GR based iv or not GR based iv unit price on map & standard

Hi,
I got the help from forum of the below during MIGO.
MAP
PO price Dr to Inventory A/c
PO price Cr-GR/IR
Standard
PO price Dr to Inventory A/c
PO price Cr-Gr/IR
I would like to know for both GR based iv or not GR based iv, are the above 2 cases (MAP and Standard) still the same where unit price is getting from PO.
Thanks

Hi Cal,
Technically the accounting entries would be the same (from PO Price) whether you select GR based IV indicator or not. GR based indicator is used to confirm the agreement of terms when goods ordered and while delivered.
If goods-receipt-based Invoice Verification has been defined for an order item, an invoice for the order item can be entered with reference to a goods receipt document or a delivery note number entered at the time of goods receipt. In the process, a separate invoice item is created for each goods receipt. Checking of price and formal accuracy of the invoice is performed at this item level.
Follow this link
http://help.sap.com/saphelp_45b/helpdata/en/75/ee0d4055c811d189900000e8322d00/content.htm
So unltimately it is the GR which decided the value & qty acc entries. GR based indicator simply to enalbe invoice creation based on the GRs happened on that PO, if this indicator is set before you do LIV GR is mandatory, and accounting entries will not change.
Hope its clear

Similar Messages

  • GR amount is not matching with PO unit price

    Hi folks,
    I have created a Purchase Ordre in foreign currency euro with account assignment project. Say the unit price of the item is euro 500/pc. While doing GR for three pcs, it is showing in purchase order history only 9 euros and in local currency column 44.45 saudi riyal as per conversion mention in po.
    Why it is not showing 1500euros?
    Please reply urgently.
    Regards

    Hi,
    You need to check for following:
    1 ) PO HEADER level currency
    2 ) Exchange Rate in PO
    3 ) Also, check for VENDOR MASTER :: Purchasing Data view for Pricing Date control field
    Also for present date  check for exchange rate between currencies which is generally maintained by FI

  • Not able to edit Unit Price in PO

    Hi,
    I am giving Authorization for a user.I have give authrization for PO,Price lists.But In PO the Unit Price is not editable.Which authorization should be enabled for this?
    Thanks and Regards,
    S.G.Sekar

    Hello,
    Give authorization setup in
    Sales A/R >Change Row amount ,And now user will able to change row amount in purchase order
    Thanks
    Manvendra SIngh Niranjan
    Edited by: Manvendra Singh Niranjan on Feb 8, 2012 12:16 PM

  • PerfView : Does source code lookup always shows time-based-indicators and not size-based?

    Hi,
        I've two questions on "source code look-up feature" - this is one of the highlighting features from PerfView (thank you for that).
    1) I've created ETL aiming only at managed memory pressure analysis (that is by deselecting all other options except => ".NET", "GC Only", ".NET SampAlloc")
          >> Now if I go to source code look-up from "GC Heap Alloc Stacks" it navigates to the code and shows an indicator (for example "105.7K|") does this mean => CPU time spent here -or- Total memory
    consumed from here?
    2) Currently "source code look-up feature" works only for .etl file and not for .gcDump, is there a way to make it working for .gcDump also with properly configured symbol paths? (I mean without creating .etl files).
          [this would really help me avoiding time & space for ETL in cases where I'm interested only in "gcDump"].
    --gopalan

    Sorry but I forgot to say, that I selected ITSMobile as the template generator. Everything works like a charm when I use the WebGui template generator.
    So I can narrow down the problem: Does anyone know how to display itsmobile templates correct in an standalone ITS 6.20 28.
    Best regards.
    Markus

  • Variance in MIRO can not post to stock account (price control:MAP)

    Hi, all
    As I know, if there is variance between PO price and INVOICE, the variant value will be posted to the stock account, if material with Moving Average Price.
    But when I test this process in my system(4.6C), the variance was posted to a variance account(by TE: DIF), the stock quantity is not less than the Invoice quantity.
    Why this happen?
    Does this is some bug in my system???
    Thanks very much for your help.
    Shafiat.G

    Hello
    For a material valuated at a moving average price, the price difference is posted to the stock account, provided there is sufficient stock coverage for the quantity invoiced. If sufficient stock coverage is not available, only the amount for the available quantity is posted to the stock account; the remaining amount is posted to a revenue or expense account.
    Regards

