GR/IR clearing amount in PO
Hi,
We have a PO,user wants to delete this PO ,GR reversal is done.But Account maitenance is showing 83000 INR in GR/IR clearing value . in local currency.And user is not able to delete the PO because of this.Is there anyway to close this PO.
can we do MR11 transaction reverse.
rgrds....
Hi,
Check any invoice is posted for Delivery costs and custom duties.
Reverse them also if posted.
Umakanth R
Similar Messages
-
Down payment is not cleared with clearing amount?
Hi,
When I print the invoice after receiving down payment through F-29 and then clear this amount through F-39, and when I print the invoice for the same customer the Received amount for example $20 and cleared amount of $20 are printed as $40.
If some one help me to understand why this is happening ,and which field should show $0(or what ever the balance is), once the amount is cleared.
How to rectify this error in the invoice?
I appreciate your feed back.
wbr,
SunilHi Milind, The print is z development.The example is as follows,when we printed the Invoice for the customer,
Amount of invoice against the new sales order...$100
Down payment received ...$40
Balance .........................($60).
But earlier on we received down payment of $20, which was cleared by equal amount of $20.The amount of down payment should be now $0.
This is the issue, and then the Z report picks up this $20 amount which was received as down payment.Is there way we should pick up$0 in this field.Second question, where to pick this $0 and how to pick(any changes in the coding we have to make) for this $0 amount.
I hope this explanation is enough.Please let me know if you like to have more details.
Thanks.
wbr,
Sunil -
Clearing amount is more than tax base in Invoice
Hi Friends,
I am facing one issue at the time of Clearing through t.code F-54. I have made payment 10000/- and deduct TDS 1% on Base amount 5000/-. We have booked vendor invoice with same amount 10000/- and deduct TDS 1% on base amount 50000/-. Now we are doing clearing F-54 and simulate the document then it is showing error message " Clearing Amount is more than tax base in Invoice" Message no Message no. 8I000.
Please give your valuable suggestion on it.
Thanks & Regards,
PankajHi Pankaj,
There is problem while clearing throgh F-54 is just because of imbalce between the Down payment and the invoice amount.
In down Payment for deduction of tds calculation base is 5,000 and in invoice the calculation base is 50,000.
F-54 is to clear the vendor invoice with same amount.
Please check .
Hope this will help you,
Thanks,
Deepa -
Reversing CENVAT Clearing amount in MRKO
Hi,
For a consignment material, Settlement has been done through MRKO. But due to some problem we need to Cancel the Settlement to vendor, for that i cancelled the Material document and then again executed the transaction MRKO. FI reversal has taken for the Net amount (Material cost) and not for the CENVAT Clearing amount, So the CENVAT Clearing amount still we need to reverse. Please help how can we do this.Hi,
I mentioned in the message the posted documents for GRN and Excise.
Regards,
Deepa -
Clearing amount calculation in Credit management
Hi All,
Can anyone tell me if Customer Invoices and Customer Credit Notes ( DR and DG ) should be included in the calculation of the Clearing amount ( total cleared ) on the credit management screens ? And what is the reasoning ..
Cheers
JonHi,
It will considered only customer invoice only not the credit notes why because credit amount to given to that customer some purpose (retirement goods .....)
Regards,
venkataswamy.y
Edited by: yanamadala venkataswamy on Sep 25, 2009 9:51 AM -
From which table ,i ll get both the invoice and cleared amount ???
Hi Friends,
i am making a report for my sales client where finance part is also required.
the requirement is : the sales people want know the status of the invoice generated at their end.the report shud be like if they enter the invoice no,fiscal year and coustomer they will be able to see the status of the invoice.how much pmt has received for that particular invoice,wheather it is open or fully cleared?
From which table i can get both invoice no. and the payment/pmts rerceived against that invoce/invoices.
plz guide.
Regards,
BiswaHi,
SAP Standard Report itself covers all the requirements mentioned. With FBL5N, we get to know how much has been invoiced, paid and cleared and how much advance has been paid by customer etc., in one screen. Apart from this we have also all signs which show, which all invoices are due, overdue and its easy to analyse as well.
Was this requirement given by client after seeing this standard report?
Hope this info is helpful.
Regards,
Venkat -
Tables for Partially Cleared Amounts for Customer
hi all,
I need to calculate Partial Amounts for particular Customer .
Can anybody tell the tables for Calculating Partial Amounts.
Thanx & Regards
RamiHi,
As per your question, we assume that you want the amount where in we received partial payments from / to customer (incoming payment / debit note ). Table relevant for this will be BSAD --> which will contain all payments (partial / full).
Hope it helps.
