Gpu vs monitor

If I have three dedicated gpus but only two monitors, would the third be a waste?

asandwhich wrote:
I have two monitors, and I'm going to get two nvidia cards that can be sli 'd and i have one card extra. If I put the first two cards into sli and then just leave the third as is, would I just plug my main monitor into the first one and then plug the second into the third and the first two control the main and the third control the secondary?
In theory, yes. I've never encountered a multi-monitor SLI setup but I have read is that you can have multiple monitors running off of multiple cards when SLI is used as it's a feature that goes on and off. However, I do not know what the third card will do exactly but I would assume it will work normally. I know the multi-monitor feature went to the toilet with Vista, compared to how well it was implemented in XP, so I can't really say it will work exactly as you want it to.

Similar Messages

  • Hardware config and componenets : raid, gpu and monitor choices

    Right,
    I've almost finalised my decisions about a new build I'm putting together to use cs4 design premium prgrammes (mainly photoshop, InDesign, Illustrator, fireworks and flash) and in the near future 3d Max and possibly a video editing programme.
    There are some things I'm stuck with for now; Motherboard and cpu, and some things I have a few questions about: raid 0,  gpu and monitor choices.  I appreciate this is a long post - but any feed-back would be appreciated.
    MOTHERBOARD AND CPU
    The motherboard and cpu were originally intended for a gaming pc:
    MSI DKA790GX Platinum Motherboard
    AMD phenom x4 9950 black edition
    This motherboard and cpu are far better than any other  I've had at my disposal when it has come to working with  adobe programmes (CS2).  So although
    - I will only be able to go up to 8gb of ddr2  800mhtz ram (apparently the motherbioard  becomes unstable with 8 gb 1066 ddr2)
    - I  do not have a motherboard that takes 2  6+ core cpus
    From what I've seen of reviews on these components, at the moment,  I'm quite happy with what I've got for both cs4 and 3d max use.
    Besides, in the last few weeks I've learnt there are other things I can do to get maximum leverage out of a build comprising  these components.
    HDD CHOICE FOR RAID 0
    I've read Harms generic guideline for disk setup here
    http://forums.adobe.com/thread/662972?start=0&tstart=0
    I gather that this guide is principally for optimum running when video editing. But I also gather that the performance enhancement of raid 0 compared to no raid will be beneficial for both  photoshop and 3d Max.  4 discs with 2 in raid is what I was thinking of going for.
    Discs I have or am thinking of buying:
    1.  I have 1 160gb WD ide 8mb cache hdd WD1600AAJB
    2.  I have 1 500gb WD Caviar blue SATA 16 mb cache hdd (WD500AAKS)
    3.  For the raid I'm thinking of buying 2x 1tb Samsung SpinPoint F3 7200rpm 32mb cache drives for £45.74 each
    These are obviously highly rated as raid drives in these forums and I can't find anything smallar than a 1tb version of these drives at the shop I plan to order from – or is 1tb all they come in?
    1st disc for OS and programmes
    When going to the trouble of setting up raid is it acceptable to use an ide disc for the OS and programmes? I ask this because the 160gb WD hdd mentioned above has hardly been used....
    If the ide drive is not approved of  I'm thinking of buying either
    1.  A 500gb Seagate Barcude 7200.12 16mb cache sata 2 drive for £29.73 or
    2.  A 500gb Hitachi Deskstar 7K1000.C 7200rpm 16mb cache driver for £29.30 or
    3.  A  160gb samsung SpinPoint 7200rpm 8mb cache drive for 24.96
    I know the Seagate and Hitachi  are huge drives for the principal purpose of storing the OS and programmes but they both have 16mb cache and are only a few pounds more than the 160gb Samsung drive with only 8mb cache
    Or
    considering I'm going for F3 spinpoint for the raid discs would it be better, in terms of compatibility between the drives, to go for a spinpoint 8mb cache for the OS and programme discs
    What should be my biggest concern here – compatibility between the discs or a higher cache on the disc  - or considering they are all the same speed (7200rpm) does the cache not matter that much?
    2nd disc for page file, media cache
    I was thinking of dedicating the 500gb WD I have for these purposes.  I've read in this forum that the WD drives are not that reliable when it comes to raid arrays – apart from that they seem to have a good reputation.
    3-4th discs for raid 0
    My mind is pretty much made up on the Samsung SpinPoint F3's
    Partitions
    Because there are a huge number of gb's in this set up I'm thinking of  partioning the 1st and second discs so that in addition to using them for 'the operating system and programme files' and 'page file and media cache' their second partitions can be used to backup the data stored in the raid array.
    Is it good practice to partition dedicated discs in this way?
    THE GPU
    Due to it's reletive cheapness, wide spread use and endorsement amongst gamers and workstation users alike, first of all I was swayed towards the 480GTX and using quadro driver hacks.  But I couldn't get the number of ''risk factor' forum threads concerning making a GTX think its a quadro – particularly when it comes to using 3d max - out of my head.  Even without the hacks there are a high percentage of grissly stories out there concerning the 480s and 3d max compared to workstation cards and 3d max.  So I've decided that because I have the budget to get a workstation card (an ATI V7800) for 'just' £134 more than a GTX480 (£424 compared to £293) then for the peace of mind of more stable drivers, when getting to grips with a complex new programme, I might as well go for it and pay that bit extra.
    I've had a good look at both the ATI V7800 and the PNY QUADRO 4000.... the differences between stream versus cuda and how these cards perform when rendering 3d programmes.....  I  started vearing towards the V7800 when I realised that when it came to rendering it was being compared very favourably with the quadro FX5800 let a lone the much cheaper quadro 4000.... Plus with the disc set up I am now thinking of I can buy the V7800 plus all the discs talked about above for £10 less than I can find the quadro 4000 for alone.
    The only thing I'm concerned about is the V7800's compatibility with the cs4 design premium suite.
    This page indicates that although some of these cards were released after cs4 they are supported by it.
    http://kb2.adobe.com/cps/405/kb405445.html
    Would it be wrong of me to suppose that, because the new V7800 is a work station graphics card, it will  be supported by cs4?
    What difference will it make if it isn't supported?
    Having said that the quadro 4000 isn't listed as supported on this page either....
    What would be your choice between the quadro 4000 and ATI V7800?
    THE MONITOR
    The monitor I'm looking at the 22” Dell 2209WA  eIPS..... Although older (2008 vs 2009) the slightly larger 24”Dell 2408WFP has also caught my eye due to the higher contrast ratio (1300:1 vs 1000:1) and that this increased contrast ratio means it is capable of displaying 110 percent of the NTSC gamut as opposed to 86% with the the 2209WA.
    I'm familiar with monitor on the 2006 dell XPS M1710  laptop and am very impressed with colour fidelity.  The 2408WFP does require more calibration tweaking by the sound of it....
    Anyone any experince of either of these monitors?
    I'm off to the gym for an hour or so - I'll be back in a couple of hours

