GR/IR Clearing F.13 is not working

Hi,
We are doing F.13 for GR/IR clearing. Itu2019s not working in production but it is working in TEST mode with the same parameters. We have checked the configuration in SPRO and we have given three criterion
1. ZUONR (Assignment)
2 EBELN (Purchasing Document)
3. EBELP (Item)
Kindly advise how we can resolve this problem
Regards,
Abhinav Sharma

HI,
IN the test run mode, please deselect the option "Document that can not be cleared" in the bottom part of F.13
Then see whether on execution any doument got displayed for clearing. If yes, then come back by pressing F3 button an then remove the test run tick and again execute.
It should clear those documents. If not, then go to transaction SU53 and check whether it is an authorization issue.
Regards,
Gaurav

Similar Messages

My 'clear history button is not working. When I click on it it doesn't do anything and the letter are gray instead if blue like usual. I've gone to every type of settings I can bit I don't know how to fix it. Please help .

My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .

T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Alt shift clear paragraph overrides does not work

ID CS3 Win
This is one of those little things that is becoming very frustrating-- crtl +shift+ click on paragraph style does not work all the time. It worked for me last week, but is not working today-- or it actually does work after click about 3 times , clicking another style and clicking back on the correct style. Anyone experiencing this/know a fix or what I may be doing wrong? I am doing as it says, holding those keys down and clicking the style.

>crtl +shift+ click on paragraph style does not work all the time
It shouldn't work at all. Those modifiers are for the clear overrides button at the bottom of the styles palette. Alt-click on the style name to clear all overrides. I believe this is different behaviour from CS2 (or am I thinking of CS) where alt-click cleared character overrides and alt-shft-click cleared everything.

Clear download list button not working

The "clear download" button isn't working
It doesn't clear my list of downloads; I've tried right-clicking and "clear download" but it doesn't work either

Please first make sure your extensions are up to date, as well as make sure that the preference is not locked. [[Remove recent browsing, search and download history]]
You can also try this add ons: [https://addons.mozilla.org/en-US/firefox/search/?q=clear+download+history&platform=all&appver=29.0]
And please try Safe Mode[[Troubleshoot Firefox issues using Safe Mode]]

G4-450 DP with a 22 inch clear Cinema display will not work, please advise

Hello all
I can not seem to get a G4-450 DP to work with a 22 inch clear Cinema display, i even have one of those dr.botts wich i normaly run a 2nd 15" clear display.
What happens is that it starts up and then goes black,
can anyone advise?

Hi-
Could you check your system profiler for graphics, and post the model of the card that you have? The stock card is the Rage 128 with the following specs:
-ATI RAGE 128 Pro graphics card with 16MB of SDRAM graphics memory installed in a dedicated AGP 2X graphics slot
-Support for up to 1920– by 1200–pixel resolution at 32 bits per pixel (millions of colors)
-Apple Display Connector (ADC); carries analog and digital video, USB, and power
-15–pin mini D–Sub VGA connector
You say you have a DVI port (along with ADC) so, I want to clarify the card model.
You also state that the display worked once- in what configuration? Connected alone? Through the Dr. Bott's DVIator? That means from the DVI port to an ADC connector on the screen (but the 22" is a DVI connection)?
I found the following quote on the Dr. Bott's page:
However, the ATI Rage 128 card will not work with the 20", the 22" and the 23" Cinema Displays
To clear up confusion (mine), please carefully check your profiler, compare the ports of your card to the Display compatibility link (in above post), and let me know the results (what you have), along with a description of what connects to what. A model number for the display would also help.
Generally speaking, when a display goes black after the gray screen, the graphics card isn't compatible, or the necessary software/drivers are not installed.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

Double-tapping to switch between or clear running apps is not working with iPhone 4s.

when I double tap to close out or switch between running functions, it does nothing ever since yesterday. I have the most current update since last week and the home button works for all other purposes so it's not broken. Now my battery is draining because I cannot shut off running apps. Please help!

Hi Kate,
Welcome to Apple Support Communities.
It sounds like you’re running into a multitasking issue that’s preventing you from switching between apps or forcing them to quit. Try restarting your iPhone, as shown in the article linked below.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If that doesn’t do it, you can always try restoring the iPhone to factory settings too.
Use iTunes to restore your iOS device to factory settings - Apple Support
Cheers,
-Jason

Automatic clearing for Billing Reversal not working because of SPL 90

Hi all experts,
We recently implemented the Grants management module and SPL 90 is now active.
We are now having a problem with automatic clearing for billing reversals.
When I go to VF11 and try to reverse a document, the FI postings and FM postings seem to be happening. But the automatic reversal does not go all the way through because when it tries to post to special purpose ledger 90, it does not find the original document there and hence, stops.
Can someone tell me how to fix this?
Thanks a lot, in advance.
AJ

Can someone PLEASE look into this question?
I really appreciate your feedback.
Thanks.
A

Clear cache for items not working with multiple items

APEX 4.0, 11g. I've made a session state process that clears cache for items (item_1, item_2, item_3) but I keep getting an error "Unexpected error, unable to find item name at application or page level" I have now created 3 session state processes, each with one page item in it, and it works fine but as soon as I try to put more than one item in the process field, separated by commas, I get this error. Is there some other setting I have to change to make it accept multiple values in this field?

No, I wasn't using the parenthesis... just the items separated by a comma.
I don't want to clear the cache for all page items, just these 3. It works okay in 3 separate clear cache for item processes, just thought it was odd that I can't put all three items into one process separated by commas.

Tools is not working. Clear Private History is not working.