Thanx,
Daya -
GL posting clearing item amount and do not show doc status on the header
Hello,
GL post clearing amount both side and increase the no of items in the GL balance display. Inaddition, these clearing line item document header does not show document status field. I have another GL which does not post extra two lines and clearing item document is empty and header shows document status as A (cleared item).
Could you let me know what the difference and what need to be changed to make it not to post clearing items + and - and show doc status.
Both are same FSG and only difference tick mark not done for balance in local currency.Thanks for your reply...but thats did not work. As I said earlier, I have a Structure in my rows and 2 characteristics in my free chracteristics and in my columns I have a selection of key figures...
What I want is when I drill down on one of my 2 free characteristics, I do not want to see rows with amounts (KFs) zero or space.
RR -
Custom purchase requsitionto vendor open and cleared payment report
dear all i develop report but i cant ableto show in that open amount and cleared amount of vender in that report so please see this report and feedback me for logic to show open and clear amount of vendor purchase orderwise or vendorwise
report zpo_purchase_history no standard page heading message-id 00.
TABLES : bsik, bsak, lfa1, lfb1, skb1, t001, bapifvdexp_vzzbepp.
type-pools:slis,ICON.
types :begin of ty_po,
banfn type eban-banfn,
"Purchase Requisition Number
bnfpo type eban-bnfpo,
"Item Number of Purchase Requisition
ekgrp type eban-ekgrp, "Purchasing Group
badat type eban-badat,
"Requisition (Request) Date
menge type eban-menge,
KNTTP TYPE EBAN-KNTTP,
PSTYP type eban-PSTYP,
"Purchase Requisition Quantity
meins type eban-meins,
"Purchase Requisition Unit of Measure
lifnr type ekko-lifnr, "Vendor Account Number
bedat type ekko-bedat, "Purchasing Document Date
ebeln type ekpo-ebeln,
"Purchasing Document Number
ebelp type ekpo-ebelp,
"Item Number of Purchasing Document
matkl type ekpo-matkl, "Material Group
mtart type ekpo-mtart, "Material Type
matnr type ekpo-matnr, "Material Number
txz01 type ekpo-txz01, "Short Text
menge1 type ekpo-menge, "Purchase Order Quantity
meins1 type ekpo-meins,
"Purchase Order Unit of Measure
balqty type ekpo-menge, "Balance Quantity
netpr type ekpo-netpr,
"Net Price in Purchasing Document
peinh type ekpo-peinh, "Price Unit
mblnr type mseg-mblnr,
"Number of Material Document
zeile type mseg-zeile, "Item in Material Document
menge2 type mseg-menge, "GR Quantity
meins2 type mseg-meins, "GR Unit of Measure
werks type mseg-werks, "Plant
charg type mseg-charg, "Batch
belnr type rbkp-belnr,
"Document Number of an Invoice Document
bldat type ekbe-bldat, "Document Date in Document
belnr_b type rbkp-belnr,
SHKZG type ekbe-SHKZG , "Debit/Credit Indicator
DMBTR type bsik-dmbtr, "Amount in Local Currency
DMBTR_C type bsAk-dmbtr, "Amount in Local Currency
thick(10) type c, "Thickness
width(10) type c, "Width
length(10) type c, "Length
grade(10) type c, "Grade
BELNR_d type bseg-belnr,
xblnr type bkpf-xblnr,
awkey type bkpf-awkey,
RMWWR type rbkp-RMWWR,
WMWST1 type rbkp-WMWST1,
end of ty_po.
types :begin of ty_ekko,
ebeln type ekko-ebeln,
lifnr type ekko-lifnr,
bedat type ekko-bedat,
end of ty_ekko.
types:begin of ty_ekpo,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
matnr type ekpo-matnr,
txz01 type ekpo-txz01,
menge type ekpo-menge,
meins type ekpo-meins,
netpr type ekpo-netpr,
peinh type ekpo-peinh,
banfn type ekpo-banfn,
bnfpo type ekpo-bnfpo,
mtart type ekpo-mtart,
end of ty_ekpo.
types :begin of ty_eban,
banfn type eban-banfn,
bnfpo type eban-bnfpo,
matnr type eban-matnr,
menge type eban-menge,
meins type eban-meins,
end of ty_eban.
types : begin of ty_ekbe,
ebeln type ekbe-ebeln,
ebelp type ekbe-ebelp,
belnr type ekbe-belnr,
bldat type ekbe-bldat,
gjahr type ekbe-gjahr,
buzei type ekbe-buzei,
matnr type ekbe-matnr,
DMBTR type ekbe-dmbtr,
shkzg type ekbe-shkzg,
end of ty_ekbe.
