GR Based IV tick for Import Purchase Order

Hello Friends
Whats the significance of keeping GR based IV check box as unchecked for import purchase order.I am selecting this indicator and still i am able to do the process as follows
1. ME21n 2. MIRO (BOE capturing) 3. MIGO 4. Post Excise invoice 4. MIRO (Material Vendor)
Still could not understand why this indicator is suggested to keep as unchecked for import purchase order processing.
Please clarify.
Regards
Vivek sharma

Hi
For import POs , it is required that the GRbased Inv ver key removed, as we need to pay the amount due to the customs. We are yet to receive the material in our Goodown i.e goods receipt is yet to be done but payment to Customs has to be made only then material GR can be carried out. You have to enter manula values(amounts) for this to be processed. What you said reg the MIRO rpocessing evenefore Material receipt, this is possible , duirng MIRO you need to anter the quanity and the correspondingamount to be processed. While if you have GRbased Inv.verification then you need not enter material quanity or value manually which is automatic.
Regards

Similar Messages

GR for Imported Purchase order vide Inbound delivery

When I do Good Receipts for Imported Purchase Order using Inbound delivery and 101 movement type ,sometimes CENVAT clearing account gets hit and sometimes it does not get it .
Please let me know the criterion based on which CENVAT clearing account gets hit .

Hi Joseph,
Just check whether the newly created delivery type is assigned to the Confirmation Category LA under the below path:
SproMaterials ManagementPurchasingConfirmationsDefine Internal Confirmation Categories
Regards
Ramesh Ch

Tax Code for Import Purchase Order

Hi Experts,
I have searched for this content but didn't match my requirements.
My client has asked to create new tax code which they will be using in their Import Purchase order.
Attached along the client's requirement.I haven't created tax code of this nature.
Please advise which condition types should be used to create this tax code.
Kind regards,
Pradeesh.P

Your client requirement is correct in the sense , they need to new excise rates for one combination.
import procurement works differently.
We use dummy tax code here and actual excises will be shown with pricining schema .
For all import procurement , one need to use a separate pricing Schema and all tax values are entired manually while creating PO or cdn records are maintained.
The excises are captured as CVD - Countervailing duties and separate registers are maintained in configuration.
please note - Most of the cases there will be 3 pricing schema - domestic, import ,STO
the import process is also slightly different.
Me21n,MIRO(called commercial invoice @ for customs clearing),J1iex(cenvat capture with addtl-ref-commercial invoice),MIGO,CEnvat post ( cenvat post with addtl-ref-commercial invoice)
a particulat item will contain these cdn details
Basic Price
Landing changes
Insurance
Accessible value
Basic Customs Duty
CVD
ECESS
SHE CESS
Coustom Ecess
Coustom SHECess
Additional Duty
regards
manu

GR based invoice tick for Import

Hello all,
I have created Scheduling agreement for import in which GR based invoice tick comes automatically from vendor master. Now, I want to remove GR based invoice tick from Vendor master. I have made GR based invoice tick optional in SA screen layout and removed GR based tick in Vendor master but when i'm going to save it, system gives error, "fill required entry"
Now,I have made GR based tick invoice optional in Field selection group and removed GR based invoice tick and save it...but still getting the error, "The supplier has the same Tax Code".
Please suggest.

The message number is designed by your organization - ABAP team..
Go to SE91 enter the message class FB, then check for the no. 000.
Check the message where it used.. Consult with your abaper for more details about the message..

Goods receipt importing purchase order

Hi,
I have an addon that has to fill some udf's when a Itemcode is entered in the detail section. This works relativaly ok. But what is the best way to force the filling the udf's when the lines are filled in through the selection of a purchase order.
For the moment I have a routine that fill's all the udf is the screen gets activated and the button purchase order was clicked. This works if the user doesn't click on the good receipt while the wizard for importing purchase order is open.