    My strong advice:  Don't skimp on price on hard drives.
    Get high MTBF RAID edition drives (e.g., Western Digital RE-series drives).
    http://www.wdc.com/en/products/products.aspx?id=30
    In my main workstation I currently have two 1 TB WD RE3 drives that have been spinning in a RAID 0 configuration 24/7 with ZERO problems for a year now.
    I figure one wants to minimize the chance of losing one's data down the road.  How much would it cost you in time, effort, and lost work to recover your data from a backup if you should lose your hard drive?
    Top-end drives can fail, sure, but the MTBF numbers say that the chances are much smaller than with "cheap" drives.  And the RAID edition drives have additional features, such as vibration reduction, that differentiates them from lesser drives.
    Ask yourself, why would one drive be cheaper than another?  Poorer quality materials?  Not as much quality control?
    Another bit of info:  Search this forum for "quadro".  It seems that these expensive video cards may be seeing more trouble with Photoshop than you might expect.  Some of the less expensive cards, that may have had more OpenGL testing (e.g., to support gaming) might be better choices for use with Photoshop.  Personally I prefer ATI.
    -Noel

  • Titanium Pro, single GPU, two monitors - SERIOUS static/popping issues

    So here is my setup: Creative X-Fi Titanium Pro, Logitech Z-2300 speakers, Turtle Beach 5. headset (splitters between them to output audio to both), XFX GTX 285, DFI LanParty P45-T2RS mobo, Samsung 206BW monitor, and here's the new addition: Samsung 640 series 32" LCD television connected via DVI-to-HDMI cable. I have the audio out from the TV also spliced into the feed for the speakers.
    Pretty much from day one with the new TV I've had issues with loud static, and random (left to right channel) popping sounds coming from the speakers and headphones, so it has to be coming from the sound card. It only seems to happen when I have the TV on as a second monitor. I first noticed it while trying to watch a movie in Windows Media Player on the TV, then it started being prevalent while playing Call of Duty 4 on the 20" monitor with the TV on with my Xfire, Ventrilo, and Firefox open. It seems like the extra duty the GPU is putting out interferes with the sound card or something. I've tried moving them both to a different slot but it didn't make any difference.
    Does anyone know of anything else that could be causing this? Maybe a power issue? I've got a 650 watt PSU (Seasonic S2). I'm thinking I might just have to throw in the towel and junk my $30 sound card.... ugh.
    p.s. I've also got an issue to where if I leave it in one audio mode (Entertainment or Game) for more than a couple hours the sound goes completely to s*** and I'm forced to switch modes and go back, forcing me to close any and all sound producing applications (iTunes, WMP, Firefox) otherwise they freeze. For example I like to play a playlist in iTunes as I go to sleep, but when I wake up and try to play something its completely garbled and staticky (loud too)[email protected]

    So here is my setup: Creative X-Fi Titanium Pro, Logitech Z-2300 speakers, Turtle Beach 5. headset (splitters between them to output audio to both), XFX GTX 285, DFI LanParty P45-T2RS mobo, Samsung 206BW monitor, and here's the new addition: Samsung 640 series 32" LCD television connected via DVI-to-HDMI cable. I have the audio out from the TV also spliced into the feed for the speakers.
    Pretty much from day one with the new TV I've had issues with loud static, and random (left to right channel) popping sounds coming from the speakers and headphones, so it has to be coming from the sound card. It only seems to happen when I have the TV on as a second monitor. I first noticed it while trying to watch a movie in Windows Media Player on the TV, then it started being prevalent while playing Call of Duty 4 on the 20" monitor with the TV on with my Xfire, Ventrilo, and Firefox open. It seems like the extra duty the GPU is putting out interferes with the sound card or something. I've tried moving them both to a different slot but it didn't make any difference.
    Does anyone know of anything else that could be causing this? Maybe a power issue? I've got a 650 watt PSU (Seasonic S2). I'm thinking I might just have to throw in the towel and junk my $30 sound card.... ugh.
    p.s. I've also got an issue to where if I leave it in one audio mode (Entertainment or Game) for more than a couple hours the sound goes completely to s*** and I'm forced to switch modes and go back, forcing me to close any and all sound producing applications (iTunes, WMP, Firefox) otherwise they freeze. For example I like to play a playlist in iTunes as I go to sleep, but when I wake up and try to play something its completely garbled and staticky (loud too)[email protected]

  • IMac 21.5 (late 2009 ) supports GPU Sensor Monitoring?

