GR/GI Indivitual and Collective slip

Hi All,
I am facing issue for the GI. I am creating a material document with multiple line items. When i tried to save the document with Individual slip, It print's fine (each line item per page). When i tried to save the document with Collective slip option, it should print all line items in a single page. Which it's not happening and it's printing as like Individual slips.
I have checked the config. Config details are below.
Output TYPE: WA01
Program : SAPM07DR
Form name: WA_SCHEINVERS1
Form routine: ENTRY_WA01
Everything is standard, I want to make sure any configuration is missing or for collective slip we need consider any other things.
Point's will be rewarded.
Regards,
Hemanth.
Edited by: keerthipati hemanth on Oct 7, 2008 11:31 AM
Edited by: keerthipati hemanth on Oct 7, 2008 1:08 PM

hi hemanth
For Movement Type: 313, Stock is transferred from the Issuing S.Loc to the Transit and Transfer (You can see in T-Code: MB52 Column: Transit & Transfer) and you have to do the Movement Type: 315 for removing from the Transit to the Receiving S.Loc.
So when we take the printout of the material doc with movement type: 313 only Issuing S.Loc will be updated in the script and automatically generated item in the Mat Doc will not be printed. Once you Process the material doc with 315 Mvt Type you get the print out of the Receiving S.Loc.
If they want the both the line items in the Mvt Ty:313 Mat Doc you can develop a Z Script and attach to the Output type. You will get all
the information from Table: MSEG.
-ashok

Similar Messages

Problem with printout for Mvtype 551 and Collective slip

Hi there!
Need some help.
Well, I have several items and when posting them with 551 in MIGO and check printing active on collective slip (3), the printout does not show any of items.
When posting it with same MvType 551 and check printing active on other two values (1 or 2), I get 1 printout for every item.
So, what should I do to have one printout for all items for MvType 551?
Thanks!

Hi Ines,
Go to NACE, select ME (Inventory Mgmt), click on procedures, select Inventory Mgmt, click on control.
Here you should find an entry for your condition type there should an entry with requirement type having a value, for GR it is 173, so for your case, check which one applies.
If helpful award points
Regards,
Vivek

Goods Receipt Collective Slip for Mat Doc is not printing

HI All,
I have a strange issues. I'm trying to print collective slip for Goods Receipt which is created against of PO.
I able to print Individual Slip when i create GR(Mat Doc) against PO with movement type 101. But I'm not able to print the Collective Slip when I create GR(Mat Doc) against PO with movement type 101. I'm saving the GR document by selecting collective slip. Error I'm getting is "The system could not create Output".
I check the condition records in MN21, condition record is in place.
I check in OMB5, for movement type and material document configuratio its there.
I check in NACR, condition record is there.
I found that In table NAST, entry for GR document created using collective slip is not available, but Individual slip GR Doc entries are there in NAST table.
any help on this matter is highly appreciated.
I check in SDN, Googled it, but no result.
Thanks in Advance.

check this
2. Before you set up the output determination, you have to run the program RM07NCUS for each client in which you want to use the output determination function.
This program copies the basic settings from the SAP standard client (000).
from there:
http://help.sap.com/saphelp_46c/helpdata/en/ed/6cec6eb435d1118b3f0060b03ca329/content.htm
and check you have define some printer for the output.

POSTING_ILLEGAL_STATEMENT in MIGO for collective slip

Hi all.
I am using smartforms for printing GI slips in MIGO. The problem is that when i want to print the document for collective slip i get a short dump with error: POSTING_ILLEGAL_STATEMENT. I have looked over the internet for a solution but i could not find one.
Any ideas ?
Regards,
Cristian.

Hi,
For correct and quick response, Try posting your question in this forum -
SAP Community Network Forums » SAP Solutions » ERP SD Sales
Thanks,
Shambhu.

BAPI_GOODSMVT_CREATE u2013 Collective slip not printed when called from Biztalk

Hi Experts,
Iu2019m trying to call BAPI_GOODSMVT_CREATE from within a Biztalk Orchestration.
Everything works fine except for one thing: The printing of the collective slip.
I made a quick test and the collective slip is printed when I call BAPI_GOODSMVT_CREATE from transaction SE37 (Test Sequences).
I have used exactly the same parameters for the two cases.
I can see that when I call the BAPI from SE37, an output is generated for the material document (MB03 / details / messages).
This is not the case when the call comes from Biztalk.
I followed the documentation and the notes 520813 (Question 12), 426554.
This means that:
- The user executing the BAPI has the parameter NDR set to u2018Xu2019 in his profile.
- VER_GR_GI_SLIP is set to u20183u2019 to ask for the collective slip print out.
- VER_GR_GI_SLIPX is set to u2018Xu2019 to enable the print out.
What should I do to be able to print a collective slip when calling the BAPI from Biztalk ?
Thank you in advance for your help,
Francisu2026

hi,
check out this thread.
Re: User Exit for MSC2n( Batch) while doing a Good receipt for an order
Ashutosh

N0 Collective slip is printing in MB90

Hi Experts,
I maintained configuration settings and condition records for both out put types WE01 and WE03.
When I do the GR Collective slip in the general tab is automatically activated and I can see the both out put types WE01 and WE03 in the out put tab.
but in MB90 system is showing only WE01 condition type and not showing the WE03 condition type .Here I need to print the collective slip for that GR document.
Any Inputs are greatly appreciated....
Regards,
Devi...

