GR- based invoice verification not active

Hi guys, need your help.
I have a PO with Inv. receipt, GR-Based Inv and ERS flag activated. I also have these flag active in vendor master and in PIR. I am trying to post invoice via MRRL and i am getting the error "GR-based invoice verification not active". Not sure why??  i already checked it and flags were active since last few years and nobody made any changes since then. PO was created just last month.
Any help be appreciated!

Hi,
In ERS PO invoice is not done... and take off the ERS indicator from the VN Master.
Tick the GR IV in PIR and in PO,  GR IV , ERS and enter the Tax CODE.
ERS is a cridit memo procedure.

Similar Messages

  • MRRL GR-based invoice verification not active error

    Hi,
    I have a vendor that has ERS active.
    Before it was activated four POs were raised, goods receipted and invoiced.  All 4 POs have freight charges (for the same vendor)
    When I run MRRL with "Settle goods items and planned delivery costs", which I have to do, these four POs are coming in even through they are fully invoiced already.  This is frustrating the clients who can't understand why old purchase orders are coming in at all. 
    any explanations or (even better) corrections?

    Hi!
    As have already mentioned for every purchase order with flag 'ERS' a table entry is generated.         
    If a goods receipt is posted, this goods receipt should be invoiced via ERS (transaction MRRL). Manually posted invoices should be avoided, because the record in table EKRS will not be deleted. Material documents  will be written to table EKRS and if you invoice manually (for example, via MIRO) this entry will still be there. Then, correctly, the system        
    will read this table and take these items as not invoiced. This is correct and according to the standard system design.                                                                               
    In general, if you processed an invoice manually for a transaction, you  should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run. To do so, you run ERS online in test mode, select the item and Exclude from ERS for the item. You can do this by Highlight the relevant lines and then click on the "Save" icon                     
    ('Exclude from ERS'  - Ctrl+S ).                                                      
    Best regards
    Erika

  • Indicator: GR-Based Invoice Verification not flaged by default in a PO

    Hi experts
    The flag Indicator "GR-Based Invoice Verification" is set in suppliers informations. And so when we create a purchase order, the flag is automatically checked in the item.
    Is it possible to make the flag with blank value (without modify values in suppliers infos) with conditons : depending on the document type ?
    Thank you for your response.
    Peggy.

    HI,
    Have you tried with inforecords ?
    GR Based IV comes from vender master or from Inforecord for combination of material + Vender.
    For, Material Type u can not control....As IV belong to Vender.
    Hope Help U !
    Regards,
    Pardeep Malik

  • GR Based Invoice Verification and Invoice Post and Block Process

    Hi,
    We currently use invoice "Post and Block" process for AP invoice processing.  GR Based Invoice Verification is not set in the vendor master for this purpose to allow us to enter an invoice where "No Goods Receipt" has been raised. However, when we raise a PO using material groups the flag "GR Based Invoice Verification" is activated in the PO.  We subsquently have to remove this indicator in the PO in order to register the invoice.  Why is this setting populated in the PO when it is not activated in the vendor master ?  Is there a setting in MM for material groups that ius populating this value in the PO where  a PO is raised using material groups ?
    Thanks

    Hello Eilish,
    With regards to Goods reciept indicator, firstly the system looks
    for any reference documents like purchase order or contract and takes
    the flag from there.
    If no reference documents or contracts are referenced, then
    the system looks for an info.record to take the flag from there.
    If there is not a info record then system will carry out the
    GR-BasedIV indicator from the vendor master.
    Hope this helps,
    Ray