    I've had this question up on the Intel Mac forum for a number of days now without being able to resolve this issue. I'm posting it here on the chance someone who hasn't visited that forum may come along who may be experiencing this.
    I'm trying to determine if this computer doesn't support GPU monitoring for the Nvidea GeForce 9400 (I think it probably does for the ATI Radeon card), or if I have a defective sensor. I've reset the SMC to no effect and run the Hardware Test, which found no problems.
    I'd really appreciate knowing if anyone who has an iMac 21.5 or 27 (late 2009, i.e. not the models just released), or any other model with this graphics chipset, and running a program that reads data from the sensors, such as Hardware Monitor (or Temperature Monitor), iStat Menus (or Pro) or anything similar, is not (or is) getting any sensor readings for the GPU.
    (I've been in touch with the developer of Hardware Monitor who was not able to answer this question definitively.) Thanks.

    Last try.
    I'd really appreciate knowing if anyone who has a late 2009 iMac 21.5 or 27... is not (or is) getting any (temperature or load) readings for the GPU / Graphics Card (Nvidea GeForce 9400.)

  • CPU/GPU temperature monitoring

    I have a T400-2764CTO ThinkPad and am interested in monitoring temps in the task bar area.
    Any experience with freeware tools that have been successfully used for monitoring temps on the T-series?  I'm aware of Tpfancontrol, but I'm not interested in controlling fan speed, just want to conveniently monitor CPU/GPU/HDD temps.
    Thanks...
    T400 2764CTO
    Windows 7 x64

    TPFanControl will monitor all temps for you.
    http://www.staff.uni-marburg.de/~schmitzr/donate.html  The latest version is on the bottom of the page.
    Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
    Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

  • HP DisplayPort To VGA Adapter (GPU to Monitor)

    Can i use this one, this one or this one to connect non HP components like: Radeon graphic card with DisplayPort and Asus monitor with VGA connector?

    Hello coffeecup332,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP Elitebook is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    I hope this helps!
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • 5-screen (multi-monitor) nVidia xorg.conf -- my setup

    Hi. I would like to share my xorg.conf, since it took forever to get right.
    There isn't a lot of information out there for folks using > 2 monitors, or several graphics cards, or esoteric setups including rotation etc. I hope this will be useful; I wouldn't mind contributing to the wiki if anybody thinks it might be useful.
    So first up: hardware. I have
    nVidia GeForce GTX 550 Ti connected to a 24" monitor (in the middle)
    nVidia GeForce 210 connected to two 19" monitors, rotated into portrait (on either side of the 24")
    nVidia GeForce GT 440 connected to two 15" monitors (above the 24")
    here is a picture of the monitors, click for a bigger version
    Drivers: I'm using the official nVidia drivers, I couldn't get nouveau to work. Since I am using Xinerama, the XRandR extension isn't loaded -- therefore my setup won't be suitable for people whose screen configuration changes dynamically. But I'd prefer not to use Xinerama, and even to use nouveau if possible; if anybody has a similar configuration working with nouveau, please share
    Finally, the actual config itself. Here it is on pastebin.
    Rotation
    The correct way to rotate monitors in xorg.conf is through the metamodes option of the Screen section. On my Screen 2 and 4 (the two 19" monitors), you can see that
    { Rotation = left }
    has been added at the end of the metamodes option. Contrary to some other guides floating around, it is not necessary to specify these options:
    # Unnecessary
    Option "RandRRotate" "on"
    Option "Rotate" "right"
    I believe these come from an earlier version of Xorg. They don't have any effect when I put them in my xorg.conf, using Xorg 1.12.4 and nVidia 304.43.
    Even when I specified rotate in metamodes, my monitors didn't appear to rotate because I had originally written
    Option "metamodes" "CRT-1: nvidia-auto-select +0+0 { Rotation = left} "
    instead of
    Option "metamodes" "DFP-1: nvidia-auto-select +0+0 { Rotation = left} "
    This just made rotation fail silently, with no error message. Make sure to specify DFP if you're using a digital output (DVI, HDMI, DP) and CRT only if you're using a VGA output on your graphics board.
    Tips
    When you're testing out a new Xorg.conf, you can use
    startx -- :1
    to start a new X server without killing the current one. See if your configuration works, then switch back to your original X server by pressing Cmd-Alt-F7.
    You should also keep a log of different configurations you have tried. You can use a version control system like git to track changes to your Xorg.conf; make sure you document every change you have made, and why, it can prove invaluable later on.
    Feel free to ask about this setup. I would like to know something: what is the function of the Screen option in the Device section? On the four Device entries for my nVidia 210 and 440 cards, there is an option called Screen; when I take it out, the setup breaks. Why are they there? And why do they not map to the screen numbers in the Screen section? (They are numbered 0, 0, 1, 1 rather than 1, 2, 3, 4)

