GR and repacking in POSC

Hi,
I have implemented POSC with below steps:
Unloading
Packing
Putaway
Issue1: on Unloading task confirmation GR is automatically posted. Whereas I want to count before posting GR. this I want to perform using /scwm/gr instead of QIE process. How can I disable auto GR.
Issue2: Before closing the HU in /scwm/pack, when I trying to repack the dummy HU(created for unloading) into multiple HU, system says "Stock for required data does not exist". In fact I have set the availability group to F2 trying to resolve still issue persists.
Please advice.
Karthik

Hello, Try with below settings.
Try to choose Option 1 or Blank from the list.
Regards, Sathish

Similar Messages

  • HU without inventory management and message L3778 in storage type 999

    Hi experts,
    Need suggestion on the process to add inventory of an HU with status 'HU without inventory Management'. This issue has occurred out of the below scenario:
    1. our warehouse is HU & WM managed.
    2. We have a transfer order for a delivery document requesting to pick up 100 cases of MAT1 which is assigned to HU1.
    3. While confirming the transfer order user has confirmed difference for the full quantity of 100 because the SU/HU was not found in the bin.
    4. The system has set the status of HU as 'HU without inventory Management'. The HU is empty.
    5. system has moved the stock from the bin to difference storage type 999.
    Now user has found the stock for this HU and he wants to post the stock back into the bin. system does not allow to move the stock back to bin using LT01 as we get error message 'L3 778'.
    What will be the best practice to get the stock back into the bin and post the stock into the same old HU.
    Is there a process wherein we can post this stock to another bin and repack into the old HU?
    Thanks,
    Harish

    Thanks Manish on the hint. I was able to transfer stock to partner location and then bring back to original Storage type/Bin. Below steps was used to fixed the issue:
    1. Initiate a transfer of stock from WM/HU Sloc where the IM stock resides into Sloc 9099. An outbound delivery is created during this process.
    2. Create a transfer order with reference to delivery and pick the stock from 999 storage type.
    3. Create a Pick HU using LH01 and assign the HU on the pallet to the transfer order.
    4. Confirm the transfer order using LT12.
    5. Perform PGI for the delivery.
    6. Use HUMO to display the HU and then you can transfer the stock back to WM/HU location using the storage location transfer option available on the HUMO screen(EDIT à change HU posting à Storage location)
    7. Perform Bin to bin transfer to move the SU from 921 storage type to putaway the HU/SU back to the destined Storage type/Bin.
    Best Regards,
    Harish

  • Need help with Italics for ePub and InDesign CS5

    Could someone help a me out. I just can not find the answer to this and I know it should be simple, I am just missing it.
    I am creating an ePub from CS5 InDesign. All I want to do is have the italics that are shown in the text box in InDesign, show up in the epub file.
    I would prefer not to say what I have done (I think I have tried everything, but obviously I did them all wrong, so no point listing them) and I am hoping someone can do a simple, step by step guide to how to have italics show up in the ePub file.
    Sorry if this question is beneath everyone, this is really annoying that I can not figure this out on my own.

    Yup, done this.
    In InDesign, the text is Italic. It has the Character Style Italic associated with it.
    But when I export to ePub, it is not italic.
    Here is the HTML from the xhtml file for a single line of what is supposed to be italic text,
    <p class="normal normal-override-2" xml:lang='en-us'><span class="italic italic-override">Words that should be Italic.</span></p>
    The above line does not show up as italic in any of the 3 readers I am using to test with.
    Now, in the css sheet, the span.italic-override does not have anything associated to font-style. If I manually add the font-style italic, then re-pack everything, it works.
    It just seems to me a bit absurd to have to export the epub, unpack it, open it in dreamweaver, add the font-style, and repack it just to have something as simple as italic work.
    So, I am missing something, I get that... I just can't figure out what!

