GR for Order (MVT 101) - Error - Table entry does not exist

I am getting error while posting GR for production order via MVT 101.
After resolving errors on G/L account and cost element, now this is the only error that I can't seem to resolve:
Check table TFBEFU_CR: entry 10 does not exist
Message no. M7001
Using SE16 I tried to check for this table, but system says it is not active in dictionary.
Please help.

Hi                                                                               
Please, kindly check the note  183647 - Error message M7001.                                                                               
As indicated in it, please, maintain the customizing entry in  transaction OPK9 for your valuation area and re-test the system behaviour afterwards.                                                    
Regards,
Mauro

Similar Messages

  • OTEXBAS add on installation error: table ZAUTHCUST does not exist

    HI,
    i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
    kindly suggest how to resolve this issue.
    the import log is below:
    ABAP Dictionary: Activation
    Transport request   : SAPK-301COINOTEXBAS
    System              : SPS
    tp path             : tp
    Version and release: 376.03.74 701
    Program start============================================================
    Mass Activation
    =========================================================================
    Process..................: mb4ba1025vs_12
    User.....................: DDIC
    Date, time...............: 24.03.2014, 13:32:52
    Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
    Tool.....................: BATCH/RADMASG0
    Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
    Program parameters:
    Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
    Activation Method..........: Inactv.
    Chk Mode...................: T
    Version to be activated....: M
    Versions to be deleted.....: All versions are deleted
    Lock Against Paral. Exec...: Shared
    Independent Statistics Log.: being written
    Parallel Mode..............: Switched on
    ..Resources................: 50% of Dialog Processes, Maximum 4 Processes
    .Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
    =========================================================================
    *** Activate objects at level 2
    *** Activate objects at level 3
    *** Activate objects at level 4
    Table ZAUTHCUST does not exist
    *** Activate objects at level 5
    *** Activate objects at level 6
    *** Activate objects at level 7
    *** Activate objects at level 8
      *** Activate objects at level 9
      *** Activate objects at level 10
      *** Activate objects at level 11
      *** Activate objects at level 12
      *** Activate objects at level 13
      *** Activate objects at level 14
      *** Activate objects at level 15
      *** Activate objects at level 16
      *** Activate objects at level 17
      *** Activate objects at level 18
      *** Activate objects at level 19
            Object Activation
      End phase  001 ***********************************************************
      Start phase 002 **********************************************************
            Final log
      Following objects not activated/deleted or activated/deleted w. warning:
      (W- Enhancement category for include or subtype missing )
      (W- Enhancement category for include or subtype missing )
      (W- Enhancement category for include or subtype missing )
      (W- Enhancement category for include or subtype missing )
      Table ZAUTHCUST could not be activated
            Final log
      End phase  002 ***********************************************************
      Start phase 003 **********************************************************
            Statistics on Activated and Deleted Objects
      Number of objects to be activated............:  2276
      Objects not activated........................:  1
      Activated objects with errors in dependencies:  1
      Objects activated with warning...............:  1715
      Successfully activated objects...............:  559
      Number of objects to be deleted..............:  0
      Objects not successfully deleted.............:  0
      Successfully deleted objects.................:  0
      Tables/views with DROP/CREATE................:  0
      No. of them marked for DROP/CREATE: 0
      Not marked for DROP/CREATE: 0
      Number of nametabs to be deleted.............:  0
      Successfully deleted nametabs................:  0
      Nametabs that were not successfully deleted..:  0
            Statistics on Activated and Deleted Objects
      End phase  003 ***********************************************************
      =========================================================================
      Mass Activation
      =========================================================================
      Process..................: mb4ba1025vs_12
      Return code..............: 8
      Phase 001..................: 00:00:41 (Object Activation)
      Phase 002..................: 00:00:01 (Final log)
      Phase 003..................: < 1 sec. (Statistics on Activated and ...)
      Program runtime..........: 00:00:46
      Date, time...............: 24.03.2014, 13:33:38
      Program end==============================================================
      ABAP Dictionary: Activation
      End date and time : 20140324133339
      Ended with return code:  ===> 8 <===

    Mamta:
    I am not sure why you post these in the SAP for Utilities space.  this is for the Utilities industry.  I will move this one to ILM.
    regards,
    bill.