    Thank you for the reply. I read the wiki page, but unfortunately I am still struggling with my two nvidia gpu, three monitor setup.
    The red arrows show the pointer progression through the monitors (moving mouse left to right). When the cursor is on the top monitor, it becomes an X, and the screen is black.
    Here is the matching xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 331.67 (buildmeister@swio-display-x86-rhel47-08) Fri Apr 4 12:26:05 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "Acer X223W"
    HorizSync 31.0 - 83.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GT 610"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-1"
    Option "metamodes" "VGA-0: nvidia-auto-select +0+0, DVI-I-1: nvidia-auto-select +1920+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "CRT-1"
    Option "metamodes" "nvidia-auto-select +0+0"
    Option "SLI" "Off"
    Option "MultiGPU" "Off"
    Option "BaseMosaic" "off"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Based on this post on archlinux, I took a crack at matching the xorg.conf pattern above (monitor/device/screen sections) with my own. I took it as a victory that it actually didn't error (many xorg.conf experiments have in the last couple of days have). Here is my new xorg.conf with 3 screens/3 monitors/3 devices:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.67 (buildmeister@swio-display-x86-rhel47-08) Fri Apr 4 12:26:16 PDT 2014
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "dbe"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "leftAcer"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "rightAcer"
    VendorName "Unknown"
    ModelName "Acer G236HL"
    HorizSync 30.0 - 80.0
    VertRefresh 55.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "topAcer"
    VendorName "Unknown"
    ModelName "Acer X223W"
    HorizSync 31.0 - 83.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "geforce-9600-gt-0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "geforce-9600-gt-1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9600 GT"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Device"
    Identifier "geforce-gt-610"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GT 610"
    BusID "PCI:2:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "geforce-9600-gt-0"
    Monitor "leftAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-0"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-0"
    Option "MetaModes" "DFP: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "geforce-9600-gt-1"
    Monitor "rightAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-1"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-1"
    Option "MetaModes" "DFP-1: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "geforce-gt-610"
    Monitor "topAcer"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "DFP-0"
    Option "Stereo" "0"
    Option "nvidiaXineramaInfoOrder" "DFP-0"
    Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Disable"
    EndSection
    This what appears with the new xorg.conf:
    "leftAcer" and "rightAcer" appear, but nothing appears on "topAcer" (it appears not to be getting a signal from the gpu). I can move the mouse pointer between "leftAcer" and "rightAcer".
    Any help or advice would be greatly appreciated. Here are a few details about the hardware setup:
    GeForce 9600 GT is in the PCI:1 slot. It's DVI out is going to "acerLeft", it's VGA out is going to "acerRight".
    GeForce GT 610 is in PCI:2 slot. It's VGA out is going to "acerTop".
    thanks!

  • GPU Performance Experimental Feature won't detect GeForce 660 card

    I'm running an NVIDIA GeForce GTX 660 with the latest driver pack (just installed today) and Illustrator is telling me that "compatible GPU not found."  This card is listed in the required cards list (GPU Performance) and I've been thru all the troubleshooting procedures to no avail.  Any clue as to why Illustrator refuses to see my card??
    Additional specs:
    Windows 7 64-bit
    Intel Xeon E5-1620
    32GB RAM
    Any other info needed?  Please help!
    Thanks!

    Here's even more crazy... I'd say most of us in the Graphics/video industry use multiple monitors, and at a guess I'd say a lot of use have multipleGPUs to boost performance... but:
    Monitor
    GPU
    1
    Monitor
    2
    Monitors
    3 or more
    Monitors
    1 GPU
    Enabled
    Enabled
    Disabled
    2 GPUs
    Enabled
    Disabled
    Disabled
    3 or more GPUs
    Enabled
    Disabled
    Disabled
    I have a 21" LCD as my main monitor and a Wacom Cintiq 24HD running off two GTX580s... in order to get better performance from Illustrator, I must remove one of my GPUs... What the eff!?
    I tried sli, non-sli and non-sli with monitor in each card... I guess it's a no-go.

  • GPU acceleration not working when launched via document?

    When I open Illustrator alone, then open a file, I get GPU acceleration. (good)
    When I open Illustrator by double-clicking a file, I don't get acceleration. (bad)
    I'm happy that the latest update made GPU work when I have multiple monitors plugged in but there's still this little bug. One that I can work around but still, not something I imagine makers of the lofty CC should be plagued with.
    I'm seeing this behavior in Illustrator 18.1.1 64bit on Windows 8.1.

    Refer to https://helpx.adobe.com/illustrator/kb/gpu-performance-preview-improvements.html#main-pars _minitoc
    5. Monitors and GPU Cards
    The GPU Performance feature is automatically disabled under certain circumstances. Check the following table to look for a possible reason that could cause the GPU Performance feature to become disabled on your computer: 
    Monitor
    GPU
    1
    Monitor
    2
    Monitors
    3 or more
    Monitors
    1 GPU
    Enabled
    Enabled
    Disabled
    2 GPUs
    Enabled
    Disabled
    Disabled
    3 or more GPUs
    Enabled
    Disabled
    Disabled

  • The monitor profile "***" appears to be defective......

    This is an FYI for others trying to solve the problem I've been pulling my hair out over! I was receiving a warning on startup of Ps CS3 "The monitor profile 'LCD color management and conversion' appears to be defective. Please rerun your monitor calibration software". This was after using my EyeOne to calibrate my monitor. I've seen variations of this problem on various forums and websites, but none helped my particular problem.
    FINALLY, it occurred to me to check the default profile for my SECONDARY monitor! That one was using a stock profile that came with the monitor, but that was what was triggering the error message. Once I replaced that with the same profile as I created and was using on my primary monitor, Ps stopped displaying the warning.
    I hope this helps someone else! If I recall from months ago when I researched and bought my colorimeter, my model will only calibrate one monitor, so I can't use it to create a unique profile for the second monitor.

    OK, this is pretty funny...
    I'm having this same problem, and can't remember how I solved it before, searching all over the internet and Adobe Forum, and finally find this post.  Finally, a post that seems very similar to my problem!
    HELLO!  I posted it!!!!  Even if it never was of any help to anyone else, it helped me solve the problem again!
    This time, problem arose because of having to remove and reinstall GPU and monitor drivers.  Other things have change too, since my original post.  I'm now on Win7 64bit, just bought PS CS5, and different GPU.....but none of those are a factor.
    Even though I had just recently calibrated my primary monitor with Eye-One, using the advanced mode; I did it all over again, and determined that it was set as the default profile.
    I almost thought the fix didn't work this time around, but upon trying it again, I realized I wasn't paying close enough attention.  I right-clicked the desktop to get to screen resolution, and clicked on advanced properties after selecting monitor #2.  Color management tab>click on color management button>devices tab.  Alas, I thought, they're the same list of profiles, and the newest profile is set as the default.  It wasn't until the second time around that I realized that, even though I had started out selecting monitor #2 as the one I wanted to change, this dialog I found myself in has a drop-down for monitor, and it was displaying the profiles for the primary.
    Once I changed that to show the secondary monitor, the problem was evident: the only profile showing was the dreaded "LCD color management and conversion" profile.  Where it comes from, and why PS doesn't like it, I have no idea.  As far as I can tell, it's not Dell's.   I also had to check the box "Use my settings for this device" before I was able to add any new profiles.  I added a few new ones from the list after clicking on "add", including the profile for my primary.  Since my secondary is not color critical and is just for tool pallettes, I just chose one that looked similar to my primary's (the one for the primary was too cool).
    Reopened PS, and it was happy as a clam!

