2008) and one dead MacBook Pro 15" (2006).
As you can see I have spent a lot of money on Apple products and accessories, My very first purchase has now died due to ATI GPU failure and I have already replaced a logic board on a 2008 system due to an NVIDIA GPU failure.
I have never hesitated to recommend Apple products before, until now!
I'd like Apple to acknowledge this issue and offer customers with the faulty hardware replacement logic boards, I'd expect Apple to recover this cost from ATI who manufactured the faulty hardware.
I hope that this post serves to raise awareness of the issue and prompts an appropriate response.
Thanks for reading.
Dave.Your instructions basically work because you're deleting the ATI display drivers, so OS X defaults to no hardware acceleration. In the very long "display anomalies" thread to which you linked, this seems to be related as a pretty common solution.
This is not a solution IMO. It's basically telling your computer not to use the built-in video card for much more than a frame buffer. Why is this a bad thing? Well, while it eliminates the anomalies and inevitable freezing, it also makes your computer unusable for anything requiring hardware acceleration (which is a lot of things these days, including 3d games and HD video playback, though the latter can still work albeit more slowly).
You claim that the problem is due to bugs in the ATI driver, but there are two issues with that theory: 1. the problem also happens under Windows via Boot Camp, using several different versions of ATI's Catalyst drivers that support the R500 family (which the X1600 is a member of); and 2. these sorts of anomalies tend to be usually indicative of hardware failure. For example, the nvidia 8800 series famously had similar issues (more and more graphical anomalies followed by eventual lock-ups), which were ultimately caused by hardware failure relating from many heat cycles.
In this case, the thing that seems closest to the truth to me came in a forum post over at the WoW forums (see the last post, by member "Flloyd"):
Flloyd's post
(Linking to the Google cache because the original seems to have been deleted.)
Quoting the relevant part here:
"There has been a lot of discussion an Apple forums and other forums about these issues with the Core Duo (not Core 2 Duo) version 1.1 MBPs with the x1600 GPU. The general consensus is that it is definitely a hardware problem and someone mentioned that Apple knows internally that it is an issue with the solder connection between BGA packages and the main board. These machines came out right around when manufacturers were just starting to become ROHS compliant, (the standard that forbids the use of solder containing lead in electronics,) and so it is not surprising to me, (having dealt with some similar issues from the point of view of the manufacturer at work,) that these problems are happening. The lead-free solder is much more brittle than the old kind and solder joints that crack after many thermal cycles are a common problem that everyone trying to use the lead-free solder has had to confront. That being said, Apple still needs to fix this, because anyone who bought one of these would have had no expectation of this kind of failure and many would have bought something else if they knew this was a possibility."
Thus, the little BGA solder balls become worse over time, and when heated enough (i.e. when the GPU load becomes great enough for long enough, which is when people usually report the problems to occur at first), may start to get a bad connection to the logic board, as a result of thermal expansion or lower conductivity or a combination of things.
Now, I'm not 100% sure that this is the answer, but it seems most plausible to me. The other common explanation for this is that the thermal paste is applied unevenly on the GPU, or that the thermal paste gets old. However, while people report getting fewer anomalies after re-applying thermal paste, the problems usually stick around and once again start to get worse over time. My theory here is that while re-applying thermal paste helps with lowering GPU temps and lowering the frequency of the symptoms, it doesn't solve the underlying issue. You can get the same effect (lower GPU temps) by downloading and using the Fan Control preference pane or downloading and using the smcFanControl application to increase fan speed. Like re-applying thermal paste, this would decrease GPU temps (and thus incidence of graphical anomalies and eventual lock-ups), but not eliminate the problem.
It's sad that Apple doesn't (and likely won't) acknowledge this problem as a hardware defect. As far as I know, the issue manifests itself only after several years of use, which is when warranty (even AppleCare) has run out. Those who are lucky enough to have had the Macbook under warranty when symptoms first appeared just had their logic boards replaced for free, and later reported the same problems appearing after a few years with the new logic boards (which predictably contained the same hardware flaw). As I've said before, I'm not 100% confident in this particular explanation, but I am 100% confident that it's a hardware issue.
So nowadays, people generally have the choice of either buying a new laptop or forking over $300-600 for a new or used logic board to extend the life of the Macbook for a few more years, which would inevitably fail again. There is hope though: the aforementioned nvidia cards (the GeForce 8800 series) with the hardware flaw were eventually recalled and replaced for free, but a lot of people have reported resurrecting their dead cards using this unorthodox method:
http://hardforum.com/showthread.php?t=1421792
http://hardforum.com/showthread.php?t=1553073
http://hardforum.com/showthread.php?t=1470144
The same method also worked for people with different failing cards (even built-in laptop GPUs, such as we are talking about here), and not just the GeForce 8800 series. I might try this out in a week or so and see if it works for me and report back. I just don't know if it's worth it -- this is my primary work laptop and I can't afford to have to mess around with getting a new one in the middle of the school year if it dies in the process. Not to mention the fact that while the problem certainly is annoying, since I have to save my work every few minutes in anticipation of the computer locking up, it's certainly not critical.
<URL Embedded by Host> -
GPU improvement on ATI Radeon 2600 PRO versus Win7
I installed Windows 7 with Radeon ATI drivers in Boot Camp and boy does Windows fly and speeds are up I don't know how much. Folding at Home runs at flying speeds. Windows 7 loads applications instantly.
Will iMac 24 with Radeon 2600 PRO be supported VERY soon on Mac OS X 10.6.1 ?
I might return to Windows (7) after I tried having an OS running using the GPU. Great.What are the chances Apple would be kind enough to still swap my card for a new unaffected one?
I'm in the same boat. :\ Mine just died too, would I need to take my tower to an Apple Store? Or how would I go about asking Apple to replace my graphics card?
Also, if I were to put in a different graphics card (say the ATI Radeon HD 5770), how difficult is it to replace? Would my Mac Pro (Early 2008) be able to handle it? I have 2x2.8GHz Quad-Core Intel Xeon (8-core) processor, the ATI Radeon HD 5770 says it requires Mac Pro (Mid 2010) with PCI Express 2.0 slot and OS X 10.6.4, whereas I'm still on just 10.5 Leopard and have an Early 2008 model...
On another thread, here, The Hatter, said something about baking the card in the oven? Would that work if Apple won't replace it for free?
I have never opened up my tower before (I don't know how!) and I have been wanting to upgrade my RAM as well. I have 4x1GB cards and I wanted to move up to like 8 or 16GB. I was thinking about buying RAM from NewEgg or Amazon, whichever is cheaper, any suggestions?
Thank you for any help and sorry about hijacking the thread! >~< Should I make my own thread or continue in this one? I'm sorry, I just don't want to cause any problems...I will make a new one if need be. -
Using ATI RADEON it says only CUDA 5.0 Nvidia GPU for After Effects
I'm using AMD radeon graphic card instead of specified Nvidia CUDA
so,..now After Effects will work on ATI radeon or not???
what should i do for this issue??my system specifications are graphics: ATI RADEON 2GB
processor: intel i3
so,...my problem with Adobe After Effects is
while opening AAE the graphic card is not supporting
it is asking for Nvidia CUDA 5.0
now,..AAE will not work on my lappy??
what is the solution for this?? -
ATI Radeon HD 6520G / 7600M troubles. Glitches, crashing and such.
I've been am having issues with getting my graphics card to work properly.
EDIT: tl;dr Running cinnamon with xf86-video-ati is no bueno https://dl.dropbox.com/u/7122698/bbs_ar … adface.png (other stuff happen as well, but this is the most annoying)
I was using catalyst until recently. When I deemed the glitches and the occasional crashing (which I assumed were caused by the driver) to be too much,
I decided to switch over to xf86-video-ati.
While the open source drivers seem to work, they manage to somehow corrupt pixmaps/textures and they manage to hang my computer even more often than the catalyst did.
I'm running aur/linux-lqx 3.6.4-1-lqx (as well as core/linux 3.6.5-1), extra/xf86-video-ati 1:6.14.6-2, extra/xorg-server 1.13.0-3, extra/gdm 3.6.1-2 and aur/cinnamon 1.6.4-4 . I've
also moved the damn thing to core/systemd 195-2 with sysvcompat.
I doubt that the problems are caused by gnome 3.6 having troubles with systemd or ati drivers, as I'm also having texture corruptions in opengl applications (using SDL for init stuff.)
I'm sure that there is nothing wrong with my cards, as they work fine under windows.
Right now I'm running using late kms start.
/etc/X11/ contains configs for twm, xinit and input drivers (all installed by their respective pkgs), as well as the config that I'm using right now:
/etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "UghImSoAngryNow"
Driver "radeon"
Option "NoAccel" "on"
EndSection
This is, of course, not preferable. However, it fixes nearly all the pixmap corruption problems and I haven't gotten it to die on me yet. Occasionally, my desktop background becomes
black with lines of varying (read: 50) shades of grey (aka. white noise), before it reloads itself, but haven't crashed yet.
The wiki page on ATI tells me to try and disable KMS by booting with radeon.modeset=0 or nomodeset. However, this causes Xorg to fall back to xf86-video-vesa, which
is itself quite glitchy (cursor flickers, all ttys are corrupted (unusable) except for the one I'm on, etc.)
Any help fixing this would be greatly appreciated.
(I'll see if I can post screens with the artifacts.)
Stuff nobody needs:
$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6520G]
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:10.0 USB controller: Advanced Micro Devices [AMD] Hudson USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13)
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices [AMD] Hudson SD Flash Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
$ cat /var/log/Xorg.0.log # With accel enabled
[ 10381.855]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10381.855] X Protocol Version 11, Revision 0
[ 10381.855] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 10381.855] Current Operating System: Linux dotfloat-asus 3.6.4-1-lqx #1 ZEN SMP PREEMPT Sun Nov 4 19:35:58 CET 2012 x86_64
[ 10381.855] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lqx root=UUID=bfd9d0cd-2be7-4539-9dc4-d273dbecbb5d ro resume=/dev/sda6 mem=4G
[ 10381.855] Build Date: 19 October 2012 03:54:56PM
[ 10381.855]
[ 10381.855] Current version of pixman: 0.26.2
[ 10381.855] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10381.855] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10381.855] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 5 22:08:35 2012
[ 10381.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10381.855] (==) No Layout section. Using the first Screen section.
[ 10381.855] (==) No screen section available. Using defaults.
