GR can not printed for PO-Multiple account assignment on single line item ,

Hi!
I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
Can I make a valuted GR against PO line item with multiple account assignment.
I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
Can you please let me have the solution ?
Thank snd regards,
Suranjana

> I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
When you are having the multiple account assignment, then the system will force you to have GR-non valuated indicator being flagged which results in the fact there is not any FI document at GR posting stage and this is the standard feature of SAP.
> Can I make a valuted GR against PO line item with multiple account assignment.
No, not at all. The disability of GR indicator can be set in OME9 with account assignment category
> I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
In fact, it is possible to maintain multiple account assignment for each and every PO line item by selecting the 'Multiple Account Assignment' button in the 'Account Assignment' View of the Item Detail of PO. However, for such multiple account assignment selection, no accounting document will be generated upon GR maintenance. This can only be done during IR via LIV process.

Similar Messages

Multiple account assihnment in sigle line item

hi all,
please let me know the proceedure how to activate the multiple account assginment for sigleline item.-account assignment cat: K
i tried with OME9(MAINTAIN ACCOUNT ASSIGNEMNET CATEGORY)
ID: AcctAssgt - status to 2, but the thing is when i do the PO, GR-non valuation tick becomes active. even though i de-activated GR-NON valuation indicator in the same screen.
the error message is 06 438
Valuated GR not allowed in case of multiple account assignment.

There are two preconditions that must be fulfilled -
1) Go to transaction OME9 and flag on the 'IR changeability' indicator of the account assignment category 'K' (since this is for services).
2) When maintaining your PO, make sure that the GR-non-valuated indicator is flagged.
When GR is posted, no accounting document will be generated. This accounting document will be created during IR posting where A/P can manually modify the accounting data as their wish.
In fact, it is possible to maintain multiple account assignment for each and every PO line item by selecting the 'Multiple Account Assignment' button in the 'Account Assignment' View of the Item Detail of PO. However, for such multiple account assignment selection, no accounting document will be generated upon GR maintenance. This can only be done during IR via LIV process.
From the accounting point of view, for one particular single line item, it is possible to split into different cost centers or internal orders. For instance, I have ordered 10 pcs of bearings of which 4 will be charged to Cost Center A and the remaining 6 pcs will be posted to cost center B. However, it is of SAP standard feature that once using the multiple-account assignment, no accounting document will be generated after GR posting. They will only be posted when IR is maintained.
Thanks

Can't print a photo multiple times on a single page

I just installed iLife 8 and am trying to print one 3X5 photo multiple times on a single page. When I consulted the help menu in iPhoto, I found what I thought was the answer. When I followed the instructions, I hit a snag because I don't have the Photos Per Page pop-up menu it references. Any ideas on how I can do this to save paper?
Here's what the help menu said:
Printing one photo multiple times on a single page
If you have a favorite photo you want to share with many people, you can print multiple copies of that photo on a single page.
To print one photo multiple times on a single page
Select the photo you want to print.
Click the Print button.
Select the paper size (such as letter-size or legal-size).
Select the print size (such as 2 x 3 or 4 x 6).
If you want to make the photo a custom size, select Custom.
Click the Customize button.
Click the Settings button.
Select “Multiple of the same photo per page” from the Photos Per Page pop-up menu.
iPhoto will zoom and crop the photo to fit the space available. To make a photo appear full-frame, Control-click the photo and choose “Fit Photo to Frame Size” from the menu that appears.
Click OK.
Click Print.

Well don't I feel stupid! I just installed iLife '08 and assumed that it would tell me right away if I needed any updates. I found and installed the needed updates (7.1.1), I got the right settings drop down menu to print multiples on one page. Thanks for your help

Can not change the field BSEG-REBZG on the document line item

Hi,
I am not able to change the invoice reference field on the document already posted. I have tried config. settings on change document line items but unsucessully.
The problem is with the field BSEG-REBZT, if the field value is "V" RESIDUAL item I am not able to change it but if this field value is "Z" I am able to change it.
Can anyone who have come across this situation please guide me on this.
Thanks,
Srini

Hi Eli,
Thanks a lot for your resolution. I have assigned points to you.
Unfortunately my problem has not been solved inspite of implementing the so mentioned SAP notes.
Do we need to do anyother settings? Can you please guide me?
Thanks,
Srini

Account assignment template (FB60) Line item Value date

Hi Gurus,
I have an issue regarding the value date on line item level on Account assignment template on FB60. When user activates an Account Assignment template, on each line item system populates the value date equal to the date of the template creation date and not the current date. I created the template with several GL accounts and before saving it I deleted the value date from the line items. Now I want to reuse the same template after a week, it shows the correct GL accounts but with the value date equl to the template creation date (last week date). Any suggestion please, how can I fix this.
Regards,
Ahmad

In the IMG "Enter Global parameters" for your Company code change the status of the switch "Define Default value date" and then test.
Thanks
Ron

Sales order no and line item no in account assignment tab of line item no.

