GR Posting before Putaway - Urgent

Hello Gurus
I have a situation. I have an inbound delivery for PO. The client wants to post the GR and then move the materials. I dont have HUM in place. I have set the LC:HUM:Basics:Delivery:GR mvt before TO creation indicator for this warehouse. I also read in the help.sap that you can do this. But when i try to do this, i get the following error:
Delivery has not yet been picked/putaway
Delivery has not yet been completely processes in WM.
Please let meknow what config change I have to make to make this happens.
Thanks in advance
kaushik

No
Its not possible to post the GR for a schedule line is the schedule date is in future.
The system will not allow you & will show only " xxxx doc does not contain any selectable items ' only.

Similar Messages

  • Post Goods Receipt before putaway

    Hi Experts,
    We're planning to implement SAP WM of SAP ECC 6.0. We're using inbound delivery for our goods receiving into the warehouse.  The process steps  that I found out from the SAP document is as follows:
    1.  Create inbound delivery
    2.  Pack if necessary
    3.  Putaway
    4.  Confirm Putaway
    5.  Post Goods Receipt
    We've business requirement to do the Post Goods Receipt before putaway.
    I do not find the configuration for this requirement.  
    Could some-one help me on this?  Any help on this would be greatly appreciated.
    Please send me the documents how to configure this.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi Philip,
    Thank you for your response.  I have found-out the same option as you mentioned from the 4.6c release notes.  I tried and it's still not working.  Don't know the cause for not working.  Any thought on this?  Please let me know.
    Thank you again,
    with regards,
    Muthu Ganapathy.

  • BAdi or User exit to use in MB26 to avoid posting before saving of mat doc?

    Hello Experts,
    Can anyone tell me which BAdi or User exit to use in MB26 to avoid posting before saving of material document?
    I have requirement to stop posting incase of negative invetory in issuing storag location.
    Thanks

    Hello,
    The issue is currently we alllowing the negetaive stock at storage location level.At this movement , we want to avoid the negetive stock creation while posting the Mat doc with MB26.Before saving the material document I want check the stock levels in MARD , if the stock levels goes negative from this posting, then I want to stop the document posting.
    Thanks

  • Create idocs for FI documents posted before ALE setup

    The users were creating FI documents normally during May 2006, but the ALE financial interface was not set up until the end of that May.  We are using a FI message type which is a copy from a standard one.
    Is it possible to create idocs from those FI documents posted before setting up the ALE connection so those FI documents can be sent via ALE?
    CM

    To copy number ranges to a new year you do with the transaction OBH2.
    When you want to transport number ranges you ask for problems. Only for a new implementation you can do it but not when there are existing number ranges with postings for that company

  • Error in posting key-very urgent

    Dear expert,
    Please advice. My client do mistake when running manual posting (program for replacing EXITSAPLIEO1_007_in Good Receipt). This program is manual posting after GR created and will made posting key for credit entry (posting key 50, display in FBL3N. In program, we input material and comnos. The problem is, the PO is already GR in year 2004.
    What should I do to cancell this error (we would like the PK/this PO not appear in report this year-FBL3N).I have tried to do reversal doc for material and comnos contain error in the program, but still facing error in FBL3N.
    Please your advice very soon.
    Thank you in advance.

    In FBL3N we can see PO doc with posting key 40 & 50. (G/L account xxx-Stock in entreport).This is AP transaction-integration with MM module.The posting key 50, will be created after GR posting using manual posting program (called : ZGR=program for replacing EXIT_SAPLIE01in Good Receipt).
    There was mistake that my client re-run for GR which already posting before (in year 2004). It makes error in report (FBL3N) that the PO (GR in year 2004) appeared with only PK 50.This is would make total amount report for this month/year 2007 error).
    How could I cancelled the posting that my client have made? We would like no amount for the PO which reposting by my client not appeared in the report.FBL3N(delete / cancell)
    Please advice. Thank you.

  • Artwork   posted before but no reply, PLEASE HELP!

    Not showing up on iPod.
    I drag/ copy and paste or load my artwork to songs and albums on itunes and it works.
    I plug iPod in and it syncs it. But when I look at iPod I only see song name/ artist/ album, no artwork.
    Any reasons?
    Suggestions for help?
    I have posted before and got no answers!