[ 10381.855] (**) |-->Screen "Default Screen Section" (0)
[ 10381.855] (**) | |-->Monitor "<default monitor>"
[ 10381.855] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 10381.855] (**) | |-->Device "UghImSoAngryNow"
[ 10381.855] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10381.855] (==) Automatically adding devices
[ 10381.855] (==) Automatically enabling devices
[ 10381.856] (==) Automatically adding GPU devices
[ 10381.856] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10381.856] Entry deleted from font path.
[ 10381.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10381.856] Entry deleted from font path.
[ 10381.856] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10381.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10381.856] Entry deleted from font path.
[ 10381.856] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10381.856] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 10381.856] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10381.856] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10381.856] (II) Loader magic: 0x7fcc20
[ 10381.856] (II) Module ABI versions:
[ 10381.856] X.Org ANSI C Emulation: 0.4
[ 10381.856] X.Org Video Driver: 13.0
[ 10381.856] X.Org XInput driver : 18.0
[ 10381.856] X.Org Server Extension : 7.0
[ 10381.857] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10381.857] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10381.858] (--) PCI:*(0:0:1:0) 1002:9647:1043:2122 rev 0, Mem @ 0xb0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 10381.858] (--) PCI: (0:1:0:0) 1002:6840:1043:2122 rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 10381.858] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10381.858] Initializing built-in extension Generic Event Extension
[ 10381.858] Initializing built-in extension SHAPE
[ 10381.858] Initializing built-in extension MIT-SHM
[ 10381.858] Initializing built-in extension XInputExtension
[ 10381.858] Initializing built-in extension XTEST
[ 10381.858] Initializing built-in extension BIG-REQUESTS
[ 10381.858] Initializing built-in extension SYNC
[ 10381.858] Initializing built-in extension XKEYBOARD
[ 10381.858] Initializing built-in extension XC-MISC
[ 10381.858] Initializing built-in extension SECURITY
[ 10381.858] Initializing built-in extension XINERAMA
[ 10381.858] Initializing built-in extension XFIXES
[ 10381.858] Initializing built-in extension RENDER
[ 10381.858] Initializing built-in extension RANDR
[ 10381.858] Initializing built-in extension COMPOSITE
[ 10381.858] Initializing built-in extension DAMAGE
[ 10381.858] Initializing built-in extension MIT-SCREEN-SAVER
[ 10381.858] Initializing built-in extension DOUBLE-BUFFER
[ 10381.858] Initializing built-in extension RECORD
[ 10381.858] Initializing built-in extension DPMS
[ 10381.858] Initializing built-in extension X-Resource
[ 10381.858] Initializing built-in extension XVideo
[ 10381.858] Initializing built-in extension XVideo-MotionCompensation
[ 10381.858] Initializing built-in extension XFree86-VidModeExtension
[ 10381.858] Initializing built-in extension XFree86-DGA
[ 10381.858] Initializing built-in extension XFree86-DRI
[ 10381.858] Initializing built-in extension DRI2
[ 10381.858] (II) LoadModule: "glx"
[ 10381.859] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10381.859] (II) Module glx: vendor="X.Org Foundation"
[ 10381.859] compiled for 1.13.0, module version = 1.0.0
[ 10381.859] ABI class: X.Org Server Extension, version 7.0
[ 10381.859] (==) AIGLX enabled
[ 10381.859] Loading extension GLX
[ 10381.859] (II) LoadModule: "radeon"
[ 10381.859] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 10381.859] (II) Module radeon: vendor="X.Org Foundation"
[ 10381.859] compiled for 1.13.0, module version = 6.14.6
[ 10381.859] Module class: X.Org Video Driver
[ 10381.859] ABI class: X.Org Video Driver, version 13.0
[ 10381.859] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA
[ 10381.866] (++) using VT number 1
[ 10381.867] (II) [KMS] Kernel modesetting enabled.
[ 10381.867] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10381.867] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 10381.867] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 10381.867] (==) RADEON(0): Default visual is TrueColor
[ 10381.867] (==) RADEON(0): RGB weight 888
[ 10381.867] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 10381.867] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x9647)
[ 10381.867] (II) RADEON(0): PCIE card detected
[ 10381.867] (II) Loading sub module "exa"
[ 10381.867] (II) LoadModule: "exa"
[ 10381.867] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 10381.906] (II) Module exa: vendor="X.Org Foundation"
[ 10381.906] compiled for 1.13.0, module version = 2.6.0
[ 10381.906] ABI class: X.Org Video Driver, version 13.0
[ 10381.906] (II) RADEON(0): KMS Color Tiling: enabled
[ 10381.906] (II) RADEON(0): KMS Pageflipping: enabled
[ 10381.906] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 10382.004] (II) RADEON(0): Output VGA-0 has no monitor section
[ 10382.044] (II) RADEON(0): Output LVDS has no monitor section
[ 10382.108] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 10382.205] (II) RADEON(0): EDID for output VGA-0
[ 10382.245] (II) RADEON(0): EDID for output LVDS
[ 10382.245] (II) RADEON(0): Manufacturer: CMO Model: 15a7 Serial#: 0
[ 10382.245] (II) RADEON(0): Year: 2010 Week: 31
[ 10382.245] (II) RADEON(0): EDID Version: 1.3
[ 10382.245] (II) RADEON(0): Digital Display Input
[ 10382.245] (II) RADEON(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 10382.245] (II) RADEON(0): Gamma: 2.20
[ 10382.245] (II) RADEON(0): No DPMS capabilities specified
[ 10382.245] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 10382.245] (II) RADEON(0): First detailed timing is preferred mode
[ 10382.245] (II) RADEON(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 10382.245] (II) RADEON(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 10382.245] (II) RADEON(0): Manufacturer's mask: 0
[ 10382.245] (II) RADEON(0): Supported detailed timing:
[ 10382.245] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 10382.245] (II) RADEON(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 10382.245] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 10382.245] (II) RADEON(0): N156BGE-L21
[ 10382.245] (II) RADEON(0): CMO
[ 10382.245] (II) RADEON(0): N156BGE-L21
[ 10382.245] (II) RADEON(0): EDID (in hex):
[ 10382.245] (II) RADEON(0): 00ffffffffffff000dafa71500000000
[ 10382.245] (II) RADEON(0): 1f140103802313780a00259e57529929
[ 10382.245] (II) RADEON(0): 15505400000001010101010101010101
[ 10382.245] (II) RADEON(0): 010101010101121b5664500014301022
[ 10382.245] (II) RADEON(0): 260058c110000018000000fe004e3135
[ 10382.245] (II) RADEON(0): 364247452d4c32310a20000000fe0043
[ 10382.245] (II) RADEON(0): 4d4f0a202020202020202020000000fe
[ 10382.245] (II) RADEON(0): 004e3135364247452d4c32310a200095
[ 10382.245] (II) RADEON(0): Printing probed modes for output LVDS
[ 10382.245] (II) RADEON(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10382.245] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 10382.245] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 10382.245] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 10382.245] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 10382.309] (II) RADEON(0): EDID for output HDMI-0
[ 10382.309] (II) RADEON(0): Output VGA-0 disconnected
[ 10382.309] (II) RADEON(0): Output LVDS connected
[ 10382.309] (II) RADEON(0): Output HDMI-0 disconnected
[ 10382.309] (II) RADEON(0): Using exact sizes for initial modes
[ 10382.309] (II) RADEON(0): Output LVDS using initial mode 1366x768
[ 10382.309] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 10382.309] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
[ 10382.309] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 10382.309] (==) RADEON(0): DPI set to (96, 96)
[ 10382.309] (II) Loading sub module "fb"
[ 10382.309] (II) LoadModule: "fb"
[ 10382.309] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10382.309] (II) Module fb: vendor="X.Org Foundation"
[ 10382.309] compiled for 1.13.0, module version = 1.0.0
[ 10382.309] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10382.309] (II) Loading sub module "ramdac"
[ 10382.309] (II) LoadModule: "ramdac"
[ 10382.309] (II) Module "ramdac" already built-in
[ 10382.309] (--) Depth 24 pixmap format is 32 bpp
[ 10382.309] (II) RADEON(0): [DRI2] Setup complete
[ 10382.309] (II) RADEON(0): [DRI2] DRI driver: r600
[ 10382.309] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 10382.309] (II) RADEON(0): Front buffer size: 4128K
[ 10382.309] (II) RADEON(0): VRAM usage limit set to 228182K
[ 10382.309] (==) RADEON(0): Backing store disabled
[ 10382.309] (II) RADEON(0): Direct rendering enabled
[ 10382.379] (II) RADEON(0): Setting EXA maxPitchBytes
[ 10382.379] (II) EXA(0): Driver allocated offscreen pixmaps
[ 10382.379] (II) EXA(0): Driver registered support for the following operations:
[ 10382.379] (II) Solid
[ 10382.379] (II) Copy
[ 10382.379] (II) Composite (RENDER acceleration)
[ 10382.379] (II) UploadToScreen
[ 10382.379] (II) DownloadFromScreen
[ 10382.379] (II) RADEON(0): Acceleration enabled
[ 10382.379] (==) RADEON(0): DPMS enabled
[ 10382.379] (==) RADEON(0): Silken mouse enabled
[ 10382.379] (II) RADEON(0): Set up textured video
[ 10382.379] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 10382.379] (II) RADEON(0): [XvMC] Extension initialized.
