GR for a STO with SD delivery and Batches with split valuation X

Hello,
We have a problem with the Goods Receipts for Stock Transfer Orders between plants for materials subject to batch split and split valuation with valuation type X.
The scenario is very similar to the one explained on this thread: STO:problem with batch valuated material
When creating the the STO, it automatically sets a valuation type that is not be the appropriate one, we cannot use only one valuation type per position because we can use more than one batch (and valuation type). The outbound delivery has the correct valuation types for each batch and material but when doing the GR at the receiving plant, it only takes into account the valuation type indicated in the STO with no chance to change it.
I have seen the Note 212532 but we are not working with active ingredients.
Does anybody know a useful EP to use?
Thanks in advance for your help.
Regards,
Javier.

Well, we can change the valuation type before Posting the goods issue of the delivery, but in most cases we need more than one batch (each batch has a different valuation type) for each item (material) in the purchase order.
We can do this at delivery level but the GR only takes into account the valuation type of the purchase order.
Thanks.

Similar Messages

  • Authorization for PO fields of over delivery and under delivery tolerance

    Hi,Any one know how to set authorization for PO fields of over delivery and under delivery tolerance?
    For example to allow certain user to edit the these fields but other users will be only display mode.

    Better create variant for restricting fields over & under delivery tolerance for certain users than applying authorization.

  • Putaway and picking in ERP-WM with SU and batches with mixed stock

    Hello all,
    I configured a WM warehouse with SU management, and batch management. We have bulk storage for example of 20 pallets. each pallet may have its own SU and batch numbers. As a result we may have in the bulk storage 20 SUs with 20 different batches.
    I have 2 problems:
    1. in Putaway strategy B (Bulk) - although the storage type is configured to allow mixed storage - automatically the system chooses the next empty bin. How can I force the system to add to existing stock instead?
    2. in Outbound Delivery (when the batch number is not entered in the delivery), when I create the TO (through LT03), the system proposes a FIFO batch number (again, we are talking about Bulk storage). How do I tell the system not to determine the batch number - but instead take it from the chosen SU on confirmation?
    Thanks,
    Isaac

    Hi,
    1. in Putaway strategy B (Bulk) - although the storage type is configured to allow mixed storage - automatically the system chooses the next empty bin. How can I force the system to add to existing stock instead?
    In Bulk system would only one SU type perBin. If the next SU is of diferent SU type then it would propose the next Bin.
    2. in Outbound Delivery (when the batch number is not entered in the delivery), when I create the TO (through LT03), the system proposes a FIFO batch number (again, we are talking about Bulk storage). How do I tell the system not to determine the batch number - but instead take it from the chosen SU on confirmation?
    In this case you do not setup batch determination at delivery or WM level.
    Since this is Bulk, system will allow for SU number to be entered during picking.
    However the Batch number population in TO upon SU selection is doubtful.
    Hope this helps.

  • MY system folder, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac) How do I remove them

    I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac).  For the most part the dupes are an exact copy, but not always.  I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas

    pacull,
    Use iCal>View>Show Notifications to choose what to do with the notification.

  • I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..

    I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • What  is mechanism to integrate with the rdf and Rtf with concurrent manger

    hi
    what is mechanism to integrate with the rdf and Rtf with concurrent manger in oracle apps .
    can any one help me
    Thanks in advance

    1. Create executable for Oracle Reports.
    2. Create a concurrent program based on this executable with output type as xml.
    3. Now from XMLP responsibility, create a data definition with data definition short code = concurrent program short code
    4. Create template definition choosing the data definition created above. Upload RTF/other template format created.
    Now run the concurrent program and test it.
    Step by step guide is available here http://www.oracle.com/technetwork/middleware/bi-publisher/overview/xmlebsrep-132947.pdf

  • Code works with Dreamweaver CS6 and not with CC

    <p><a href="javascript:void(0)" onclick="window.open('http://www.anything.comt', '', 'top=20,left=20,toolbar=0,statusbar=1,scrollbars=1,resizable=1')" title="title">name</a></p> works with Dreamweaver CS6 and not with CC
    [Edited Title and moved to Dreamweaver- JTS]

    I'm not quite sure I understand your point.
    I have just tested the Open Browser Window behavior in Dreamweaver CC. It creates slightly different code from Dreamweaver CS6, but it works correctly. This is what is created in the HTML:
    <p>my <a href="#" onClick="MM_openBrWindow('http://www.adobe.com/','mywindow','toolbar=yes,location=yes,status=yes,menubar=yes,scrollb ars=yes,resizable=yes')">link</a>
    </p>
    Dreamweaver CC also adds the following code to the <head> of the page:
    <script type="text/javascript">
    function MM_openBrWindow(theURL,winName,features) { //v2.0
      window.open(theURL,winName,features);
    </script>
    The definition of the MM_openBrWindow() function is needed in the <head> for the code to work. But it definitely works OK.
    With regard to _self and _blank not working, I can't find any problem with the way Dreamweaver CC handles them.
    However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:
    https://creative.adobe.com/products/dreamweaver
    Open the drop-down menu under "In this version", and select Dreamweaver CS6 as shown in the following screenshot:
    With Dreamweaver CS6 selected, click the large Download button at the top-right of the page. You can then download CS6, and install it alongside Dreamweaver CC.

  • Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

    I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

    Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty.  That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu. 
    Click to view full size
    If there is an item in there drag it out.
    OT

  • When i open my emails with outlook first and then with my ipad 4, the ipad does not show me that i have new mail despite that it actually downloads them. iphone 3g and 4s used to do that. any suggestions please?

    when i open my emails with outlook first and then with my ipad 4, the ipad does not show me that i have new mail despite that it actually downloads them. iphone 3g and 4s used to show them as new emails. any suggestions?

    1. Open iTunes.
    2. Click the View option in the iTunes menu.
    3. Select the Show Sidebar option.
    Connect your phone, select it in the Sidebar...the various tabs will now show as before.

  • Current 1TB computer dying.  Installing new 3TB drive next Thursday.  Can I just go directly to my account and install Creative Cloud with Proshow Producer and Bridge with a hastle?

    Current 1TB computer dying.  Installing new 3TB drive next Thursday.  Can I just go directly to my account and install Creative Cloud with Proshow Producer and Bridge with a hastle?

    When I look at the forum index Welcome | Adobe Community I do not find a program called proshow
    Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
    or
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq

  • Hi there i have ipod touch 2nd gen and i am tryna restore it but i get error 21 with orginal fireware and 1601 with custom fireware and when it connected to itunes and i try to boot it up by restoring it white screen with lines thorugh it

    hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it

    Those errors are covered here:
    http://support.apple.com/kb/TS3694

  • Intracompany STO with SD Delivery and WBS

    Hello All,
    I am transferring stock from 1000 plant to 1100 plant. At the time of the procurement in the Plant 1000 the WBS mentioned is A and the GR in the stock is done with the account assignment Q with the WBS and the inventory created after the GR is with the WBS A. When i am trying to transfer from plant 1000 to 1100 I am mentioning the WBS B in the STO from the stock of WBS A to the 1100 plant but the system is not allowing me to transfer the stock from one WBS to second via STO process. Also PR commitment with AAC "Q" and IC "U" is not appearing.
    Please suggest the process which i can follow for the same.
    Thanks in advance.

    HI,
    Check this setting is maintained or not
    OLME-.> Account Assignment -> Define Combination of Item Categories/Account Assignment Categories
    For Item category U  ->  Account Assignment Category Q is maintained or not
    If not then maintain.
    Then try to create PR with item category U and AAC Q

  • Reg: vacancy for LabVIEW developer in Bangalore, Chennai and Delhi with (1-6) years experience

    Recruitment Process for LABVIEW: Tele Interview in case of outstation candidates. Bangalore candidates will have to first come for a Written Test (Technical + Analytical), 1-2 rounds of direct technical interview.
    Degree/Branches:  B.E / B.Tech in Electronics / EEE / E&C / E& Instrumentation .
    ROLES AND RESPONSIBILTIES OF ASSOCIATE ENGINEER-SEG:
    Development
    1. Responsible for developing software for the project/module allotted to you with smooth coordination and smooth handing over of the work executed by one to another member in case of change of projects.
    2. Expected to work on multiple projects, project dead line, adhere to coding guidelines and update your progress on the project on a weekly basis to your immediate supervisor.
    3. Developing the software strictly as per the requirement specification, design and Bug free.
    4. Responsible for building a trouble-free system to the satisfaction of the customer.
    Installation
    1. Responsible for installation of hardware and software at customer site for coordinating with the vendor and Manager – Sourcing to see that works done by the vendor is as per requirement specification
    Customer Support
    1. Responsible for providing support to the customer on the system supplied by the Captronic Systems in the past as well as present.
    2. Attends to the support case within 48hrs(local) / 96hrs(outstation ) / 96hrs(out of warranty) of reporting and collecting the Support Closure Report from the customer and submit it to the SBU-HEAD
    3. Informs Support executive with Support Status, Action Taken and Support Closed On
    Training
    1. Responsible for providing training to customer on the systems supplied by Captronic Systems.
    2. Responsible for in-house training to newly recruited engineers.
    Testing
    1. Responsible for testing code developed by you, by another developer and testing entire system at the customer site.  
    2. Responsible for testing hardware supplied by Captronic System and log the test report on the hardware test register.
    Sales Support
    1. Expected to travel with sales team to provide support to sales-team in proposal making at short notice and perform flawless pre-sales system and requirement study.
    General
    1. Expected to take part in technical sessions and keep yourself abreast with the recent product released and technical advancement made
    2. Expected to become domain expert is at least one field and to constantly improve coding style and knowledge.
    Quality
    Responsible for implementing the project methodology and quality policy of the company for all activities under your purview
     Interested candidates may forward your resumes witheir current CTC and notice period to [email protected] . Salary is never the Constraint.