  • When extract omni.ja file using winrar program give me that file is corrupted for version 17.0.2 windows and language is EN-US ?

    i need to update and set default bookmarks show always when install firefox
    when update omni.ja file i do this steps :
    Steps to change “Bookmarks.html” file in “omni.ja”:
    - Copy “omni.ja” file and change the prefix of the file to “zip” so that you can extract it using WinRAR program, then extract the file.
    - Make the changes you want to the extracted files.
    - Open the original “omni.ja” file using WinRAR program.
    - Using “Add” button to replace the modified files.
    the first step when extart the file it's give me that file is corrupted only for this version (firefox 17.0.2 windows EN-US)

    There is no need to edit files in the omni.ja! archives to achieve this.
    *http://mike.kaply.com/2013/05/06/dont-unpack-and-repack-omni-jar/
    *http://mike.kaply.com/2012/03/26/customizing-firefox-distribution-ini/
    If you need to initialize specific files in a new profile then create a template folder in the Firefox program folder (C:\Program Files\Mozilla Firefox\browser\defaults\profile\) and place the files in that folder.
    *http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

  • Material Number change during unpacking and packing using HU

    Dear Friends,
    Need your help for the below case.
    our client is importing and selling to the domestic and exports. This is typically a trading plant.
    The issue is when we unpack and repack using the HU, the material will be changed or not.
    As per some of the inputs, i heard it will change. Please confirm.
    If it changes how to avoid it.
    Thanks in advance.
    Regards
    Prabhu

    Depends on your design and how you want it to be, you can go either way.
    usually if you repack material  ( e.g. 200 kg drum repacked to 4 x 50 kg ) you have some labor costs and costs for the other packaging material.
    you can design your case with 2 materials , the trading good with 200kg  and a second material master for the trading good in 50 kg.
    here you would use a production order to produce the 50kg material, you would issue the 200kg material and issue 4 smaller empty drums and get 200 kg of the material in 50 kg drums
    This new material would then cost more than the 200 kg material since you added labor and empty drums.
    If you want only work with one material number, then you issue the 4 empty 50kg drums to a cost center and use the packing function in delivery.
    You will never be able to know how much material you have in 200kg drums and 50kg drums in stock this way, as this process is for transport packaging
    If you want show the accurate stock and value situation then I recommend to go with 2 materials

  • Programmatically unpacking/repacking HUs

    In our business process, Deliveries for some of our shipments are created about 3 weeks in advance of the expected shipment date. These Deliveries, which contain estimated weights, are then put into SAP Shipments and are packed onto Shipping Units. On the shipping date, Deliveries are updated with the actual weights that were shipped. In 4.6B, we developed programming to dynamically update the weights on Shipping Units within the Shipment the correspond with the actual weights in the Delivery. In mySAP, this process is different since it involves Handling Units.
    Has anyone had to programmatically update weights and/or volumes in Handling Units in a Shipment after a Delivery has been already been packed onto the Handling Unit? Have you programmatically unpacked and repacked a HU?  If so, please specify any SAP Function modules that were used. Thank you in advance for your assistance.

    Hi Frank,
    In the following thread the same issue has been discussed in detail. The function WS_DELIVERY_UPDATE has to be used, as BAPI does not do the job.
    Re: Delete handling unit
    Regards,
    Ravi
    Note : Please mark the helpful answers

  • Getting error while importing Sandbox - OIM 11g R2

    Hi,
    I am getting the below error when I am trying to import any Sandbox :
    Import Sandbox Failed
    oracle.mds.exception.MDSRuntimeException: MDS-01163: invalid reference "/mdssys/sandbox/active_mdsSandboxMetadata.xml" MDS-01163: invalid reference "/mdssys/sandbox/active_mdsSandboxMetadata.xml"
         Information
         Please select sandbox archive to import.
    If the sandbox archive contains sandbox with the same name existing archive will be overwritten.
    Please help.

