GPUsniffer.exe will not accept my GeForce GTX 560 Ti using drivers newer than 296.10
I updated my GPU drivers since the 296.10 version is over a year old, but the Mercury playback hack wouldnt work anymore. I was going bonkers all day today trying to troubleshoot the issue. I uninstaleld and reinstalled a bunch of times. GPUsniffer would give the notice that it "did not find any devices that support GPU computation". I went back to the old drivers and sure enough, GPUsniffer would detect it.
I wanted to make this post for people googling issues with the hack involving the cuda_supported_cards.txt file involving CUDA enabled GeForce cards that aren't officially approved by Adobe, and also so the engineers at Adobe can maybe look into their end to see if its the GPUsniffer.exe that is the problem with not being able to detect the drivers, or maybe it's Nvidia's problem on their end that the drivers can't be detected. At least you guys can talk to one another to straighten things out.
OK guys, i just went ahead and made a video showing you exactly what I'm doing and what happens with new and old drivers installed. You'll see that the new drivers simply do not work with everything else necessary to make the hack work remaining constant. In the middle of the video you might want to skip through since there's a long spot where the old drivers are installed.
I'm totally open to the fact that something could still be wrong on my end, but what can it be when this video shows the only difference between it working and not is clearly a driver change??
Similar Messages
-
Im trying to install new drivers for my printer and it will not accept my password
Im trying to install new drivers for my printer and it will not accept my password
Hey fyermanbob,
Thanks for using Apple Support Communities.
OS X Mavericks: If your administrator password was not accepted
http://support.apple.com/kb/PH14014
Have a nice day,
Mario -
Ipad 4 keeps asking me to put a password for Facebook on settings. It will not accept my password which I can use on safari and when you go to settings and open facebook it cannot connect to the server.
Ipad 4 keeps asking me to put a password for Facebook on settings. It will not accept my password which I can use on safari and when you go to settings and open facebook it cannot connect to the server.
-
Why does the GeForce GTX 560 Ti NOT support OpenCL?
From the Nvidia web site it says that the GeForce GTX 560 Ti supports: DirectX 11 > 3D Vision > PhysX > CUDA > SLI >
301.24 drivers have been used and have downgraded to 296.10 to see if that would help, but it didn't.
When I check the performance tab under Advanced it shows that the OpenCL option is grayed out. When I check the Sys info log it also shows that OpenCL is Not availible (included below).
Why is this and when will it be fixed? Now that CS6 is shipping it should be working.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3411 MHz
Built-in memory: 16351 MB
Free memory: 12614 MB
Memory available to Photoshop: 14726 MB
Memory used by Photoshop: 95 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560 Ti/PCIe/SSE2
Display: 2
Display Bounds:= top: -1080, left: 0, bottom: 0, right: 1920
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560 Ti
OpenCL Unavailable
Driver Version: 8.17.12.9610
Driver Date: 20120229000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560 Ti
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384Bandalier1 wrote:
Problem solved. NVidia just released their first 300 series drivers and the Open CL option is working now…
Good for you! I was just about to start typing a reply to the OP clarifying that support for OpenGL depends on the driver for the card, when I read your last post.. -
Will the Asus Nvidia GeForce GTX 650 work for prem pro?
Will the Asus Nvidia GeForce GTX 650 work in prem pro. The one in adobe's recommended list does not have an 'X' in the card description?
[Moved to Hardware forum.]
-
In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??
use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.
-
My 3GS will not accept my correct password and user name to start using the Cloud. It just spins while "verifying." How can I make it stop so I can activate iCloud ?
try using @me.com instead of your service address, i mean hotmail or yahoo or else, thanks.
-
I was trying to add and app to my iphone and was not able to do so. It wanted updated credit information. So, I entered it and it will not accept the month of experation. I have shut the phone down, sync it to the computer to update. Will not work. What can I do to continue?
Off the top I dont thing its good practice to post an email address here
I dont see how a google password change would impact on ur Apple ID/iTunes account
Have u access to the old email address? If not and you fail the apple security process then you need to call them
Have u tried to manage ur apple id from : appleid.apple.com -
HT204053 Icloud says my Apple Id is valid but it will not accept it to access Icloud
Icloud says my Apple Id is valid but it will not accept it to access Icloud
If the messages says that it is a valid Apple ID but not an iCloud ID, it's becaure you are trying to create an iCloud account on a PC. You can only create the account on an iOS device or Mac (running Lion or Mountain Lion). After creating the account, you can then sign in with the ID on your PC, but you can't create the account on a PC.
-
A few weeks ago my ipad lost all the data for using emails like there is no files to put my emails and it will not accept my username or password yet google mail (gmail) will can someone give me some advice please
Thank you; this has worked.
Regards -
WET54G v3.1 Will not accept the default password for web setup
The setup:
1 2WIRE wireless router for AT&T DSL connection
1 wireless laptop, online and good to go
1 desktop, too far from router to connect with an ethernet cable, this computer does not have wi-fi
1 new WET54G v3.1, trying to setup as a wireless-ethernet bridge to get the wired desktop on the network and online
I have set up the desktop with static IP: 192.168.1.1; Subnet 255.255.255.0; Gateway 192.168.1.226. The WET54G is directly connected to the desktop. I open Internet Explorer and go to 192.168.1.226. After entering the password "admin" and leaving the username blank, the login prompt simply reappears as if the password is incorrect. I have reset the WET54G to factory defaults numerous times (held the reset button for over 30 seconds). It simply will not accept the password.
Any suggestions? I tried live chat but the chat window was so slow and buggy that both times it seemed we were about to make progress the window would freeze up or refresh entirely and disconnect me. Extremely frustrating to say the least.