Hi,
You should use the et_CHOOSE_FROM_LIST event to find out which items have been added / changed in document lines.
See here:
Re: events surrounding choosefromlist on system form.
HTH,
Frank

Import Purchase Order issue in Fund-mangement

Dear Sir,
We have implemented Fund-Mangement and are facing following problem in Import Purchase Order .
In Import Purchase Order , the CVD & Additional Duty are the MODVATABLE items . But as per standard SAP practice , we are mentioning tax code as V0 for Import Purchase Order and CVD/Additional Dutiy are treated as Delivery Cost . Due to such practice , after the Import Purchase Order creation , in the Fund Management the committed amount includes the CVD/Additional Duty also . But as per our business requirement , we want that CVD/Additional Duty being MODVATABLE they should get excluded from the Commitment Amount .
However incase of Domestic Purchase Order , we do not face this problem because here we mention the relevant Tax-Code and MODVATABLE excise duties are mentioned with the set-off condition under the relevant Tax-Code .
We request you to kindly guide us , as what steps should we follow to resolve the reported problem pl .
With Thanks & Regards
Sonia Agarwal

Hi,
I have assigned FR3 in accurals....now it is showing both the debit and credit enteries.I have given Tax code in import PO as V1(10%). In Bill of entry is showing me the error "Error in account determination: table T030K key FGH1 VST V0" because i am selecting the V0 (0%) Tax code.
I do not know why it is asking here as in OB40 already the account is assigned.
Please advice

Terms of Payment for Local and Import Purchase Order

Hello Experts,
I am SAP FICO Consultant, I am given a task of maintaining payment terms for local and import purchase order, I would highly appreciate your help in this regard. I know I can maintain payment terms via OBB8 but I am not sure that how to cover the following scenarios.
1. 100% Advance
2. 50% Advance, Balance in 07 Days (usually balance immediate with delivery is accepted but it is paid in 07 days for the record)
3. 25% Advance, Balance in 07 Days
4. 10% Advance, Balance in 07 Days
5. 30 Days Credit
6. 15 Days Credit
7. 07 Days Credit
IMPORTS
1. 100% Irrevocable LC in advance
2. 100% TT in Advance
3. 50% TT in advance & 50% before shipment.
Looking forward to hear from you.
Regards
Muhammad Yousuf Ali

Hi
All the Local as well as the R/3 data gets stored in the SRM tables ->
BBP_PAYTERM (Terms of Payment, Backend-Dependent)
BBP_PAYTERM_TEXT ( Texts for Terms of Payment, Backend-Dependent)
BBP_TQ02B ( QM System)
BBP_TQ02U (Description QM system)
Also refer to Transaction SLG1 for the log created in this case.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Capital Import Purchase Order for 1000000000.0000 Euro

Dear Sir
I am creating Capital Import Purchase Order for 1000000000.0000 Euro.We have already set price up to four decimals also in case of Imports. But Field is not allowing Purchase Order for that amount, its reducing the price. Maximum field length is 13 Charectar.
How its possible ?
Regards
Manoj

are you from Microsoft trying to buy Yahoo?
I dont think that 1 Billion Doller purchase order is standard business that really need to be created as a PO in SAP.
You just have a technical limitation of the field size.
You will not only have this issue for the PO. you will get it with the GR and IR and payment as well.

Part 2 Entry Not Created For CVD,ECess for Imports Purchase .

Hi
I have created Imports Purchase Order With Condition Type For Basic Customs Duty,In CVD(JCV1) , ECS on CVD (JECV) , 2nd Edu Ecess and ADC .
Then Passes IV For these Charges ,
If i capture Invoice in J1iex , then the system raise Err" No Part I exists for availing credit in excise invoice IMPORT01 2007"
During Migo , i captured the Invoice , then when i am posting the Invoice ( J1iex ) , system is raising Message NO CENVAT Available, No Cenvat TO BE Reversed.
and NO Part 2 entry is genearated .
Rgds
Paresh

Hi Asma,
In the time of goods receipt (MIGO) RG 23A part 1 will get updated automatically.
For Duty updation, GOTO J1IEX , post with respect to vendor excise invoice.
To check if it is posted or not. In J1IEX itself select display WRT vendor invoice you can see this invoice is posted or not in EXCISE INVOICE TAB PAGE IN DOC STATUS FIELD.
Then using t.cobe J2I5 extract the RG23a Part2.
Then using t.code J2I6 you can print or extract in Excel based on your selection.
Hope this will clarify.
Regards,
S.Umasankar

