Gr process is not completing for since 2006 while running batch job.

Hi,
we r running batch job and its not delivering material .in po history it showing not in Gr place. plz give reason and solution for this.
Thanks,
Sydanna

hi,
if you have alrady post that doc then pls check in migo- display & check th'r in thaty doc. batch is created or not or check storage location & plant plant also , it th'r is mistake while doing the migo then reverse./ cancle it
next go to in mm01--select that material no - select all the necessary subsereen inculuding plant/ data data store-1 & plant/data stor.1-screen -
click on batch management --& save
after that you do the grn againt of that po
thanks
santosh

Similar Messages

Workflow process does not complete for 3500 but works for about 10 records

Hi Gurus,
I am a novice in workflow. Pls bear if the questions are very basic.
We have a old custom workflow process which is inistaed by a PL/SQL procedure
WF_ENGINE.CreateProcess ---
WF_ENGINE.StartProcess ---
COMMIT; ---
Now this process has run for over 6-7 years but has always processed max upto 8 or 10 records at a time. Now we had about 4000 records in a table and the process was running for more than 4 days now and it has been termiinated.
I could not see any new item_keys. Is it because we have a commit only at the end.
This process has 3 sub processes. they are connected by 'AND' and then we have an 'End' node.
The first sub-process is simple and we can see a record in wf_items .
Howver no records are there in wf_items for the 2nd and 3rd sub processes.
How can we check the point where it has hanged. Querying Status monitor just gives the first sub-process that has completed. How to debug for these cases.
This has always worked for small volumes. Now we have about 4000 records and we face this problem
The process actually checks data from the table and based on some conditions , it send 5 different notifications to 5 different mail groups. So we expect about 4000*5 mails to be sent.
Any help is welcome.
Thanks,
L
Edited by: 901929 on 20-Jul-2012 01:38
Edited by: 901929 on 20-Jul-2012 01:39

L,
Please check the following:
1. Since this is pure PLSQL you can have a SQL script where you enable a database event to get a trace and then run tkprof on the output to spot any performance problem. You can use something like:
alter session set tracefile_identifier='Background' max_dump_file_size='unlimited' events '10046 trace name context forever, level 12';
begin
wf_engine.CreateProcess(...);
wf_engine.StartProcess(...);
end;
commit;
alter session set events '10046 trace name context off';
select fnd_debug_util.get_trace_file_name() tracefile from dual;
2. Do you happen to know if WF runtime tables are being purged regularly? If this is not done you can expect serious performance problems. If this is WF Apps embedded you need to clean data using the concurrent request Purge Obsolete Workflow runtime data, if not then you can use the APIs in package WF_PURGE.
3. You will only find one record in WF_ITEMS for this process if those sub-processes belong to the same item type
4. About the notifications, make sure you are not running into this design problem: https://blogs.oracle.com/oracleworkflow/entry/looping_within_a_workflow_process
Regards,
Alejandro

Error "Lock not set for: Generate index" while running process chain

SAP BI 7.0
SP 17
I am attempting to run a new process chain and the generate index steps are failing with the below errors:
"Lock NOT set forGenerate index"
"RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

Hello,
So Create index is getting failed in you PS right?
1)check if any other loads are running to the same CUBE(May be from other PC's also)
Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
2) If the Create index is running for long time, then got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
Hope it helps!

Process chain Error: This AND process is not waiting for event RSPROCESS

Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.S

Hi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli.

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

GOODS RECEIPT IS NOT COMPLETE FOR ITEM

Dear Friends,
Created Repai Order having sublet (external service) and then did complete purchase process for same. I have crated PR / PO did Goods recipt for whole quanity and also did invoice for this PO.
Now when trying to do blling getting error GOODS RECEIPT IS NOT COMPLETE FOR ITEM.....
Also in dosument fow its showing PR / PO / GR nos.
But in STAS OVERVIEW showing Goods Receipt as OPEN
any suggetions ???
Regards

Hi
In transaction code you are checking and whats excat error message system is giving ?
You can tick Delivery Completed" Indicator in PO and see whether it helps ?
Check
Kishor Rudani

HT201210 Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.