  • Ultra low frame rates, GPU not being used

    While using After effects during playback, I am getting about 10-4 FPS. With frame rates that low it's basically impossible to make any videos. I am using a desktop gadget to monitor GPU usage. I noticed that my GPU is not being used at all, 0% usage and only a few MB of memory being consumed out of 4 gigs of GDDR5. I called Adobe customer service and basically I was told that After effects only uses as much GPU power as it needs to. Ok, that makes since and If I was getting 30+ FPS then I wouldn't care, but it seems odd to me that After effects is running so poorly and not using my GPU. If my GPU was maxed out, then I would understand I need a more powerful GPU to improve frame rates, but since my GPU is not being used at all, not even a bit then I don't think it's a hardware problem, but some sort of setting that is not right. The only thing I could think of is that my HDD is pretty slow or that GTX cards are not designed to run Open Gl and maybe that's the problem, but I double checked the Adobe website and GTX cards are supported.  Also I downloaded some other GPU monitoring software to double check and both the Desktop gadget and the GPU software monitor show no activity. I am really new to After effects.  Thanks for help.
    Specs:
    64bit win7
    8 gigs
    760
    4670k

    That's because it appears that you're using AE incorrectly.  I bet you're assuming that if you hit the space bar, AE plays back video like a video editing application.
    Well, it doesn't.
    AE is an effects, motion graphics and compositing application.  It's designed to do completely different things than an editing application does.  Hence, it doesn't work like an editing application does.  For example, IT DOESN'T PLAY BACK VIDEO IN REAL TIME.  That's why you got that getting started link.  At least do yourself the favor of reading how AE works. 
    And for the purposes of this thread, it wouldn't hurt you to learn how to RAM Preview: hit zero on the numeric keypad and see what happens.  It's just one of the many basics you need to know before you jump into the deep end of the pool with AE.

  • No voltage monitoring AB beta 18, GTX 760 Hawk

    I noticed something with Afterburner Beta 18, when I use the "extended MSI" setting, I will lose my GPU voltage monitor. I'm using the GTX 760 hawk, what gives? I'm at a loss..

    Thanks. My N760 Hawk core is pretty much at the wall with the factory OC. Memory on the other hand can bench up to +550. 

  • GPU fan of Satellite P100-145 is not running!

    Hi
    Has there been a solution to this problem yet? It only started since I upgraded my bois to 3.80. The base gets so hot on the right hand side and it's even radiating heat through the top panel on which my wrist/hand rests.
    Not to mention it will slowly by destroying the components inside. I was running a game earlier to test the fan and it just would not turn on once! It got so hot!! Atleast 100 deg/c!!
    I am wanting to downgrade the bios but cant find it anywhere on toshibas sites. Can anyone please provide me with details on how to obtain an earlier bios? 2.40 would be great. Back to factory settings and more importantly the FAN RUNNING!
    I have the Satellite P100-145. It was great at first... until I found problems due to the design.
    Please help

    As far as I know many notebooks series supports only one cooling module, CPU cooling module.
    I dont know any GPU temp monitoring software. I use the Everest home edition and this software monitors HDD and CPU temperature.
    But listen buddy, the Toshiba graphic driver supports an overheating protection! If the GPU temperature rises to a higher step, the graphic driver will decrease the GPU performance and the temperature will go down. This is one reason why you should use the Toshiba graphic drivers ;)

  • Performance reduced under Bootcamp after EFI update on Macbook Pro Retina

    after i upgraded EFI on my retina macbook pro the proformence reduced to unusable. under heavy load under bootcamp windows7. the cpu clock drops and as well as cpu clock. this is the screen shot of gpu clock monitoring from windows u can see the gpu clock is running at 270Mhz at most of the time and trying to be back to 725Mhz(yea, not 900Mhz!) when im running a graphic benchmark at same time cpu will run about 1.1Ghz as well. i noticed that it will run 10-20sec normally then CPU and GPU clock will start dropping. It's almost like speedstep is programmed backwards. My CPU is constantly running at 3.1-3.2GHz, and then as soon as a game loads, it drops to 1.2GHz. I've lost track of how many times I reset the SMC  reseting SMC PRAM, reinstalling windows using Bootcamp or even erease the entire drive and start over from network recovery MacOS did not solve this problem. so all the recent games like COD MW3, Starcraft II, BF3,or D3 will only run about about 10 fps as i was playing them with no ploblem before the EFI update.
    this is killing me! please help.
    im in NY, in this season i dont think is the overheating problem. when i check the temperature, it stays about 80C (fans will run about 4k rpm). but some time heavy loaded Mac OS cpu is about 90 degree but only with 3k rpm fan kicked in.
    i did search online, seems that some other people have the same problem with rMBP or MBA 2012.
    anyone knows if i take my macbook pro to the store, will those people work at genuines bar help me with this "windows" problem?
    thanks!