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

DELIVERY COMPLETED indicator for Services Purchase Order

hello experts,
i'm working in SAP with R3 4.7 for developing funtion / BAPI for a mobile web application for services purchase order.
i have a big problem:
is it possibile to set the DELIVERY COMPLETED indicator (ELIKZ) in services purchase order via BAPI or Function Module?
I'm working with BAPI_PO_CHANGE but and i succeded with material PURCHASE ORDER but not with SERVICES PURCHASE ORDER.
can anyone help me?
thanks in advance,
Eliana

For material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant

Error while submitting standard import purchase order program

Hi,
iam submitting Standard import purchase order concurrent program, iam getting
error in view - output like
Enter value for 12: EXEC FND_CONC_STAT.COLLECT;
Enter value for 14:
in view-log like
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 10451963
can any one help me?
Regards
Bhaskar

Please paste the code here.. there may be some parameter issue while submission.

Import Purchase Orders

In the Data Template to import purchase orders for release 9, in the instructions sheet it is given as ''You can use SQL, ODI, or a similar tool to extract data into your staging tables''. So how exactly can we use it for exporting? Also, how to export any kind of data?

Hi Sunil
because you are Purchasing from the vendor that has the currency in USD so the system will purpose USD every time
if you want to see the value in INR then you can check the value while you do the MIRO for Import vendor .
******or you may check the company currency if its is in USD then you can't see it INR at item level, Please check it out first at your material master level in Accounting View -1
Thanks

Import Purchase order

Dear all,
I have created Import Purchase order with multiple account assignment. But while doing MIRO for custom vendor for planned delivery cost, system giving me the error message as below,
No delivery cost can be posted in case of multiple account assignment ( Message no. 06356 )
It would be very difficult to create PO with seperate line item with seperate account assignment ( i.e.Interna order )
Is there any solution for the above case..
Thanks in advance.

Hi,
Please check the config for delivery costs in invoice verification.
Thanks,
Venkat

How to do custom miro for import purchase ?

Hi All
I want to know what is the process for doing custom miro for import purchase, In my case for some of the excise elements we get credit, so while doing miro how to take care of this ?
Thanks Rashid.

Hi,
CVD Account has to be enter in Co cd setting and Excise default setting as per your Tax procedure if it isTAXINJ then JMOD as default excise value for CVD there fore system identifies the CVD as BED( Basic excise) which you can avail credit.
1.Basic customs duty (JCDB) 10% - Material cost
2.Education Cess on BCD(JEDB )-2% - Material cost
3.Secondary edu cess on BCD(JHCS )-1% - Material cost
4.CVD (JCV1)-- Credit
5.EDU CESS FOR cvd-2% - Credit
6.SHE Cess on CVD(J1CV )-1% - Credit
7.Add duty of customs(JADC) 4% - Credit
Cycle for Import PO
Import Purchase order: In PO you have to maintain the Custom duties
1Customs duty (JCDB) 10%
2Cess on BCD (JEDB)-2%
3Secondary edu cess on BCD (JHCS)-1%
4.CVD (JCV1)
5.EDU CESS FOR cvd-2%
6.SHE Cess on CVD(J1CV )-1%
7.Add duty of customs(JADC) 4%
You have to enter local custom vendor for above condition type in PO, One main or material vendor which you enter at the top of the PO
Then against the 7 condition types the customs (Local) vendor should be given (i-e) you have to select the condition type then click on the lens icon & give the customs vendor,
And should have zero tax code in PO
2 MIRO for Custom Vendor by selecting planned delivery cost.
3. Capture Excise Invoice against Commercial invoice (MIRO document no)- J1IEX
4. MIGO u2013Goods receipt
5. Post Excise Invoice- J1IEX
6. MIRO for Import Vendor
7. Final payment

GR Based IV tick for Import Purchase Order

Similar Messages

Maybe you are looking for