GR/IR not auto clear in system

Hi All,
GR/IR not auto clear in system
Normally every week end the system automatically clears the open items in f.13, But this time it has not clear the open items
What could be the reason the system not to clear open items on the week end.
So that's the reason the user manually cleared the open items
- User has performed F.13 on 26th of Oct but system didn't auto clear the open items.
- Those documents are posted prior to 26th of Oct and user would like to know what cause to incident.
Please suggest me what should be the reason to come out of this issue.
Thanks in advance
nandha
Edited by: nandhasapfi on Nov 8, 2011 1:07 PM

Hi All,
I trying to auto clear fbl3n open items in f.13, every week end the system defaultly auto clears all the open items in the system but last weekend it has not been done that job.
Suggest me what should be the reason for the above issue.
And i checked in OB74 for the G/L a/c 123456 they have configured the below thing
chart of account ABC
a/c type S
criteria 1 zuonr assignment
criteria 2 vbund Trading partner
criteria 3 ebeln   purchasing document
criteria 4 ebelp   item
criteria 5 empty
Suggest me Still any thing required to configure for auto clear the open items of fbl3n
Thanks in advance
Edited by: nandhasapfi on Nov 10, 2011 11:45 AM

Similar Messages

Document not auto cleared after performing FF67

Hi all,
firstly i would like to acknowledge that i'm using version 4.7.
after performing FF67, bank recon document generated in main bank & clearing bank GL accounts. But it is not auto clear in the clearing bank GL account. the treatment is as post GL account & manual clear.
after checking:-
1. trans type ABC using int. algorithm 15 - use assignment field to clear.
2. posting type in posting rule is 4 - clear debit GL account
in FF67 screen variant, assignment field entered the same as assignment value in clearing bank account. by right, the documents will clear off automatically.
anyone can assist what else that i miss out?
thanks in advance.

hi..
we can perform manual clearing or F.13, but the pupose of having such posting rule and posting type is to minimize steps of clearing.
by right, once ff67 posted, the clearing bank gl account will get cleared.

GR/IR a/c not auto-clearing

Hi All,
The GR/IR account has to be cleared automatically once the Invoice Receipt matches Goods Receipt. However, this isn't happening since Jan 2nd, 2007.
I checked the scheduler that schedules auto clearing, it appears to be correct.
I checked auto clearing (SAPF124) configuration, the first criteria is Purchasing Document (EBELN) and the second criteria is Item (EBELP).
What can be the possible reasons? What can I do to atleast find why the error is occuring. Is there any diagnosis i can do?
Regards,
Tejas

Hi Melody, sorry for the late reply. As I understand as per the SAP documentation, that quotes in referece to the GR/IR special indicator,
"It only makes sense to use this indicator if the assignment of invoice receipts to the corresponding goods receipts using the purchase order number and the purchase order item is not sufficient (such as with scheduling agreements)."
If this is checked, then in addition to the PO and line item ("EBELN EBELP" which is specified in OB74) "documents are assigned to GR/IR accounts using the material document".
So when you check this indicator you're comparing 3 things, material doc, PO number n line item. In a PO you dont need to compare material doc. If you do check the box there would be no error thrown, just that it would slow down the system. Hence, it is advised not to check the "GR/IR special indicator" in case of a PO.

MBAM will not auto encrypt the system partition

First after reimaging, I need to use tpm.msc to prepare the TPM, as the TPM is running in reduced functionality. The computer reboots and clears the TPM. After the reboot, the logs no longer show any new errors.
However if the option “Configure the number of noncompliance grace period days for operating system drives” is set to zero; nothing ever happens. There are no errors in the logs.
If “Configure the number of noncompliance grace period days for operating system drives” is unconfigured. The user is prompted to encrypt, if the user choses to encrypt everything works correctly.
We are using HP Probook 6545b notebooks
Below you see the MBAM policy.
I must have missed something in the BIOS or the policy, but what?

I have checked the MBAM node in Event Viewer, policies are applying successfully. We are not using a PIN. I am beginning to believe this is a hardware limitation. As on a newer notebook I only needed to use TPM.msc to manually, prepare the TPM and after
reboot automatic encryption began. I need to solve the issue with manually needing to prepare the TPM.