    Hey Shadowyani, please take a time and fill a bug report at http://developer.apple.com/bugreporter/ . The machine is useless for me as it is now because I develop and use very GPU/CPU demanding scientific applications, after the update my realtime applications are completely useless as they drop from something like 25fps to 9 fps even on Mac OS X (no SMC reset fixed the issue). In bootcamp the situation is worse, my software runs at 4 fps and gaming turns to be impossible to play as well.
    Please let Apple know about the problem, fill a bug report, even if SMC reset once in a while fixed the issue for you (this is not a common behaviour and must be fixed). We paid the price for cutting edge technology.
    Apple shall not do a downgrade of the system after few weeks, remember that most of reviews and benchmarks were done BEFORE the EFI Update, so people are being fooled by Apple in this sense.

  • [SOLVED]Terminal at Lower Resolution

    Hello,
    I am on Arch linux with Gnome (GDM) and I have a question-
    1. When there was no Gnome. I couldn't get my resolution to be my native one. That login screen text was huge(resolution was low). Initially it was all good(when I was using nouveau), till I installed nvidia-340xx. If it makes sense. How to know if I have Optimus enabled ? (I didn't follow optimus part of the wiki and I ASSUMED I don't have optimus)My laptop is Toshiba Satellite - A665-S6070
    I also did
    Tips and tricks
    Fixing terminal resolution
    Transitioning from nouveau may cause your startup terminal to display at a lower resolution. For GRUB, see GRUB/Tips and tricks#Setting the framebuffer resolution for details.
    GNU nano 2.2.6 File: /etc/X11/xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 340.76 (buildmeister@swio-display-x86-rhel47-01) Thu Jan 22 12:12:24 PST 2015
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 75.0
    VertRefresh 43.0 - 72.0
    Option "PreferredMode" "1366x768"
    ModeLine "1366x768" 72.33 1366 1414 1466 1526 768 770 775 790 +hsync +vsync Interlace
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1366x768"
    EndSubSection
    EndSection
    /var/log/Xorg.0.log  -
    [ 418.253]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 418.253] X Protocol Version 11, Revision 0
    [ 418.253] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 418.253] Current Operating System: Linux Arch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
    [ 418.253] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08402ce0-a410-4f2d-aa05-6afb4296c9e1 rw quiet
    [ 418.253] Build Date: 14 March 2015 06:45:50PM
    [ 418.253]
    [ 418.253] Current version of pixman: 0.32.6
    [ 418.253] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 418.253] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 418.253] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 21 04:56:20 2015
    [ 418.290] (==) Using config file: "/etc/X11/xorg.conf"
    [ 418.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 418.333] (==) ServerLayout "Layout0"
    [ 418.333] (**) |-->Screen "Screen0" (0)
    [ 418.333] (**) | |-->Monitor "Monitor0"
    [ 418.333] (**) | |-->Device "Device0"
    [ 418.333] (**) |-->Input Device "Keyboard0"
    [ 418.333] (**) |-->Input Device "Mouse0"
    [ 418.333] (==) Automatically adding devices
    [ 418.333] (==) Automatically enabling devices
    [ 418.333] (==) Automatically adding GPU devices
    [ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
    [ 418.371] Entry deleted from font path.
    [ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
    [ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 418.371] Entry deleted from font path.
    [ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 418.371] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 418.371] Entry deleted from font path.
    [ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 418.371] Entry deleted from font path.
    [ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 418.371] Entry deleted from font path.
    [ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 418.371] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 418.371] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 418.371] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 418.371] (WW) Disabling Keyboard0
    [ 418.371] (WW) Disabling Mouse0
    [ 418.384] (II) Loader magic: 0x815d80
    [ 418.384] (II) Module ABI versions:
    [ 418.384] X.Org ANSI C Emulation: 0.4
    [ 418.384] X.Org Video Driver: 19.0
    [ 418.384] X.Org XInput driver : 21.0
    [ 418.384] X.Org Server Extension : 9.0
    [ 418.387] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 418.388] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 418.389] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 418.392] (--) PCI:*(0:1:0:0) 10de:0a75:1179:fd30 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
    [ 418.392] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 418.392] (II) LoadModule: "glx"
    [ 418.403] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 419.025] (II) Module glx: vendor="NVIDIA Corporation"
    [ 419.025] compiled for 4.0.2, module version = 1.0.0
    [ 419.025] Module class: X.Org Server Extension
    [ 419.026] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
    [ 419.035] (II) LoadModule: "nvidia"
    [ 419.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 419.099] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 419.099] compiled for 4.0.2, module version = 1.0.0
    [ 419.099] Module class: X.Org Video Driver
    [ 419.105] (II) NVIDIA dlloader X Driver 340.76 Thu Jan 22 11:03:05 PST 2015
    [ 419.105] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 419.106] (--) using VT number 2
    [ 419.162] (II) Loading sub module "fb"
    [ 419.162] (II) LoadModule: "fb"
    [ 419.162] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 419.182] (II) Module fb: vendor="X.Org Foundation"
    [ 419.182] compiled for 1.17.1, module version = 1.0.0
    [ 419.182] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 419.182] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 419.182] (II) Loading sub module "wfb"
    [ 419.182] (II) LoadModule: "wfb"
    [ 419.182] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 419.184] (II) Module wfb: vendor="X.Org Foundation"
    [ 419.184] compiled for 1.17.1, module version = 1.0.0
    [ 419.184] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 419.184] (II) Loading sub module "ramdac"
    [ 419.184] (II) LoadModule: "ramdac"
    [ 419.184] (II) Module "ramdac" already built-in
    [ 419.195] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 419.195] (==) NVIDIA(0): RGB weight 888
    [ 419.195] (==) NVIDIA(0): Default visual is TrueColor
    [ 419.195] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 419.196] (**) NVIDIA(0): Enabling 2D acceleration
    [ 420.273] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
    [ 420.274] (II) NVIDIA(0): Vision stereo.
    [ 420.274] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
    [ 420.292] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
    [ 420.292] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 420.292] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.12
    [ 420.292] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 420.297] (--) NVIDIA(0): Valid display device(s) on GeForce 310M at PCI:1:0:0
    [ 420.297] (--) NVIDIA(0): CRT-0
    [ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) (boot, connected)
    [ 420.297] (--) NVIDIA(0): DFP-1
    [ 420.297] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 420.297] (--) NVIDIA(0): CRT
    [ 420.297] (--) NVIDIA(0): CRT-0
    [ 420.297] (--) NVIDIA(0): DPY-0
    [ 420.297] (--) NVIDIA(0): VGA-0
    [ 420.297] (--) NVIDIA(0): VGA-0
    [ 420.297] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): --- EDID for CRT-0 ---
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): No EDID Available.
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for CRT-0 ---
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
    [ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) Name Aliases:
    [ 420.297] (--) NVIDIA(0): DFP
    [ 420.297] (--) NVIDIA(0): DFP-0