  • Rule based ATP is not working for Components

    Hi All,
    Our requirement is to do availability check through APO for Sales order created in ECC,so we are using gATP.
    Requirement: We are creating salesorder for BOM header (Sales BOM) and avaialbility check should happen for components i.e. Product avalaibility & Rule based substitution.
    Issue: Product availiabilty is working for components but rules based substituion is working,  mean Rules are not getting determind for components.
    Settings:
    - Header doesnot exist in APO and compnents do exist in APO
    - Availability check is not enabled for header item category and enabled for Item category for components
    - Rules have been created for Components in APO
    - Rule base ATP is activated in Check instructions
    We have also tried MATP for this i.e. PPM created in APO but still didn't get the desired result.
    If we create salesorder for the component material directly then Rule based ATP is happening, so for components Rule based ATP is not working.
    How do we enable enable Rulesbased ATP for components, i mean is there any different way to do the same.
    Thanks for help.
    Regards,
    Jagadeesh

    Hi Jagdeesh,
    If you are creating BOM in ECC and CIFing PPM of FG/Header material to APO, I think you need to CIF Header material, too, with material integration model.
    Please include header material in you integration models for material, SO and ATP check as well.
    For component availability check, you can use MATP; but for MATP, FG should be in APO. You need not to CIF any receipts of FG (stock, planned orders, POs etc), so that MATP will be triggered directly. Then maintaining Rules for RMs will enable to select available RMs according to the rule created.
    Regards,
    Bipin

  • Goods Issue total should not calculate based on Info price * Quantity

    Hi,
    The total amount in Goods Issue taken from "Info Price * Quantity" which doesn't ties back to the value posted to Journal Entry. It should calculate according to the actual unit price instead of info price, the info price is meaningless in the Goods Issue, why does the system capture the total based on that? Goods Issue total amount should match with what is posted to journal entry, it will confused the users if  it's not the same .
    Thanks.
    Regards,
    Kong Chee Ann

    Hi,
    I tested in the B1 system 2007A. Yes, the total of row is calculated by Info price * Quantity, not item cost * quantity.
    We can see, before really add the goods issue document, the field 'Item Cost' is display blank and only after added the document, you can see the Item Cost is displayed in field 'Item Cost'.
    That is because in some cases the item cost only could be known after real added the documents. For example, when the item is managed by FIFO.
    Thus, Item cost may not be able to know before real added. The field 'Total' cannot catch cost price and then use a info price to calculate a total and just for your info only.

  • Reference of 103 mat.doc. in  105 doc. , when GR based IV is not selected

    Hi,
    I required logic, to list out 103 material documents for which movt. 105 is not made , If GR based IV is not selected in PO.
    We know, each MIGO document has a reference document number. In case of 103 document, the reference document number is the same number In case of 105 document, the reference docu number is the document number of 103.
    But, the reference document number is blank, when GR based IV is not ticked in the Purchase order.
    I need some logic to find the reference of 103 document in 105 document for items without GR based IV.
    Best Regards
    Saravanan

    Hi,
    Does your PO history had been updated bu the 103 and 105 ? Please check , or the table EKBE,.
    Please check table mseg.
    Regards,

  • *******Problem in VO Extension .........(Not Eo based VO)

    Hi all ,
    I need to display the new columnin my page ,so i am moving to extend the VO ,whicjh is not entity based ,,,,,
    I followed all the steps in jdeveloper,,
    after adding extended vo in the first step,,,,
    i am getting the parent vo query in the Second Step ,,,,and then moving to third step
    it shows create Variable ,,,,,,,clicked on next ,,,,,then in the it displaying the Error ,,,,,
    Each row in the Query Result Columns must be mapped to a Unique Query Attribute in the Mapped Entity Coulmns.
    please suggest me how to overcome this
    Thanks in advance
    Kashyap

    Hi ,
    you might be extending the VO to add new attribute on VO so that you can display a new field on the screen right? ,because in your scenario when u reach to parent vo query in the second Step there u need to modify the query by adding a new required column in select statement ,and then in next step it will generate the view attribute by itself ,if you dont require to make changes in query then there is no purpose of VO extesnion which is not based on EO bcz all attributes will be available as usual .So please modify the query only to get the new view attribute ,all other things will be take care by itself.
    Thanks
    Pratap

  • When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?