  • SRM PO failed: Indicator for GR-based invoice verification used not allowed

    Hi Friends,
        I have an issue with a specific PO failed to transfer from SRM to ECC. We are in ECS scenario, SRM 5.0 Service level 7.0. We are in process of SP upgrade but this issue occured in Production system which is still in old SP level(SP 7.0).
    when I check the App Monitor, I am see the following errors:  but the status shows Auto_Completed
    1. PO: Indicator for GR-based invoice verification used not allowed
    2. PO: Instance XXXXXXXXXX of object type PurchaseOrder could not be changed
    3.  PurchOrder XXXXXXXXXX: Purchase order still contains faulty items
    4.  PO XXXXXXXX: Indicator for GR-based invoice verification used not allowed
    I can see the PO copied over to ECC. but status in SRM PO shows 'Error in Process'.
      BBP_PD for object PO shows:  Created, complete, ordered, In Transfer to Execute, Change was Transmitted  as Inactive status.    Transfer Failed shows Active, Document completed, created.
    I checked BP Maintain  for the vendor and PO and its no different than other POs and Vendors except Vendor had 'Goods Receipt based Invoice Verification' indicator checked in SRM.
    I tried to simulate the same Material, Vendor with GR-IV indicator both on and off, it works fine. Ofcourse this is in Quality box with SP 15 level.
    So, I am not sure if SP level upgrade might help it or not? If there are any other means to test, please advise.
    thanks
    Rao

    I was wondering how I could liquidate the PO by either creating a new PO or ??.
    What you could do to revive the PO in question is that after the upgrade, and after a round of background jobs run for CLEAN_REQREQ_UP and BBP_GET_STATUS_2, ask the buyer to make a dummy change to the PO (for example, change the description of the PO) and order again. This would trigger the transfer to the backend again. And hopefully this time, no error would occur.

  • Contract, Item category W & 'goods-receipt-based invoice verification'

    Hello gurus,
    In a contract item with the item category 'Material group', the indicator 'goods-receipt-based invoice verification' (field EKPO-WEBRE) is set.
    But, why this should be active?
    I need to tell you to my client why SAP is working in this way with item categoy = W - Material group.
    Do you know where I can find this information from SAP?
    Thanks in advance.
    Regards,
    Sandra Palomo

    Thanks or the answer, but, I saw before this customizing and it does not have nothing about GR-IV, only to Good Receipt and Invoice Receipt.
    Do you know where I can find this?
    Why is active this GR-IV indicator in the PO when the I have a Material Group Contract (item category W)?
    Regards,
    Sandra Palomo

  • EDI - Incoming Invoice Error and GR based Invoice Verification - 51 No GR

    Hi,
    We are implementing EDI for incoming invoices and use Goods Receipts based Invoice Verification.  When processing an inbound IDOC Invoice (type INVOIC01) where the Goods Receipt has not yet been posted, then Inbound IDOC is siiting at Error Status, 51 - No GR documents found.
    Is there any way we can process this as a Parked Invoice or for Verification in the background (MIRA)?  because the current situation is a problem, as 95% of our Inbound Invoices will be received electronically before the Goods are Received. 
    The actual Vendor's delivery note is stored in the segment E1EDP02 (Qualifier 016), field BELNR.
    Currently the IDOC as to sit in error until the Vendor's Delivery Note is Goods Receipted which can be several days later - SAP OSS Note 393883 fro 2001 suggests doing this, but surely this is a common situation.  The IDOC sitting in error in WE02 in the list of IDOCs is difficult to isolate from true errors.
    If this is was mnaul Invoice it could be processed through MIRA for background Invoice Verification later with program RMBABG00.
    We havd SAP version ECC 6.0
    I have spotted OSS Note 501524 which implies that is possible automatically Park Incoming EDI IDOC Invoices, has anyone tried this?  and what would be the transaction/program that could be used to post several at once when the GR has been processed (similar to RMBABG00)

    Hi ,
    You can use the program   RBDMANI2   which will reprocess all the IDOCs (EDIinvoices )that have failed . You can schedule this program in the background and it will post all failed invoices which have the GR posted later .
    We had the same scenario and we have scheduled this program as a daily job at night .
    Regards,
    Hari.

  • Goods-receipt-based invoice verification default for material group

    Hello experts,
    I put by default the option Goods-receipt-based invoice verification when creating a purchase order by tcode ME21N. Now, I would like if possible to only insert the option Goods-receipt-based invoice verification by default for some material group. Is this possible? This behaviour needs to be automatic.
    How can I achieve this behaviour?
    Thanks in advance,
    Best Regards,
    JP
    Edited by: Jeyakanthan A on Nov 20, 2011 11:11 PM

    Dear JP,
    In standard system this is not possible to default this indicator based on Material Group. This can be defaulted from Vendor Master record or Purchasing Info Record or Ticked Manually PO Item Details.
    If you look to enhance you system to do this, I would not advisable you to go with this default option because there can be situation that you order some material without Material Master Record (Like a frame work Order) in that case you will not be able to do GR and there can be conflict.
    You can create Material Group Info. record and default it from there, but again this for scenario where Material Master Record does not exists(Non Stock).
    Hope you find this useful.
    Regards,
    Reetesh