Hi All,
When we display a sales order and go to line item --> Account assignment tab --> we can see sales order no and line item no in that screen. We want to know from where this existing no. in that field is populating from.
We want to know this as we want to check feasibility of changing sales order and item no to maintenance contract no and line item no. ( Maintenance contract we have to pick from notification)
If anybody has any idea about this do let me know as this is urgent requirment.
Effort will be rewarded.
Thanks in advance.
Edited by: Satish Bharambe on Jul 4, 2008 10:38 AM

Hi Satish,
You mean Accounting assignment tab-->In Settlement rule details
If yes the order number which is coming in that field Sales order and for which sale order you are looking that details both are the same numbers(i.e Nothing but sales order number).
When you create sales order system will give number of the sales order the number will come in this place.
I hope it will help you,
Regards,
Murali.

Release strategy -multiple account assignment

Hi,
I have PO release strategy based on account assignment(one of the criteria). AAC used is P,Q, and N . Couple of questions -
1) I do not want to allow multiple account assignment in PO.
2) KNTTP is not available in CEKKO communication structure. I had to bring it through a user exit. Because of this looks like multiple account assignment still triggers release.

Hi
The thing you need to get considered is does the PO release at header level or at item level .You can create a class for account assignment category and assign the charecterestic properly created with the tab basic data properly filled for value assignment and assign the values for the AAC .
Regards,

MIGO in case of multiple account assignment.

Hi,
I have created PO with multiple account assignment. AAC is P.
While doing MIGO, FI document is not getting generated.
Can anyone plz explain how multiple account assignment functionality works?
Regards
Nilesh

Hi
Its a standard practice that if there is multiple account assignment, the proportion will not be appearing at the time of MIGO. It will get updated only at the time of Invoice verification.
Regards,
Lakshmanan Krishnan

Single line item for multiple line item payment.

Hi
I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
But is it possible to get single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
If i will have one single line item for payment, vendor report would be simpler. Please help

Hi,
1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
Rgds
Murali. N

Multiple account assignment and copy of po line item quantity to x lines

Hi,
I am wandering if it is possible to automate the copy of the first line presented for 10pc in multiple account assignment screen on PO line item level to 10 lines with quantity 1 in the same multiple account assignment screen. This is of course related to the second step we want to examine which is the creation of Assets for these 10 multiple account assignment lines
Looking forward to your proposals
Edited by: David Reynaers on May 19, 2011 5:09 PM
Edited by: David Reynaers on May 19, 2011 5:23 PM

Hi David,
First keep the PO line item Qty to 1 , then select multiple account assignment the first line with QTY 1 will be defaulted
Select the first line and choose copy just beside copy icon the new icon will appear "insert account assignment item"
Select on right side you have two options "Insert Once" , "Insert several times" select several time system will default Pop up
Insert number of times 9 , Now change the line item Qty. to 10
Thanks
Diwakar