    I tried the both of the aproaches of deactivating the sandbox and also by publishing the sandbox before importing a sandbox but no success.
    I am getting the same error again.
    The issue is that I have created a custom UDF which is not visible on all the Create, Modify and User Details page but when I am adding any value to this UDF while creating or modifying the user, the value is not getting saved in the database ( USR table).
    I thought this could be the issue because of valueChangeListener property which was not set while creating the property, so I exported the sandbox and added the property in the userCreateForm.jsff file and repack the folder and tried to import the same but I am not able to import the sandbox.
    Below is the userCreateForm.jsff file which I changed :
    <?xml version='1.0' encoding='UTF-8'?>
    <mds:customization version="11.1.1.61.92" xmlns:mds="http://xmlns.oracle.com/mds" motype_local_name="root" motype_nsuri="http://java.sun.com/JSP/Page">
    <mds:insert parent="_xg_pfl5" position="first">
    <af:inputText xmlns:af="http://xmlns.oracle.com/adf/faces/rich" value="#{bindings.BusinessUnitID__c.inputValue}" label="#{bindings.BusinessUnitID__c.hints.label}" required="#{bindings.BusinessUnitID__c.hints.mandatory}" columns="#{bindings.BusinessUnitID__c.hints.displayWidth}" maximumLength="#{bindings.BusinessUnitID__c.hints.precision}" shortDesc="#{bindings.BusinessUnitID__c.hints.tooltip}" valueChangeListener="#{pageFlowScope.cartDetailStateBean.attributeValueChangedListener}" id="dtrt_dc_7285793058" autoSubmit="true">
    <f:validator xmlns:f="http://java.sun.com/jsf/core" binding="#{bindings.BusinessUnitID__c.validator}"/>
    </af:inputText>
    </mds:insert>
    </mds:customization>
    Please help.

  • How to deploy a war file from a different app server to the SAP one

    Hello,
    I hve recieved a war file from Tomcat that needs to be deployed on the SAP Java App server. As far as I know the SDM only allows to deploy ear files. How can I deploy this war to the app server?

    Hi Roy,
    in order to deploy the WAR file you have to wrap an EAR around it. I had the same problem.
    You can do this using Netweaver Developer studio.
    Perform the following steps:
    - Start NWDS
    - Create a New Enterprise Application Project
    - Create a New Web Module Project (name it like your war file => e.g. your war file is called myApp.war => call your Web Module myApp)
    - Edit the application.xml of your Enterprise App if necessary (description, Displayname etc.)
    - Link your Web Archive to your application archive (right Mouse click on Application Archive and from the Context Menu choose "Add Modules" => In the list choose your Web Module)
    => You can also perform a right mouse click on your web Module and from the context menu choose "Add to EAR Project" => In the list choose your Enterprise Application!
    - Build Web Archive (right mouse click on your Web Module and from the context menu choose "Build Web Archive" => This will create a war file that has the same name as your war file! => If you do not see it try to switch to resource perspective!)
    - Build Application archive (right mouse click on Application archive => from the context menu choose "Build Application Archive")
    You are done
    The EAR file is generated and will be created in your workspace.
    Now browse to your workspace. Unpack the EAR using WinZip or any other Archiver program.
    Replace the contained war with your war and repack the ear file (You can also use tools like Total Commander to directly replace the war file in the EAR with your war without having to unpack the war). You can also import your war into NWDS and rebuild it so you won't have to replace the WAR in the EAR but as your WAR is already built I would just replace it as described!
    You can now deploy the ear file to SAP J2EE
    Hope this helps (Reward points for helpful answers are appreciated!)
    Cheers

