GR/GI using tcode mfbf

Hi
pls help
when i do GR/GI using tcode mfbf the error msg comes: CHECK table TFBEFU_CR: entry 10 does not exist.

Dear Saroji,
Please check Transaction OPK9 whether a valuation variant has been Created or not if not please create it
and also Pl refer the below Thread
[REM BACKFLUSH;
Your problem will be solved
Regards
kumar
Edited by: kumar kumar on Jul 15, 2009 2:46 PM

Similar Messages

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Any Standard FM for material stocks on posting date using Tcode MB5B

Hi,
I need   Standard FM to get material stocks on posting date using   Tcode   :   MB5B
Stock type i am using is : Storage Location/Batch Stock
the Input   i am providing is    Material, Plant , Storage Location, selection date From , selecDate To.
Then   i need to get data that it provides   header and document item level.
Can u please tel me how do i get that material stock data on posting date and in which tables
it will be populated in the database.
ITs required can u take view and post info
Thanks & Regards
sivakumar kasa
Edited by: siva kumar kasa on Dec 21, 2010 2:30 PM
Edited by: siva kumar kasa on Dec 22, 2010 7:15 AM

hi Rehan,
I have checked all settings also enhancement but there is no as such control to restrict backposting within current period
I think its self disipline action not to post backdated GI when GR is done on later date
Vishal...

Created a material and want to post by using tcode mb1c, not allowing.?

friends i have a problem here, i created a material for my sales order. i wanted to post like 100 of them in my storage location. so i used tcode mb1c, entered the storage location , plant along with the movment type 561 . it goes in and there i enter the material and and the number to be posted (number of materials) .while saving it it gives the error ."posting period 008 2007 is not open" i had earlier encounterd with error saying some previous dates were closed and i used to closed the previous periods by tcode mmpv and bring it to the present date. but this is the first time when i am seeing that the present period is closed . . i tried with omsy and mmrv also. but i dont know what to do now. how can i open current months posting. i am in sd. dont have much idea about what mm guys do. please help .

Hi Seema,
In general, after creating ES, Cstmr,Matrl we need to execute MMPV before posting material. But in your case the periods are already closed, could be bcz some FICO consultant might have worked on it. But in order to resolve your problem u give a try to following prcdr.
Go to TCode OB52 [Posting Periods] and in the EIGHT column under heading YEAR change it to 2007 for the ROW "+"[Account Type]. Then proceed to MB1C.
In addition to this U may come across No. Range issue for which U uses TCode-FBN1; here for the current Yr. [2007] U have to give the No. Range for the interval appearing in the Error, eg 49,50,51...
Still if the problem persists consult a FICO for some alterations on the same screen [TCode-OB52].
Hope it might help U and reply the same to me
Regards.

Error while restoring an Appset using TCODE:UJBR

Hi,
I am trying to restore an Appset (which I took backup)using TCODE:UJBR. But evry time it throws me an error: Error Occured while creating Application RATE via admin API.
Please suggest how to approach.
Thanks

Hi Deepti,
Thanks for your response. I'm still getting errror even if I take the appset offline.
every time I'm getting this error with different application names.
I have also checked program UJA_DATA_CHECKER to check the data structure,evrything looks good.
Please suggest where do I look..
Thanks

Error while creating form using tcode HRFORMS.

Hi All,
I am trying to create a payslip in tcode HRFORMS. while generating the program I am getting an error message stating "Generated program /1pyxxfo/znr_pay_stmt_prnt contains syntax errors".
Has anybody faced these type of error. Do I need to do any config set ups before using tcode HRFORMS? Please help me in this regard.
Thanks,
V.Nagaraju

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

While creating new stock using Tcode-MB1C

Dear sir,
I am getting an error - posting period 001 2012 is not open.
Thanks in Advance,
Sasi.
Edited by: Csaba Szommer on Jan 11, 2012 6:59 AM

hi, basic question (should check old threads before posting questions).....
check below thread
while creating stock using tcode: mb1c
yogesh

Uploading image file using tcode se78 occuring some   Error

Hai Gurus
      I am uploading image file using tcode se78 but while Uploading it giving some error i cant resolve the problem so any one help me plz
Error    "Graphic LOGO could not be saved (2LOGO)"
Regards
Selvendran

Hai
Thanks
I had done in all method but i can't save it
error is coming ..so plz help me to upload the image
Error "Graphic LOGO could not be saved (2LOGO)"
Regards
Selvendran

FI document Header text formation using tcode F110 (Automatic payment )

After completion of tcode F110 i.e. completion of a cycle of automatic payment transaction
Then we can see header text of created FI document number by using tcode fb03.
But the header text created through F110 has a concatenation of Run Date and Identification.
There is problem that how it can happen?
I have gone through all program code; there is no such direct coding for concatenation of header text, rather concatenate happens at different level of coding.
We can create FI document using FB01 also and there is choice to enter Header text manually as well as we can select it using F4 help.
Any one has any IDEA regarding this?
Thanks,
Suyog