  • Add on OTEXBAS installation error: table zauthcust does not exist

    HI,
    i am installing an add on OTEXBAS. The installation terminated returning the error--- ZAUTHCUST does not exist.
    kindly suggest how to resolve this issue.
    the import log is below:
    ABAP Dictionary: Activation
    Transport request   : SAPK-301COINOTEXBAS
    System              : SPS
    tp path             : tp
    Version and release: 376.03.74 701
    Program start============================================================
    Mass Activation
    =========================================================================
    Process..................: mb4ba1025vs_12
    User.....................: DDIC
    Date, time...............: 24.03.2014, 13:32:52
    Platform.................: CUSTOMER-SPS(701)/MSSQL/WindowsNT/mb4ba1025vs
    Tool.....................: BATCH/RADMASG0
    Log......................: F, \\mb4ba1025vs\sapmnt\trans\tmp\SAPA-301COINOTEXBAS
    Program parameters:
    Input Medium...............: Transp. Request SAPK-301COINOTEXBAS
    Activation Method..........: Inactv.
    Chk Mode...................: T
    Version to be activated....: M
    Versions to be deleted.....: All versions are deleted
    Lock Against Paral. Exec...: Shared
    Independent Statistics Log.: being written
    Parallel Mode..............: Switched on
    ..Resources................: 50% of Dialog Processes, Maximum 4 Processes
    .Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
    =========================================================================
    *** Activate objects at level 2
    *** Activate objects at level 3
    *** Activate objects at level 4
    Table ZAUTHCUST does not exist
    *** Activate objects at level 5
    *** Activate objects at level 6
    *** Activate objects at level 7
    *** Activate objects at level 8
      *** Activate objects at level 9
      *** Activate objects at level 10
      *** Activate objects at level 11
      *** Activate objects at level 12
      *** Activate objects at level 13
      *** Activate objects at level 14
      *** Activate objects at level 15
      *** Activate objects at level 16
      *** Activate objects at level 17
      *** Activate objects at level 18
      *** Activate objects at level 19
            Object Activation
      End phase  001 ***********************************************************
      Start phase 002 **********************************************************
            Final log
      Following objects not activated/deleted or activated/deleted w. warning:
      (W- Enhancement category for include or subtype missing )
      (W- Enhancement category for include or subtype missing )
      (W- Enhancement category for include or subtype missing )
      (W- Enhancement category for include or subtype missing )
      Table ZAUTHCUST could not be activated
            Final log
      End phase  002 ***********************************************************
      Start phase 003 **********************************************************
            Statistics on Activated and Deleted Objects
      Number of objects to be activated............:  2276
      Objects not activated........................:  1
      Activated objects with errors in dependencies:  1
      Objects activated with warning...............:  1715
      Successfully activated objects...............:  559
      Number of objects to be deleted..............:  0
      Objects not successfully deleted.............:  0
      Successfully deleted objects.................:  0
      Tables/views with DROP/CREATE................:  0
      No. of them marked for DROP/CREATE: 0
      Not marked for DROP/CREATE: 0
      Number of nametabs to be deleted.............:  0
      Successfully deleted nametabs................:  0
      Nametabs that were not successfully deleted..:  0
            Statistics on Activated and Deleted Objects
      End phase  003 ***********************************************************
      =========================================================================
      Mass Activation
      =========================================================================
      Process..................: mb4ba1025vs_12
      Return code..............: 8
      Phase 001..................: 00:00:41 (Object Activation)
      Phase 002..................: 00:00:01 (Final log)
      Phase 003..................: < 1 sec. (Statistics on Activated and ...)
      Program runtime..........: 00:00:46
      Date, time...............: 24.03.2014, 13:33:38
      Program end==============================================================
      ABAP Dictionary: Activation
      End date and time : 20140324133339
      Ended with return code:  ===> 8 <===

    Hi Mamta,
    Refer to Troubleshooting section of below SAP note
    1143352 - SAP Archiving/Document Access by Open Text Installation
    Hope this helps.
    Regards,
    Deepak Kori

  • Error Entry does not exist in J_1BNFITMRULE (check entry) Nfe 10 Incomig

    Bom dia pessoal.
    Ao tentar executar um dos passos no cenário de compras normais, (Assign Purchase Order), o seguinte erro ocorreu
    Entry does not exist in J_1BNFITMRULE (check entry).
    Detalhe: Para o mesmo pedido ja havia sido efetuada 3 entradas via monitor sem qualquer erro.
    Qualquer ajuda será muito bem vinda.
    At
    Pedro L Nobrega
    Pessoal
    Ja descobri o que aconteceu, na categoria de nota fiscal, retiraram tipo de item da categoria que estava sendo utilizada.
    (Projeto global).... acontece.
    Para evitar este tipo de problema novamente criei uma categoria especifica para o Incoming. (Compras Normais.)
    Erro corrigido.
    Abs
    Pedro L Nobrega
    Edited by: Pedro Luiz Nobrega on Jan 25, 2012 3:56 PM