Error "Data packet not complete; for example, 000013" when reading from PSA

Dear all,
I have an issue with my data loading, when i execute my infopackage, i specify that it should be loaded into PSA before going to the data target. in my infopackage request i notice that i have got missing data package
e.g.
Data package 1 : everything OK
Data package 2 : everything OK
Data package 3 : everything OK
Data package 8 : everything OK
Data package 10 : everything OK
Data package 12 : everything OK
Data package 13 : everything OK
what happen to data package inbetween e.g. DP4, DP5 etc etc?
In my "step by step analysis" under the status tab everything is green and nothing seem to have went wrong, no short dump, no job cancelled, nothing.
Since everything "seems" to be alright, when i try to update subsequently to the data target, i get the following errors below.
Data packet not complete; for example, 000013
Request has errors / is incomplete
I got 2 questions here...
1. why do i have missing data package and it still showes me a green idicator?
2. how can i solve this and is this something i should be worried about?
Thank you very very much!

Hii SCHT,
you encounter these type of errors rarely...
but in RSMO screen, check for any TRFCs struck..
also go to the JOB in Source System and analyze the JOBLOG,
there you can find some information about what tht particular job did..!!!
and after that check for the same in the BW system...
perhaps while transferring?extracting the recordsthrough data packages, it might have missed ..
Force the request RED and repeat the IP again...
you dont need to worry about anything...simply force the request red and reload.. just let us know if the problem still persists after repeating the load...
Regards
Prince

WM staging of materials not completed for entire quantity

Hi all,
I get this warning when I try to stage materials for a production order:
WM staging of materials not completed for entire quantity
The system allows you to continue with the process but in the end you find that some of the materials are not staged and you may need to create regular TOs for them.
Can anyone suggest how I can fix this problem??
Thank you very much.

Hello,
Please try setting the Complete material staging indicator for the PP interface via:
SPRO->Logistics Execution->Warehouse Management->Interfaces->Define Porduction->Whse Number --> For you warehouse, tick the complete matl staging indicator.
SAP helps do state that " When the system generates transfer orders for transfer requirements from production (PP), this indicator controls whether a complete staging of materials must take place. This means that the system must generate transfer orders for the total quantities of all items in the transfer requirement."
So hopefully, this should help.
Thanks,

OTO information not complete for non ABAP instance of system &1 in SMSY

Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban Hartzstein

Hello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein

Method 'PROCESS' is not defined for object type 'BUS2081'

Hi All,
I am using a workflow for incoming invoice approval using WS20001004. I prepared one version for this. The standard business methos bus2081 i delegated to zbus2081. Here i placed one decision step for reject or approve. In the same task in inbox i can see the document i can see as attachment. Now the issue is after seeing the attachment when i click on task in my inbox it status is changed to red and i can not process it further.In log i can see the error like Method 'PROCESS' is not defined for object type 'BUS2081'. This method i do not have in standard or in delegated one. I was struck here. Pleas help in this.
Regards,
Madhu.

Hi,
"Here i placed one decision step for reject or approve." if your workitem is based on standard user decision step type of workflow, then the business object in underlying task should be 'DECISION' and method should be 'PROCESS'. I think in the task you have put your custom business object instead of business object 'DECISION'. This could be the reason you are facing error.
Regards,
Ibrahim

When I download Adobe free trial, download completed, then no more information pop up, why? I mean it is not complete for installation yet.

When I download Adobe free trial, download completed, then no more information pop up, why? I mean it is not complete for installation yet.

Flash was designed for computers with cooling systems, it runs fine on my single core Atom netbook even.
The new iOS devices come with dual core Atom-like A4 netbook processors, but atlas! no Flash.
It's because Flash needs cooling and those iOS devices don't have it.
So dump the phone if the lack of Flash is such a bother, it's a overpriced, over rated phone that has little purpose that a regular phone with text messaging, a laptop, a GPS, a camera and a iPod can do so much better and cheaper as they are separate devices with more abilities.
Check out this poll.

Import process does not complete

When loading photos everything seems OK until the last photo shows being uploaded. Then the "Finishing Upload" bar never shows completion of the upload process. However, the window with two buttons (keep photos in camera or erase photos in camera) is present and operable. I can wait forever - hours for the progress bar about finishing upload to disappear indicating completion of this process but the bar just remains on the screen. I then click on the keep the photos and the process seems to complete normally. I then can edit the event just loaded, all pictures are in the event and each can be edited. The event just imported shows up in the 'all events". Then when I close iPhoto09 and later launch the application, that latest event is nowhere to be found. Last import is a blank screen. Selection of 'all events' shows all previous events but the one just imported is not there.
Then to see if it was a hardware problem with the card reader or the CF card itself, I imported them successfully on a Macbook with no problem and they were there upon and close and re-launch of the application iPhoto08.
I believe the problem lies in the fact that I never get a completion signal of the import process, but I don't have any idea of how to overcome this. All other features seem to work fine i.e. other events are available for viewing or further editing, all pictures seem available. Any ideas.
Thanks for any help.
Mike Hanrahan