This is a new problem on 4 but I remember it being a problem on one of the old Firefox.
I can't clear my recent history.
In fact when I go back to Firefox a window appears saying restore recent session.

Make sure that Firefox closes properly.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

The Downloads Clear List Button Not Working In Firefox 19.0

Hello,
After upgrading Firefox to version 19.0 today, I noticed that the Downloads Clear List Button does not work & is always grayed/greyed out, and so you can not clear all downloads; and so you have to remove them each one-at-a-time.
I did not have this problem until upgrading to version 19.0
Screenshot:
http://www.use.com/showoriginal.pl?set=1c0659d1946249dc69dc&p=1
Thank you,
-John Jr

I made a bug report:
https://bugzilla.mozilla.org/show_bug.cgi?id=845450

RMI not working

I am new to weblogic and am trying to deploy an RMI implementation class in weblogic 6.1. I went through the example and it fails. I get no stub/skel classes or the proxy class I'm supposed to get when I run weblogic.rmic. I have tried numerous ways using java.rmi and weblogic.rmi but have not had any success. When I run the client program, I always get the following:
Error marshaling transport header; nested exception is:
java.io.EOFException
java.rmi.MarshalException: Error marshaling transport header; nested exception is:
java.io.EOFException
java.io.EOFException
at java.io.DataInputStream.readByte(DataInputStream.java:224)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:206)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:174)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:318)
at sun.rmi.registry.RegistryImpl_Stub.list(Unknown Source)
at TestRMIClient.main(TestRMIClient.java:44)

Hi Chip,
Can you explain what you are trying to do, I will try to see if I can help
you.
You can follow: http://e-docs.bea.com/wls/docs70/rmi/rmi_api.html to write
your implementation.
Best place to start would be with the examples shipped with WLS:
WL_HOME\weblogic700\samples\server\src\examples\rmi folder has the examples
and the docs that will help you run the examples.
If this doesnt help, can you please explain what you are trying to do and I
will see if I can help you out.
hth
sree
"Chip Truax" <[email protected]> wrote in message
news:[email protected]..
Answer really didn't help - I've tried several different protocols, t3,iiop, http. Nothing works - it looks to me that there is no entry in the RMI
registry, or that there is no RMI registry in Weblogic. According to docs, I
should see my object in JNDI tree, but I see nothing. Clearly the binding is
not working correctly. Also, the docs say I should get some sort of proxy
class or xml file generated when the weblogic.rmic is run - but absolutely
nothing gets output.

Error: ELM does not work from UI

Hello guru´s,
hard to explain this briefly, but here it goes.
We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works. But obviously, we need to do that from UI.
Besides this, we´ve implemented a Badi CRM_MKTLIST_BADI for a specific format but it´s never called from UI; however, if we simulate the execution from SAP GUI, this BADI works correctly.
Thanks in advance.

SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik

Why is Rectangle Tool's matching dimension feature not working?

With the Rectangle Tool's cursor is clicked in the document.
The Rectangle Panel appears.
A height dimension is entered.
With the pointer, the Width field is clicked.
Usually, the Height Value gets automatically entered in the Width field.
In this case it does not.
This same behavior is occuring in the Ellipse Tool.
What has changed?
Thanks
iMac 3.4Ghz 32 GB
OSX 10.8.2
Illustrator CS6

I may not have been clear on what is not working... the feature I am trying to create has been in Illustrator for several versions... another discusion on this site deals with the same problem...
see http://forums.adobe.com/message/4910715... it is explained...
'There has always been a one click solution, just like the help file says. Try it in CS5, click once with the tool, enter your width value, click on the word height, ill copies the width value into the height field, hit enter and you are done.'
it is this function that I have used for years.

Hosts.allow option spawn parameter not work

Hi,
I would like to use BlockHosts and spawn it with spawn keyword from hosts:allow, but option parameter does nothing for me.
I tried several configurations with different sshd entries and results are below
hosts.deny:
ALL:ALL:DENY
With hosts.allow:
sshd:ALL
I can connect to sshd.
With hosts.allow:
sshd:ALL:DENY
I can still connect to sshd. But I do not know why.
With hosts.allow:
sshd:ALL:spawn (echo "some tries to log" >> /var/tmp/sshd.tmp)
I can connect but nothing is written to temporary log file.
With empty hosts:allow I cannot connect to sshd.
I cannot find any clue, from man entry everything seems clear, but it does not work as it is written in doc.
Thanks,
Ondra
Last edited by xnovako2 (2010-02-20 16:53:23)

the Access files are read in order of /etc/hosts.allow, and /etc/hosts.deny
by default, /etc/hosts.deny contains ALL:ALL:DENY, only the first two are important, then third DENY is the placeholder for shell scripts, only the first two are considered, so ALL:ALL means that all daemons for all connections will not be allowed access, you can specifically add a specific service like sshd using sshd:ALL in /etc/hosts.allow to allow access.
sshd:ALL:DENY, the DENY part is the place where you should put the location of your shell script (absolute path), writing DENY will not deny it access
http://linux.die.net/man/5/hosts.allow
use the above link for a complete help on this.

Catalog search tool is not working.

Hi ,
IN CCM catalog search tool. When i wrote some thing on the find field click on go button. Nothing will happen. It should search the products in the catalog ..can any one tell why search option is not working inthe catalog search tool...

Hello,
first delete system cache by going to ...
tools -> internet options -> Delete files with offline content , delete cookies and clear history.
If not working then contact basis ..delete the template and MIME cache in SRM thrugh SITSPMON and reactivate all the internet servies through SICF.
Thanks
Venkatesh.
PS : please reward for helpful answer

GR/IR Clearing F.13 is not working

Similar Messages

Maybe you are looking for