    Try these steps, and see if it affects the way the album artowrk is showing (or lack thereof) on your iPod:
    1 - Connect your iPod to your computer.
    2 - In iTunes, click on your iPod in the Source List.
    3 - Under the "Music" tab, you will see an option called "Display album artwork on iPod".
    If this is already selected, try deselecting this option, click the Apply button to save your settings, and eject/disconnect your iPod.
    Then, reconnect your iPod to your computer, re-select this option, and disconnect it from your computer.
    If this setting was not selected when you checked on it right now, then simply check-mark this option, and click on the “Apply” button to save your changes.
    Then, disconnect your iPod from your computer, and see if the album artwork is working now.
    If that doesn't work, then have you first tried resetting your iPod? To reset an iPod:
    First, toggle your iPod's "Hold" switch back and forth a couple of times. (Make sure to leave it on the white side of the switch).
    Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
    If a few attempts at resetting don't help with your issue, then I would now suggest that you try restoring your iPod to factory settings in iTunes.
    For info on restoring an iPod, see this article about that:
    Restoring iPod to factory settings
    -Kylene

  • Argentina Electronic Invoice - FI Document posted before approval

    Dear Guru´s.
    We implemented the Argentina Electronic Invoice and find a problem with FI documents.
    When we created billing documents from Argentina, this must be blocked to accounting and posted after approval electronic response by AFIP.
    We executed a test with billing documents and this was posted to FI before the approval by AFIP through transactions VFX3 or VF02.
    There´s any standart solution for prevent to this FI documents never can be posted before to the approval by AFIP?
    Thanks for all sugestions or help.
    Silvana Santos

    Dear Krishna,
    Thanks for your help,
    1.Posting block:You can assign a posting to your billing document type by using the T.Code "VOFA".System will not release the billing document for accounting.It will be done after by using VFX3 T.Code.You can provide authorisation for this T.Code to certain users only.
    Response: We used this configuration and all documents for accounting are generated blocked. But in to Argentina electronic process the documents  accounting just unblocked if authorized by AFIP. Our problem is the documents are unblocked by inadvertently running step to use transaction VFX3 before the approval.
    ie is necesary keep locked until approval by AFIP even if the transacction VFX3 for example be executed.
    best regards,
    Silvana Santos.

  • Itunes to ipod (please post before thursday 4/28/06)

    I set my ipod's default computer to a different computer than what I wanted. But I thought I definitly wanted to stay on that computer so on the computer when it asked me if I wanted to set this computer as the default ipod computer i pressed dont ask me this again and answered no. Now I changed my mind. Please help meset this computer as the default.

    Please don't get pushy demanding a response. Everyone here is just a fellow user, replying as we have time and knowledge to contribute. No one gets paid to help here, so it may take some time - certainly longer than just the few minutes between all your posts - before someone replies. Getting pushy will just irritate people and make them less likely to want to help you.
    As to your problem, try this:
    Using iPod with multiple computers
    Perhaps that might help.

  • View Messages Posted before June 3, 2005

    NI upgraded the Japanese Discussion Forums June 3, 2005.
    To view discussions posted before then, use this URL:
    http://newsgroups.ni.com/cgi-bin/dnewsweb.cgi?cmd=xover&group=natinst.public.jp.labview.general&utag=
    Thanks!
    Molly K.
    Web Support & Operations Manager
    National Instruments

    I've had exactly this problem, the slider to answer doesn't work. I almost never use my iPhone as a phone (have another phone for that) but today my daughter phoned me a couple of times since we were shopping for Christmas presents. It looked like every other call was successful. She called me three times two calls each time, on all occurences, the iPhone was unresponsive at the first attempt, not possible to answer. When she called again some seconds later I was able to answer, the same behavior three times! Is there a solution for this bug? Until solved, I´ll stick to using my iPhone for everything except using it as a phone, rather crappy to not be able to answer calls every other time...
    Don't know if the problem is related to 3.1.2, have only used it as a phone a couple of times before upgrading to 3.1.2,

  • No Stock posting before usage decision

    Hi,
    I am in process of implementating QM Module.
    I want to block stock posting from Inspection lot to unrestricted use (or any other use) before Usage Decision for the lot is taken.
    Can anyone give my solution for the same? Are there any SPRO settings for the same?
    Regards,
    Prashant Kolhatkar