[ 10382.379] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10382.379] (--) RandR disabled
[ 10382.749] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 10382.749] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 10382.749] (II) AIGLX: enabled GLX_ARB_create_context
[ 10382.749] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 10382.749] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 10382.749] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 10382.749] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 10382.750] (II) AIGLX: Loaded and initialized r600
[ 10382.750] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 10382.775] (II) RADEON(0): Setting screen physical size to 361 x 203
[ 10382.828] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10382.828] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10382.828] (II) LoadModule: "evdev"
[ 10382.828] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10382.829] (II) Module evdev: vendor="X.Org Foundation"
[ 10382.829] compiled for 1.13.0, module version = 2.7.3
[ 10382.829] Module class: X.Org XInput Driver
[ 10382.829] ABI class: X.Org XInput driver, version 18.0
[ 10382.829] (II) Using input driver 'evdev' for 'Power Button'
[ 10382.829] (**) Power Button: always reports core events
[ 10382.829] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 10382.829] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10382.829] (--) evdev: Power Button: Found keys
[ 10382.829] (II) evdev: Power Button: Configuring as keyboard
[ 10382.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 10382.829] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10382.829] (**) Option "xkb_rules" "evdev"
[ 10382.829] (**) Option "xkb_model" "evdev"
[ 10382.829] (**) Option "xkb_layout" "us"
[ 10382.864] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 10382.864] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10382.864] (II) Using input driver 'evdev' for 'Video Bus'
[ 10382.864] (**) Video Bus: always reports core events
[ 10382.864] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 10382.864] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10382.864] (--) evdev: Video Bus: Found keys
[ 10382.864] (II) evdev: Video Bus: Configuring as keyboard
[ 10382.864] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input6/event6"
[ 10382.864] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10382.864] (**) Option "xkb_rules" "evdev"
[ 10382.864] (**) Option "xkb_model" "evdev"
[ 10382.864] (**) Option "xkb_layout" "us"
[ 10382.865] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 10382.865] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10382.865] (II) Using input driver 'evdev' for 'Video Bus'
[ 10382.865] (**) Video Bus: always reports core events
[ 10382.865] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 10382.865] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10382.865] (--) evdev: Video Bus: Found keys
[ 10382.865] (II) evdev: Video Bus: Configuring as keyboard
[ 10382.865] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/LNXVIDEO:01/input/input7/event7"
[ 10382.865] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 10382.865] (**) Option "xkb_rules" "evdev"
[ 10382.865] (**) Option "xkb_model" "evdev"
[ 10382.865] (**) Option "xkb_layout" "us"
[ 10382.866] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10382.866] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10382.866] (II) Using input driver 'evdev' for 'Power Button'
[ 10382.866] (**) Power Button: always reports core events
[ 10382.866] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10382.866] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10382.866] (--) evdev: Power Button: Found keys
[ 10382.866] (II) evdev: Power Button: Configuring as keyboard
[ 10382.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 10382.866] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 10382.866] (**) Option "xkb_rules" "evdev"
[ 10382.866] (**) Option "xkb_model" "evdev"
[ 10382.866] (**) Option "xkb_layout" "us"
[ 10382.866] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 10382.866] (II) No input driver specified, ignoring this device.
[ 10382.866] (II) This device may have been added with another device file.
[ 10382.866] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 10382.866] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 10382.866] (II) Using input driver 'evdev' for 'Sleep Button'
[ 10382.866] (**) Sleep Button: always reports core events
[ 10382.866] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 10382.867] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 10382.867] (--) evdev: Sleep Button: Found keys
[ 10382.867] (II) evdev: Sleep Button: Configuring as keyboard
[ 10382.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 10382.867] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 10382.867] (**) Option "xkb_rules" "evdev"
[ 10382.867] (**) Option "xkb_model" "evdev"
[ 10382.867] (**) Option "xkb_layout" "us"
[ 10382.867] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10382.867] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[ 10382.867] (II) No input driver specified, ignoring this device.
[ 10382.867] (II) This device may have been added with another device file.
[ 10382.867] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10382.868] (II) config/udev: Adding input device Chicony CNFA078 (/dev/input/event9)
[ 10382.868] (**) Chicony CNFA078: Applying InputClass "evdev keyboard catchall"
[ 10382.868] (II) Using input driver 'evdev' for 'Chicony CNFA078'
[ 10382.868] (**) Chicony CNFA078: always reports core events
[ 10382.868] (**) evdev: Chicony CNFA078: Device: "/dev/input/event9"
[ 10382.868] (--) evdev: Chicony CNFA078: Vendor 0x4f2 Product 0xb23b
[ 10382.868] (--) evdev: Chicony CNFA078: Found keys
[ 10382.868] (II) evdev: Chicony CNFA078: Configuring as keyboard
[ 10382.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9/event9"
[ 10382.868] (II) XINPUT: Adding extended input device "Chicony CNFA078" (type: KEYBOARD, id 11)
[ 10382.868] (**) Option "xkb_rules" "evdev"
[ 10382.868] (**) Option "xkb_model" "evdev"
[ 10382.868] (**) Option "xkb_layout" "us"
[ 10382.868] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event12)
[ 10382.868] (II) No input driver specified, ignoring this device.
[ 10382.868] (II) This device may have been added with another device file.
[ 10382.869] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event13)
[ 10382.869] (II) No input driver specified, ignoring this device.
[ 10382.869] (II) This device may have been added with another device file.
[ 10382.869] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 10382.869] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 10382.869] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 10382.869] (**) Asus WMI hotkeys: always reports core events
[ 10382.869] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 10382.869] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 10382.869] (--) evdev: Asus WMI hotkeys: Found keys
[ 10382.869] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 10382.869] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event8"
[ 10382.869] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 10382.869] (**) Option "xkb_rules" "evdev"
[ 10382.869] (**) Option "xkb_model" "evdev"
[ 10382.869] (**) Option "xkb_layout" "us"
[ 10382.869] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10382.869] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10382.869] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10382.870] (**) AT Translated Set 2 keyboard: always reports core events
[ 10382.870] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10382.870] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10382.870] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10382.870] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10382.870] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10382.870] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 10382.870] (**) Option "xkb_rules" "evdev"
[ 10382.870] (**) Option "xkb_model" "evdev"
[ 10382.870] (**) Option "xkb_layout" "us"
[ 10382.870] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 10382.870] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 10382.870] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 10382.870] (II) LoadModule: "synaptics"
[ 10382.870] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10382.870] (II) Module synaptics: vendor="X.Org Foundation"
[ 10382.870] compiled for 1.13.0, module version = 1.6.2
[ 10382.870] Module class: X.Org XInput Driver
[ 10382.870] ABI class: X.Org XInput driver, version 18.0
[ 10382.870] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 10382.870] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 10382.871] (**) Option "Device" "/dev/input/event10"
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 10382.894] (**) Option "TapButton1" "1"
[ 10382.894] (**) Option "TapButton2" "2"
[ 10382.894] (**) Option "TapButton3" "3"
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 10382.894] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 10382.904] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 10382.904] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.075
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 10382.904] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 10382.904] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 10382.904] (II) No input driver specified, ignoring this device.
[ 10382.904] (II) This device may have been added with another device file.
[ 10382.904] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 10382.904] (II) No input driver specified, ignoring this device.
[ 10382.904] (II) This device may have been added with another device file.
[ 10383.047] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10383.047] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10383.047] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10383.591] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10383.592] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10383.592] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10397.163] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10397.163] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10397.163] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10397.460] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10397.460] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10397.460] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10565.020] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10565.020] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10565.020] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10567.301] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10567.301] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10567.301] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10624.571] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10624.571] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10624.571] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10656.759] (II) UnloadModule: "synaptics"
[ 10656.759] (II) evdev: AT Translated Set 2 keyboard: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Asus WMI hotkeys: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Chicony CNFA078: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Sleep Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Power Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Video Bus: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Video Bus: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Power Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.779] Server terminated successfully (0). Closing log file.
Last edited by dotfloat (2012-11-06 22:21:05)Nope. Minecraft seems to run fine, albeit quite slowly:
https://dl.dropbox.com/u/7122698/bbs_ar … pyface.png
Cinnamon screenshot: https://dl.dropbox.com/u/7122698/bbs_ar … adface.png
The rendering errors at the bottom border of the "Cinnamon Settings" window and the white boxes between the chromium tabs. These are more or less permanent, they stay there until the window is destroyed, and reappear quickly after the window is first rendered. The white noise looking things on the chromium window stay there until the window repaints itself. Moving the chromium window causes the white noise to start flickering.
The screen froze when I opened a nautilus window and tried to resize it. Xorg.0.log doesn't mention any errors.
This doesn't happen in Cinnamon 2D, so I assume it has something to do with the OpenGL implementation.
Forcing 7600M by adding
BusID "PCI:1:0:0"
to
/etc/X11/xorg.conf.d/20-radeon.cfg
causes Xorg to not even start.
I'm thinking that I've managed to improperly configure the drivers, although I don't see how.
Screenshot from aur/doomsday running doom shareware: https://dl.dropbox.com/u/7122698/bbs_ar … s_good.png
The .wad (data file containing all the game's assets) isn't corrupted. The engine itself might be, as the sprites are always corrupted in the same way. Note the barrel on the right side that has parts of a lower resolution version of itself (mipmapping) and blue armour, the light thingy in the middle that contains a lower resolution of itself and a shotgun ammo, and the pillar in the other room that is just not nice to look at. Moving away or towards the sprite (which effectively changes the mipmap level rendered) might make the sprite look as it is supposed to be. -
Blue screen and restart / ThinkPad T40 2373-94G Windows 7 and 32MB ATI Radeon 9000
Hello !
I'm having a lot of trouble with video driver for windows 7 for ati radeon 9000.
There is no driver for windows 7 and I tryed with driver for winXP, ... etc and didnt find any solution .
Actually driver for windows xp actually works on windows 7, but as soon as I tried to open any application or game I got blue screen with error and computer reboots...
Thank you for any information or solution !
My computer is :
Product: ThinkPad T40 2373-94G [change]
Operating system: Windows 7 [change]
Original description: P M 1.6GHz, 512MB RAM, 80GB 4200rpm HDD, 14.1 SXGA+(1400x1050) TFT LCD, 32MB ATI Radeon 9000, 16x10x24x/8x CD-RW/DVD(slim), Bluetooth/Modem, 1Gb Ether, Intel 802.11b , Sec Chip, UltraNav, 9 cell Batt, WinXP ProWelcome to the forum!
As I'm sure you know by know, your GPU is not supported in W7.
That being said, take a look at this thread:
http://forum.thinkpads.com/viewtopic.php?f=57&t=77964
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
HT4664 Can I upgrade my ATI Radeon HD 2600?
Here are my specs.
Is it possible for me to upgrade my ATI Radeon HD 2600? I want to try out FCP X, Compressor and Motion also.
And if so what would be the best way to get my OS and graphics card up to speed? I appreciate yoiur reply. I'm also at Lion 10.6.8
Since I have other important software I haven't wanted to upgrade the OS but I will if I like the new FCP.
Model Name:
Mac Pro
Model Identifier:
MacPro3,1
Processor Name:
Quad-Core Intel Xeon
Processor Speed:
2.8 GHz
Number Of Processors:
2
Total Number Of Cores:
8
L2 Cache (per processor):
12 MB
Memory:
4 GB
Bus Speed:
1.6 GHz
Boot ROM Version:
MP31.006C.B05
SMC Version (system):
1.25f4
Chipset Model:
ATI Radeon HD 2600
Type:
GPU
Bus:
PCIe
Slot:
Slot-1
PCIe Lane Width:
x16
VRAM (Total):
256 MBHi thanks for responding.
I downloaded the 30 day trial version and it will not let me open FCP X. Everytime I attempt to open the trial version I get a message that says,
"This system does not meet the minimum system requirements for graphics cards. For more information on minimum system requirements, visit the Tech Specs page on the Final Cut Pro website."