  • PO - GR based Invoice Verification/ IR Indicator

    Hi,
    I am facing a problem with the IR indicator in PO. The scenario is a SC is created, a PO is created automatically out of the SC and then a GR confirmation has to be done against the PO. I am using a service product.
    In the vendor master, I have set the "Goods-Receipt-Based Invoice Verification" indicator and "Invoice Receipt Expected" indicator.
    Now, if I create PO manually then these 2 indicators are defaulted into the PO follow-on documents indicator values. However, when the PO is created automatically from the SC only the IR expected indicator is set so I am not able to create a confirmation against the PO.
    The same way, if I set the "Invoice Receipt Expected" indicator and "Indicator:GR Conf.Expectd" indicator in the vendor master then only the "Indicator:GR Conf.Expectd" is set in the PO (created from SC) and not the IR indicator.
    Can someone suggest to me what could the problem be since a manual creation of PO picks up the indicator values from the vendor but it does not when created from a SC?
    Many Thanks,
    Saravanan.

    hi,
    See the foll related threads/Links/pointers:
    Re: Confirmation for PO without SC
    Error Indicator for GR-based invoice verification when order PO
    Re: Receiving Services as Materials in order not to perform goods receipt
    Re: Indicator u0093GR Conf Expectedu0094 in Business Partner
    Invoice Receipt Expected controlled from R/3 Vendor master
    Vendor Data Replication Problem
    869055 "Follow-on Documents" PO EBP Confirmation Flag 20.05.2006
    912428 509(SE) Account assignment for entry sheet missing 19.01.2006
    886307 Creating follow-on docs in the Order Collaboration scenario 18.10.2005
    518340 EBP: Tolerance checks with goods receipt and invoice 08.06.2005
    502981 EBP: Terminatn w/ invoice creatn for back-end purchase order 08.06.2005
    450068 EBP: Checks to invoice for BE purchase order incorrect 08.06.2005
    834270 IV inbox message BBP_BD 002: "Invoice will be .. 13.05.2005
    784775 Goods receipt-based invoice verification indicator part 2
    BR,
    Disha.

  • "Indicator: GR-Based Invoice Verification" direct input Upld PO LSMW

    Hi, Im using lsmw direct input method. I am uploading the PO. But the GR Based invoice verification field was not checked ON. Im trying this using USER_EXIT in enhancement MM06E005, with EXIT_SAPMM06E_017.
    Any body can tell me how i can check ON the field WEBRE( GR based invoice verification) while creating the PO through LSWM.
    regards
    RAJ

    Hi,
    How you solved, kindly explain
    Also explain how to upload PO through LSMW in the case of multiple line items for single PO?
    Thanks & Regards
    Ravi

  • GR-Based Invoice Verification

    I am having problems with the GR-Based Invoice Verification flag in the POs.
    Basically what I need is for the system to not allow me to post invoices over the good receipted quantity. I manage to get that control switching on the "GR-Based IV" flag in the PO, but at the cost of having to set the GR reference whenever I make an invoice.
    Is there someway in which I could post invoices in the system without making reference to the good receipt material document number while keeping the check that does not allow me to invoice over the total GR amount?
    Thanks

    Hi,
    you have to set the tolerance limit for the Invoce Verification for the respective Comapany Code.
    goto, IMG - Material management - Logistice Invoice verification - Invoice Block - Set Tolerance limits (OMR6)
    Set upper and Lower limits as zero.
    BW: Percentage OPUn variance (GR before IR)
    The system calculates the percentage variance between the following ratios: quantity invoiced in order price quantity units: quantity invoiced in order units and goods receipt quantity in order price quantity units : goods receipt quantity in order units. The system compares the variance with the upper and lower percentage limits defined.
    Regards,
    Pravin

  • Service-Based Invoice Verification indicator setup automatically

    Hi,
    How to get the Service-Based Invoice Verification indicator setup automatically when a user tries to create a PO. There is no service master being setup for the sevices carried out.
    Bascially the requisiitons are created through Projects based on the services performed and when the PO is created for the same the users forgets to have this indicator checked because of which there are problems which arises going ahead.
    We would like to have this indicator setup automatcially so that even if the user - Buyer forgets we dont get problems going ahead.
    Answers for this question will be highly appreciated.
    regards,
    Andy