types : begin of ty_mseg,
mblnr type mseg-mblnr,
mjahr type mseg-mjahr,
zeile type mseg-zeile,
menge type mseg-menge,
meins type mseg-meins,
ebeln type mseg-ebeln,
ebelp type mseg-ebelp,
matnr type mseg-matnr,
werks type mseg-werks,
charg type mseg-charg,
end of ty_mseg.
types : begin of ty_rbkp,
belnr type rbkp-belnr,
gjahr type rbkp-gjahr,
bldat type rbkp-bldat,
lifnr type rbkp-lifnr,
ZUONR type rbkp-ZUONR,
RMWWR type rbkp-RMWWR,
WMWST1 type rbkp-WMWST1,
end of ty_rbkp.
types : begin of ty_bseg,
bukrs type bseg-bukrs,
belnr type bseg-belnr,
gjahr type bseg-gjahr,
buzei type bseg-buzei,
valut type bseg-valut,
wrbtr type bseg-wrbtr ,
augbl type bseg-augbl,
matnr type bseg-matnr,
lifnr type bseg-lifnr,
ebeln type bseg-ebeln,
end of ty_bseg.
types : begin of ty_rseg,
belnr type rseg-belnr,
gjahr type rseg-gjahr,
ebeln type rseg-ebeln,
ebelp type rseg-ebelp,
matnr type rseg-matnr,
bukrs type rseg-bukrs,
end of ty_rseg.
types : begin of ty_bsik,
belnr type bsik-belnr,
buzei type bsik-buzei,
DMBTR type bsik-DMBTR,
budat type bsik-budat,
shkzg type bsik-shkzg,
ebeln type bsik-ebeln,
lifnr type bsik-lifnr,
end of ty_bsik.
types : begin of ty_bsak,
belnr type bsak-belnr,
lifnr type bsak-lifnr,
ebeln type bsak-ebeln,
DMBTR_C type bsak-DMBTR,
ZUONR type bsak-ZUONR,
end of ty_bsak.
types: begin of ty_bkpf,
BELNR type bkpf-belnr,
xblnr type bkpf-xblnr,
awkey type bkpf-awkey,
end of ty_bkpf.
data: it_po type standard table of ty_po,
it_ekko type standard table of ty_ekko,
it_ekpo type standard table of ty_ekpo,
it_eban type standard table of ty_eban,
it_ekbe type standard table of ty_ekbe,
it_mseg type standard table of ty_mseg,
it_rbkp type standard table of ty_rbkp,
it_rseg type standard table of ty_rseg,
it_bseg type standard table of ty_bseg,
it_bsik type STANDARD TABLE OF ty_bsik with header line,
it_bsak type STANDARD TABLE OF ty_bsak,
it_bkpf type standard table of ty_bkpf,
wa_po type ty_po,
wa_ekko type ty_ekko,
wa_ekpo type ty_ekpo,
wa_eban type ty_eban,
wa_mseg type ty_mseg,
wa_rbkp type ty_rbkp,
wa_rseg type ty_rseg,
wa_bseg type ty_bseg,
wa_ekbe type ty_ekbe,
wa_bsik type ty_bsik,
wa_bsak type ty_bsak,
wa_bkpf type ty_bkpf.
data: it_fcat type slis_t_fieldcat_alv,
it_lshead type slis_t_listheader,
it_sort type slis_t_sortinfo_alv,
wa_fcat type slis_fieldcat_alv,
wa_lshead type slis_listheader,
wa_layout type slis_layout_alv,
wa_sort type slis_sortinfo_alv.
data :it_cl_data like table of clobjdat,
wa_cl_data like clobjdat.
data: values(10) type n.
data: value1(4) type N.
data: c_matkl type ekpo-matkl,
c_matnr type ekpo-matnr,
c_ekgrp type eban-ekgrp,
c_badat type eban-badat,
c_index type sy-tabix,
c_grmenge type mseg-erfmg,
c_low(10) type c,
c_high(10) type c,
c_date type string,
c_bukrs type ekko-bukrs,
c_WERKS type eban-WERKS.
data: gd_date(10).
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
*********Selection screen variables*********
selection-screen:begin of block b1 with frame title text-001.
select-options: s_bukrs for c_bukrs DEFAULT 'bmp1',
s_WERKS for c_WERKS,
s_matnr for c_matnr DEFAULT 'rm-01',
s_matkl for c_matkl ,
s_badat for c_badat ,"obligatory,
s_ekgrp for c_ekgrp.
parameters: ch_bal as checkbox.
selection-screen:end of block b1.
*initialization.
* PERFORM EVENT_CALL.
* PERFORM POPULATE_EVENT.
start-of-selection.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
perform getdata.
perform setdata.
perform fieldcat.
perform display.