    Resolvido
    Criamos uma categoria especifica para nfe incoming (Compras Normais), para que não ocorra novamente o erro,
    a nota que estava sendo utilizada tinha na configuração tipo de item que foi retirado o gerou o erro.
    Grato
    Pedro L Nobrega

  • Error "Item 000010 does not exist" while creating sales order in VA01

    Dear All,
    As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level)  by customer enhancement.
    Enhancement:       V45A0003
    Function Module:    EXIT_SAPMV45A_003
    INCLUDE:                ZXVVAU05
    Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
    system will throw error message accordingly.
    It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
    But after the error message is displayed if we try to save the sales order  again system throws a STOP message as a POPUP
    saying "Item 000010 does not exist".
    Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
    Please let me know your valuable input on this.
    Regards
    Arindam
    Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PM

    It sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables.  Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s).    This may be resulting because your internal tables are now inconsistent.
    Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
    Edited by: Breakpoint on Mar 11, 2010 3:29 PM

  • Entry does not exists in check table -- Validation

    Hi friends..,
      I am able to create new entries in my table with INSERT statement through a function module.
    But, the problem is..,
    I am having one key field in my table, and T1(another table) is check table for this.
    So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
    Any extra settings reuired for this..?
    Or.,
    Am i need to write validation code?
    Thanks,
    Naveen.I

    Hi...Rama chary..,
    I am having separate function modules to do this..!
    So here I can't to update two table at time.
    My function module updating a table field with out checking it wrt its check table..!
    Even i write code to check table , it will not meet the functionality of SE11 error..!??
    so what can i do..?
    Thanks,
    Naveen.I

  • Error:   Table TEMPLATE_HEADER does not fit into window.

    Hello Experts ,
    I met a very strange problem.
    I am printing a process order using smartform.
    for other process nrs , print perfect.
    But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
    At beginning , I suppose my table line extend the mainwindow width. But infact , no!
    I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
    so , does someone met this error before ?
    Please help me!!
    Regards
    Kevin

    Hi Kevin,
    Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
    must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
    For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
    If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
    Regards,
    Aidan

  • Sales Order Error Message 'Product does not exist in system'

    Hi Gurus,
    we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
    Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
    Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
    We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
    We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
    Please help me with that issue. Your help will be highly appreciated!!!
    Kind regards
    Hannes

    Solved with the help of SAP.
    Keywords: COM_PRODUCT
    COM_PRODUCT_GUID_GET_INTERNAL
    CONVERSION_EXIT_PRID1_INPUT
    CRM_ORDERADM_I 501
    Relevant notes:
    Note 1449146 - Dump While Creation IP via WebUI
    Note 1445079 - Unable to add products to contract
    The notes do not exactly described our issue but the code corrections were still relevent for us.

  • The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

    The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
    We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
    and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
    The SQL Server Analysis Server is 2012 SP1

    Hi RB_ORIPW,
    The table with name of 'XXX' doesn't exist.
    An error occurred when loading the model(Micorsoft.AnalysisServices)
    If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
    The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
    You can access Windows Event logs via "Administrative Tools" --> "Event Viewer".  SSAS error messages will appear in the application log.
    The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
    Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
    Data collection for troubleshooting Analysis Services issues
    Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
    http://support.microsoft.com/kb/2897263/en-us
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID:

    Expert,
    I did the following steps to upgrade the OWB repository from 10g to 11g
    • Created a dummy workspace in the 11.2 repository
    • Created users in the destination environment
    • Run Repository Assistant against the 11.1 source database
    • Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
    After 99% of completing I have got the below error
    Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID: 65314
    Please let me know the solution.
    Thanks,
    Balaa...

    Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
    Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
    refer
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    This will give you info about your missing ACL
    Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
    please refer :
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
    Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
    Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
    Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
    It might resolve this ACL issue but it did not work for me.
    If none of these work then
    Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
    It worked for me.
    Varun

  • Error : DB Mapping does not exist for the Host in iSetup

    Hi Experts,
    We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
    Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
    EBS Version : 12.1.1 with 11.1.0.7 DB
    OS : RHEL 5.3 x86_64
    Any idea much Appreciated .
    Thanks in advance,
    Regards,
    900076.