Hi
Please check in NACE and ME ( Inventory) there will be conditions WE01/WE02/WE03 ETC attached to the procedure just like pricing procedure check it there, if existing there should be no reson why it should not show up in MB90. Just check for condition records with WE01 & WE03 and the printer assignments , and print details. When taking print out in MB90, do not enter any output type but enter other details except for Material doc no... lok whether system is picking the output types pertaining to WE03 or not.
Regards
Samuel

Printing problem with GR collective slip

Moderator message: Please do not post the same question in more than one forum. Duplicate rejected.
Hi all,
When I print GR collecive slip , it is not printing with standard forms iteslf. I m using standard form and print program. It is priting Individual slip properly. I want to print more than one line item in single page itself. Is there any configuration is there for WE03 ? or Need to code in form ? please help me on this
Using WE03 , Collective slip, checked ITEM OK
Thanks
JK
Edited by: Matt on Jan 23, 2009 9:34 AM
Edited by: Matt on Jan 23, 2009 9:34 AM

you need to write logic for multiple items, copy the print program and cnage the logic...

Print of all the document no In MB90 by collective slip

Hi All,
we want to print of all the document no. we put in MB90 from and to.
collective slip already mark in MIGO output.please guide what has to be done in configuration.
Or there is another Tcode where we solve this issue.
Thanks in advance.
Kunwar

Hi Kunwar,
first check, Have you created message for all the documents and what is the dispatch time in the message. You have to select option no. 3 ( send with application own transaction) for output type WE03.
SPRO >> Materials Management >> Inventory Management & Physical Inventory >> Output Determination >> Maintain Output types >> Click on Output type go to default values and set the dispatch time as 3
Hope this will help you.
Regards,
Manish Jain

WE03 Output type with print version '3' (Collective Slip)

I am using output type WE03 with combination of print version 3 (Collective Slip) to print GR slips.
My requirement is to print all the line items on single page (unless there is no room) .
However with this output type one line item is printed per page.
Does anyone manage to print items continously on the page without page break?
Is there any other output type/print version for that?
Well, the last option will be to change the print program and sapscript, but I am trying to avoid that...

Created new print program and replaced sapscript with smartform

Printing Indicator (Individual/Collective Slip) at Display MIGO GR document

Hi, Good Morning...
FYI , I 've been check Collective slip indicator when prepare GR document. Once after press CHECK and POST button, system will generate document GR number. Then I just want to display the document again. When system prompt out, we discovered there is not in collective slip indicator status but it become individual slip. Any Other suggestions?

The system is default to pick the individual slip. Are you getting the print from MB90. If yes, then you dont need to worry on this one. On some systems I have seen all 3 options, mapped as collective slip for convenience of users, so that whatever they choose, it doesnot effect the print. Only main thing here is to get the Print active check enabled. If not the print will not go to MB90.
Usually I make the Print check button mandatory, so that material document is not saved without this check.
Edited by: Afshad Irani on Apr 28, 2010 7:33 AM

What is difference between Iterator and Collection Wrapper?

Hi all,
I dont understand the actual difference between Iterator and Collection Wrapper. I observed both are used for the same purpose. Could any one please let me know when to use Collection Wrapper and when to use Iterator??
Thanks,
Chinnu.

L_Kiryl is right.
Collections support global iteration (through collection->get_next( )) and local iteration (through iterator->get_next( )).
Each collection has a focus object. Initially, the first object has the focus.
Any global iteration moves the focus, which is published by the event FOCUS_CHANGED of the collection.
If you want to iterate on the collection without moving the focus (and without triggering timeconsuming follow-up processes) you can use local iteration. To do so, request an iterator object from the collection and use this to iterate.
And one more advantage of using iterator: it takes care of deleted entities. If you use global iteration then when you reach deleted entity it will be an exception. But there is no exception with iterator in the same situation.