In EBS document not get auto clear Algorithms 11

In Electronic bank statment document not get clear automatically while batch run.
I update check no to payment document. even though it is not get auto clear.
in OT51 assign Interpretation Algorithms 11 011:(Outgoing check: Check number not identical to document number)
why it is not get auto clear with check number.

011 = Outgoing check: Check number not identical to document number
012 = Outgoing check: Check number identical to document number
The "document number" in the descriptions is the payment document number - the FI doc that cleared the invoice. If you use the payment document number as the check number - and thus that is the number the bank includes in the bank statement - then you would use algorithm 012. If you create a check in the check register that is a different number than the payment document - and the check number is the number in the bank statement - then you would use algorithm 011.
Search SAP Help for a document titled "Interpretation Algorithms". This document includes descriptions of all the standard interpretation algorithms.
Regards,
Shannon

Auto-clear only credit note with customer invoice (not receipts)

Hi all,
I have a query in regards to auto clearing. Program SAPF124.
Is it possible to run the program that will clear only credit notes against invoices, and not receipts!
Thanks a million.
Regards
Tonia

If you have different document type and different number ranges for credit notes and payments, restrict the selection by document number ranges e.g from 1900001 to 1999999.
Regards,

FPMA auto Clearing is not working.

Hi All,
FPMA auto Clearing is not working.
Scenario
Contract account is having open invoices and also open credit items. The total open invoice amount is equal to the total open credit items. So the contract account balance is ZERO.But the open credit items and open invoices are not having a clearing document because its not cleared. I have executed FPMA transaction with proper parameters but auto clearing is not happend.
Questions are:
1) what would be the reason behind not functioning the auto clearing
2) Job log of the FPMA program is showing exceptions ( some times with execption 6 and some times with 10,etc) . is there any table to check exceptions.
3) what is the diff between FPL9 ( account maintenance ) and FPMA auto clearing.
Regards,
Will

Hi,
I have put together all the possible scenarios in my previous post against the failure of auto clearing.
Now to elaborate my point (i)(ii)-
(a) There is an object called clearing lock which you will find at the document level.which you will find in the payment data tab of the display document screen.
If there is any value in the clearing lock, it indicates that the particular item will not be cleared.
Also check for the posting lock field at the contarct account level. This field prevents any new line item to be posted into the account.
(b) Items which have clearing restriction 8 can't be cleared with any other item nor they can be dunned.Clearing restriction field is also there in the the payment data tab of the display document screen.
I would recommend you to perform the clearing through Account maintaineance (FP06). If it gets cleared, then there is some bug in the clearing control config for Auto clearing.
If it doesn't, then it will throw some error in the status bar. Just go thru the error and you will be analyse it further.
Hope it helps.
Thanks,
Amlan

Will system not AUTO re-draw the field's lengthsas per specified# of CHARs?

Hello
I am developing an interactive form with webdynpro ABAP.
I want to restrict the user to enter/input a specified number of characters in the input field, say, its NAME field, then i want allow user to enter 35 CHARs (in SAP the NAME field length is 35 CHARs), fo this am specifying the 35 as Max. Characters under Limited length under Filed tab of Objest on the form itself, its working fire.
But, i want system should design the WIDTH of this NAME input field equals to 35 CHARs only, even i manually draw this NAME field until right end point of form (its nearly 225 CHARs length), am looking that the system should auto re-draw the input fields as per the specified # of CHARs in Max chracters in the form
Do i need to do any settings to achive this? or auto re-draw is not possible ?
Thank you

Hi,
Its not possible to that system draws the width depending on the max chars at design time. And its because of the reason that characters in that field will be dynamic and system won't be knowing the width of every Character. For example 'I' and 'A' has different width. However the system can set the maximum number of characters and also the width can be expended as per the size of characters at run time. For this functionality you can set width in layout as "Expand to Fit".
In case you need to fix the width at design time only, then check by putting a value containing 35 chars in the default value field and fix the width in layout.
Regards,
Vaibhav