    [ 420.297] (--) NVIDIA(0): DPY-1
    [ 420.297] (--) NVIDIA(0): LVDS-0
    [ 420.297] (--) NVIDIA(0): DPY-EDID-f0d8f39c-e735-531b-2696-7b835139c44d
    [ 420.297] (--) NVIDIA(0): LVDS-0
    [ 420.297] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): --- EDID for Seiko/Epson (DFP-0) ---
    [ 420.297] (--) NVIDIA(GPU-0): EDID Version : 1.3
    [ 420.297] (--) NVIDIA(GPU-0): Manufacturer : SEC
    [ 420.297] (--) NVIDIA(GPU-0): Monitor Name : Seiko/Epson
    [ 420.297] (--) NVIDIA(GPU-0): Product ID : 0x3641
    [ 420.297] (--) NVIDIA(GPU-0): 32-bit Serial Number : 0x00000000
    [ 420.297] (--) NVIDIA(GPU-0): Serial Number String :
    [ 420.297] (--) NVIDIA(GPU-0): Manufacture Date : 2009, week 0
    [ 420.297] (--) NVIDIA(GPU-0): DPMS Capabilities :
    [ 420.297] (--) NVIDIA(GPU-0): Input Type : Digital
    [ 420.297] (--) NVIDIA(GPU-0): Prefer first detailed timing : Yes
    [ 420.297] (--) NVIDIA(GPU-0): Supports GTF : No
    [ 420.297] (--) NVIDIA(GPU-0): Maximum Image Size : 350 mm x 200 mm
    [ 420.297] (--) NVIDIA(GPU-0): Valid HSync Range : 47.4 kHz - 47.4 kHz
    [ 420.297] (--) NVIDIA(GPU-0): Valid VRefresh Range : 60.0 Hz - 60.0 Hz
    [ 420.297] (--) NVIDIA(GPU-0): EDID maximum pixel clock : 72.3 MHz
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): Detailed Timings:
    [ 420.297] (--) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
    [ 420.297] (--) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
    [ 420.297] (--) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
    [ 420.297] (--) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
    [ 420.297] (--) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
    [ 420.297] (--) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
    [ 420.297] (--) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.297] (--) NVIDIA(GPU-0): Image Size : 353 mm x 198 mm
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 4c a3 41 36 00 00 00 00
    [ 420.297] (--) NVIDIA(GPU-0): 00 13 01 03 80 23 14 78 0a 87 f5 94 57 4f 8c 27
    [ 420.297] (--) NVIDIA(GPU-0): 27 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
    [ 420.297] (--) NVIDIA(GPU-0): 01 01 01 01 01 01 41 1c 56 a0 50 00 16 30 30 20
    [ 420.297] (--) NVIDIA(GPU-0): 25 00 61 c6 10 00 00 19 00 00 00 0f 00 00 00 00
    [ 420.297] (--) NVIDIA(GPU-0): 00 00 00 00 00 23 5c 02 67 00 00 00 00 fe 00 53
    [ 420.297] (--) NVIDIA(GPU-0): 41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe
    [ 420.297] (--) NVIDIA(GPU-0): 00 31 36 30 41 54 30 36 2d 55 30 31 0a 20 00 04
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for Seiko/Epson (DFP-0) ---
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 420.297] (--) NVIDIA(0): DFP-1 Name Aliases:
    [ 420.297] (--) NVIDIA(0): DFP
    [ 420.297] (--) NVIDIA(0): DFP-1
    [ 420.297] (--) NVIDIA(0): DPY-2
    [ 420.297] (--) NVIDIA(0): HDMI-0
    [ 420.298] (--) NVIDIA(0): HDMI-0
    [ 420.298] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 420.298] (--) NVIDIA(GPU-0):
    [ 420.298] (--) NVIDIA(GPU-0): --- EDID for DFP-1 ---
    [ 420.298] (--) NVIDIA(GPU-0):
    [ 420.298] (--) NVIDIA(GPU-0): No EDID Available.
    [ 420.298] (--) NVIDIA(GPU-0):
    [ 420.298] (--) NVIDIA(GPU-0): --- End of EDID for DFP-1 ---
    [ 420.298] (--) NVIDIA(GPU-0):
    [ 420.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 420.298] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
    [ 420.298] (**) NVIDIA(0): been enabled on all display devices.)
    [ 420.298] (II) NVIDIA(0): Frequency information for Seiko/Epson (DFP-0):
    [ 420.298] (II) NVIDIA(0): HorizSync : 30.000-75.000 kHz
    [ 420.298] (II) NVIDIA(0): VertRefresh : 59.998 Hz
    [ 420.298] (II) NVIDIA(0): (HorizSync from EDID)
    [ 420.298] (II) NVIDIA(0): (VertRefresh from EDID)
    [ 420.298] (II) NVIDIA(GPU-0):
    [ 420.298] (II) NVIDIA(GPU-0): --- Building ModePool for Seiko/Epson (DFP-0) ---
    [ 420.298] (II) NVIDIA(GPU-0): Validating Mode "1366x768":
    [ 420.298] (II) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
    [ 420.298] (II) NVIDIA(GPU-0): Mode Source: EDID
    [ 420.298] (II) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
    [ 420.298] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
    [ 420.298] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
    [ 420.298] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
    [ 420.298] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
    [ 420.298] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.299] (II) NVIDIA(GPU-0): Viewport 1366x768+0+0
    [ 420.299] (II) NVIDIA(GPU-0): Horizontal Taps 0
    [ 420.299] (II) NVIDIA(GPU-0): Vertical Taps 0
    [ 420.299] (II) NVIDIA(GPU-0): Base SuperSample x4
    [ 420.299] (II) NVIDIA(GPU-0): Base Depth 32
    [ 420.299] (II) NVIDIA(GPU-0): Distributed Rendering 1
    [ 420.299] (II) NVIDIA(GPU-0): Overlay Depth 32
    [ 420.299] (II) NVIDIA(GPU-0): Mode is valid.
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x350":
    [ 420.299] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : +/-
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x400":
    [ 420.299] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "720x400":
    [ 420.299] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (II) NVIDIA(GPU-0): Extra : Interlace
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 60 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 65.00 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1344
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 70 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 75.00 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1328
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 75 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 78.75 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1040
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1136, 1312
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 800
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 85 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 94.50 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1072
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1168, 1376
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 808
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1152x864":
    [ 420.301] (II) NVIDIA(GPU-0): 1152 x 864 @ 75 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1152, 1216
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1344, 1600
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 864, 865
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 868, 900
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 60 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1376
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1488, 1800
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1000
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 85 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 148.50 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1011
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 60 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1328
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 75 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 135.00 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1296
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 85 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 157.50 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1072
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 60 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 162.00 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 65 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 175.50 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 70 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 189.00 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 75 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 202.50 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 85 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 229.50 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
    [ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 60 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 204.80 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1920