Thanks,
SeanHi brickmonkey,
Sorry for taking so long to get back on this. We left for a long vacation and I got ridiculously busy when we got back. ANyway I just spent some time working on this and wanted to report back. Still didn't get it to work.
Got into the 2Wire and wrote down it's settings:
Router Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Default Gateway: (???) I did not see this under the summary page, but it was on the internet connection details page., it's a 151.x.x.x number, which the WET54G was not happy to accept as the default gateway. It gave me the error "DUT and Gateway cannot locate in different subnet." Also, on that internet connection details page, an additional subnet mask of 255.255.255.255 was listed, but I'm guessing 255.255.255.0 is the correct one to use, right?
Because it wouldn't accept that 151.x.x.x address, I can't get any farther. I did notice when setting up the SSID and security to match that of the 2WIRE, the channel was fixed at 6 and the dropdown was disabled. I changed the 2WIRE from 1 to 6 in case that was an issue. The WET54G is in Infrastructure mode, as the guide you linked to indicated.
Any thoughts with this new info?
Thanks again for your help with this,
Sean -
My mid 2010 MacBook Pro 15 inch unibody battery will not accept a charge
HI there one and all!
My mid 2010 MacBook Pro 15" unibody laptop will not accept a normal charge using the mag safe cord. I have replaced the original battery with a factory new replacement, but I still have the same results.
The computer powers up and runs only with the mag safe cord attached and when shut down, does not switch from green to orange to indicate the charging mode.
Can anyone be of assistance or perhaps has had a similar issue? Thanks in advance to anyone for their insight and help. If it makes a difference, my computer information is as follows: MacBook Pro 15", Mid 2010
Processor 2.66 GHz Intel Core i7
Memory. 4 GB 1067 MHz DDR3
Graphics. Intel HD Graphics 288 MB
Serial number. W80---------------
Software OS X 10.9.4 (13E28)Please find "System Information" in this folder path---Applications > Utilities---and launch it. When it opens, find "Power" in the left-hand contents pane and click it to get something like this in teh main pane:
Copy everything in the "Battery Information" and copy/paste it here. The number values in that report may help us diagnose what is happening.
Also, did you buy this battery directly from Apple or from another source. There are an increasing number of reports showing up that suggests some counterfeit batteries being sold. -
Whilst playing Clash of Clans I will continually lose the internet connection. This means that I lose battles, resources, gold etc and lose boost times. I have informed Supercell who blame my internet connection even though the iPhone, laptop and TV all work fine so it is obviously a technical problem with their game and probably something to do with their last updates.
As I have purchased gems I feel that I should be compensated for my loss but they will not accept responsibility nor investigate the technical issue. The loss of connection occurs constantly with the game often freezing during replays or searching for battles. This is obviously not a connection issue.
What suggestions do you have to resolve this situation?Hi.
Thanks for the reply. I asked because I also wanted to see if others had encountered the same problem.
I have no problems with my internet connection as I run my TV, laptop and iPhone off the same connection with no problems. I believe that since the recent updates to the game this has caused the problem. The game often freezes, cancels out or returns me to the main game screen during battles or replays.
What I want to know is how do I get the game designers or owners to acknowledge my problem as at this time they keep telling me it is my internet that is a problem and not their game. How do they know this when they refuse to investigate. What can I do and who do I go to for support if they won't accept responsibility?
I am very grateful to you for replying but concerned that if this can happen to me then how many other gamers are losing out and paying for something that they are not going to receive.
Many thanks. -
Terminal window blinking cursor will not accept keyboard entry
Have SunBlade100 w/ Solaris8.
This is probably a dumb beginner question...
When I enter certain commands at the terminal window - in this particular case
# cat /dev/cua/a
and I hit <return> the cursor skips to the next line, and
continues blinking , and will not accept any keyboard entries.
1. What is the significance of this? Is the cursor waiting further action, and if so, what?
2. How do I get back to the prompt?
3. Under this condition, is it safe to exit the terminal window by closing from the Window menu? (I can't type "exit" because the cursor won't accept keyboard entries, and Help for "closing the terminal" warns against closing from the Window menu because any background processes will not be terminated (and this may cause problems).
Thanks in advance for any info on this.Thanks again for the info. <control>+C was exactly what I was looking for. It's coming back to me now-- the last time I had contact w/ UNIX was back in '85 at UC Berkeley (no GUI's back then!).
I'm assuming that <control>+C is a graceful (i.e. relatively harmless way to exit the command. -
we have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for sync and icloud, the icloud will not accept the 2 accounts?
Do you know what happens if you delete the icloud account from an iphone 4s? Will it delete the pictures, documents, etc. from the phone, or just unlink the icloud from the phone? I want to associate a different icloud account to the phone.
Maybe you are looking for
-
Logs de XML não processado no NF-e incoming
Olá pessoal, Estou precisando saber alguma forma de descobrir o que aconteceu com um xml enviado pelo fornecedor e que não aparece no monitor "NF-e centro de trabalho fiscal". Hoje quando um xml não aparece eu fico sem saber se tem algum serviço para
-
My IPOD touch will not synch all songs in my library. Library is on a windows 8 laptop. Checking the songs does not matter. I have multiple devices (ipod, IPhone 4 and 5, IPad 2) and two ITunes accounts.
-
How can i change the date of birth on my account
how can i change the date of birth on my account
-
How do I sync my music and apps back over
I left my ipod to charge plugged it into my computer. When I came back all of my music and apps were gone. How do I sync it back to my ipod?
-
HT1863 How can I transfer a file of older images from my macbook pro to my new iPad.
Hi, I'd like to take an album of photos on my Macbook Pro and transfer them to my Ipad using iphoto. I have iphoto on each device.