Hi
I'm not sure it's helpful answer. The code below shows the way to change FI document header text (BKPF-BKTXT).
tables: bkdf, bkpf, bsec, bsed, bseg, bset.
constants: c_bukrs type bkpf-bukrs value '11',
            c_belnr type bkpf-belnr value '1900000001',
            c_gjahr type bkpf-gjahr value '2011'.
data: t_bkdf type standard table of bkdf with header line,
      t_bkpf type standard table of bkpf with header line,
      t_bsec type standard table of bsec with header line,
      t_bsed type standard table of bsed with header line,
      t_bseg type standard table of bseg with header line,
      t_bset type standard table of bset with header line.
start-of-selection.
* BKDF
select *
    from bkdf
    into table t_bkdf
    where bukrs eq c_bukrs and
          belnr eq c_belnr and
          gjahr eq c_gjahr.
* BKPF
select *
    from bkpf
    into table t_bkpf
    where bukrs eq c_bukrs and
          belnr eq c_belnr and
          gjahr eq c_gjahr.
loop at t_bkpf.
    concatenate t_bkpf-bktxt '-R'
    into t_bkpf-bktxt.
    modify t_bkpf.
endloop.
* BSEC
select *
    from bsec
    into table t_bsec
    where bukrs eq c_bukrs and
          belnr eq c_belnr and
          gjahr eq c_gjahr.
* BSED
select *
    from bsed
    into table t_bsed
    where bukrs eq c_bukrs and
          belnr eq c_belnr and
          gjahr eq c_gjahr.
* BSEG
select *
    from bseg
    into table t_bseg
    where bukrs eq c_bukrs and
          belnr eq c_belnr and
          gjahr eq c_gjahr.
* BSET
select *
    from bset
    into table t_bset
    where bukrs eq c_bukrs and
          belnr eq c_belnr and
          gjahr eq c_gjahr.
end-of-selection.
call function 'CHANGE_DOCUMENT'
    tables
      t_bkdf           = t_bkdf
      t_bkpf           = t_bkpf
      t_bsec           = t_bsec
      t_bsed           = t_bsed
      t_bseg           = t_bseg
      t_bset           = t_bset
*   T_BSEG_ADD       =
hope it's help.
Peerasit

Line Item : New dispaly field for Report generated using Tcode FBL1N

Hi Geeks,
I want to display further fields in the line item report generated using Tcode FBL1N . i have refered OSS note 373268 it only discuss about fields available from index table ( BSID/BSAD/BSIK/BASK/BSIS/BSAS ) and special field from tables ( BKPF, BSEG, BSEC, BSED... ) using FAKP .My requirement is to add NAME1 from LFA1. Pls suggest a solution.
Thanks,
Karthik

Hi Ushma,
Its possible.No need to cpy into Z transaction. You'll have to use a BTE for it.
Go to FIBF.
Create a 'Z' product.
Put your own. Goto settings-> P/S modules-> of a customer.
Now in the event 00001650 of z product there is a function module.
It'll be 'LINE_ITEMS_GET_GKONT'.
make a z by copying this and then put it here.
Put code in that ZLINE_ITEMS_GET_GKONT.
Also create append structure in RFPOS and RFPOSX with the fields you want.
And activate.
varun

Clear G/L Items using TCODE F-03

Hi all,
I want to clear G/L items using TCODE F-03, is there any BAPI to cater for this? I found that Program RFBIBL00 is able to do this (based on the info from SDN Forum), but I'm not too sure whether this program is working for F-03, and how to create Batch Input.
Your input is much appreciated.
Thanks and best regards,
Patrick

Just want to close this thread as F-03 is not enjoy SAP screen, hence, no BAPI available for this.
Regards,
Patrick

Urgent- error when use TCODE MIGO

Hi All,
we have got problem with TCode MIGO,
when we click save then system show message follow:
"WM movement type 101 not allowed for warehouse number TPR"
We used TCode OMJJ but can't where to assign for w/h TPR.
pls help Us
Thanks

hi,
Go to OMLJ trx..
and enter New Entry click on this button
Movement type 101 for warehouse number .
Edited by: MANI ROOPA SD/MM on Apr 24, 2008 10:04 AM

Using TCOde rscrm_bapi and a query result in a error

Hi All,
When using tcode RSCRM_BAPI the query execution results in a error Query Meta data is Incomplete
Please suggest me the solution for this ASAP.
Regards,
Varma

Hi Varma,
is the query working fine?? Otherwise use transaction RSRT2 and "generate a new report"! This should fix problems with query.
Regards,
Adem

Error message in Tcode MFBF

Hi,
i want to create an REM Backflush with Tcode MFBF but i have this error message : " Planned costing is not apdated "
Please how to resolve this ?
Regards.
Edited by: jehade el aoumari on Feb 5, 2009 9:22 AM

Dear Jehade,
1.Check whether a product cost collector exists for the material for which you want to carryout an
assembly backflush in REM.Check this in KKF6N.
2.If there's no product cost collector create one.For creating a product cost collector you require a
production version which is a combination of Rate Routing & BOM.
3.Once after these steps,goto KKF6N->change mode->click on cost calculation button and save the
data.
4.Then check in MFBF.
check and revert back.
Regards
Mangalraj.S

Can I use Tcode to start a webdynpro for abap or for JAVA?

I noticed some page program can be started by tcode for administrion. I am not sure whether it is webdynpro or BSP. But can I use tcode to start webdynpro? How to do it?

Hi Yichao,
To Create a Transaction code for a Web Dynpro application, use Transaction SE93 (Transaction Maintenance).
1.       On the dialog screen, enter the transaction code (up to 20 characters) then click on Create button.
2.       A dialog pop up screen appears, enter meaningful description of the transaction in the Short Text field.
3.       Choose the option Transaction with parameters (Parameter transaction).
4.       Choose Continue. The Create Parameter Transaction screen appears.
5.       In the Transaction field, enter WDYID and select the checkbox Skip initial screen. There is no need to make changes in the Classification group box.
6.       Add the necessary entries to the Default Values table by using the F4 help. The values are automatically available after you enter WDYID in the Transaction field.
Try going through this link for a better picture about how to achieve this.
saptechnical . com / Tutorials / WebDynproABAP / TransactionCode / Create.htm
You would have to remove the unnecessary spaces in the URL before you can see the actual working one. It wasn't allowing me to paste that link in here so had to do it this way...
Regards,
Uday

GR/GI using tcode mfbf

Similar Messages

Maybe you are looking for