GR and IR mismatch report

Hello Team,
Please let us know any standard report for we can run to view GRIR mismatch but the IR and GR quantity is already equal and the IR and GR price has mismatch.
Regards
SANGEETHA

Hi,
it is not solution, what i am sating GR QTY 10 amount value 1000 rs and IR Qty 10 but amount value is 950. Theeir is differenece between GR amount value and IR amount value.
Is their any standard report to check list of po's difference between GR and IR quanity match and amount value is not match.
Regards
Sangeetha

Similar Messages

Data mismatch with ECC FBL5N report and debtor ageing report(BI side)

Hi,
I am facing a data mismatch problem with FBl5N(t-code for customer line item report) report in ECC side and Debtor ageing report in BI side.
The problem is
1) there are mismatch of data with some customer amounts in both ECC and Bi side.
2) and also there are customer Nos with amounts in BI Debtor ageing report which are not there in the ECC FBL5N(t-code for customer line item report)
for the second problem, I checked in the Tables BSID,BSAD in ECC side ,there also these customer Nos are not available.
One more strange thing is that with the same selectionin report on both ECC and BI reports the data mismatch and The extra customers in Bi reports are changing everyday, i.e. we are getting new set of data mismatch and extra customers Nos in BI Side.
If anyone have worked on this type of issue.....kindly help...
Thanks in advance

Hi,
on the one hand it may be delta mechanism of FI_*_4 extractors with the timestamps issue, that your comparision between BI and ECC is at no time up to date.
FI Extraction
on the other hand, it may be the delta problem between data targets in your BI-System, in case you load the FI-Data from a DSO to a cube and make a report on the cube. I have this problem at the moment and will watch this thread for more suggestions.

Inconsistency in upper level report and drill down report

I have to reports:
1) Higher level report pulls data against customers and shows aggregated data for all promotions for that customer from a table A.
2) Lower level report pulls data from the same table A, but for all promotions against a customer after i drill down on a Customer.
However, the values of a measure when summed up for a customer in the higher and lower level reports, does not match sometimes. Sometimes its in sync, sometimes its not.
My Oracle BI servers are 2 in no. with clustered configuration. Can this be an issue related to caching of measure values? If not, please give me pointers in other directions i can look.

clustering is not a problem here....just check for some example...and do some unit testing to find the rootcause of mismatch..it might be including some some extra values..

I/C Mismatch Report Format

I am new to creating/ modifying intercompany reports in HFM and am trying to fix a formatting issue that is annoying many of our users. On the mismatch report the interco balance is shown on two lines. So for example the first line might be entity E123 w/ partner E500 with a balance of -5,000 and then the line below it will be E500 with partner E123 with a balance of 5,000. Is there a way to get this to net so in this case a match would occure and neither balance would show or at least it would show with a net of zero. Please let me know if I am not clear on my issue. Thanks in advance.

Hi
It seems your application has been designed so that all accounts use the same account type for both sides of a transactions, using positive and negative numbers, instead of using different account types (expense/revenue, asset/liability) for each side of the transaction. For example, both "sales" and "purchases" are set to account type Revenue
In this case, using a plug account to run ICP reports will not provide the expected result, and all amounts will appear in the same column. This is because of the way the ICP reports work, and is considered expected behavior.
In the case of using Plug accounts, the assignment of accounts to Entity or Partner is based on the account type. Asset and Expense accounts are assigned to EntityAmount, all others are assigned to PartnerAmount.
Solution
1. Amend the application design to use different account types for each side of the transaction. For example, set account type = revenue for "Sales" account, and account type = Expense for "purchases" account
OR
2. If the application design must remain unchanged, so that both sides of a transaction use the same account type, then the ICP matching report must be designed using matching accounts rather than plug account to get the desired outcome.
hope this helps
thank you
Regards,
Mahe

Creating new/ modifying existing interco mismatch report

Can someone help me understand how I can modify an existing interco mismatch report or create a new one in HFM? I am familiar with financial reporting studio but that does not not seem to be where you work with mismatch reports. Any help would be greatly appreciated. Thanks in advance.

