GR blocked stock report(other than MMBE)
Hi friends,
do we have any transaction code to check the stock of GR blocked stock?
i need other than MMBE -this can be used for sinlge material.. i need Gr blocked stock list of all the material of perticular plant.
in MB52, it is giving blocked stock qty but i need GR blocked stock
Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM
Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM
There is no table that hold the GR blocked stock. This blocked stock in MMBE is dynamically calculated.
from OSS note: 23687;
The stock overview (transaction MMBE) displays the GR blocked stock. This stock is calculated from the total of all goods receipts for purchase orders into GR blocked stock of this material (movement types 103 and 106) for which the transfer into the own stock or the return delivery to the vendor (movement types 105 and 104) was not yet entered. In this case, only those order items are considered whose goods receipt to the stock is to be posted to the material master.
Because of this design, reading POs and PO history, it is not available in MB52 as it would create real performance issues.
Thats why I pointed you directly to the purchasing reports.
The stock would not be differ from what you get with the WE104 selection.
An ABAPer can certainly copy the MB52 program and include the calculation logic that is used in MMBE.
Similar Messages
-
Can you add comments to the XML reports other than one Block Comment and one Test Comment?
I know how to use Block Comments and Test Comments but if I need to add more comments to my XML report in a test other than one Test comment, is there a way to do this? In other words, I would like to be able to add say 5 comment lines for a single test. Also, can a Test Comment or Block comment be more than one line in length? If so, how do you do that?
What version of TS do you have? If you have 4.1 or better (might be possible in 4.0 I can't remember) you can just use the additional results. So in the step properties you will see Additional Results. Then just add as many as you want.
Then you will see it show up in the report like you want. I couldn't get multiple lines to work in one comment. I tried \n but that didn't seem to be supported here.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
StepComments.JPG 38 KB -
Dear Expert
i want to know a report which help me to know the block stock in a company on a particular date . please help me in this regard
Regard
Edited by: usmfarhan on Nov 14, 2009 2:48 PMHi,
Go to MB51, here select plants and in posting date give the date range
and in movement type give the 103 - GR to Block Stock
343 - TR Blaock to Unrest
349 - TR Block to Inspection
do some excel work.
Regards,
Pardeep Malik -
CRM reports other than Interactive reports
HI,
In my projects we have lot of custom fields developed in BP, Lead and Opportunity. The client needs a report based on the cutom fields. When we tried to creat new reports through interactive report we can find one reports for lead and opportunity that to only the standard fields are available.
how to create a report for custome fields. I am not able to create the DashBoard reports also. Can any one sent the settings for DashBoard.
With regards,
Selvam THi John,
1) How do I include triggers, sequences, etc in the report? We are exporting this to document the data model and it is not complete.
3) Could the report include a linked table of contents as part of the report?Well, at this stage reports are static. You can't change them.
2) When I open the exported Microsoft XML document in Word 2007, it reports that the file contains formatting items that are not supported in the current version. I would suggest this be updated or perhaps converted to OpenDocument format to be more standardized.This suggestion will be considered, although you shouldn't have problems opening files with MSWord 2003 and above. Does Word say exactly what it doesn't like ? That's strange.
Thanks. -
Reports: Other Than Tables, Format Issue, Content
Hi,
I am using Data Modeler 3.0 which I downloaded the other day. I have used the reports function to generate a document that shows table information. This has worked ok for tables but I had a few questions / suggestions:
1) How do I include triggers, sequences, etc in the report? We are exporting this to document the data model and it is not complete.
2) When I open the exported Microsoft XML document in Word 2007, it reports that the file contains formatting items that are not supported in the current version. I would suggest this be updated or perhaps converted to OpenDocument format to be more standardized.
3) Could the report include a linked table of contents as part of the report?
Thanks,
JohnHi John,
1) How do I include triggers, sequences, etc in the report? We are exporting this to document the data model and it is not complete.
3) Could the report include a linked table of contents as part of the report?Well, at this stage reports are static. You can't change them.
2) When I open the exported Microsoft XML document in Word 2007, it reports that the file contains formatting items that are not supported in the current version. I would suggest this be updated or perhaps converted to OpenDocument format to be more standardized.This suggestion will be considered, although you shouldn't have problems opening files with MSWord 2003 and above. Does Word say exactly what it doesn't like ? That's strange.
Thanks. -
Can't get adobe reader out of system - it always blocks opening items other than PDF files.
I can't get rid of Adobe reader. Want to get back to making Preview my browser default source. Can't get this solution to work.
Either "File"- "Get Info" in the menu bar or press Cmd-I. This will give you a pop up screen where you have an section called "Open with". Go there, select Preview as the application to open the document with, press the "Change All" button and confirm.Remove Adobe plug ins, if any.
Macintosh HD > Library > Internet Plug-ins
AdobePDFViewNPAPI.plugin
AdobePDFView.plugin -
How to remove GR blocked Stock
Dear experts,
We found there is some stock in GR.Blocked stock, which we can can not release into unrestricted now as we have no pending
103 documents,how to make the stock into unrestricted.please suggest me.
Thanks in advance.