When I look at the specs for FCP X, I don't see the ATI Radeon 2600 as a graphics card that can be used by FCP X. That's why I'm looking to upgrade, at least my graphics card for starters. -
ATI Radeon 9000 IGP Mobile driver doesn't have hardware acceleration
I installed the xf86-video-ati package and I don't get hardware acceleration. Glxgears gives a painful 80 FPS rate and nothing 3D intensive works, neither 480p/720p youtube videos. Also, it seems that the current drivers identify the card as 9100 instead of 9000, but I know that it's 9000 for sure. The laptop that I'm running is an old one, Compaq Presario R3000 with the Intel CPU.
X.org.0.log
[ 25.819]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 25.819] X Protocol Version 11, Revision 0
[ 25.819] Build Operating System: Linux 2.6.38-ARCH i686
[ 25.819] Current Operating System: Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011 i686
[ 25.820] Kernel command line: root=/dev/sda1 ro
[ 25.820] Build Date: 16 April 2011 12:05:35PM
[ 25.820]
[ 25.841] Current version of pixman: 0.20.2
[ 25.841] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.841] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.841] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 20 00:29:04 2011
[ 25.913] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 25.948] (==) No Layout section. Using the first Screen section.
[ 25.948] (==) No screen section available. Using defaults.
[ 25.948] (**) |-->Screen "Default Screen Section" (0)
[ 25.948] (**) | |-->Monitor "<default monitor>"
[ 25.949] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.949] (==) Automatically adding devices
[ 25.949] (==) Automatically enabling devices
[ 25.998] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 25.998] Entry deleted from font path.
[ 26.073] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 26.073] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.073] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.073] (II) Loader magic: 0x81f4ee0
[ 26.073] (II) Module ABI versions:
[ 26.073] X.Org ANSI C Emulation: 0.4
[ 26.073] X.Org Video Driver: 10.0
[ 26.073] X.Org XInput driver : 12.2
[ 26.073] X.Org Server Extension : 5.0
[ 26.074] (--) PCI:*(0:1:5:0) 1002:5835:103c:006b rev 0, Mem @ 0xe0000000/268435456, 0xd0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 26.075] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.075] (II) LoadModule: "extmod"
[ 26.079] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 26.094] (II) Module extmod: vendor="X.Org Foundation"
[ 26.095] compiled for 1.10.1, module version = 1.0.0
[ 26.095] Module class: X.Org Server Extension
[ 26.095] ABI class: X.Org Server Extension, version 5.0
[ 26.095] (II) Loading extension MIT-SCREEN-SAVER
[ 26.095] (II) Loading extension XFree86-VidModeExtension
[ 26.095] (II) Loading extension XFree86-DGA
[ 26.095] (II) Loading extension DPMS
[ 26.095] (II) Loading extension XVideo
[ 26.095] (II) Loading extension XVideo-MotionCompensation
[ 26.095] (II) Loading extension X-Resource
[ 26.095] (II) LoadModule: "dbe"
[ 26.095] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 26.097] (II) Module dbe: vendor="X.Org Foundation"
[ 26.097] compiled for 1.10.1, module version = 1.0.0
[ 26.097] Module class: X.Org Server Extension
[ 26.097] ABI class: X.Org Server Extension, version 5.0
[ 26.097] (II) Loading extension DOUBLE-BUFFER
[ 26.097] (II) LoadModule: "glx"
[ 26.097] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.111] (II) Module glx: vendor="X.Org Foundation"
[ 26.111] compiled for 1.10.1, module version = 1.0.0
[ 26.111] ABI class: X.Org Server Extension, version 5.0
[ 26.116] (==) AIGLX enabled
[ 26.116] (II) Loading extension GLX
[ 26.116] (II) LoadModule: "record"
[ 26.116] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.117] (II) Module record: vendor="X.Org Foundation"
[ 26.117] compiled for 1.10.1, module version = 1.13.0
[ 26.117] Module class: X.Org Server Extension
[ 26.117] ABI class: X.Org Server Extension, version 5.0
[ 26.117] (II) Loading extension RECORD
[ 26.117] (II) LoadModule: "dri"
[ 26.117] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 26.147] (II) Module dri: vendor="X.Org Foundation"
[ 26.147] compiled for 1.10.1, module version = 1.0.0
[ 26.147] ABI class: X.Org Server Extension, version 5.0
[ 26.147] (II) Loading extension XFree86-DRI
[ 26.147] (II) LoadModule: "dri2"
[ 26.147] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.148] (II) Module dri2: vendor="X.Org Foundation"
[ 26.148] compiled for 1.10.1, module version = 1.2.0
[ 26.148] ABI class: X.Org Server Extension, version 5.0
[ 26.148] (II) Loading extension DRI2
[ 26.148] (==) Matched ati as autoconfigured driver 0
[ 26.148] (==) Matched vesa as autoconfigured driver 1
[ 26.148] (==) Matched fbdev as autoconfigured driver 2
[ 26.148] (==) Assigned the driver to the xf86ConfigLayout
[ 26.148] (II) LoadModule: "ati"
[ 26.149] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 26.165] (II) Module ati: vendor="X.Org Foundation"
[ 26.165] compiled for 1.10.1, module version = 6.14.99
[ 26.165] Module class: X.Org Video Driver
[ 26.165] ABI class: X.Org Video Driver, version 10.0
[ 26.165] (II) LoadModule: "radeon"
[ 26.166] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.235] (II) Module radeon: vendor="X.Org Foundation"
[ 26.235] compiled for 1.10.1, module version = 6.14.99
[ 26.235] Module class: X.Org Video Driver
[ 26.235] ABI class: X.Org Video Driver, version 10.0
[ 26.236] (II) LoadModule: "vesa"
[ 26.237] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.250] (II) Module vesa: vendor="X.Org Foundation"
[ 26.250] compiled for 1.10.0, module version = 2.3.0
[ 26.250] Module class: X.Org Video Driver
[ 26.250] ABI class: X.Org Video Driver, version 10.0
[ 26.250] (II) LoadModule: "fbdev"
[ 26.250] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.269] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.269] compiled for 1.10.0, module version = 0.4.2
[ 26.269] ABI class: X.Org Video Driver, version 10.0
[ 26.269] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS
[ 26.278] (II) VESA: driver for VESA chipsets: vesa
[ 26.278] (II) FBDEV: driver for framebuffer: fbdev
[ 26.278] (++) using VT number 7
[ 26.303] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.303] (II) [KMS] Kernel modesetting enabled.
[ 26.303] (WW) Falling back to old probe method for vesa
[ 26.303] (WW) Falling back to old probe method for fbdev
[ 26.303] (II) Loading sub module "fbdevhw"
[ 26.303] (II) LoadModule: "fbdevhw"
[ 26.303] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 26.304] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 26.304] compiled for 1.10.1, module version = 0.0.2
[ 26.304] ABI class: X.Org Video Driver, version 10.0
[ 26.304] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.304] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 26.304] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.304] (==) RADEON(0): Default visual is TrueColor
[ 26.304] (==) RADEON(0): RGB weight 888
[ 26.304] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 26.304] (--) RADEON(0): Chipset: "ATI Radeon Mobility 9100 IGP (U3) 5835" (ChipID = 0x5835)
[ 26.304] (II) RADEON(0): AGP card detected
[ 26.304] drmOpenDevice: node name is /dev/dri/card0
[ 26.305] drmOpenDevice: open result is 8, (OK)
[ 26.305] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 26.305] drmOpenDevice: node name is /dev/dri/card0
[ 26.305] drmOpenDevice: open result is 8, (OK)
[ 26.305] drmOpenByBusid: drmOpenMinor returns 8
[ 26.305] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 26.305] (II) Loading sub module "exa"
[ 26.305] (II) LoadModule: "exa"
[ 26.305] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 26.306] (II) Module exa: vendor="X.Org Foundation"
[ 26.306] compiled for 1.10.1, module version = 2.5.0
[ 26.307] ABI class: X.Org Video Driver, version 10.0
[ 26.307] (II) RADEON(0): KMS Color Tiling: disabled
[ 26.307] (II) RADEON(0): KMS Pageflipping: enabled
[ 26.307] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 26.338] (II) RADEON(0): Output VGA-0 has no monitor section
[ 26.338] (II) RADEON(0): Output LVDS has no monitor section
[ 26.344] (II) RADEON(0): Output S-video has no monitor section
[ 26.368] (II) RADEON(0): EDID for output VGA-0
[ 26.369] (II) RADEON(0): EDID for output LVDS
[ 26.369] (II) RADEON(0): Printing probed modes for output LVDS
[ 26.369] (II) RADEON(0): Modeline "1280x800"x60.0 68.90 1280 1296 1328 1408 800 804 808 816 (48.9 kHz)
[ 26.369] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 26.369] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 26.369] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 26.369] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 26.375] (II) RADEON(0): EDID for output S-video
[ 26.375] (II) RADEON(0): Output VGA-0 disconnected
[ 26.375] (II) RADEON(0): Output LVDS connected
[ 26.375] (II) RADEON(0): Output S-video disconnected
[ 26.375] (II) RADEON(0): Using exact sizes for initial modes
[ 26.375] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 26.375] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.375] (II) RADEON(0): mem size init: gart size :1dff000 vram size: s:8000000 visible:7bd8000
[ 26.375] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 26.375] (==) RADEON(0): DPI set to (96, 96)
[ 26.375] (II) Loading sub module "fb"
[ 26.375] (II) LoadModule: "fb"
[ 26.375] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.419] (II) Module fb: vendor="X.Org Foundation"
[ 26.419] compiled for 1.10.1, module version = 1.0.0
[ 26.419] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.419] (II) Loading sub module "ramdac"
[ 26.419] (II) LoadModule: "ramdac"
[ 26.419] (II) Module "ramdac" already built-in
[ 26.419] (II) UnloadModule: "vesa"
[ 26.419] (II) Unloading vesa
[ 26.419] (II) UnloadModule: "fbdev"
[ 26.419] (II) Unloading fbdev
[ 26.419] (II) UnloadModule: "fbdevhw"
[ 26.419] (II) Unloading fbdevhw
[ 26.419] (--) Depth 24 pixmap format is 32 bpp
[ 26.420] (II) RADEON(0): [DRI2] Setup complete
[ 26.420] (II) RADEON(0): [DRI2] DRI driver: r200
[ 26.420] (II) RADEON(0): Front buffer size: 4000K
[ 26.420] (II) RADEON(0): VRAM usage limit set to 110534K
[ 26.451] (==) RADEON(0): Backing store disabled
[ 26.451] (II) RADEON(0): Direct rendering enabled
[ 26.470] (II) RADEON(0): Render acceleration enabled for R200 type cards.