    900076 wrote:
    Hi Experts,
    We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
    Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
    EBS Version : 12.1.1 with 11.1.0.7 DB
    OS : RHEL 5.3 x86_64
    Any idea much Appreciated .
    http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
    http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
    Thanks,
    Hussein

  • Transporting Process Chain - error  Source system does not exist

    Hi,
    I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
    However, I got the following transport error: Source system does not exist
    =======
    Diagnosis
    Source system  is not known.
    System Response
    The imported data for DataSource  was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
    Procedure
    Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
    You get to maintenance using Tools -> Conversion of the logical system names.
    ============
    I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
    And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
    FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
    Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
    Thanks

    Hi,
    This error is due to the fact that the
    mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
    You need to maintain table RSLOGSYSMAP in each system
    You can find the steps to do it in the attached note 127326:
    o  Maintain table 'RSLOGSYSMAP' in the target BW with view
       'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
       This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
    This source system reference in turn is absolutely necessary to activate the transfer structure.
       Example:
       Source BW with source system AAA.
       Target BW with source system BBB where the source system AAA
       corresponds to the source system BBB.
       Entry in RSLOGSYSMAP in the target BW:
       Original source system: AAA, target source system: BBB.
       Give the DDIC user in the source BW in client 000 the
       authorization profile S_RS_ALL to create BW objects.
    Cheers
    Rajesh

  • Table TTZDF does not exist on database

    HI forum
    i am installing the last SAPIDES Ehp3 Linux / Maxdb during the process of installation all job were imported sucessfully 32 of 50 , in the phase CHECK DDIC PASSWORD, the system can´t do log in.
    Review the log in the work directory (dev_w0) the follow message is generated.
    A Sat Jun 12 21:19:56 2010
    A  **GENER Trace switched off ***
    B  dbmyclu : info : my major identification is 3231713892, minor one 0.
    B  dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
    B  dbmyclu : info : my initial uuid is CF0B144C2E40F845E1000000C0A00A64.
    B  dbmyclu : info : current optimistic cluster level: 2
    B  dbmyclu : info : pessimistic reads set to 2.
    C 
    C Sat Jun 12 21:20:15 2010
    C  *** ERROR =>   prepare() of C_0063, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28435b8,no=63,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x19449e10,table=TTZDF                        
    C  SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
    C   WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT"  WITH LOCK ISOLATION LEVEL 1;
    B  ***LOG BZA=> table TTZDF      does not exist on database R/3       
    B  *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
    C  *** ERROR =>   prepare() of C_0063, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28435b8,no=63,idc_p=0x2b4da2909220,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x19449e10,table=TTZDF                        
    C  SELECT  /*+ KEYACCESS  */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
    C  IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
    B  ***LOG BZA=> table TTZDF      does not exist on database           
    B  *** ERROR => missing return code handler     
    abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]     
    ==> calling sap_dext to abort transaction
    C 
    C Sat Jun 12 21:20:26 2010
    C  *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28436e8,no=65,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x1944e480,table=TTZDF                        
    C  SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
    C   WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT"  WITH LOCK ISOLATION LEVEL 1;
    B  ***LOG BZA=> table TTZDF      does not exist on database R/3       
    B  *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
    C  *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF                        
    C  SELECT  /*+ KEYACCESS  */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
    C  IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
    B  ***LOG BZA=> table TTZDF      does not exist on database           
    B  *** ERROR => missing return code handler     
    abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]     
    ==> calling sap_dext to abort transaction
    C 
    C Sat Jun 12 21:20:28 2010
    C  *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF                        
    C  SELECT  /*+ KEYACCESS  */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
    C  IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
    B  ***LOG BZA=> table TTZDF      does not exist on database           
    B  *** ERROR => missing return code handler     
    abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]     
    ==> calling sap_dext to abort transaction
    C 
    C Sat Jun 12 21:20:30 2010
    C  *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF                        
    C  SELECT  /*+ KEYACCESS  */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
    C  IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
    B  ***LOG BZA=> table TTZDF      does not exist on database           
    B  *** ERROR => missing return code handler     
    abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]     
    ==> calling sap_dext to abort transaction
    C 
    C Sat Jun 12 21:20:31 2010
    C  *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF                        
    C  SELECT  /*+ KEYACCESS  */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
    C  IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
    B  ***LOG BZA=> table TTZDF      does not exist on database           
    B  *** ERROR => missing return code handler     
    abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]     
    ==> calling sap_dext to abort transaction
    C 
    C Sat Jun 12 21:21:18 2010
    C  *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF                        
    C  SELECT  /*+ KEYACCESS  */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
    C  IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
    B  ***LOG BZA=> table TTZDF      does not exist on database           
    B  *** ERROR => missing return code handler     
    abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]     
    ==> calling sap_dext to abort transaction
    C 
    C Sat Jun 12 21:21:21 2010
    C  *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
    C  sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF                        
    C  SELECT  /*+ KEYACCESS  */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
    C  IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
    B  ***LOG BZA=> table TTZDF      does not exist on database           
    B  *** ERROR => missing return code handler     
    abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]     
    ==> calling sap_dext to abort transaction
    C 
    C Sat Jun 12 21:21:29 2010
    C  *** ERROR =>   prepare() of C_0066, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
    C  sc_p=0x2b4da2843780,no=66,idc_p=0x2b4da29093e8,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x194421a0,table=TTZDF                        
    C  SELECT  /*+ KEYACCESS  */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
    C  IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
    B  ***LOG BZA=> table TTZDF      does not exist on database           
    B  *** ERROR => missing return code handler     
    abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]     
    ==> calling sap_dext to abort transaction
    M  ***LOG R47=> ThResFree, delete (001024) .
    I search notes and in sdn forum any information about this error, but there isn´t information.
    How i can solve this inconsistence durant the installation for finish the SAP IDES installation.
    Hi forums
    cheking the process of the installation, the problem i wait have it  solve doing the reinstallation with any  adjust in the database release .. i will be comment the process to the solution.
    Jairo