How do find Oustanding Sales Report and Collection Report for A/R Invoice

Dear All,
I need to find the Sales Outstanding amount and Collection details like Check or Cash Or RTGS this is including A/R Invoice Amount and JE Pending Amount. Is it possible?
Kindly any body let me know some idea or if any sql query, plz send me.
Advance Thanks to all.
Regards,
A. Anvar

Hi!
Check this, with little modification you can get the report i think
Declare @FromDate as Datetime
Declare @ToDate as Datetime
SET @FromDate = (Select Min(S0.TaxDate) from ORCT S0 where S0.TaxDate >='20110201')
SET @ToDate = (Select Max(S1.TaxDate) from ORCT S1 Where S1.TaxDate < ='20110228')
Select R0.TaxDate,R0.Docnum,R0.CardCode,
'Cash' [Payment Mode],R0.CashSum [Amount] from ORCT R0
Where
R0.TaxDate >=@FromDate and R0.TaxDate <=@ToDate and R0.Canceled = 'N'
Union All
Select R0.TaxDate,R0.Docnum,R0.CardCode,
'Cheque' [Payment Mode],R0.CheckSum [Amount] from ORCT R0
Where
R0.TaxDate >=@FromDate and R0.TaxDate <=@ToDate and R0.Canceled = 'N'
Union All
Select R0.TaxDate,R0.Docnum,R0.CardCode,
'Discount' [Payment Mode],R0.TrsfrSum [Amount] from ORCT R0
Where
R0.TaxDate >=@FromDate and R0.TaxDate <=@ToDate and R0.Canceled = 'N'

Dunning by dunning procedure and collection strategy

Hi All,
Have some questions around dunning.
1. Can dunning by dunning procedure and collection strategy coexist in the same company code - if this cannot be achieved by config can it be achieved by development - can we have something like account determination IDs of X to use dunning procedure, account determination IDs of Y to use collection strategy?
2. If the answer to 1. is no, can one company code use dunning procedure and another company code use collection strategy?
3. What is SAP's (or any other proven) recommended approach to migrate a production system utilising dunning by dunning procedure to dunning by collection strategy?
Cheers.

Have a look
SAP-ISU will be used to carry out initial collection activities. Initial 1 or 2 reminder letters (based on the customer type, Live or Closed) will generated from SAP-ISU. Thereafter, the account will be managed in Tallyman. Thus, all the subsequent activities, such as sending further reminder letters, sending debt to collection agencies, carry out warrant activities and taking customers to court will be carried out in Tallyman system. During the time, the account is in Tallyman, no dunning activities will be carried out in SAP.
There will be daily interfaces from SAP-ISU to Tallyman to update Tallyman of Accounts that have passed a certain dunning level in SAP-ISU and any changes to the account that are currently being managed in Tallyman. Similarly there will be interfaces from Tallyman to SAP to update SAP of Accounts, that have been marked for write off in Tallyman. Fees and Charges that have been applied in Tallyman, for example court fees, warrant fees etc.
Regards
Shashi
Edited by: shashi jha on Mar 31, 2010 8:10 AM

I D/L'd a trial version of LR 5 and lost all my catalog and collections in LR 4. What can I do to get them back?

Yesterday I D/L'd a trial version of LR 5.6 and during installation it seemed to be copying my catalog from my LR 4.4. Now nearly all of my catalog and all my collections in LR 4 have disappeared. What has happened to them andhow do I get them back. The original photos seem to still be available in the myphotos directory on the computer, but without any of my lightroom editing.

Thank you so much! I was freaking out that I had lost the whole
catalog and all my collections. It would have been good if Adobe
support had been able to point me in the right direction with this
advice. They basically shrugged their shoulders and said tough
luck! I am not impressed!
Thanks again, Anne
>I D/L'd a trial version of LR 5 and lost all my catalog and
>collections in LR 4. What can I do to get them back?
>
>created by <https://forums.adobe.com/people/dj_paige>dj_paige in
>Photoshop Lightroom -
><https://forums.adobe.com/message/6778009#6778009>View the full discussion
>

What is the correct procedure to connect and collect events from IPS through SDEE

What is the correct procedure to connect and collect events from IPS through SDEE?
We are a 3rd party application, that needs to collect and analyze the IPS events for a client.
Currently the approach we are following is
1) get a SubscriptionId using the URL below
https://IP_Of_IPS/cgi-bin/sdee-server?action=open&events=evIdsAlert&force=yes
This gets us a subscriptionId which is used in step 2
2) Collect events from the url below
https://IP_Of_IPS/cgi-bin/sdee-server?confirm=yes&action=get&subscriptionId=sub-sample&startTime=1362699903575432000
a few more notes here are
- starttime is current time in nanoseconds
the peculiar problem here is that, even though we specify todays date, SDEE returns us the events from mid Feb (today is march 7)
we did try a few combinations, but are out of ideas.
any help or direction would be appreciated

This is more an application issue than an IPS issue.
Have you compared your app against other apps [IME]?

GR/GI Indivitual and Collective slip

Similar Messages

Maybe you are looking for