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2120, 2448
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1394
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
    [ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 75 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 261.00 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1888
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2104, 2456
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1417
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
    [ 420.303] (II) NVIDIA(GPU-0): 1856 x 1392 @ 60 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 218.30 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1952
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2176, 2528
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1439
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
    [ 420.304] (II) NVIDIA(GPU-0): 1856 x 1392 @ 75 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 288.00 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1984
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2208, 2560
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1500
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
    [ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 60 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 234.00 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2048
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2256, 2600
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
    [ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 75 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 297.00 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2064
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2288, 2640
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x350":
    [ 420.304] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "320x175":
    [ 420.304] (II) NVIDIA(GPU-0): 320 x 175 @ 85 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 175, 191
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 192, 222
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
    [ 420.304] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x400":
    [ 420.304] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x200":
    [ 420.305] (II) NVIDIA(GPU-0): 320 x 200 @ 85 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 222
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "720x400":
    [ 420.305] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "360x200":
    [ 420.305] (II) NVIDIA(GPU-0): 360 x 200 @ 85 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 17.75 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 360, 378
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 414, 468
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 223
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x240":
    [ 420.305] (II) NVIDIA(GPU-0): 320 x 240 @ 60 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 12.59 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 400
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 245
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 262
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
    [ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 73 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 332
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 352, 416
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 244
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 260
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
    [ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 75 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 360, 420
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 250
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
    [ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 85 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 348
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 416
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 254
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.306] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 56 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 412
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 512
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 301, 312
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 60 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 20.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 420
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 484, 528
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 314
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 72 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 25.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 428
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 488, 520
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 318
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 321, 333
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.308] (WW) NVIDIA(GPU-0): allowed).
    [ 420.308] (II) NVIDIA(GPU-0):
    [ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 75 Hz
    [ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 24.75 MHz
    [ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 408
    [ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 528
    [ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
    [ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 312
    [ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.308] (WW) NVIDIA(GPU-0): allowed).
    [ 420.308] (II) NVIDIA(GPU-0):
    [ 420.308] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.308] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
    [ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
    [ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
    [ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
    [ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
    [ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.308] (WW) NVIDIA(GPU-0): allowed).
    [ 420.308] (II) NVIDIA(GPU-0):
    [ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 85 Hz
    [ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 28.15 MHz
    [ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 416
    [ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 524
    [ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
    [ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 315
    [ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.308] (WW) NVIDIA(GPU-0): allowed).
    [ 420.308] (II) NVIDIA(GPU-0):
    [ 420.308] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.308] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
    [ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
    [ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
    [ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
    [ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
    [ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
    [ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.308] (II) N

    karol wrote:
    newguy wrote:These commands give no such file or directory
    Did you install uvesafb?
    Install v86d from AUR
    This was my first time installing from AUR so I think I installed it, "pacman -Q v86d" gives me output "v86d 0.1.10-5".
    Prepare the system
    Remove any framebuffer-related kernel boot parameter from the bootloader configuration to disable the old vesafb framebuffer from loading.
    $ grep vga /proc/cmdline
    $ grep -ir vga /etc/modprobe.d/
    Should return no results. If you do have a vga= option somewhere, you will need to remove it.
    It didn't
    GRUB
    Note: This might not work.
    First edit /etc/default/grub commenting the GRUB_GFXPAYLOAD_LINUX=keep line.
    Then regenerate grub.cfg via the standard script:
    # grub-mkconfig -o /boot/grub/grub.cfg
    Did this
    Then I also configured the file /usr/lib/modprobe.d/uvesafb.conf: (It wasn't empty) , so yeah. I think I installed it.Is there any other way to check ?
    Last edited by newguy (2015-03-21 10:21:29)

Maybe you are looking for