    When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?
    Thanks, Rich

    In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf  type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

  • I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics

    I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics with "Alternative Text".
    I know that with a Microsoft product graphics can be tagged before a PDF is made. I need to know how to do this with my programming.

    The Acrobat SDK might be a starting point.
    From there, perhaps a plug-in (built with C+).
    Perhaps with a licensed release of a PDF Library (this could be $$).
    The viable and cost effective alternative is use the tried and true.
    Authoring in an appropriate authoring application with appropriate tag management.
    Example:  Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
    This way you place "Alternative Text" when mastering content in the authoring file.
    Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
    Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
    Regardless, here you have a sub-forum for discussions on Acrobat usage.
    Consequently discussions on/of 3rd party software is rather out of scope eh.
    Be well...

  • How to calculate stock on hand initial based on VALUATED not Category group

    Dear Expert,
    Now, i want run SNP with initial stock on hand calculated by stock on hand based on VALUATED not category group like CC or CI. Because in ECC we used a lot of valuation types for materials.
    please show us.
    thanks so much
    hungth

    Hi,
    1) You need to answer the question whether you really need this 200 quantity in APO or not? Is your requirement only relevant to SNP? Or that even for GATP, PPDS, etc you don't want to get this 200 stock in APO. If you don't want this 200 quantity in APO at all, then what I said  earlier would be applicable. You could try to have enhancement in CIF so that valuation type AKDTCLT1(200 quantity) gets exluded in CIF and doesn't reach APO. I am not really sure how simple or complex this could be, but most likely should be possible.
    2) Once the stock is in APO, are you able to distinguish between the 2 stocks in anyway? As far as I know, it won't be possible to distinguish. You could see the version (batch from R/3), and the stock category. I am not sure if valuation type info would be available in any way in APO, but may be I am wrong. Even if you were somehow linking the stock valuation type to the storage location stock, I think only possibility for your would have been to block storage location specific stock to come to APO in CIF (for ALL storage locations), but the stock at Plant level would still come to APO.
    If somehow you are able to distinguish the stock based on valuation type, then Ada's solution could be used.
    Thanks - Pawan

  • GR- based invoice verification not active

    Hi guys, need your help.
    I have a PO with Inv. receipt, GR-Based Inv and ERS flag activated. I also have these flag active in vendor master and in PIR. I am trying to post invoice via MRRL and i am getting the error "GR-based invoice verification not active". Not sure why??  i already checked it and flags were active since last few years and nobody made any changes since then. PO was created just last month.
    Any help be appreciated!

    Hi,
    In ERS PO invoice is not done... and take off the ERS indicator from the VN Master.
    Tick the GR IV in PIR and in PO,  GR IV , ERS and enter the Tax CODE.
    ERS is a cridit memo procedure.

  • PO Charge Account is not changing based on the Category

    Hello team,
    When we changing the Item category in PO requisitions, Charge accounting is not changing based on the item category.
    Charge account is populating based on the Item organization.
    In iProcurement requisition charge account is changing based on the category.
    Could you please let us know is there any setup missing
    Thanks,
    Raju

    You may consider using Expense Charge Account Rules available in Purchasing.
    The detail is available in User's Guide under "Expense Charge Account Rules", or
    you can also reference note How to Set Up and Use Category-based Account Default in Purchasing (Doc ID 293046.1)
    Hope this helps.
    Vanha

  • Menubar is not updating based on active application.

    Hi,I am using iMac with 10.7.4 mac os.My problem is menubar is not updating based on active application.And finder menu bar is appearing when i open the finder.And on thta time if i select "About my mac" or "Force quit" then that didn't give any response.At same time when i open any application like firefox or anything that finder menu bar is apper but not responding.And another probelm is at the time of login i entering the password and submitting,it's opening the desktop and again total screen will be becpme white and showing the activityindicator.Sp please tell me what's the main problem.And how can i solve these problems.

    Try restarting your iMac in safe mode (holding down the shift key while restarting) then see if you have the problem.  If not then use disk utility to repair your permissions.  Take a look at this link, http://support.apple.com/kb/HT1452

Maybe you are looking for