*& Form GETDATA
form getdata .
select a~BANFN
a~bnfpo
a~ekgrp
a~badat
a~KNTTP
a~PSTYP
b~ebeln
b~ebelp
b~matkl
b~matnr
b~bukrs
into corresponding fields of table it_po
from eban as a inner join ekpo as b
on a~banfn = b~banfn and
a~bnfpo = b~bnfpo AND
A~KNTTP = B~KNTTP and
a~PSTYP = b~PSTYP
where a~badat in s_badat and
a~ekgrp in s_ekgrp and
a~WERKS in s_WERKS and
b~matnr in s_matnr and
b~matkl in s_matkl and
b~bukrs in s_bukrs and
b~loekz <> 'L' and
a~loekz <> 'X'.
if it_po[] is not initial.
select ebeln
ebelp
matnr
txz01
menge
meins
netpr
peinh
banfn
bnfpo
mtart
from ekpo into table it_ekpo
for all entries in it_po
where ebeln = it_po-ebeln and
ebelp = it_po-ebelp and
loekz <> 'L'.
select banfn
bnfpo
matnr
menge
meins
from eban into table it_eban
for all entries in it_po
where banfn = it_po-banfn and
bnfpo = it_po-bnfpo and
loekz <> 'X'.
if it_ekpo[] is not initial.
select ebeln
lifnr
bedat
from ekko into table it_ekko
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln.
select ebeln
ebelp
belnr
bldat
gjahr
buzei
matnr
DMBTR
shkzg
from ekbe into table it_ekbe
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln and
ebelp = it_ekpo-ebelp .
*if it_ekbe-shkzg = 'H'.
**ekbe-dmbtr = ekbe-dmbtr * -1.
**ekbe-menge = ekbe-menge * -1.
*endif.
* select belnr
* gjahr
* ebeln
* ebelp
* from bseg into table it_bseg
* for all entries in it_ekpo
* where ebeln = it_ekpo-ebeln and
* ebelp = it_ekpo-ebelp.
select belnr
gjahr
ebeln
ebelp
matnr
bukrs
from rseg into table it_rseg
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln and
ebelp = it_ekpo-ebelp.
endif.
if it_ekbe[] is not initial.
select mblnr
mjahr
zeile
menge
meins
ebeln
ebelp
matnr
werks
charg
from mseg into table it_mseg
for all entries in it_ekbe
where mblnr = it_ekbe-belnr and
mjahr = it_ekbe-gjahr and
zeile = it_ekbe-buzei and
bwart = '101'.
endif.
if it_rseg[] is not initial.
select belnr
gjahr
bldat
lifnr
ZUONR
RMWWR
WMWST1
from rbkp into table it_rbkp
for all entries in it_rseg
where belnr = it_rseg-belnr.
endif.
*if it_rseg[] is not initial.
* SELECT bukrs
* belnr
* gjahr
* buzei
* valut
* wrbtr
* augbl
* matnr
* lifnr
* ebeln
* INTO TABLE it_bseg
* FROM bseg
* FOR ALL ENTRIES IN it_rseg
* WHERE bukrs = it_rseg-bukrs and ebeln = it_rseg-ebeln and mwskz = ''.
*endif.
*loop at it_BKPF into wa_BKPF.
* values = wa_rbkp-belnr.
* value1 = wa_rbkp-gjahr.
data: aekey_1 type string .
*CONCATENATE values value1 into aekey_1.
* if it_BSEG[] is not initial.
*MESSAGE aekey_1 type 'I'.
SELECT single belnr xblnr awkey into wa_bkpf
from bkpf
where awkey = aekey_1.
SELECT SINGLe belnr
buzei
dmbtr
budat
shkzg
ebeln
lifnr
FROM bsik
INTO CORRESPONDING FIELDS OF wa_bsik
*FOR ALL ENTRIES IN it_bseg
WHERE
bukrs in s_bukrs and
lifnr = wa_rbkp-lifnr
and
*AND gjahr = it_bseg-gjahr
* AND
belnr = wa_bkpf-belnr.
insert wa_bsik into table it_bsik.
CLEAR wa_bsik.
CLEAR it_bsik.
*endloop.
* and ebeln = it_bseg-ebeln .
* select BELNR
** SHKZG
** DMBTR
* from bkpf into table it_bkpf
* for ALL ENTRIES IN it_rbkp
* where belnr = it_rbkp-belnr.
* ENDif.