[ 26.470] (II) RADEON(0): Setting EXA maxPitchBytes
[ 26.470] (II) EXA(0): Driver allocated offscreen pixmaps
[ 26.470] (II) EXA(0): Driver registered support for the following operations:
[ 26.470] (II) Solid
[ 26.470] (II) Copy
[ 26.470] (II) Composite (RENDER acceleration)
[ 26.470] (II) UploadToScreen
[ 26.470] (II) DownloadFromScreen
[ 26.471] (II) RADEON(0): Acceleration enabled
[ 26.471] (==) RADEON(0): DPMS enabled
[ 26.471] (==) RADEON(0): Silken mouse enabled
[ 26.490] (II) RADEON(0): Set up textured video
[ 26.490] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.490] (--) RandR disabled
[ 26.490] (II) Initializing built-in extension Generic Event Extension
[ 26.490] (II) Initializing built-in extension SHAPE
[ 26.490] (II) Initializing built-in extension MIT-SHM
[ 26.490] (II) Initializing built-in extension XInputExtension
[ 26.490] (II) Initializing built-in extension XTEST
[ 26.490] (II) Initializing built-in extension BIG-REQUESTS
[ 26.490] (II) Initializing built-in extension SYNC
[ 26.490] (II) Initializing built-in extension XKEYBOARD
[ 26.490] (II) Initializing built-in extension XC-MISC
[ 26.490] (II) Initializing built-in extension SECURITY
[ 26.490] (II) Initializing built-in extension XINERAMA
[ 26.490] (II) Initializing built-in extension XFIXES
[ 26.490] (II) Initializing built-in extension RENDER
[ 26.490] (II) Initializing built-in extension RANDR
[ 26.490] (II) Initializing built-in extension COMPOSITE
[ 26.490] (II) Initializing built-in extension DAMAGE
[ 26.598] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 26.598] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 26.598] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 26.598] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 26.598] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 26.599] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r200_dri.so
[ 26.599] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 26.600] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 27.171] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 27.171] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.171] (II) LoadModule: "evdev"
[ 27.199] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.216] (II) Module evdev: vendor="X.Org Foundation"
[ 27.216] compiled for 1.10.0, module version = 2.6.0
[ 27.216] Module class: X.Org XInput Driver
[ 27.216] ABI class: X.Org XInput driver, version 12.2
[ 27.216] (II) Using input driver 'evdev' for 'Power Button'
[ 27.216] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.217] (**) Power Button: always reports core events
[ 27.217] (**) Power Button: Device: "/dev/input/event5"
[ 27.240] (--) Power Button: Found keys
[ 27.240] (II) Power Button: Configuring as keyboard
[ 27.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 27.240] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 27.240] (**) Option "xkb_rules" "evdev"
[ 27.240] (**) Option "xkb_model" "evdev"
[ 27.240] (**) Option "xkb_layout" "us"
[ 27.274] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 27.274] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.274] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.275] (**) Video Bus: always reports core events
[ 27.275] (**) Video Bus: Device: "/dev/input/event2"
[ 27.286] (--) Video Bus: Found keys
[ 27.286] (II) Video Bus: Configuring as keyboard
[ 27.286] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3/event2"
[ 27.286] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 27.286] (**) Option "xkb_rules" "evdev"
[ 27.286] (**) Option "xkb_model" "evdev"
[ 27.286] (**) Option "xkb_layout" "us"
[ 27.397] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 27.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.397] (II) Using input driver 'evdev' for 'Power Button'
[ 27.398] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.398] (**) Power Button: always reports core events
[ 27.398] (**) Power Button: Device: "/dev/input/event4"
[ 27.413] (--) Power Button: Found keys
[ 27.413] (II) Power Button: Configuring as keyboard
[ 27.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event4"
[ 27.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 27.413] (**) Option "xkb_rules" "evdev"
[ 27.413] (**) Option "xkb_model" "evdev"
[ 27.413] (**) Option "xkb_layout" "us"
[ 27.414] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 27.414] (II) No input driver/identifier specified (ignoring)
[ 27.423] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event7)
[ 27.423] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 27.423] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 27.423] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.423] (**) USB OPTICAL MOUSE: always reports core events
[ 27.423] (**) USB OPTICAL MOUSE: Device: "/dev/input/event7"
[ 27.440] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 27.440] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 27.440] (--) USB OPTICAL MOUSE: Found relative axes
[ 27.440] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 27.440] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 27.440] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 27.440] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 27.440] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.4/0000:02:07.0/usb4/4-1/4-1:1.0/input/input8/event7"
[ 27.440] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE)
[ 27.440] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 27.440] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 27.441] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse1)
[ 27.441] (II) No input driver/identifier specified (ignoring)
[ 27.444] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 27.444] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.444] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.444] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.444] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.444] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 27.460] (--) AT Translated Set 2 keyboard: Found keys
[ 27.460] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.460] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event0"
[ 27.460] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 27.460] (**) Option "xkb_rules" "evdev"
[ 27.460] (**) Option "xkb_model" "evdev"
[ 27.460] (**) Option "xkb_layout" "us"
[ 27.461] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
[ 27.461] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 27.461] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 27.461] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.461] (**) PS/2 Generic Mouse: always reports core events
[ 27.461] (**) PS/2 Generic Mouse: Device: "/dev/input/event6"
[ 27.486] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 27.486] (--) PS/2 Generic Mouse: Found relative axes
[ 27.486] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 27.486] (II) PS/2 Generic Mouse: Configuring as mouse
[ 27.486] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 27.486] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.486] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event6"
[ 27.486] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 27.486] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 27.487] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 27.487] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 27.487] (II) No input driver/identifier specified (ignoring)
[ 27.488] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 27.488] (II) No input driver/identifier specified (ignoring)
kernel.log
Apr 20 00:27:00 localhost kernel: [Hardware Error]: Machine check events logged
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpuset
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpu
Apr 20 00:28:52 localhost kernel: Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011
Apr 20 00:28:52 localhost kernel: BIOS-provided physical RAM map:
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000000100000 - 0000000017f70000 (usable)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f70000 - 0000000017f7d000 (ACPI data)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f7d000 - 0000000017f80000 (ACPI NVS)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f80000 - 0000000018000000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000027f80000 - 0000000028000000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Apr 20 00:28:52 localhost kernel: Notice: NX (Execute Disable) protection missing in CPU!
Apr 20 00:28:52 localhost kernel: DMI present.
Apr 20 00:28:52 localhost kernel: DMI: Hewlett-Packard Presario R3000 (PC777AV) /089C, BIOS F.45 04/06/2005
Apr 20 00:28:52 localhost kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Apr 20 00:28:52 localhost kernel: e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Apr 20 00:28:52 localhost kernel: last_pfn = 0x17f70 max_arch_pfn = 0x100000
Apr 20 00:28:52 localhost kernel: MTRR default type: uncachable
Apr 20 00:28:52 localhost kernel: MTRR fixed ranges enabled:
Apr 20 00:28:52 localhost kernel: 00000-9FFFF write-back
Apr 20 00:28:52 localhost kernel: A0000-BFFFF uncachable
Apr 20 00:28:52 localhost kernel: C0000-CFFFF write-protect
Apr 20 00:28:52 localhost kernel: D0000-DFFFF uncachable
Apr 20 00:28:52 localhost kernel: E0000-FFFFF write-protect
Apr 20 00:28:52 localhost kernel: MTRR variable ranges enabled:
Apr 20 00:28:52 localhost kernel: 0 base 000000000 mask FF0000000 write-back
Apr 20 00:28:52 localhost kernel: 1 base 010000000 mask FF8000000 write-back
Apr 20 00:28:52 localhost kernel: 2 base 017F80000 mask FFFF80000 uncachable
Apr 20 00:28:52 localhost kernel: 3 base 027F80000 mask FFFF80000 uncachable
Apr 20 00:28:52 localhost kernel: 4 disabled
Apr 20 00:28:52 localhost kernel: 5 disabled
Apr 20 00:28:52 localhost kernel: 6 disabled
Apr 20 00:28:52 localhost kernel: 7 disabled
Apr 20 00:28:52 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Apr 20 00:28:52 localhost kernel: found SMP MP-table at [c00f6470] f6470
Apr 20 00:28:52 localhost kernel: initial memory mapped : 0 - 01800000
Apr 20 00:28:52 localhost kernel: init_memory_mapping: 0000000000000000-0000000017f70000
Apr 20 00:28:52 localhost kernel: 0000000000 - 0000400000 page 4k
Apr 20 00:28:52 localhost kernel: 0000400000 - 0017c00000 page 2M
Apr 20 00:28:52 localhost kernel: 0017c00000 - 0017f70000 page 4k
Apr 20 00:28:52 localhost kernel: kernel direct mapping tables up to 17f70000 @ 17fb000-1800000
Apr 20 00:28:52 localhost kernel: RAMDISK: 17dca000 - 17f60000
Apr 20 00:28:52 localhost kernel: ACPI: RSDP 000f6500 00014 (v00 PTLTD )
Apr 20 00:28:52 localhost kernel: ACPI: RSDT 17f79185 00030 (v01 PTLTD RSDT 06040000 LTP 00000000)
Apr 20 00:28:52 localhost kernel: ACPI: FACP 17f7ceed 00074 (v01 HP Chinook 06040000 ATI 000F4240)
Apr 20 00:28:52 localhost kernel: ACPI: DSDT 17f791b5 03D38 (v01 HP SB200 06040000 INTL 20030509)
Apr 20 00:28:52 localhost kernel: ACPI: FACS 17f7ffc0 00040
Apr 20 00:28:52 localhost kernel: ACPI: APIC 17f7cf61 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
Apr 20 00:28:52 localhost kernel: ACPI: SSDT 17f7cfc9 00037 (v01 PTLTD ACPIHT 06040000 LTP 00000001)
Apr 20 00:28:52 localhost kernel: ACPI: Local APIC address 0xfee00000
Apr 20 00:28:52 localhost kernel: 0MB HIGHMEM available.