  • Error while submitting order to the deployed cartridge

    Hi All,
    I am getting this error while submitting my test order to the deployed cartridge. Could you please let know the problem?
    Fri Jan 25 19:16:08 IST 2013 <25-Jan-2013 7:16:07,641 IST PM> <INFO> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE]
    ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <Rolling back the database changes ...>
    <25-Jan-2013 7:16:07,641 IST PM> <ERROR> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE] ExecuteThread: '3' for queue:
    'weblogic.kernel.Default (self-tuning)'> <Cartridge deployment failed:>
    org.xml.sax.SAXParseException: Error attempting to parse XML file (href='model/SN_OrchestrationProject.xml').
         at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
         at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
         at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
         at com.mslv.oms.cartridgemgmt.PAR.i.a(Unknown Source)
         at com.mslv.oms.cartridgemgmt.PAR.i.d(Unknown Source)
         at com.mslv.oms.cartridgemgmt.DeployCartridgeRequest.getXmlModelAsDocument(Unknown Source)
         at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.f(Unknown Source)
         at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.a(Unknown Source)
         at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.onMessage(Unknown Source)
         at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
         at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
         at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
         at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
         at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
         at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
         at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
         at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Fri Jan 25 19:16:08 IST 2013 Deploy failed for cartridge SN_OrchestrationProject:
    <25-Jan-2013 7:16:07,641 IST PM> <INFO> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE] ExecuteThread: '3' for queue:
    'weblogic.kernel.Default (self-tuning)'> <Rolling back the database changes ...>
    <25-Jan-2013 7:16:07,641 IST PM> <ERROR> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE] ExecuteThread: '3' for queue:
    'weblogic.kernel.Default (self-tuning)'> <Cartridge deployment failed:>
    org.xml.sax.SAXParseException: Error attempting to parse XML file (href='model/SN_OrchestrationProject.xml').
         at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
         at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
         at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
         at com.mslv.oms.cartridgemgmt.PAR.i.a(Unknown Source)
         at com.mslv.oms.cartridgemgmt.PAR.i.d(Unknown Source)
         at com.mslv.oms.cartridgemgmt.DeployCartridgeRequest.getXmlModelAsDocument(Unknown Source)
         at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.f(Unknown Source)
         at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.a(Unknown Source)
         at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.onMessage(Unknown Source)
         at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
         at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
         at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
         at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
         at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
         at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
         at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
         at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

    Hi, this is weird, to me it looks like a problem when deploying a cartridge, are you sure this message is printed when submitting an order?
    If so, I would suggest you take a look inside your parfile which was deployed and see if there is anything obviously wrong with the file.
    In which case it would be a problem of the Design Studio build scripts.
    If that's the problem, you will need to report this, possibly as a workaround edit the par file and repack (which I agree is a pain in the neck).
    Viktor

  • Space reusage after deletion in compressed table

    Hi,
    Some sources tell, that free space after DELETE in compressed table is not reused.
    For example, this http://www.trivadis.com/uploads/tx_cabagdownloadarea/table_compression2_0411EN.pdf
    Is it true?
    Unfortunatly I cannot reproduce it.