IF IT_bseg[] IS NOT INITIAL.
select belnr
LIFNR
ebeln
DMBTR
ZUONR
from bsik into table it_bsik
for all entries in it_bseg
where belnr = it_bseg-belnr.
select belnr
LIFNR
ebeln
DMBTR
ZUONR
from bsak into table it_bsak
for all entries in it_bseg
where belnr = it_bseg-belnr.
ENDIF.
else.
message s002.
leave list-processing.
endif.
endform. " GETDATA
*& Form SETDATA
form setdata .
clear wa_po.
loop at it_po into wa_po.
c_index = sy-tabix.
********Calculate PR Quantity**********
clear wa_eban.
read table it_eban into wa_eban
with key banfn = wa_po-banfn
bnfpo = wa_po-bnfpo.
if sy-subrc eq 0.
move:wa_eban-menge to wa_po-menge,
wa_eban-meins to wa_po-meins.
endif.
********Calculate PO Quantity**********
clear wa_ekpo.
read table it_ekpo into wa_ekpo
with key banfn = wa_po-banfn
bnfpo = wa_po-bnfpo .
if sy-subrc eq 0.
move:wa_ekpo-txz01 to wa_po-txz01,
wa_ekpo-netpr to wa_po-netpr,
wa_ekpo-peinh to wa_po-peinh,
wa_ekpo-mtart to wa_po-mtart,
wa_ekpo-menge to wa_po-menge1,
wa_ekpo-meins to wa_po-meins1.
endif.
********Calculate Balance Quantity******
clear wa_mseg.
loop at it_mseg into wa_mseg
where ebeln = wa_po-ebeln and
ebelp = wa_po-ebelp.
c_grmenge = c_grmenge + wa_mseg-menge.
endloop.
move:wa_mseg-mblnr to wa_po-mblnr,
c_grmenge to wa_po-menge2,
wa_mseg-meins to wa_po-meins2,
wa_mseg-werks to wa_po-werks,
wa_mseg-charg to wa_po-charg.
wa_po-balqty = wa_eban-menge - c_grmenge.
clear : wa_rseg,wa_rbkp.
read table it_rseg into wa_rseg with key
ebeln = wa_mseg-ebeln
ebelp = wa_mseg-ebelp.
read table it_rbkp into wa_rbkp
with key belnr = wa_rseg-belnr
gjahr = wa_rseg-gjahr.
if sy-subrc eq 0.
move : wa_rbkp-belnr to wa_po-belnr,
wa_rbkp-bldat to wa_po-bldat,
wa_rbkp-RMWWR to wa_po-RMWWR,
WA_RBKP-WMWST1 TO WA_PO-WMWST1.
endif.
read table it_bseg into wa_bseg with key
ebeln = wa_rseg-ebeln
bukrs = wa_rseg-bukrs.
if sy-subrc eq 0.
move wa_bseg-belnr to wa_po-belnr_d.
endif.
* read table it_bkpf into wa_bkpf
* with key belnr = wa_ekbe-belnr.
* read table it_bseg into wa_bseg
* with key belnr = wa_bkpf-belnr.
CLEAR wa_bsik.
clear it_bsik.
read table it_bsik into wa_bsik
with key belnr = wa_bkpf-belnr.
* if wa_bsik-shkzg = 'H'.
* wa_bsik-DMBTR = wa_bsik-DMBTR * 1.
* endif.
if sy-subrc eq 0.
move : wa_bsik-belnr to wa_po-belnr,
wa_bsik-DMBTR to wa_po-DMBTR.
endif.
* clear wa_bsik.
* read table it_bsik into wa_bsik
* with key belnr = wa_bseg-belnr.
* if sy-subrc eq 0.
* move : wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
*clear wa_bsak.
* read table it_bsak into wa_bsak
* with key belnr = wa_bseg-belnr.
* if sy-subrc eq 0.
* move : wa_bsak-DMBTR_C to wa_po-DMBTR_C.
* endif.
*clear : wa_rbkp.
*loop at it_bsik into wa_bsik.
*read table it_bsik into wa_bsik with key belnr = wa_rbkp-belnr.
*if sy-subrc eq 0.
* move : wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
*endloop.
*********Assign Vendor,PO Date*********
clear wa_ekko.
read table it_ekko into wa_ekko
with key ebeln = wa_po-ebeln.
if sy-subrc eq 0.
move:wa_ekko-lifnr to wa_po-lifnr,
wa_ekko-bedat to wa_po-bedat.
endif.
*clear wa_ekko.
*read table it_ekko into wa_ekko
*with key lifnr = wa_po-lifnr.
*if sy-subrc eq 0.