Apr 20 00:28:52 localhost kernel: 383MB LOWMEM available.
Apr 20 00:28:52 localhost kernel: mapped low ram: 0 - 17f70000
Apr 20 00:28:52 localhost kernel: low ram: 0 - 17f70000
Apr 20 00:28:52 localhost kernel: Zone PFN ranges:
Apr 20 00:28:52 localhost kernel: DMA 0x00000010 -> 0x00001000
Apr 20 00:28:52 localhost kernel: Normal 0x00001000 -> 0x00017f70
Apr 20 00:28:52 localhost kernel: HighMem empty
Apr 20 00:28:52 localhost kernel: Movable zone start PFN for each node
Apr 20 00:28:52 localhost kernel: early_node_map[2] active PFN ranges
Apr 20 00:28:52 localhost kernel: 0: 0x00000010 -> 0x0000009f
Apr 20 00:28:52 localhost kernel: 0: 0x00000100 -> 0x00017f70
Apr 20 00:28:52 localhost kernel: On node 0 totalpages: 98047
Apr 20 00:28:52 localhost kernel: free_area_init_node: node 0, pgdat c1450b00, node_mem_map d7aca200
Apr 20 00:28:52 localhost kernel: DMA zone: 32 pages used for memmap
Apr 20 00:28:52 localhost kernel: DMA zone: 0 pages reserved
Apr 20 00:28:52 localhost kernel: DMA zone: 3951 pages, LIFO batch:0
Apr 20 00:28:52 localhost kernel: Normal zone: 735 pages used for memmap
Apr 20 00:28:52 localhost kernel: Normal zone: 93329 pages, LIFO batch:31
Apr 20 00:28:52 localhost kernel: Using APIC driver default
Apr 20 00:28:52 localhost kernel: ACPI: PM-Timer IO Port: 0x8008
Apr 20 00:28:52 localhost kernel: ACPI: Local APIC address 0xfee00000
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Apr 20 00:28:52 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Apr 20 00:28:52 localhost kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Apr 20 00:28:52 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Apr 20 00:28:52 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Apr 20 00:28:52 localhost kernel: ACPI: IRQ0 used by override.
Apr 20 00:28:52 localhost kernel: ACPI: IRQ2 used by override.
Apr 20 00:28:52 localhost kernel: ACPI: IRQ9 used by override.
Apr 20 00:28:52 localhost kernel: Using ACPI (MADT) for SMP configuration information
Apr 20 00:28:52 localhost kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
Apr 20 00:28:52 localhost kernel: nr_irqs_gsi: 40
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Apr 20 00:28:52 localhost kernel: Allocating PCI resources starting at 28000000 (gap: 28000000:d6c00000)
Apr 20 00:28:52 localhost kernel: Booting paravirtualized kernel on bare hardware
Apr 20 00:28:52 localhost kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Apr 20 00:28:52 localhost kernel: PERCPU: Embedded 12 pages/cpu @d7400000 s27392 r0 d21760 u2097152
Apr 20 00:28:52 localhost kernel: pcpu-alloc: s27392 r0 d21760 u2097152 alloc=1*4194304
Apr 20 00:28:52 localhost kernel: pcpu-alloc: [0] 0 1
Apr 20 00:28:52 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280
Apr 20 00:28:52 localhost kernel: Kernel command line: root=/dev/sda1 ro
Apr 20 00:28:52 localhost kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
Apr 20 00:28:52 localhost kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 20 00:28:52 localhost kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 20 00:28:52 localhost kernel: Initializing CPU#0
Apr 20 00:28:52 localhost kernel: allocated 1962880 bytes of page_cgroup
Apr 20 00:28:52 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Apr 20 00:28:52 localhost kernel: Initializing HighMem for node 0 (00000000:00000000)
Apr 20 00:28:52 localhost kernel: Memory: 379216k/392640k available (3182k kernel code, 12972k reserved, 1260k data, 424k init, 0k highmem)
Apr 20 00:28:52 localhost kernel: virtual kernel memory layout:
Apr 20 00:28:52 localhost kernel: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
Apr 20 00:28:52 localhost kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Apr 20 00:28:52 localhost kernel: vmalloc : 0xd8770000 - 0xff7fe000 ( 624 MB)
Apr 20 00:28:52 localhost kernel: lowmem : 0xc0000000 - 0xd7f70000 ( 383 MB)
Apr 20 00:28:52 localhost kernel: .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
Apr 20 00:28:52 localhost kernel: .data : 0xc131b86b - 0xc1456a00 (1260 kB)
Apr 20 00:28:52 localhost kernel: .text : 0xc1000000 - 0xc131b86b (3182 kB)
Apr 20 00:28:52 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 20 00:28:52 localhost kernel: SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Apr 20 00:28:52 localhost kernel: Preemptable hierarchical RCU implementation.
Apr 20 00:28:52 localhost kernel: RCU-based detection of stalled CPUs is disabled.
Apr 20 00:28:52 localhost kernel: Verbose stalled-CPUs detection is disabled.
Apr 20 00:28:52 localhost kernel: NR_IRQS:512
Apr 20 00:28:52 localhost kernel: CPU 0 irqstacks, hard=d700c000 soft=d700e000
Apr 20 00:28:52 localhost kernel: Console: colour VGA+ 80x25
Apr 20 00:28:52 localhost kernel: console [tty0] enabled
Apr 20 00:28:52 localhost kernel: Fast TSC calibration using PIT
Apr 20 00:28:52 localhost kernel: Detected 2999.891 MHz processor.
Apr 20 00:28:52 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.77 BogoMIPS (lpj=9999636)
Apr 20 00:28:52 localhost kernel: pid_max: default: 32768 minimum: 301
Apr 20 00:28:52 localhost kernel: Security Framework initialized
Apr 20 00:28:52 localhost kernel: AppArmor: AppArmor disabled by boot time parameter
Apr 20 00:28:52 localhost kernel: Mount-cache hash table entries: 512
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys ns
Apr 20 00:28:52 localhost kernel: ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpuacct
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys memory
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys devices
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys freezer
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys net_cls
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys blkio
Apr 20 00:28:52 localhost kernel: CPU: Physical Processor ID: 0
Apr 20 00:28:52 localhost kernel: CPU: Processor Core ID: 0
Apr 20 00:28:52 localhost kernel: mce: CPU supports 4 MCE banks
Apr 20 00:28:52 localhost kernel: [Hardware Error]: No human readable MCE decoding support on this CPU type.
Apr 20 00:28:52 localhost kernel: [Hardware Error]: Run the message through 'mcelog --ascii' to decode.
Apr 20 00:28:52 localhost kernel: Disabling lock debugging due to kernel taint
Apr 20 00:28:52 localhost kernel: CPU0: Thermal monitoring enabled (TM1)
Apr 20 00:28:52 localhost kernel: using mwait in idle threads.
Apr 20 00:28:52 localhost kernel: ACPI: Core revision 20110112
Apr 20 00:28:52 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Apr 20 00:28:52 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 20 00:28:52 localhost kernel: ..MP-BIOS bug: 8254 timer not connected to IO-APIC
Apr 20 00:28:52 localhost kernel: ...trying to set up timer (IRQ0) through the 8259A ...
Apr 20 00:28:52 localhost kernel: ..... (found apic 0 pin 2) ...
Apr 20 00:28:52 localhost kernel: ....... works.
Apr 20 00:28:52 localhost kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Apr 20 00:28:52 localhost kernel: Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
Apr 20 00:28:52 localhost kernel: ... version: 0
Apr 20 00:28:52 localhost kernel: ... bit width: 40
Apr 20 00:28:52 localhost kernel: ... generic registers: 18
Apr 20 00:28:52 localhost kernel: ... value mask: 000000ffffffffff
Apr 20 00:28:52 localhost kernel: ... max period: 0000007fffffffff
Apr 20 00:28:52 localhost kernel: ... fixed-purpose events: 0
Apr 20 00:28:52 localhost kernel: ... event mask: 000000000003ffff
Apr 20 00:28:52 localhost kernel: NMI watchdog enabled, takes one hw-pmu counter.
Apr 20 00:28:52 localhost kernel: CPU 1 irqstacks, hard=d708e000 soft=d7090000
Apr 20 00:28:52 localhost kernel: Booting Node 0, Processors #1 Ok.
Apr 20 00:28:52 localhost kernel: Initializing CPU#1
Apr 20 00:28:52 localhost kernel: NMI watchdog enabled, takes one hw-pmu counter.
Apr 20 00:28:52 localhost kernel: Brought up 2 CPUs
Apr 20 00:28:52 localhost kernel: Total of 2 processors activated (12004.60 BogoMIPS).
Apr 20 00:28:52 localhost kernel: devtmpfs: initialized
Apr 20 00:28:52 localhost kernel: NET: Registered protocol family 16
Apr 20 00:28:52 localhost kernel: ACPI: bus type pci registered
Apr 20 00:28:52 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
Apr 20 00:28:52 localhost kernel: PCI: Using configuration type 1 for base access
Apr 20 00:28:52 localhost kernel: bio: create slab <bio-0> at 0
Apr 20 00:28:52 localhost kernel: ACPI: EC: Look up EC in DSDT
Apr 20 00:28:52 localhost kernel: ACPI: Interpreter enabled
Apr 20 00:28:52 localhost kernel: ACPI: (supports S0 S3 S4 S5)
Apr 20 00:28:52 localhost kernel: ACPI: BIOS offers _GTS
Apr 20 00:28:52 localhost kernel: ACPI: If "acpi.gts=1" improves suspend, please notify [email protected]
Apr 20 00:28:52 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Apr 20 00:28:52 localhost kernel: ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
Apr 20 00:28:52 localhost kernel: ACPI: No dock devices found.
Apr 20 00:28:52 localhost kernel: HEST: Table not found.