    Hi Prashant,
    You must implement the User Status profile QM_L_003  No Stock Posting Before UD.
    Herewith I am pasting the ready made solution hoe to prevent UD before RR is done. What you need to do is change the Business transaction as per your requirement to this status profile.
    You can refer wither this [THREAD |DOCUMENTATION FOR THE BENIFIT OF ALL QM CONSULTANTS u2013USER PROFILE;or this [wiki |https://www.sdn.sap.com/irj/scn/wiki?path=/display/plm/setupofauserprofiletoavoidtheUDpriortoRR]to know the process step by step.
    If any query, pls revert with your detailed configuration of the status profile.
    Regards,
    Shyamal

  • Urgent help-Please post before 2:30

    I have windows and my ipod isn't showing up in the itunes, and the updator says I need to close all programs using the ipod before uptading or reseting. However in the My Computer menu the third drive E shows up. My computer also either freezes or becomes very slow when my ipod is plugged in via usb. I already set the usb ports up with power. The iPod is also fully charged. Please help.
    Thanks in advance.

    while on the subject i just bought a ipod 60gb video. I have a 20 gig gen three ipod can i use that charger from the g3 to ccharge the video 60
    the old 20 gig i'll use as a fire wire hard drive
    g5 g4 laptop se 30 Mac OS X (10.4.6)

  • Re open the closed Posting Periods - Very Urgent

    Dear Experts,
    We have an urgent problem to solve.The company code currently we are configuring uses fiscal year (oct - Sept) and the other company codes in our client site uses (jan -Dec). So by mistake we closed posting periods using MMPV upto 2007 03 but it should be 2006 06(correct me if i am wrong).
    As we are still in baseline configuration we don't have any material document in the current company code. From this forum I got some solution to intialize the posting period using MMPI(which directed me to use SAP Note 487381).
    Now if I do MMPI with the directions mentioned in SAP Note 487381, will i face any problem now & in future.
    Please suggest me and help me as has become hurdle for the test process.
    Thanks in Advance...
    Nagesh Aswartha

    Hi Aswartha
    As you do not have any material documents , pl go ahead and initialize the periods. Should not be a problem.
    I normally do this to avoid errors:
    In MMPV, never give a period. Enter the current date(or first date of the month) in the date field and execute closing program.
    Best regards
    Ramki

  • New event in iCal posts before completing event name

    I am about to implode...While I am entering the title of a new event, iCal will either delete midstream (while typing), or automatically bring up the edit screen while typing. This began after an upgrade was installed. Also, when trying to move the event, iCal automatically moves the even back to the original time. HELP...before I throw my MacBook out the window!!!!

    1. Click on an event.
    2. A bar with a dot on then let side, the name of the evet, and a hardly visible small edit button on the right side will appear.
    3. Click the edit button: the edit window will open.
    4. Scroll down to the large red Delete Event button.
    5. Click the Delete button.
    New iPad, latest IOS. I do not see the Trash icon mentioned in the other post. Maybe an earlier IOS.

  • GR Posting before Schdeule date

    Hi Gurus
    Is it possible to post the GR for a scheduling agreement sch lines well before the date of schedule lines ?
    Edited by: Raja Krishna on Aug 28, 2008 7:11 AM

    No
    Its not possible to post the GR for a schedule line is the schedule date is in future.
    The system will not allow you & will show only " xxxx doc does not contain any selectable items ' only.

  • Depreciation Posting in AFAB (urgent Pls)

    Hi All,
    pls let me know y the depreciation posting is not hapenning when it is showing Document created in Test run. It is not showing any errors nor is it posting. urgent pls.
    Chatura.

    Hi,
    Thanks for replying. It did not create any RABUSH Session .
    1) I created an Asset and gave the Depreciation Start date as     01.09.07.
    2) then i posted an entry in F-90 with transaction type 100, on     01.09.07.
    3) The periods are kept open only.
    4) The number Ranges for AF Document exists.
    5)i did an unplanned posting run for 1 to 8 periods. for 9th period i did the Repeat run . It generated an accounting entry with AF document type.
    6) now if i'm trying to do the test run for 10 th period it shows that the Document is created but in the repeat run it is neither posting the document nor is it showing the error.
    I was not able to analyse the reason.
    Pls help me out. Also pls let me know where to select the direct FI posting in asset accounting. Points will be awarded infull if the issue is solved.
    Regards,
    Chatura.

Maybe you are looking for