Varun
Moderator message:
Locked. Reason: basic question.
Please search before asking.
Edited by: Csaba Szommer on Dec 23, 2011 6:48 AMHi,
Please refer the below links hope it may help you
http://help.sap.com/saphelp_46c/helpdata/en/a5/6334ef43a211d189410000e829fbbd/content.htm
diffrence between GR Blocked stock and Blocked stock
Did you check MMBE to see the stock...
whether its showing there...
If its showing there...
Remove the stock from GR blocked stock...either via referencing the material document through which you post it to GR blk stock or via referencing the PO...
and release it to stock or consumption...
and then check ....
You can do above from MIGO itself...
Regards,
Udaya. -
MM Stock transfer from blocked stock between plants
Dear friends ,
Could I transfer material from Blocked stock between plants but in Blocked stock ?
I not found this movement types in ECC.
best regards,
AleIt is not possible to move blocked stock between plants.
You have to transfer the stock into unrestricted- then you can move it to the other plant- then again a transfer posting into blocked stock. -
Hi Everyone!
May I ask if there's any other report aside from MMBE that can display the list of Materials that are currently in GR Blocked Stocks? (received using Movement Type 103)
Thanks a lot!Hi........
You have more than 4 t code for the same
1) me2l selection parameter WE104
2) me2m selection parameter WE104
3) mmbe
4) mb51 mov type 103
Regards,
Neha -
Report for material moved from blocked stock to unrestricted stock
Hi,
Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
Regards,
PratapIt would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria. -
Report to check the valued GR block stock
Hi,
I used movement type 107 to receive the PO with indicator 'Origin Accept', and would like to check how many stock I have received to the valued GR block stock.
Anyone tell me which report I can use? I've checked the stock report under IM, but haven't found it.
Thanks!
Linrun Tcde MB52, and from change layout Ctrl+F8 move column Value BlockedStock.
-
Blocked stock value report daily
Hi Gurus,
I am looking for a report that shows value in USD for blocked stock per selected date for a material.
Please let me know if any report. I tried MB52 it does give value in USD for blocked stock but it gives by batch number. I need that by date.
Thanks for ya help in advanceIn MB52,in selection Don't tick "Don't display values",In report,Click change layout,
Check for blocked stock value field is available >? Move it to right side.
or
Develop a report using table MARD. -
MMBE- 'sales order stock"- blocked stock
Hi all,
I have material showing in MMBE under unrestricted use stock (as sales order stock) and also under blocked stock (as sales order stock). Any ideas on how to move to just unrestriced use?
Thanks in advance.Hi
If it is in unrestricted sales order stock, you can use 412 E in t.code MB1b and transfer to unrestricted stock. If it is in blocked sales order stock, you need to bring to unrestricted sales order stock 343 E in t.code MB1b and do the above step.
Regards
Antony -
How to insert a table or object image other than at bottom or report
Please excuse my HTML ignorance. Is there a way to use a previously added tag to go back and insert a FP object at the tag location in an HTML report. The only way I can figure out how to do it would be to append the object using the report generation vis, then search the HTML document for the originally added tag, and replace this tag with the appended code.
I append teat results as they are generated but once all tests are complete, I want to put the summary table at the top (after the header though).
Thanks, RickHi Rick,
There is no built-in way with the Report Generation VIs to append something to your report anywhere other than the very bottom. I have attached a VI that shows the best way I can think of to accomplish this...it involves using an internal Report Generation VI called "Generate Report Get Data.vi" that gets the actual string that contains all your HTML from the internal data structure of the Report Generation VIs...once you have this string, you can manipulate it with the normal String functions in LabVIEW...then once you've got it manipulated the way you want, you can stick it back into your report.
I hope this gets you started in the right direction...I saved the VI in LabVIEW 8.0 format. Let me know if you have any other questions.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Custom_HTML_Report_Append.vi 31 KB -
Report on PO's raised for vendors other than fixed vendor
Hi
Is there any report which gives list of PO's which are raised for vendors other than fixed vendors
We are maintaining sourcelist
we need a helath report which gives list of POs in which buyer used other than fixed vendor
Thankshi,
In sap there is no one common report availlable for this. you want to develop a customized report for this.alternate solution is get the one time vendor list in MKVZ trx. pass the values in me1l trx where you can get the desired result.
Regards,
velu
Maybe you are looking for
-
My apple TV started asking for a 4 digit code to watch movies it only asked.
-
Can't get x509 from servlet filter?
i have a filter and a jsp. currently, both the filter and the jsp attempt to pull the X509 certificate from the request and log it (eventually the filter will perform authentication and the jsp will be a web service). however...the filter is unable t
-
Error when trying to buy music
Just tonight, when I tried to buy some songs (two different ones), I got the following error "Could not purchase SONG NAME. The requested resource was not found." After awhile of hitting the buy button, both songs eventually purchased, but I had to k
-
DURING RETURN PO PROCESS, MAINTAINING J1IS EXCISE IVOICE WITH REF TO MATERIAL DOCUMENT is already been posted but again going for same excise invoice posting with same material document inJ!IS SAP accept the input and allowing for double posting, so
-
Please anyone...?