    Unfortunatly the question is still open.
    In Oracle 9i space, freed after DELETE in compressed block, was not reused in subsequent inserts.
    Isn't it?
    I saw many evidences from other people. One link I gave above.
    But in Oracle 10g I see another figures. After delete rows in compressed blocks, and subsequent insert into that block, block defragmented!
    Please, if who know any documentation about change in this behavior, please post links.
    p.s.
    in 10g:
    1. CTAS compress. Block is full.
    2. after, deleted every 4 from 5 rows.
    avsp=0x3b
    tosp=0x99e
    0x24:pri[0]     offs=0xeb0
    0x26:pri[1]     offs=0xea8 -- deleted
    0x28:pri[2]     offs=0xea0 -- deleted
    0x2a:pri[3]     offs=0xe98 -- deleted
    0x2c:pri[4]     offs=0xe90 -- deleted
    0x2e:pri[5]     offs=0xe88 -- live
    0x30:pri[6]     offs=0xe80 -- deleted
    0x32:pri[7]     offs=0xe78 -- deleted
    0x34:pri[8]     offs=0xe70 -- deleted
    0x36:pri[9]     offs=0xe68 -- deleted
    0x38:pri[10]     offs=0xe60 -- live
    0x3a:pri[11]     offs=0xe58 -- deleted
    0x3c:pri[12]     offs=0xe50 -- deleted
    0x3e:pri[13]     offs=0xe48 -- deleted
    0x40:pri[14]     offs=0xe40 -- deleted
    0x42:pri[15]     offs=0xe38  -- live
    0x44:pri[16]     offs=0xe30 -- deleted
    0x46:pri[17]     offs=0xe28 -- deleted
    0x48:pri[18]     offs=0xe20 -- deleted
    0x4a:pri[19]     offs=0xe18 -- deleted
    0x4c:pri[20]     offs=0xe10 -- live
    ...3. insert into table t select from ... where rownum < 1000;
    Inserted rows were inserted in a several blocks. Total number of not empty blocks was not changed. Chains did not occure.
    Block above looks as follow:
    avsp=0x7d
    tosp=0x7d
    0x24:pri[0]     offs=0xeb0
    0x26:pri[1]     offs=0x776 - new
    0x28:pri[2]     offs=0x84b - new
    0x2a:pri[3]     offs=0x920 - new
    0x2c:pri[4]     offs=0x9f5 - new
    0x2e:pri[5]     offs=0xea8 - old
    0x30:pri[6]     offs=0xaca - new
    0x32:pri[7]     offs=0xb9f - new
    0x34:pri[8]     offs=0x34d - new
    0x36:pri[9]     offs=0x422 - new
    0x38:pri[10]     offs=0xea0 - old
    0x3a:pri[11]     offs=0x4f7 - new
    0x3c:pri[12]     offs=0x5cc - new
    0x3e:pri[13]     offs=0x6a1 - new
    0x40:pri[14]     sfll=16  
    0x42:pri[15]     offs=0xe98 - old
    0x44:pri[16]     sfll=17
    0x46:pri[17]     sfll=18
    0x48:pri[18]     sfll=19
    0x4a:pri[19]     sfll=21
    0x4c:pri[20]     offs=0xe90 -- old
    0x4e:pri[21]     sfll=22
    0x50:pri[22]     sfll=23
    0x52:pri[23]     sfll=24
    0x54:pri[24]     sfll=26As we see, that old rows were defragmented, and repacked, and moved to the bottom of block.
    New rows (inserted after compressing of table) fill remaining space.
    So, deleted space was reused.

  • Nokia N97 mini firmware

    First of all I would like to excuse me for my bad English as I am from Latvia!
    Recently I have bought a new Nokia N97 mini. I have backed up everything and written down all the name of software that I afterwards uninstalled as I thought that it would be better for firmware update process. My goal was to update the phone to the newest firmware for my phone, however I got into problems with all the versions available.
    So this is the information on my mobile phone:
    Software version: v 11.0.102
    Software version date: 01-02-2010
    Custom version: 11.0.102.C01.01
    Custom version date: 01-02-2010
    Language set: 13
    Model: N97 mini
    Type: RM-555
    Latest update: Not updated
    >What I understand is that that some custom firmware version is installed there. I should mention that it is brand new and right out of box from Finland so I don`t think that anyone would have made custom version, installed it and repacked the phone.
    When I use Nokia Software Updater in my PC (MS Win 7) I got informed about that that the latest possible version is already installed.
    When I use Nokia web site using my telephone code written under the battery I got informed that latest available software for my device is: 10.0.020, however in phone there is version 11.0.102.C01.01 installed.
    When I was looking for the latest software release for Nokia N97 Mini it was 12.0.110, however there was mentioned that it is only for certain devices.
    So the question is if the latest firmware (12.0.110) version custom package is available for my device. If it is possible that there in my device there is a newer custom version (11.0.102.C01.01) installed than my Nokia N97 mini device support (10.0.020) than it should be possible that there is some newer custom firmware (12.0.110) available for my phone.
    =============================================================
    So where can I obtain it? And speaking generally were (exact internet address of FTP or HTTP protocol handled server, with login information, if needed) all Nokia N97 mini firmware`s could be found? I would even try to install non-customized version 12.0.110 of it on my phone. Maybe I don`t even need any custom version and all Nokia N97 mini devices can handle any Nokia N97 mini firmware?