Apr 20 00:28:52 localhost kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Apr 20 00:28:52 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x18000000-0xfebfffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: [1002:5833] type 0 class 0x000600
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: reg 10: [mem 0xd2000000-0xd3ffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: reg 14: [mem 0xd0000000-0xd0000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: [1002:5838] type 1 class 0x000604
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.0: [1002:4347] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.0: reg 10: [mem 0xd0001000-0xd0001fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.1: [1002:4348] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.1: reg 10: [mem 0xd0002000-0xd0002fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: [1002:4353] type 0 class 0x000c05
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: reg 10: [io 0x8040-0x804f]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: reg 14: [mem 0x00000000-0x000003ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: [1002:4349] type 0 class 0x000101
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 20: [io 0x8060-0x806f]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.3: [1002:434c] type 0 class 0x000601
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: [1002:4342] type 1 class 0x000604
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.5: [1002:4341] type 0 class 0x000401
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.5: reg 10: [mem 0xd0003000-0xd00030ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.6: [1002:434d] type 0 class 0x000703
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.6: reg 10: [mem 0xd0003400-0xd00034ff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: [1002:5835] type 0 class 0x000300
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: [104c:8026] type 0 class 0x000c00
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: reg 10: [mem 0xd0208000-0xd02087ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: reg 14: [mem 0xd0200000-0xd0203fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:02.0: [14e4:4320] type 0 class 0x000280
Apr 20 00:28:52 localhost kernel: pci 0000:02:02.0: reg 10: [mem 0xd0204000-0xd0205fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: [10ec:8139] type 0 class 0x000200
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: reg 10: [io 0xa000-0xa0ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: reg 14: [mem 0xd0208800-0xd02088ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: [104c:ac54] type 2 class 0x000607
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: [104c:ac54] type 2 class 0x000607
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: reg 10: [mem 0x00000000-0x00000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.2: [104c:8201] type 0 class 0x000880
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.2: reg 10: [io 0xa400-0xa43f]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: [1033:0035] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: reg 10: [mem 0xd0206000-0xd0206fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: [1033:0035] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: reg 10: [mem 0xd0207000-0xd0207fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: [1033:00e0] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: reg 10: [mem 0xd0208c00-0xd0208cff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04]
Apr 20 00:28:52 localhost kernel: pci_bus 0000:00: on NUMA node 0
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
Apr 20 00:28:52 localhost kernel: vgaarb: loaded
Apr 20 00:28:52 localhost kernel: PCI: Using ACPI for IRQ routing
Apr 20 00:28:52 localhost kernel: PCI: pci_cache_line_size set to 64 bytes
Apr 20 00:28:52 localhost kernel: reserve RAM buffer: 000000000009f800 - 000000000009ffff
Apr 20 00:28:52 localhost kernel: reserve RAM buffer: 0000000017f70000 - 0000000017ffffff
Apr 20 00:28:52 localhost kernel: NetLabel: Initializing
Apr 20 00:28:52 localhost kernel: NetLabel: domain hash size = 128
Apr 20 00:28:52 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Apr 20 00:28:52 localhost kernel: NetLabel: unlabeled traffic allowed by default
Apr 20 00:28:52 localhost kernel: pnp: PnP ACPI init
Apr 20 00:28:52 localhost kernel: ACPI: bus type pnp registered
Apr 20 00:28:52 localhost kernel: pnp 00:00: [bus 00-ff]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000a0000-0x000bffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c0000-0x000c3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c4000-0x000c7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c8000-0x000cbfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000cc000-0x000cffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d0000-0x000d3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d4000-0x000d7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d8000-0x000dbfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000dc000-0x000dffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e0000-0x000e3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e4000-0x000e7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e8000-0x000ebfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000ec000-0x000effff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x18000000-0xfebfffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0cf8-0x0cff]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0000-0x0cf7 window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0d00-0xffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x0000-0x001f]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x0080-0x008f]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x00c0-0x00df]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x040b]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x04d6]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [dma 4]
Apr 20 00:28:52 localhost kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:02: [io 0x00f0-0x00fe]
Apr 20 00:28:52 localhost kernel: pnp 00:02: [irq 13]
Apr 20 00:28:52 localhost kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:03: [io 0x0070-0x0073]
Apr 20 00:28:52 localhost kernel: pnp 00:03: [irq 8]
Apr 20 00:28:52 localhost kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:04: [io 0x0061]
Apr 20 00:28:52 localhost kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:05: [io 0x0060]
Apr 20 00:28:52 localhost kernel: pnp 00:05: [io 0x0064]
Apr 20 00:28:52 localhost kernel: pnp 00:05: [irq 1]
Apr 20 00:28:52 localhost kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:06: [irq 12]
Apr 20 00:28:52 localhost kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x002e-0x002f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x004e-0x004f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x00b0-0x00b1]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0092]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0200-0x020f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c14]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c50-0x0c52]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c6c]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c6f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0cd6-0x0cd7]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x1080]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x8000-0x803f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x8800]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0xfe00]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0xfe10-0xfe11]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0x000e4000-0x000fffff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0x00100000-0x17ffffff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0xd0000000-0xd0000fff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0xfff80000-0xffffffff]
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0200-0x020f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c14] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c50-0x0c52] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c6c] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c6f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0cd6-0x0cd7] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x1080] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x8000-0x803f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x8800] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0xfe00] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0xfe10-0xfe11] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0x00100000-0x17ffffff] could not be reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0xd0000000-0xd0000fff] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (disabled)
Apr 20 00:28:52 localhost kernel: pnp 00:09: [io 0x0378-0x037f]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [io 0x0778-0x077b]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [irq 7]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [dma 1]
Apr 20 00:28:52 localhost kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
Apr 20 00:28:52 localhost kernel: pnp: PnP ACPI: found 10 devices
Apr 20 00:28:52 localhost kernel: ACPI: ACPI bus type pnp unregistered
Apr 20 00:28:52 localhost kernel: Switching to clocksource acpi_pm
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: BAR 15: assigned [mem 0x28000000-0x2fffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: BAR 1: assigned [mem 0x30000000-0x300003ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: BAR 1: set to [mem 0x30000000-0x300003ff] (PCI address [0x30000000-0x300003ff])
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Apr 20 00:28:52 localhosYou have to get an app to do this, luckily I found this...I
use it for my other monitors - 2nd Screen Saver runs an independent screen saver on the other screen(s)!
http://2ndscreensaver.blogspot.com/ -
[HOW-TO] Ati Radeon & Kernel 2.6 - Updated
[HOW-TO] Ati Radeon & Kernel 2.6
Updated on new ati-drivers 4.3.0
[CONTENTS]
1.1 Requirements
2.0 Compiling Kernel
2.1 Configuring Bootloader [GRUB]
3.0 Building & Generating modules
3.1 Pacthing modules
3.2 Compiling modules
3.3 Adding modules boot runlevel
4.0 fglrxconfig
4.1 Xorg.conf NEW!!
[1.1] Requirements
(All Intel & AMD users)
1. Ati Radeon 9xxx (Mine 9600 Sapphyre pro)
2. Kernel 2.8.x (Current 2.8.1)
3. wget, rpmunpack, cpio
4. PKGBUILD [FILE]
5. ati-drivers.install [FILE]
6. fglrx-2.6-vmalloc-vmaddr.patch New!!!
Those are code for listed files:
PKGBUILD New!!!
pkgname=ati-drivers
pkgver=3.11.1
pkgrel=1
pkgdesc="Proprietary (binary) drivers for ATI Radeon Cards."
url="www.ati.com/support/driver.html"
depends=('xfree86')
install="$pkgname.install"
source=(http://www2.ati.com/drivers/linux/fglrx-4.3.0-$pkgver.i386.rpm)
#md5sums=('9f7802ee0bbdeb5172673027056e789d')
# build-time deps: rpmunpack, cpio, gzip
build() {
cd $startdir/pkg
rpmunpack < $startdir/src/fglrx-4.3.0-$pkgver.i386.rpm | gzip -d | cpio -idmuv
chmod 755 -R .
mv opt/kde3 opt/kde
mkdir -p opt/gnome/share
mv usr/share/gnome/apps/ opt/gnome/share
rm -rf usr/share/gnome
usr/share/applnklib/modules/fglrx/{fglrx*.o,fglrx_info.txt}
usr/X11R6/bin/LICENSE.{GPL,QPL}
usr/X11R6/bin/*.bz2
ati-drivers.install New!!!
post_install() {
cat << EOF
NOTE
To create an fglrx module for your system, do:
cd /lib/modules/fglrx/build_mod
./make.sh
cd ..
./make_install.sh
Make sure you have your full kernel tree at /usr/src/linux
Then initialize "fglrxconfig" to create an XF86Config
for your graphics card.
EOF
post_upgrade() {
/bin/true
pre_remove() {
/bin/true
op=$1
shift
$op $*
fglrx-2.6-vmalloc-vmaddr.patch New!!!
--- firegl_public.c 2004-03-17 17:00:29.000000000 -0500
+++ /lib/modules/fglrx/build_mod/firegl_public.c 2004-07-18 16:09:46.000000000 -0500
@@ -2010,8 +2010,8 @@
pMmPage = virt_to_page(kaddr);
#endif /* LINUX_VERSION_CODE < 0x020400 */
- atomic_inc(&(pMmPage->count)); /* inc usage count of page */
+// atomic_inc(&(pMmPage->_count)); /* inc usage count of page */
+ get_page(pMmPage);
#if LINUX_VERSION_CODE >= 0x020400
// __KE_DEBUG3("vm-address 0x%08lx => kernel-page-address 0x%pn",
// address, page_address(pMmPage));
[2.0] Compiling kernel
<*> MTRR
e poi
<M> /dev/agpgart (AGP Support)
< > ALI chipset support
< > ATI chipset support
< > AMD Irongate, 761, and 762 chipset support
< > AMD Opteron/Athlon64 on-CPU GART support
< > Intel 440LX/BX/GX, I8xx and E7x05 chipset support
< > Intel i865 chipset support
< > NVIDIA nForce/nForce2 chipset support
< > SiS chipset support
< > Serverworks LE/HE chipset support
<M> VIA chipset support
< > Transmeta Efficeon support
[*] Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)
< > 3dfx Banshee/Voodoo3+
< > 3dlabs GMX 2000
< > ATI Rage 128
< > ATI Radeon
< > Matrox g200/g400
< > SiS video cards
make dep && make clean bzImage modules modules_install
[/code]
when finished,mount boot partition (if not already mounted)
[code]
mount /boot
[/code]
and copy kernel image to the boot directory, so the new kernel loads after computer restart. Pay attention to not overwrite existent kernels images in boot partition. For security issues rename it as ***_new.
[code]
cp arch/i386/boot/bzImage /boot/vmlinuz_new
[/code]
[2.1] Configuring Bootloader [GRUB]
Edit your boot-loader config file.
I currently use grub instead of lilo.
[code]
nano /boot/grub/menu.lst
[/code]
Add a new sub-menu (this is an example) Check on the forum how to set-up a bootloader).