    thie process was solved with a new installation-

  • Career and Job Error - Area EMPLOYEE_CAREER_ERP2005 does not exist

    Hi Experts,
    We are getting following error while click on Career and Job tab on ESS. We checked in Table V_T7XSSSERARB. Entry is maintained.
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
      Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist  
    Would appreciate kind guidance on this.
    Thanks,
    Aashish

    Waiting for experts comment. We checked services are defined in iViews,Pages,Roles and WorkSet but couldn't resolve issue. Entry also exist in SAP configuration.
    ERROR IS AS FOLLOWS :
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:235)
         at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
         at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
         at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
         at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
         at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
         at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
         at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
    Would really appreciate kind guidance.
    Thanks,
    Aashish
    Edited by: Aashish Brahmbhatt on Oct 2, 2008 10:08 PM

  • DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

    Hi All,
    We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
    Can anyone advise how to solve the issue? Please find below portion of the short dumps.
    Category               ABAP Programming Error
    Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
    ABAP Program           SAPLCLVF
    Application Component  CA-CL-CL
    Date and Time          11.06.2014 12:08:28
    Short text
         A table is unknown or does not exist.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLCLVF" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         A table is referred to in an SAP Open SQL statement that either does not
          exist or is unknown to the ABAP Data Dictionary.
         The table involved is "AUSPN_V1" or another table accessed in the statement.
    Source Code Extract
    Line  SourceCde
      104     if dupl = kreuz.
      105       insert auspc_v2 client specified from table auspcv2
      106                              accepting duplicate keys.
      107     else.
      108       insert auspc_v2 client specified from table auspcv2.
      109       if syst-subrc ne 0.
      110         message a585 with tabausp.
      111       endif.
      112     endif.
      113     refresh auspcv2.
      114   endif.
      115   read table auspcv3 index 1.
      116   if syst-subrc = 0.
      117     if dupl = kreuz.
      118       insert auspc_v3 client specified from table auspcv3
      119                              accepting duplicate keys.
      120     else.
      121       insert auspc_v3 client specified from table auspcv3.
      122       if syst-subrc ne 0.
      123         message a585 with tabausp.
      124       endif.
      125     endif.
      126     refresh auspcv3.
      127   endif.
      128   read table auspnv1 index 1.
      129   if syst-subrc = 0.
      130     if dupl = kreuz.
      131       insert auspn_v1 client specified from table auspnv1
      132                              accepting duplicate keys.
      133     else.
    >>>>>       insert auspn_v1 client specified from table auspnv1.
      135       if syst-subrc ne 0.
      136         message a585 with tabausp.
      137       endif.
      138     endif.
      139     refresh auspnv1.
      140   endif.
      141   read table auspnv2 index 1.
      142   if syst-subrc = 0.
      143     if dupl = kreuz.
      144       insert auspn_v2 client specified from table auspnv2
      145                              accepting duplicate keys.
      146     else.
      147       insert auspn_v2 client specified from table auspnv2.
      148       if syst-subrc ne 0.
      149         message a585 with tabausp.
      150       endif.
      151     endif.
      152     refresh auspnv2.
      153   endif.

    Hello
    Please check on transaction SE11 if this table exists and if it is active.
    Also, it may be a database issue. What is your database?
    BR
    Caetano

Maybe you are looking for