    Hi
    You need to set this indicator in vendor master, however if you do not enter item category as D, it will not come default in purchase order. Checking the service based IV in vendor master indicates IV can be done for that vendor with reference to services.
    Thanks
    Edited by: Praveen Raghavendra on Jan 9, 2009 1:17 PM

  • ERS without Gr-based invoice verification

    Hi all,
    I have a question about ERS, greatly appreciated if anyone can give me some inputs.
    I create a PO with ERS flagged but not "GR-bsd IV" in po line item, then I do a PO receipt. I read from help that I cannot run ERS in this case. However, in my understanding ERS is just an IV creation process based on receipts, so if the receipt is already there why can't it just create the IV?
    I ask this question because in my business case I would like to have more flexibility. So logically, by flagging "ERS" only I can do the following at any time:
    1) Post Invoice before GR.
    2) Do GR and then ERS automatically.
    Anyone if I can do this? Thanks.

    Hi,
    The standard SAP system is designed in such a way that when you want to go for ERS, the prerequisites are:
    1. Evaluated receipt settlement must be flagged in the purchase order item.
    2. The vendor must be flagged as being subject to ERS in the vendor master record.
    3. The goods receipt must refer to a purchase order.
    Goods-receipt-based Invoice Verification must be defined for the purchase order item.
    4. A tax code must have been maintained in the purchase order item.
    5. The order price of the materials may not be an estimated price.
    If you want to carryout on the way you want, then it involves new development.
    Hope this helps.
    Thanks,
    Viswanath

  • Diff between GR based invoice verification and PO based invoiceverification

    Dear Friends
    Can any body pl clarify the difference between the GR based I V and
    PO based I V and how to configure the above.
    regards
    rk

    Hi,
    Gr Based Invoice Verification :  In this a separate invoice item is created for each delivered partial quantity.If we make the allocation with the purchase order system then propose more than one invoice item as a default if more than one partial delivery has been posted for the po item.
    If we make the allocation using delivery note the system proposes exactly the po items from this goods receipt, plus the the quanties posted.
    using gr based we can assign each invoice item uniquely to a good receipts item. Good receipt and invoices matched in po history
    In Gr based invoice qty should not be greater than actual delivered qty.
    Purchase Order Based Invoice Verification :  In this system generates one invoice item in the item list for each po item. The system provides quantity to settle in as difference between total d livered qty and thee total invoice qty.
    If we make allocation using delivery note the system determines the relevant po items with their total qty to settle-in the same way as if there was a reference of purchase order.The system will not propose qty relevant in delivery note.
    If there are several good receipt the purchase order history will not tell you which invoice came from which vendor.
    Br,
    Tushar Patankar

  • GR Based Invoice Verification Tick

    Hi,
    I want the list of vendors as per vendor account group, those are not maintained for GR Based Invoice Verification Tick.
    please suggest me so that i can maintain for those vendors.
    Regards,
    Pankaj

    Pls down load from LFM1 table

Maybe you are looking for

  • Select records based on 1 field have either of 2 values

    Good afternoon, II have 2 tables, Account and Order, it's a one to many where 1 account can have many orders. I'm trying to pull the records where the account has orders that have a status of Completed or Quoted. I know I'm not explaining well so hop

  • My iMac G5 iSight has died.  New iMac on order.

    My 5+ year old 20" iMac G5 iSight has died after a recent 3 hour power outage.  I have nothing.  It has acted a little stubborn with some restarts recently and I waited a little too long to replace.  I tore it down and replaced the PRAM battery but n

  • Validation for MM

    Hi, Can we create the Validation for Material relevnt like for Material master , movement type etc.., Regards Akmal

  • BI Check config error

    Hi, The following is the output of running Bi_checkconfig.bat from my client machine. Can somebody decipher what it means, and what I need to do? Thanks in advance. bi_checkconfig.xml follows: <?xml version="1.0" encoding="UTF-8" ?> <BICheckConfig ve

  • Best Photo Recovery App for Ipod video?

    Hi.... what should be the best app recovery tool out there that is compatible with iPod video?