CUSTOMER AUTO CLEARING F.13

Hi Friends,
Presently I am facing one problem Customer auto clearing F.13
My client scenario is first they post the Credit memo because they might be having sale returns on earlier sales
In the invoice they mapped that credit memo no. in Reference field.
While doing F.13 Earlier the system was not considering this credit memo and it not clearing the amount. The auto clearing is happening for normal entries only it means invoice and payment.
I maintained this reference filed in OB74 for account type customers. After my changes the system is not considering for normal entries also for auto clearing.
Please suggest what to be done at the earliest.
Its urgent.
Regards
Sai

Yes Jehade, you can.
But take into account that you do not set Amount (DMBTR) as a grouping criteria for those accounts, and in case you've set Assignment (ZUONR), the three open items must have the same ZUONR, otherwise it will not clear.
On top of that, if you have small difference you can configure tolerance groups in IMG and assign them in the Accoutns Master Data.
Hope that will help.
Regards
Fede

Auto clearing F.13

Hi Friends,
Presently I am facing one problem Customer auto clearing F.13
My client scenario is first they post the Credit memo because they might be having sale returns on earlier sales
In the invoice they mapped that credit memo no. in Reference field.
While doing F.13 Earlier the system is not considering this credit memo and it not clearing the amount. The auto clearing is happening for normal entries only it means invoice and payment.
I maintained this reference filed in OB74 for account type customers. After my changes the system is not considering for normal entries also for auto clearing.
Please suggest what to be done at the earliest.
Its urgent.
Regards
Sai

Thanks Srikanth! You mean, there is a predefined GL account to be cleared for open items or in case of customers it clears all customers predefined in the variant say customer 1200339 to 1250699. Thanks for the answer.
I have had another question regarding when you run the clearing process, it shows which accounts were cleared. When I ran the process for customers, it usually shows a debit and credit amount for a cleared items for eg. 100, and -100 clearing the account. But in this clearance it only showed a few debit amounts of -100(item 1- one column1), -150(item 1- another column2), 3000(column3) and 6000 (column3) and the for column 3 the total come upto 9000 with the message "total in document currency"
I have an image file with the problem if anybody wants to see it, i can email it to the person. Thanks
further points will be assigned.
Jason

Auto clearing of Accounting entries posted via MIRO & MR8M

Hi Gurus,
Currently we are doing the development relating to u201CDuplicate Invoice checku201D.
In one of the scenario system is referring the Accounting document of the cancelled MIRO.
Subject accounting document is there in the open items (FBL1N) and the corresponding reversal accounting document (Generated via MR8M) is also reflecting in the Open items (FBL1N).
MIRO documents get cancelled via T-code u2013 MR8M & the Material documents shows the cancelled / relevant document reference against each other.
Since both of our accounting document (generated via MIRO & MR8M) are appearing in Open items system is referring that in our Duplicate Invoice check development which we want to avoid.
If I am not wrong, in case of SD Billing document if we reversed, system automatically cancelled the relevant accounting document against each other.
Does anybody have an idea as how to clear these 2 accounting documents (MIRO & MR8M) against each other ?
Regards,
Shridhar

Hi Prasad,
Thanks for the option but we had aready given a though about clearing the Vendor line items.
In stead of F-44, we can set the F.13, background scheduling with daily execution and can clear the documents. Background execution in the night will occupy our space hence need instant result if possible. As well as background execution will happend in the timing after office hours so could be the case that before doing auto clearing someone may get the concern cancelled accounting document pertaining to the cancelled MIRO (Vendor Invoice - Line item) in the open items.
While doing the MR8M (Logistic Inv Reversal) alongwith Material Document reversal can we clear the accounting documents instantly on its own against each other ?
Regards,
Shridhar

Auto Clearing of Customer Account with Special G/L W

Dear Experts,
Currently auto clearing of customer account with norm items is running smoothly.
When we tried to run the same for Special G/L Indicator "W' in F.13 tcode , it is not happening (Category 'W' special G/L transaction were
not selected).
Even we tried to change the rules in Ob74 but no luck.
We can do manual clearing through F-32 but the volume is very high on every day.
Since we considered Open PDC's is one of the criteria for credit control customer in our business and hence system is blocking
all customers where documents having special g/l w even though net amount is zero in fbl5n.
Could you please suggest me how to do auto clearing.
Regards
Shaik

Hello,
Are you trying to clear Bill Of Exchange (SGL Code W) with F.13 ?
You have to use the remittance process (FBWE and report S_ALR_87012211).
Regards

Auto Clearing of MM Invoice verifivation thro' MR8M

Hi!
While reversing the MM invoice verification passed through MIRO by Transaction code MR8M, system gives message " doc xxxxxxxxxxx" reversed. Please cleare manually"
Is there any way by which the system also cleares from open item the vendor / CenVAT clearing & GR/IR Clearing?
Please help.