Terence,
Thanks for the help, I created a new library as you suggested and successfully uploaded photos with no problem. So far so good. When I first started using iPhoto when the computer was new, the library was located on my hard drive in the pictures folder. Some time later I added two additional external drives or I guess the term is volumes. Drive 1 is for the time machine automatic backups and Drive 2 was added later and is dedicated for my iphoto library exclusively. At the time I added Drive 2 I moved (or maybe it was copying I'm not sure) all my photos from the internal drive to the external Disc2. So now I have three photo libraries.
1) The original library on the internal HD with my early photos
MacHD/Home/MP Navigator EX/Pictures/IPhoto Library
where the 'MP Navigator EX' came from I have no idea
2) Disc 2 library with all photos and which is apparently associated with the import problem.
Disc2/Pictures/IPhoto Library
3) The newly created library on the internal HD
MacHD/Home/Pictures/iPhoto Library
So when I followed your option 1, rebuilding the iPhoto Library Database , the computer just rebuilt library 3 above - the one just created with a few test pictures.
I now have three questions:
1) How do I direct/select the rebuilding of library 2 above? ( I assume that is what I should do)
2) Once this problem is fixed, how do I tell iPhoto upon launch which Library to use?
3) Once the drive2 library is rebuilt, is the rebuilding process one that generates any new
libraries or other files that I need to be concerned about?
With your additional help, I think my problem will be resolved.
Thanks so much.
Mike

Syncing process does not complete

I have 2 iphone 5S models that go through the entire sync process but the sync does not complete. Gets to the last step, "waiting for changes to be applied" and then the sync stops.

What step would that be - for photo transfer?

WORKFLOW PROCESS IS NOT WAITING FOR USER INPUT LIKE RE-ASSIGN FUNCTION

I am using Stand alone Workflow 2.6, In my workflow process
which is an Issue tracking system which is working fine. On Enhancement I would like to create my own RE-ASSIGN function which will, Change the ownership of an issue totally to other user.
For this I Created a package(CHANGE_OWNER.CREATE)which will show list of Users and Comment field(Just like Re-Assign).
Here user can pick other user, and add comment,
once submit for that Item key I am updating the workflow notification table so that paritcular issue ownership will be changed.
In my workflow process I created a lookup code called "Change Owner". On click of Change Owner it will call the Function
in workflow process which will call CHANGE_OWNER.CREATE, here
the workflow process supposed to wait and get the User to be
changed. BUT THE PROCESS IS NOT WAITING, IT JUST DISPLAYED THE
SCREEN AND CONTINUED THE WORKFLOW PROCESS. I WANT THE MY
WORKFLOW PROCESS TO BE ACT AS RE-ASSINGN BUTTON WHICH WILL WAIT
FOR THE USER INPUT.
HOW TO DO IT.
Thanks
Bala.

Hi Bala
What enhancements were you adding to the Workflow Reassign/Delegate feature, which included being able to add comments? A good idea is to look for any differences between how workflow implements the reassign feature, and your customization.
Also, make sure you only use the Public documented PL/SQL APIs and do not update the tables directly to ensure no Support or Upgrade Issues.
Cheers
Mark
I am using Stand alone Workflow 2.6, In my workflow process
which is an Issue tracking system which is working fine. On Enhancement I would like to create my own RE-ASSIGN function which will, Change the ownership of an issue totally to other user.
For this I Created a package(CHANGE_OWNER.CREATE)which will show list of Users and Comment field(Just like Re-Assign).
Here user can pick other user, and add comment,
once submit for that Item key I am updating the workflow notification table so that paritcular issue ownership will be changed.
In my workflow process I created a lookup code called "Change Owner". On click of Change Owner it will call the Function
in workflow process which will call CHANGE_OWNER.CREATE, here
the workflow process supposed to wait and get the User to be
changed. BUT THE PROCESS IS NOT WAITING, IT JUST DISPLAYED THE
SCREEN AND CONTINUED THE WORKFLOW PROCESS. I WANT THE MY
WORKFLOW PROCESS TO BE ACT AS RE-ASSINGN BUTTON WHICH WILL WAIT
FOR THE USER INPUT.
HOW TO DO IT.
Thanks
Bala.

Gr process is not completing for since 2006 while running batch job.

Similar Messages

Maybe you are looking for