    I can clearly live without Latvian language and as it is well known that there is no special or no at all services or applications for Latvia region that I could miss. I would better use United Kingdom apps and turn off some really unnecessary services or news.
    I would`t reply if there were nothing at all from Latvia in phone. I just need to get it work faster and with less problems form software side. I could use any Nokia N97 mini update version that doesn`t have "Comes with music" services and apps as I don`t have license to it.

  • Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

    I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
    using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
    My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
    completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
    April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
    server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
    in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
    I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
    My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
    I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

    I just started having the same problem.
    I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
    I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
    I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
    I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
    Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
    I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
    I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
    I proceed to kick off the 100+ downloads needed before i left and left the console up.
    When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
    an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
    I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

  • How do you move changes from your project developments into the maintenance development system?

    Good day colleagues.
    We are in the process of introducing retrofit, and the picture is clear for us, generally speaking, to retrofit the project landscape with the changes done in the maintenance landscape.
    What about the other way around? We mean, when the project is set to Go Live, we understand the transports will be all added, e.g. to the Production System buffer to be moved there via Maintenance Cycle, based on the way we defined the project and the logical component being used.
    However, how do you feed those project transports to your Maintenance Development System using ChaRM?  or do you do that Manually?  We doubt. Copying Production back into Development?  no way !!!
    How do you establish that?  We have a sort of idea but the documents about retrofit only seem to talk about moving transports one way, as far as we have found.
    Many thanks for any feedback.
    Juan Carlos

    Hi Piyush.
    I apologize for a late close on this questioning about moving projects back into the maintenance stream.
    Basically there are 2 solutions as far as we know:
    1. What Vivek mentions, which is performing a cutover and repacking the project transports into 2 transports in the maintenance stream:  A workbench and a customizing.   In that sense, at the end of the day you end up moving just 2 transports to the maintenance stream up to Production.   They contain all your project objects.  Thanks to Vivek, again.
    This is a very practical and interesting approach.  The only reason we did not adopt it, is based on the fact that if by any chance we encounter an issue with a project transport object in the maintenance stream (Dev or QA), now that all is bundled together, we may be stuck right at the time weare getting ready to GoLive.  How tough is going to be that issue? how easy and quick to fix?how much would that affect the whole project time frame?   Those questions made us decide to option 2.
    2.  What we are doing is that at cutover we move at the same time all project transports to the transport buffer of each of the maintenance stream systems (Dev, QA, and Prod).   We first open the gate to move the transports to Dev and we test, then to QA and we test, as well.  If there may be an issue, and the issue can not be quickly resolved by the project team, we can go up to the extreme of using a new feature introduced in ChaRM in SP10, if we are not wrong, but definitely available in SP12.  That feature provides a way to selectively decide which transports of the release are to Go Live and which ones do not, although we have no had to use that feature, yet, but it is there.
    We do not see any risk on adding the transports to the maintenance buffers at the same time.  There are ways to control the systems that are open for receiving transports, and the project phases, which guarantees no room for error.  There have to be deliberate actions taken (more than one in our case), to wrongly move a project to GoLive before its time comes.
    That is more or less the scenario Piyush.    
    Hope that explains the scenario.  So far no decision on really publishing as a blog.  It seems not to be written on stone, as consulting with different companies, each adds its own flavor to the recipe and shuffle ideas to get to what they are looking for and makes them happy.
    Juan