* move: wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
* call function 'ZSD_BATCH_CLASSIFICATION_DATA'
* exporting
** ch_charg = wa_po-charg
* ch_matnr = wa_po-matnr
* ch_werks = wa_po-werks
* tables
* cl_data = it_cl_data
** I_SEL_CHARACTERISTIC =
loop at it_cl_data into wa_cl_data.
if wa_cl_data-ausp1 ne '?'.
if wa_cl_data-atnam eq 'THICKNESS'.
move wa_cl_data-ausp1 to wa_po-thick.
elseif wa_cl_data-atnam eq 'LENGTH'.
move wa_cl_data-ausp1 to wa_po-length.
elseif wa_cl_data-atnam eq 'WIDTH'.
move wa_cl_data-ausp1 to wa_po-width.
elseif wa_cl_data-atnam eq 'GRADE'.
move wa_cl_data-ausp1 to wa_po-grade.
endif.
endif.
endloop.
modify it_po from wa_po index c_index.
clear :c_grmenge,wa_po,wa_ekpo,wa_mseg,c_index.
endloop.
endform. " SETDATA
*& Form FIELDCAT
* text
* --> p1 text
* <-- p2 text
form fieldcat .
perform buildfields using '1' 'BANFN' 'IT_PO' 'PR Number' '' ''.
* perform buildfields using '2' 'BNFPO' 'IT_PO' 'PR Item Number' '' ''.
perform buildfields using '2' 'KNTTP' 'IT_PO' 'A/c Assignment Cat' '' ''.
perform buildfields using '2' 'PSTYP' 'IT_PO' 'Item Cat' '' ''.
perform buildfields using '3' 'EKGRP' 'IT_PO' 'Purchase Group' '' ''.
perform buildfields using '4' 'BADAT' 'IT_PO' 'Request Date' '' ''.
perform buildfields using '5' 'MENGE' 'IT_PO' 'PR Quantity' 'X' ''.
perform buildfields using '6' 'MEINS' 'IT_PO' 'PR Unit' '' ''.
perform buildfields using '7' 'LIFNR' 'IT_PO' 'Vendor Number' '' ''.
perform buildfields using '8' 'EBELN' 'IT_PO' 'Purchasing Doc No' '' '' .
perform buildfields using '9' 'BEDAT' 'IT_PO' 'PO Date' '' ''.
perform buildfields using '10' 'MTART' 'IT_PO' 'Material Type' '' ''.
perform buildfields using '11' 'MATKL' 'IT_PO' 'Material Group' '' ''.
perform buildfields using '12' 'MATNR' 'IT_PO' 'Material Number' '' ''.
perform buildfields using '13' 'TXZ01' 'IT_PO' 'Material Desc' '' ''.
perform buildfields using '18' 'MENGE1' 'IT_PO' 'PO Quantity' 'X' ''.
perform buildfields using '19' 'MEINS' 'IT_PO' 'PO Unit' '' ''.
perform buildfields using '20' 'NETPR' 'IT_PO' 'Net Price' '' ''.
perform buildfields using '21' 'PEINH' 'IT_PO' 'Price Unit' '' ''.
perform buildfields using '22' 'MBLNR' 'IT_PO' 'GR Number' '' ''.
perform buildfields using '23' 'MENGE2' 'IT_PO' 'GR Quantity' 'X' ''.
perform buildfields using '24' 'MEINS2' 'IT_PO' 'GR Unit' '' ''.
perform buildfields using '25' 'BELNR' 'IT_PO' 'Invoice doc. number' '' ''.
perform buildfields using '26' 'BLDAT' 'IT_PO' 'Invoice Date' '' ''.
* perform buildfields using '26' 'BELNR_D' 'IT_POP' 'A/C Doc. No.' '' ''.
* perform buildfields using '26' 'AUGBL' 'IT_PO' 'Clearing Doc No.' '' ''.
perform buildfields using '26' 'DMBTR' 'IT_PO' 'OPEN AMOUNT' '' ''.
perform buildfields using '26' 'DMBTR' 'IT_PO' 'clear AMOUNT' '' ''.
* perform buildfields using '26' 'DMBTR_C' 'IT_PO' 'Clear balance' '' ''.
if ch_bal = 'X'.
perform buildfields using '27' 'BALQTY' 'IT_PO' 'Balance Quantity'
'X' ''.
endif.
perform buildfields using '26' 'WMWST1' 'IT_PO' 'TOTAL TAX ADDED' 'X' ''.
perform buildfields using '26' 'RMWWR' 'IT_PO' 'TOTAL AMOUNT IN INVOICE' 'X' ''.
endform. " FIELDCAT
*& Form BUILDFIELDS
* text
* -->P_0449 text
* -->P_0450 text
* -->P_0451 text
* -->P_0452 text
form buildfields using value(p_col_pos) like sy-cucol
value(p_fldname) type slis_fieldname
value(p_tabname) type slis_tabname
value(p_reptext) like dd03p-reptext
value(p_do_sum) type char1
value(hotspot) type char1.