Hi
We are on SAP 4.7. Ya, u r right, we have to clear the vendor account by F-44 & clear the GL account by F-03.
The transaction J1INC is for classic TDS which we are not using. What I am looking for is an auto clearing for MM Invoice verification passed thro' MIRO.
Is there other solution? If possible, please send screenshots also.

Bank Reconcilation Statement (EBS)- Auto clear

Hi,
I am configuring EBS (format is S SWIFT940). I would like to know how the program would auto clear from the clearing account for cheque payments during importing TC:FF.5 the bank statement. In which field does the cheque no get updated.
Thanks
Suresh

Hi SS,
If I understood your Q correctly then you would like to know when the bank statement get uploaded through FF.5, how SAP finds open item (Customer Invoice / Vendor payment line item) and match with the line item mentioned in the bank upload file.
As per standard SAP,
1) The Upload file will first update following three tables when you upload Bank statement through FF.5
1 FEBKO - Electronic Bank Statement Header Records
2.FEBEP - Electronic Bank Statement Line Items
3.FEBRE - Reference record for electronic bank statement line item
2) There is internal algorithm through which it will match cheque amount and clear the open items.
3) The standard SAP does offer user exit to write logic through which you can match open item and clear customer / vendor payment item and bank line items.
The table FEBRE is having three fields note to payee1, note to payee2, note to payee3 where you can store only following FI fields into this fields
1. Reference (XBLNR)
2. Assignment (ZUONR)
3. Text (SGTXT)
As per your requirement you may pass any values through this fields and compare with open items already exist in the system and clear both items.
I hope you will be able to make out now, how exactly EBS matching process works.
In case you have any doubt then pl. let me know.

Mac Pro does not auto-sleep (manual sleeping if fine!)

I have a small annoyance with my 2009 (Nehalem) Mac Pro I am wondering if someone can help with, or suggest something, please:
The Mac Pro does not auto-sleep; ever. I have played around with the sleep time settings, and enabled or disabled the 'sleep drives' option, but to no avail. Mac Pro will stay on, no matter if I am logged on OR even on the 'log on users' screen.
That said, I can sleep the Mac Pro manually at any time, and without any problems; it stays asleep without a hitch, and wake-up is flawless.
There is nothing in the console log that would tell me why the auto sleep doesn't function. I deleted the sleep plist and re-set, but again, no change.
Any ideas? Not sure what could signal the system to not do auto-sleep?
It's running 10.6.3.
Cheers,
Dan

Exactly the same problems as those described above: forced sleep works (by using the power button or closing the lid) but automatic sleep doesn't (using 'Energy Saving' preferences).
Tried every single piece of advice here and on other posts: reset PRAM/ SMC, verified disc, repaired permissions, deleted the power saving preference files, cleared caches & history, restarted in every conceivable mode... The only things that worked were safe boot and creating a new user account which means it must be a software issue.
Disabled/ removed/ paused/ reinstalled every piece of software I could but to no avail. The most frustrating thing? Having to wait for 5 mins every time I tried something to check whether the damned thing was going to go to sleep.
In the end, and in desperation, I took the advice of Dino X and downloaded PleaseSleep. Success! A genius piece of software. It forces sleep when the Energy Saver preferences cut in but, even if I don't set exceptions, it won't force sleep if there's a DVD playing (for example).
Only had the Mac for a few months and I'll never go back to that other, unmentionable operating system; the Mac's just too good but I'm vexed that I'm having to use third party software to get it to work as it should (and was) - feels like a bit of a Win*s solution to me.

GR/IR not auto clear in system

Similar Messages

Maybe you are looking for