  • Practical problem in oil industry

    Hi,
    We are facing one practical problem in oil industry.
    We are using base oil as a raw material. After adding additives to the base oil it will become semifinish material.
    This semifinish material will become finish material when it is packed in packing material like drum, bottles of different sizes, i.e., same semifinished material will become different finish material depending on packing material.
    Drums are used to sell to the customer as well as used to store in case there is no order. Bottles are used to sell only.
    If in case of shortage of semifinish material in the process (which happens practically), they are transferring the oil from drum to bottles to fulfil the requirement. There is no specific period of transfer. This may happen in this month or after six month. In this case the drum will become empty and reused.
    In SAP point of view this drum need to go back to storage location.
    Pls tell me how to map this requirement.
    Regards,
    Rajesh

    Rajesh,
    In your case say for example unpacking the material from drum and repacking to bottles, this can be through a Process order/Production order which ever you are using and you can use a specific order say for example ZP01.
    Here you can have a BOM with Finished material number(oil in drum) as a Input component along with bottle and other packing materials as required, you also need to add drum in negative quantity in the bom, so that you can recieve back the drum as bi-product. Use a routing/reciepe to capture your operation cost on pumping out oil from drum and filling the bottles. Have this combination as Production Version. Configure the order type paramters in COR4/OPL8 to have Production version selection manual. This means when you create an order, you can manually select the production version which is meant for unpacking and repacking.
    Hope this helps...
    Regards,
    Prasobh

  • Complex process mapping in eWM 7.02

    Hi All,
    I have a following scenario to be mapped.We sell hazardous chemicals.We store these chemicals in a separate hazardous storage type in drums of big size say 50 ltrs.When a customer asks for these chemicals he asks these in 1 litre bottles say 10 qty.
    So we create a sales order of 10 litres and create delivery for 10 litres.Now at the time of picking I need full HU of 50 litres to be picked.We move that drum to a specific zone /work center(as they are hazardous) and repack the 10 litres (10 units of 1 litre each) and ship it.Then we want to return remaining 40 litres along with the big drum to return from work center to original bin.
    To map this I have activated a process oriented storage control with an intermediate packing step.But at the time of picking system is creating WO of 10 litres , but I want it should pick full HU at picking.
    I better need a giudance on a whole scenario mapping rather than troubleshooting as I am not sure if I am doing the right mapping.
    Thanks
    Abhijit

    Hi Juergen,
    I configured it as you told.It is all working as expected.
    1) HU task to move from picking ST to work center
    2) Once it is confirmed one active Product WT to move product from picking ST to GI Zone, and yes I had to create a pick HU in RF to send it to GI zone
    3) Now , the question ,
    When I did the above steps I came back to work center to return the HU residual to first ST.I found the button  "return transfer " for doing that.But after clicking that it is popping up following
    message
    In the work center setting , I have assigned WPT 3060 for returns and I have maintained putaway strategy for WPT 3060 and other combination.
    But I do not see the HU WT after saving this .
    Have you encountered this error before.
    Thanks
    Abhijit

Maybe you are looking for

  • Retrieving values from a price sheet.

    HI All, I am new to Numbers and I am trying to create a sheet that will calculate pricing for screen printing. Basically, I need to be able to input two variables and have Numbers find the corresponding value in a separate table. There are two major

  • Line wrapping and font styles?

    Hi, If I have a piece of text which I would like to see line wrapped, and font styled, how should I do that? javax.swing.JTextArea has the capabilities to set line wrapping to on. javax.swing.JTextPane has the capabilities to set font styles like bol

  • Picture in gui

    how can i insert a picture in a gui? thx

  • Enabling Drill Down Buttons on queries

    Dear experts,   I have been writing queries on SAP query manager but for  some reason the orange drill down button does not appear. At other times it appears on default, Is there a way to have this button appear especially on master data , documents

  • Rain gauge data collection

    I'm tired of checking our rain gauges. Why is there not an app to collect this data from multiple wireless rain gauges?  This would ensure consistant on-site data and would be a great tool for farmers with large acreages.