wa_fcat-col_pos = p_col_pos.
wa_fcat-fieldname = p_fldname.
wa_fcat-tabname = p_tabname.
wa_fcat-reptext_ddic = p_reptext.
wa_fcat-do_sum = p_do_sum.
wa_fcat-hotspot = hotspot.
append wa_fcat to it_fcat.
clear wa_fcat.
endform. " BUILDFIELDS
*& Form DISPLAY
form display .
clear wa_layout.
wa_layout-zebra = 'X'.
wa_layout-colwidth_optimize = 'X'.
* wa_layout-box_fieldname = 'SEL'.
* wa_layout-edit = 'X'.
perform build_sort using 'BANFN' '1' 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = sy-cprog
* I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND '
i_callback_top_of_page = 'TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
i_background_id = 'ALV_BACKGROUND'
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_fcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
I_SAVE = 'A'
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_po[]
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " DISPLAY
*& Form top_of_page
* text
form top_of_page. "#EC *
**********Create report header*********
refresh it_lshead.
clear wa_lshead.
**********To display date in header*********
* write: s_badat-low to c_low dd/mm/yyyy,s_badat-high to c_high
* dd/mm/yyyy.
* if s_badat-high is initial.
* concatenate 'Dated on' c_low into c_date separated by space.
* else.
* concatenate 'Dated between' c_low 'and' c_high into c_date separated
* by space.
* endif.
wa_lshead-typ = 'H'.
wa_lshead-info = 'PR To Payment History'.
* 'Pending Indents History -We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
Hope that makes sense. Let me know if you want clarification.
/smw -
Open items clearing urgent plz
Hi Friends,
Ihave one problem we have to clear vendor payments on 31.03.2008 but unfortunatuly it was done on 02.04.2008 then we realize and river it in FBRA after that we are clearing on 31.03.2008 but there is problem the clearing amount is showed in open items and cleared items also before 01.04.2008 the clearing amounrt is not decreased to the total amount
tell me the solution how we slow this problem
how it decrease form the total amou of open items
Thanks
Jyotsna
Edited by: jyotsna devi on Apr 5, 2008 7:59 AMHi,
In FBRA there are two options 1. reset and 2. reset and reverse. You must have chosen first option so the documents had been reseted but not reversed. Please reverse the clearing document. after reversing you will get open items back to original value.
try it.
Regards,
Kedar -
Dear Gurus,
Please clear my doubt i am new isu environment.when i am going to reset cleared items i am confusing below options .
I hve to amounts in one Doucment No.,now i want to reset only one partical payment from same documents no.
Tab: Setting for scope of resetting
1.Not yet sepcified
2.Hole clearing
3.parts of clearing
Tab:Setting for posting clearing Amount:
1.Not yet specified
2.create a new open item
3.Retain distribution to accounts
4.Clearing amount to clarification account
abash
FICAHi Abash
Select the option "parts of clearing" and "retain distribution to accounts". Click on Save and then you will be given the option for which part of the document you want to perform reset-clear. Select that line item and then save.
thanks
Debashish -
AP-Credit Memo-Clear Vendor/Credit Memo
Hi all, I am facing Problem during Vendor Credit memo, Clear it (F-44), and Manual Check using F-58
Can I have different Due date For Vendor Credit memo , as I can see we have different Payment terms in Master data but whenever I post it gives the Due date as Immediate but if I see Open item report it says not Due and shows the Payment terms and the net due dates. Is this Normal?
I would like to clear the credit memo using the F-44 with reference to another open line item but system says Difference is too large for clearing.
The third thing I am trying to issue manual check I gave details, as per "J03_AP_CreditMemo_BPP_EN_US", when I hit Process open Items "system is not allowing to post document getting error "Select a valid function"".
Any Ideas How to deal with the above 3 situations?
Sandhya.Hi,
To answer few queries,
Data can be entered in the field for the terms of payment key in various ways as you enter a business transaction:
In most business transactions, the system defaults the key specified in the master record of the customer/vendor in question.
In some transactions (for example, credit memos), however, the system does not default the key from the master record. Despite this, you can use the key from the customer/vendor master record by entering "*" in the field.
Regardless of whether or not a key is defaulted from the master record, you can manually enter a key during document entry at:
item level in sales orders header level in purchase orders and invoices
F-44--clearing problem
If the amount of open item is not equal to clearing amount you enter and the difference is not with in the tolerance limit you specify in the configuration, you will face this error. If the whole amount of open item need not be cleared, then try partial payment/residual payment options.