Hi,
Its looking that you are trying to create/work on Matching/Mismatch of Intercompany through reports.
These match and mismatch reports can be created in "Reporting" section in HFM itself.
Here in two different sections, you can mention the ICP accounts/combination and also mention their matching Account/combinations.
The two sections are matched against each other.
Try it
Mark as Answer/Helpful
and revert back if something concerns you
Regards,
J

Open and cancelled Quote Report

Hi,
Can anyone give me the information for getting open and cancelled Quote Report?

I hope you are using reason for rejection for cancelling quotations. If that is the case, you can use transaction VA25 to view the list of quotations. Here you can filter on two columns status and reason for rejection to view the report as per your requirement.
Regards,
GSL.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Logical AND in MDX Reporting Services Parameter

Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
(http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
But I'm not sure how to apply this to a parameter's MDX dataset.
Here is an example of the automatically generated MDX which uses logical OR:
This is the drop down parameter:
WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS
[Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
[Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
[Measures].[ParameterLevel]} ON COLUMNS
, [Department].[Department].ALLMEMBERS ON ROWS
FROM [MyCube]
And the demo report dataset is:
SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
ON COLUMNS FROM [MyCube]) WHERE
( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
CELL PROPERTIES VALUE,
BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi,
I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
Example 1
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1) ON COLUMNS FROM
(SELECT StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Or crossjoin between 2 parameters
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Jiri
Jiri Neoral

HST6.0 Header and footer in reports

Hi,
We have an application generated from designer 1.3.2 using Headstart, and now we need to upgrade that one to designer 6.0, Everyting works ok with the forms but when we try to generate reports we don't get any header and footer. I have looked into the demo application in Headstart and found 2 reports with header and footer but I can't figure out how to generate this from Designer.
Thanks in advance for any help!

These fragments might fall under the category of "other", as an example, there is a copyright fragment in the Other tab of the fragment toolbox window. You could copy that and enhance it to make your footer.

Customer and Vendor ageing report by ItemGroup@%@#$%@#$??

Hi All
How do we get Customer and Vendor ageing report by "ItemGroup"?
I know there is a standard report in Business One which gives you the ageing report by Business Partner Group. But I dont know whether it is possible to get by "ItemGroup". Please help me and excuse me for weird requirement..
Thanks

Hi Gordon,
that query is actually designed for getting the purchase reports with all the excise and other tax related information per line item in the marketing document. my requirement is something different than this where the client wants to see the ageing report by Itemgroup.
Since ageing is based on the invoice due date it looks difficult to bifurcate the each individual line item, its group, its line total and their due date. means we should add all the open invoices' line items to be grouped with its total based on the due date. any other way to solve this?
thanks

Why does it stop every few seconds for "buffering" when I try to watch the Daily Show and the Colbert Report?!

The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

Designing the consolidated and line item report for specific material

Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

Siebel 8117 and BIP Multilingual reports not working.....

Hello,
We went live with Siebel 8113 and BIP. We have Siebel Reports configured in 4 languages and the choosing the language and locale on report generation pick applet worked fine with correct translated report coming out.
We have upgraded Siebel to 8117.
Reports stopped working. Applied 8117 related BIP objects(only repository objects and seed data - ACR 719B) then default language, ENU, reports worked fine. But other languages are still generating ENU reports.
Applied QF0703 in Tools (It has SIEBEL_BIP_8117 Extension SIF) and deployed the SRF.
Only two things from 8117 BIP related items we missed.
a) EIM Table related schema changes. This is of no use for us as we don't use EIM.
b) LMU files were not imported into tools. Each time I tried to import an LMU, it gives an error that site "http://www.oasis-open.org/committees/xliff/DTD" is an invalid site. On checking in browser found that it should be https and changed it in one language XLIFF. Once the transport changed to http, comes an error that the patch is invalid".
Not sure what is the importance of LMU OR how to get around it.
Any suggestions are appreciated.
-Ravi-

Can anyone help me on this please?

GR and IR mismatch report

Similar Messages

Maybe you are looking for