[code]
# (0) Arch Linux
title Arch Linux [/boot/vmlinuz_new]
root (hd0,3)
kernel (hd0,1)/vmlinuz_new root=/dev/discs/disc0/part4 ro
[/code]
REBOOT
[3.0] Building ati-drivers
Make a directory under /var/abs/local called ati
[code]
mkdir /var/abs/loca/ati
[/code]
copy in it the two files PKGBUILD ati-drivers.install
[code]
cp /path/to/file/PKGBUILD /var/abs/local/ati
cp /path/to/file/ati-drivers.install /var/abs/local/ati
[/code]
start building package
[code]
makepkg -c
[/code]
if all goes well, this will be the output
[code]
[root@CippaLippa ati]# makepkg -c
==> Making package: ati-drivers
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> .......
==> .......
==> Compressing man pages...
==> Stripping debugging symbols from libraries...
==> Stripping symbols from binaries...
==> Generating .PKGINFO file...
==> Copying install script...
==> Generating .FILELIST file...
==> Compressing package...
==> Cleaning up...
==> Finished making: ati-drivers (Tue Feb 10 15:11:13 CET 2004)
[root@CippaLippa ati]#
[/code]
It downloads necessary files and generates a file called ati-drivers-3.9.x.pkg.tar.gz
Install it using:
[code]
pacman -A ati-drivers-3.x.x.pkg.tar.gz
[/code]
This installation generates a folder in /lib/modules/fglrx
Change directory
[code]
cd /lib/modules/fglrx
[/code]
[3.1] Pacthing modules
To patch modules simply copy the two files .patch listed on top in this directory. Intel users must only install fglrx-2.6-vmalloc-vmaddr.patch, AMD users both.
[code]
cp /path/to/patch/fglrx-2.6-vmalloc-vmaddr.patch /lib/modules/fglrx
[/code]
change directory
[code]
cd build_mod
[/code]
to patch the file firegl_public.c
[code]
patch -b firegl_public.c ../fglrx-2.6-vmalloc-vmaddr.patch
[/code]
It's time to compile the modules
[code]
sh make.sh
[root@CippaLippa build_mod]# sh make.sh
ATI module generator V 2.0
==========================
initializing...
probing for VMA API version...
cleaning...
patching...
make[1]: Leaving directory `/usr/src/linux-2.6.x
build succeeded with return value 0
duplicating results into driver repository...
done.
==============================
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
==============================
[/code]
change directory as you see on screen
[code]
cd /lib/modules/fglrx
[/code]
and compile in
[code]
sh make_install.sh
[/code]
if will be no errors in output, module fglrx were perfectly compiled in /lib/modules/2.6.x/kernel/drivers/char/drm/ and named "fglrx.ko"
[3.2] Adding modules boot runlevel
open /etc/rc.conf
[code]
nano /etc/rc.conf
[/code]
go to line MODULES= and add
[code]
agpgart via-agp fglrx rtc <== make sure always in this order
[/code]
(if your motherboard is "VIA" equipped, else check what do you have: the same configured in kernel under /dev/agpgart (AGP Support)
[4.0] fglrxconfig
Ati-drivers comes with a modified xf86config, utility to generate XF86config files.
Run
[code]
fglrxconfig
[/code]
and a welcome screen appear
[code]
==============================================================================
ATI - FIRE GL - BE THE CREATOR
==============================================================================
This program will create the ATI "XF86Config-4" file
- based on your selections - for the below listed boardtypes...
- ATI Radeon 8500 / 9100
- ATI FireGL 8700 / 8800 / E1
- ATI FireGL T2
- ATI Radeon 9000
- ATI Radeon 9200
- ATI Radeon 9500
- ATI Radeon 9600
- ATI Radeon 9700
- ATI Radeon 9800
- ATI FireGL Z1 / X1 / X2
- ATI Mobility M9
- ATI Mobility FireGL 9000
- ATI Mobility M9PLUS
The "XF86Config-4" file usually resides in /etc/X11.
Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort.
[/code]
follow the on-screen steps leaving default settings. Configure only mouse, keyboard, screen frequencies and resolution. At least when prompt for:
[code]
External AGPGART module:
external agpgart module execute this on the commandline (as root):
/sbin/insmod agpgart
or alternatively configure your system to auto load the module.
Do you want to use the external AGP GART module (y/n)? [y]
[/code]
be sure to answer "YES".
[4.1] Xorg.cong New!!!
Xorg configuration file, resides in /etc/X11.
It is XF86config renamed and Will replace soon it, with the new video system based on Xorg.
This is my xorg.conf file:
[code]
Section "dri"
Mode 0666
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/usbmouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31-96
VertRefresh 55-160
Option "DPMS"
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
#Option "NoDDC"
Option "no_accel" "no"
Option "no_dri" "no"
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4150
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
[/code]
REBOOT
Start in X with kde, gnome or othet window manager.
If X does not start you maybe made something wrong, retry from the beginning. Else if it starts, check if DRI os working
[code]
fgl_glxgears
[/code]
if it is working, a rotating cube will appear in a new windows, and if it is so.....
ENJOY
**SORRY FOR MY ENGLISH **Using kernel 2.6.2
I'm starting over again but now cannot get the PKGBUILD to complete. I had this problem this morning as well, but after editing the PKGBUILD file did eventually get it to complete. This is the output of makepkg -c using the PKGBUILD as posted:
[root@Arch2 ati]# makepkg -c
==> Making package: ati-drivers (Wed Feb 11 16:11:02 GMT 2004)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Downloading fglrx-glc22-4.3.0-3.2.8.i586.rpm
--16:11:02-- http://www2.ati.com/drivers/linux/fglrx … 8.i586.rpm
=> `fglrx-glc22-4.3.0-3.2.8.i586.rpm'
Resolving www2.ati.com... 62.25.100.58, 62.25.100.32
Connecting to www2.ati.com[62.25.100.58]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4,365,039 [audio/x-pn-realaudio-plugin]
100%[====================================>] 4,365,039 55.23K/s ETA 00:00
16:12:27 (50.80 KB/s) - `fglrx-glc22-4.3.0-3.2.8.i586.rpm' saved [4365039/4365039]
==> Validating source files with MD5sums
fglrx-glc22-4.3.0-3.2.8.i586.rpm ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
./lib/modules/fglrx/build_mod/2.6.x/Makefile
./lib/modules/fglrx/build_mod/agp.h
./lib/modules/fglrx/build_mod/agp3.c
./lib/modules/fglrx/build_mod/agp_backend.h
./lib/modules/fglrx/build_mod/agpgart.h
./lib/modules/fglrx/build_mod/agpgart_be.c
./lib/modules/fglrx/build_mod/firegl_public.c
./lib/modules/fglrx/build_mod/firegl_public.h
./lib/modules/fglrx/build_mod/i7505-agp.c
./lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC2
./lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC3
./lib/modules/fglrx/build_mod/make.sh
./lib/modules/fglrx/build_mod/nvidia-agp.c
./lib/modules/fglrx/fglrx.2.4.18-17.7.x.o
./lib/modules/fglrx/fglrx.2.4.18-17.8.0.o
./lib/modules/fglrx/fglrx.2.4.20-6-SMP.o
./lib/modules/fglrx/fglrx.2.4.20-6.o
./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.ent-SMP.o
./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.ent.o
./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.entbigmem-SMP.o
./lib/modules/fglrx/fglrx_info.txt
./lib/modules/fglrx/make_install.sh
./opt/kde3/share/applnk/fireglcontrol_kde3.desktop
./usr/X11R6/bin/LICENSE.GPL
./usr/X11R6/bin/LICENSE.QPL
./usr/X11R6/bin/fgl_glxgears
./usr/X11R6/bin/fglrx_xgamma
./usr/X11R6/bin/fglrxconfig
./usr/X11R6/bin/fglrxinfo
./usr/X11R6/bin/fireglcontrol.qt2.gcc2.96.bz2
./usr/X11R6/bin/fireglcontrol.qt3.gcc3.2.bz2
./usr/X11R6/bin/fireglcontrol.qtstatic.gcc2.96.bz2
./usr/X11R6/include/X11/extensions/fglrx_gamma.h
./usr/X11R6/lib/libGL.so.1.2
./usr/X11R6/lib/libfglrx_gamma.a
./usr/X11R6/lib/libfglrx_gamma.so.1.0
./usr/X11R6/lib/modules/dri/fglrx_dri.so
./usr/X11R6/lib/modules/drivers/fglrx_drv.o
./usr/X11R6/lib/modules/linux/libfglrxdrm.a
./usr/include/GL/glxATI.h
./usr/share/applnk/fireglcontrol.kdelnk
./usr/share/gnome/apps/fireglcontrol.desktop
./usr/share/icons/ati.xpm
./usr/share/pixmaps/ati.xpm
./usr/src/ATI/fglrx_panel_sources.tgz
./usr/src/ATI/fglrx_sample_source.tgz
21763 blocks
/usr/bin/makepkg: line 23: usr/share/applnklib/modules/fglrx/fglrx*.o: No such file or directory
usr/X11R6/bin/LICENSE.GPL: line 2: syntax error near unexpected token `('
usr/X11R6/bin/LICENSE.GPL: line 2: ` The Qt GUI Toolkit is Copyright (C) 1994-2000 Trolltech AS.'
/usr/bin/makepkg: line 25: usr/X11R6/bin/fireglcontrol.qt2.gcc2.96.bz2: cannot execute binary file
==> ERROR: Build Failed. Aborting...
[root@Arch2 ati]#
I seem to be going backwards!
Maybe you are looking for
-
My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started eve
-
CF11 : cflogin doesn't "stuck" after session/login timeout
Hi, Since migrating from CFMX7 to CF11 we are experiencing some weird failure with cflogin (using session or cookie storage). Basically when we log-in on the application after a session/client timeout the first login doesn't last for longer than the
-
I am running a Mac Mini with 2.53 Intel Core2 duo and OS X 10.6.4 with 4gb ram. The question I have is that when i boot the computer with my external drives plugged in it hangs on the blue screen. When i un plug my external drives it boots fine..any
-
so i was downloading ios 7 and it turned my iphone off and now it say i need to plug into itunes help please
-
ITunes Library Pointing to Time Machine Backup
I got a message this morning that iTunes couldn't sync any audio files to my iPhone because the files were in an unsupported format. When I investigated, I found that my iTunes music library was pointing to files within my TimeMachine Backup (a spars