    SANDU SUNITHA
    D/o.S. Venkateshwarlu,
    H.No:11/57, Kothapeta,
    Maruthi Nagar,Dhone,
    Kurnool (Dt.),
    Andhra Pradesh.
    E-Mail:[email protected]
    Mobile : 91-9963586292/08884822259
    Date: 09/ 05/ 2013
    Respected Sir/Madam,
    I have done my masters in  Control Systems Engineering in Electrical
    branch from Malla Reddy College of  Engineering. I am a well organized
    person, with good knowledge about the subject, able to do
    multitasking, able to work within a team and have excellent
    communication skills. As a good Engineer and excellent team player I
    can handle the responsibilities and challenges of the post of an good
    engineer to its fullest.
    I have worked for 6 Months as Project Trainee in CSR INDIA PVT LTD. My
    responsibilities in that institute include Testing, Reporting and
    Debugging, Updating the bugs as a trainee fresher. I was a part of the
    team that designed MERCURY TESTING TOOL, world's Best Automation tool
    today. I tested the model and executed the changes.And i had worked as
    Project Engineer in FUSION ELECTRONICS on Wonder ware SCADA. Presently
    working as Project Scientist in NAL (National Aerospace Laborateries)
    under Research and Development of IVHM(INTEGRATED VEHICLE HEALTH
    MANAGEMENT) Project on MATLAB/SIMULINK ,Labview ,Wireless Sensor
    Networks,WatchDog and Testing.
    Here is the list of the documents enclosed with this cover letter.
     1. Resume
    I hope that you find these of worth. I assure you that if selected; I
    will not let you down and would prove to be an asset for your reputed
    industry.
    Sincerely yours,
    SANDU SUNITHA
    Attachments:
    SANDU_SUNITHA(29_Apr_2013).doc ‏176 KB

  • Pros and cons in setting AD domain trust into my AD domain for more than 10+ AD domain and some with same FQDN or label ?

    Hi,
    Can someone please share what is the pros and Cons of trusting AD domain for more than 10 different AD sites into my existing single domain forest let say ParentCompany.com ?
    At the moment I only have one single forest AD domain with the Domain and Forest functionality Windows Server 2003. The main domain controller FSMO role holder is in the Data Center spread across three different VMs running on Windows Server 2008 R2.
    The main/parent company has acquired smaller business chain of 15+ offices in which they have their own Domain Controller and also their own domain, sometimes they also got the same AD domain between them (no trust or whatsoever in those 15+ AD domain).
    Sounds crazy but yes, there is no standardization in them or whoever manage their IT infrastructure previously.
    I'm now considering what are the benefits of creating the AD domain and trust versus importing those AD objects into my domain and then decommission them.
    No need to worry about Exchange Server since all of the user in those sites connecting to the RDS to my ParentCompany.com terminal servers.
    My requirements or goal are as follows:
    1. Simplify the AD domain structure & maintenance
    2. Try to avoid the disruptions of the user in terms of downtime and selecting multiple different domain everytime they login to their PC or SharePoint sites.
    any kind of help and suggestion would be greatly appreciated.
    Thanks.
    /* Server Support Specialist */

    Can someone please share what is the pros and Cons of trusting AD domain for more than 10 different
    AD sites into my existing single domain forest let say ParentCompany.com ?
    I think you mean 10 AD domains.
    Managing multiple domains can be difficult for administration. I usually recommend using a single domain in a single forest with OUs to separate resources whenever it is possible.
    However, if you can't do that then you can simply create trust relationships between your domains. The advantage is that you can enable access to resources to different domains. I do not see cons here.
    The main/parent company has acquired smaller business chain of 15+ offices in which they have
    their own Domain Controller and also their own domain, sometimes they also got the same AD domain between them (no trust or whatsoever in those 15+ AD domain). Sounds crazy but yes, there is no standardization in them or whoever manage their IT infrastructure
    previously.
    I'm now considering what are the benefits of creating the AD domain and trust versus importing those
    AD objects into my domain and then decommission them.
    I would recommend consolidating your domains into a single one. ADMT is a migration tool that you can use. The advantage would be the ease of administration. Also, by having multiple DCs for the same domain across sites, you will take benefit of High Availability
    of your and DRP.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

Maybe you are looking for