'BAPI_PO_CREATE1' Multiple account assignment is not possible for AFS item

'BAPI_PO_CREATE1' -> This BAPI works perfectly without the 'account assignment' option . But for purchase requisitions which have account assignments BAPI returns the error - E|8W |185   |Multiple account assignment is not possible for AFS items.
Can somebody please help me to get this error resoleve .
My coding I have done like below.
DATA: pohead TYPE bapimepoheader.
DATA: poheadx TYPE bapimepoheaderx.
CONSTANTS : c_x VALUE 'X'.
DATA: exp_head TYPE bapimepoheader.
DATA: return TYPE TABLE OF bapiret2 WITH HEADER LINE.
DATA: poitem TYPE TABLE OF bapimepoitem WITH HEADER LINE.
DATA: poitemx TYPE TABLE OF bapimepoitemx WITH HEADER LINE.
DATA: posched TYPE TABLE OF bapimeposchedule WITH HEADER LINE.
DATA: poschedx TYPE TABLE OF bapimeposchedulx WITH HEADER LINE.
DATA: POACCOUNT TYPE TABLE OF BAPIMEPOACCOUNT WITH HEADER LINE.
DATA: POACCOUNTX TYPE TABLE OF BAPIMEPOACCOUNTx WITH HEADER LINE.
pohead-comp_code = '1000'.   "IEQ1 plant. "'1000'.
pohead-doc_type   = 'NB'     .
pohead-creat_date = sy-datum   .
pohead-vendor = EKKO-LIFNR. "'0000500004'.
pohead-purch_org = purch_org.
pohead-pur_group = purch_grp.
pohead-langu      = sy-langu   .
pohead-doc_date   = sy-datum.
poheadx-comp_code = c_x.
poheadx-doc_type   = c_x.
poheadx-creat_date = c_x.
poheadx-vendor     = c_x.
poheadx-langu      = c_x.
poheadx-purch_org = c_x.
poheadx-pur_group = c_x.
poheadx-doc_date   = c_x.
poitem-po_item    = iLineItem.      "1.
poitem-material   = req_item-MATERIAL.   " '000000000040000234'.
poitem-plant      = req_item-PLANT.
poitem-quantity   = req_item-QUANTITY.
poitem-net_price = NET_PRICE.
poitem-price_unit = PRICE_UNIT.
poitem-shipping   = 'Z1'.
poitem-preq_no    = req_item-PREQ_NO.
poitem-preq_item = req_item-PREQ_ITEM.
poitem-acctasscat = 'K'.
APPEND poitem.
poitemx-po_item    = iLineItem. "1.
poitemx-po_itemx   = c_x.
poitemx-material   = c_x.
poitemx-plant      = c_x .
poitemx-quantity   = c_x .
poitemx-tax_code   = c_x .
poitemx-item_cat   = c_x .
poitemx-acctasscat = c_x .
poitemx-net_price = c_x.
poitemx-price_unit = c_x.
poitemx-shipping   = c_x.
poitemx-preq_no    = c_x.
poitemx-preq_item = c_x.
poitemx-acctasscat = c_x.
APPEND poitemx.
POACCOUNT-PO_ITEM = iLineItem.
POACCOUNT-SERIAL_NO = iLineItem.
POACCOUNT-GL_ACCOUNT = '0000211010'.
POACCOUNT-SD_DOC = '0001001056'.
POACCOUNT-ITM_NUMBER = '000100'.
POACCOUNT-CO_AREA = '1000'.
APPEND POACCOUNT.
POACCOUNTX-PO_ITEM = '00001'.
POACCOUNTX-SERIAL_NO = '01'." '01'.
POACCOUNTX-PO_ITEMX = 'X'.
POACCOUNTX-SERIAL_NOX = 'X'.
POACCOUNTX-GL_ACCOUNT = 'X'.
POACCOUNTX-SD_DOC = 'X'.
POACCOUNTX-ITM_NUMBER = 'X'.
APPEND POACCOUNTX.
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      poheader = pohead
      poheaderx = poheadx
    IMPORTING
    exppurchaseorder = ex_po_number
    expheader        = exp_head
    TABLES
      return    = return
      poitem    = poitem
      poitemx   = poitemx
      POACCOUNT = POACCOUNT
      POACCOUNTX = POACCOUNTX.

I found the answer

GR Printing For Single Line Item With Multiple Account Assignment.

Hi All,
There is PO for projects (Account Assignment -P - Network) in which in a single item consist of multiple account assignment.
Noe while entering the GR I select "Collective Slip" option but when the GR is posted system automatically select option "Individual slip" and seprate line item are printed for each account assignment.
The printing program is standard SAPM07DR. The SAP version is 4.7. Can anyone tell what is ther any setting in configuration or is it problem in program or smart form
Thanks & Regards,
Omkar

hi
please check your form and routine used to print.

Multiple Account Assignment Data for PR not coming in LDB - PSJ

Hi,
I am using one report in which LDB is used. LDB name is PSJ. However when there is multiple account assignments for single line item of PR the report is giving wrong result. Is this LDB suitable for the given functionality.

hi,
please check for the following points:
1. check in ME21N, are referncing properly or not...
You have to reference it via using the document overview ON or directly entering the PR as source document for the PO...
2. check whether is getting properly saved in the table EBAN/EBKN...check it in SE16...you can check as per the document number...
3. If nothing is helping you from the above two points check with the ABAP and BASIS consultant...
Regards
Priyanka.P

Downloaded latest Reader for Mac and have had wireless printer problems. Either can not printer or it is extremely slow.

I downloaded the latest Adobe Reader for my Mach and I have a wireless Canon Printer. I have not had any problems with my printer until now. It will either not print or print really slow. Can not print any pdf files at all. Do I need to uninstall it or is there a fix?

Uninstall Reader. Is your printing back to normal? What version of Reader did you install under what OS?

HT4623 popup 'photo stream' has appeared & not allowing it to open & blocked my ipad mini. it says photos for iCloud account can not be assessed. review your account information in settings. IGNORE & SETTINGS ARE NO WORKING

popup 'photo stream' has appeared & not allowing it to open & blocked my ipad mini. it says photos for iCloud account can not be assessed. review your account information in settings. IGNORE & SETTINGS are not working

Try this now.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

GR can not printed for PO-Multiple account assignment on single line item ,

Similar Messages

Maybe you are looking for