The third situation I am not clear.
Thanks
Aravind -
Dear Experts,
I want to develop a custom FM for clearing (with the interface of FKK_SAMPLE_TFK115). Basically I want to assign clearing amount available to different items in table T_FKKCL_E115.
What should I do to define a fixed amount to some line item in table fkkcl
Say I have 2 open items in account
Amount Main Transaction Sub transaction
100 6000 0010
200 6000 0020
Say consumer makes a payment of 100 and I want it to clear the amounts above by 50(i.e equally between open items) then as per the documentation of the FM FKK_SAMPLE_TFK115 i should do this
Loop at t_fkkcl_e115 where betrw > 0
E_AUGBW_E115 = u201850u2019
E_XAKTP_E115 = u2018Xu2019
Endloop
But this code is not working. The system posts a credit open.
What could be the reason?Also, when I set an external debugger on the custom FM for clearing and put this custom FM in step 2 of my variant, the system doesnu2019t seem to execute the custom FM when I make the payment. However, if I put the FM in step 1 it does execute the FM.
I also tried another scenario. I made a payment in such a way that a credit open was posted. Then I ran account maintenance(behind which I had put the same clearing variant as the one mentioned above). Even if the FM has been put in step 1, the system doesnu2019t execute the FM!
Its strange but for some reasons this is how the system is behaving. If there is any confusion and you guys are not clear about whats happening then please do tell. I would elaborate the issue.
And guys please try to answer the first post. Would really appreciate.
Thanks in advance! -
hi,
may i know where can see customer account is open item managed.
the recon account for customer is not open item managed.
in fb05 i do doc type DZ for transaction incoming payment.
in first line item i put pk40 for bank clearing and open item selection i put customer account.
then i match and clear 1 of the item in the customer item line.
in fbl5n, i can see 2 same clearing doc.
in fb03, i can see pk40 for bank clearing and pk15 for cust.
my question :
1) besides clearing account, customer and vendor also open item managed? where i can see these 2 subledger account with open item managed being ticked just like clearing account do?
2) in fb05, if want to do post and clear for clearing/cust/vdr account, this account must define in open item selection screen and CANNOT define in first line item, right?
3) if define clearing/cust/vdr account in first line item in fb05 then this account will not be cleared. the system actually use the amount entered for first line item to match and clear amount for account defined in open item selection screen. correct?
4) in fb05, i purposely put outgoing payment for the same entry above and instead of pk15, in fb03, it shows pk18 payment clearing. what is payment clearing?
thanksHi Eliana,
1. The reconcilliation acounts ( FS00 in control tab Account control fild : A, D, V) are automaticaly designed for open item managed accounts. for those type of reconcilliation acounts , need not to be ticked for open item managend account
2. No , you can put in the first line item also.. but you will not be able to clear any item for those accounts
3. Absolutely correct.
4. As you put outgoing payment syatem has taken its defalut nomeneclature for that...
Hope it is clear...
If helpful asign points
Cheers
PK
Message was edited by:
Prabhat Kumar -
Resetting of partial cleared accounting document
Dear Experts:
I have two invoices from customer. Invoice A is of amount 100 and invoice B is of amount 75. I wanted to clear amount 50 from invoice A. But mistakenly i cleared invoice B. How can i reset the wrong document without reversing it? I am not able to rest, because no clearing document has been generated as it was cleared partially.
Looking forward for early response.
Regards,
FarahnazHi,
If you want to reset the document without reverse the document. you just go to transaction code FBRA. and you choose the menu for reset only.
Hope this will help you.
Regards,
Lenny
Maybe you are looking for
-
I have a customer that has several BP's with a cutoff of the 20th. So for example Invoice Due Oct 15 Oct 30 Oct 22 Nov 30 Nov 12 Nov 30 Nov 21 Dec 30 Any ideas, Karl
-
There are a sample for loop data out using xpath-querie?
hello, i have a web service that contains multiple rows. i transfered these data in a variable tInput. Now i want to transfer these data in a output variable. Is There a sample or tutorial, that shows how to loop data out of a variable (array) in a s
-
RoboHelp 7 compatibility with IE9
Is RoboHelp 7 compatible with IE9?
-
Business Package 'open in separate headerless portal window' shows masthead
We have implemented ESS and MSS 1.41 and SRM 7.0 in our development portal. When an iView with the property 'open in a separate headerless portal window' is opened, it opens in a separate window but with the masthead and TLN bar. I have checked the i
-
hi, i am doing recon from csv file using GTC and i had two types of user like human and non human in the csv file feed. while recon that feed i have to filter all the non human resource and i have to recon only human users. please any one help me out