GR Processing Time and Delivery Time not coming in CS11 Output screen

Hi,
I am executing a BOM explosion report using CS11.
In the CS11 report output I added columns for GR Time and Delivery Time using change layout option.
After changing layout when I see the details in columns of GR Time and Delivery Time all the values are ZERO '0' for all the components in BOM.
I checked the material master for component items and find that in MRP view values are maintained in GR Time and Planned Delivery Time field which are also seen in MARC table.
I do not know from where CS11 is fetching the values for display of GR Time and Del. Time.
How can we populate the values in CS11 report out put for GR Time and Delivery Time? Am I missing some master data maintenance apart from Material Master?
Regards...

Hi Prasobh,
I looked at the note 101262 and it seems that it is suggesting us to create a new Z report by copying existing report and then modify the WRITE Bloack in new report to display GR Time and Del. Time.
Is my understanding correct? If yes can you share with me the steps in some more details then mentioned in note 101262 that I need to follow for addressing this requirement.
If no can you suggest any solution that you know by which it is possible to include GR Time and Del. Time in CS11 output without Z development.
Regards,

Similar Messages

  • Hi - I cannot upload my emails through the mail icon.  The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email.  I use hotmail, and have had no problems with my iPhone or iPad.

    Hi - I cannot upload my emails through the mail icon.  The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email.  I use hotmail, and have had no problems with my iPhone or iPad.  So the only way I can check my emails on my mac is to go through the internet.  Can anyone help?

    Hello, do you mean Download?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.

  • Cisco LMS 4.0 Graph some time not coming

    I have installed cisco lms 4.0.
    I have added 10 devices, previously it was working fine, Since last few days some time syslog and graph are not coming. after every reboot on server it started working. It is happening on daily.plz help me out with permanent solution
    and also i have added manualy one device 7609-s router but not able to see cisco view
    Error:-
    Cannot find applicable device package for 10.133.224.131.
    This error could be due to one of the following:
    - The device package for this device type is not installed.
    - Device support for this device type is not available.
    - You are trying to open a component inside a device.
    To correct the problem, either install a device package for the device type, or open the parent device to manage the component.
    In device attribute it is showing 868 integrated router, I had try to delete and add again but problem is still same...
    Windows 2008 r2 standard
    RAM-16 Gb, Swap memory 8096

    Evrything looks good. Are you able to access LMS in the server itself? Try to install another browser on your server and try to login.
    Try both :
    http://x.x.x.x:1741
    https://x.x.x.x:443
    Share NMSROOT/MDC/tomcat/logs/stdout.log and stderr.log.
    -Thanks

  • My sim is stuck in simtray and simtray is not coming out.What should i do?

    My sim is stuck in sim tray and it is not coming out.What should i do?

    There are instructions on this page for getting the sim tray out : http://support.apple.com/kb/HT4577 . Does that not work ?

  • Moved to Europa and emails and iMessages are not coming

    Hello,
    I moved to the nordic part of Europa and the emails and iMessages re not coming.
    What can I Do? I was living in Central America.
    Regards,
    Jonathan

    If you mean that you are not getting notified when a text comes in, go to Settings> Notification Center> Messages.

  • HT2357 I accidently deleted all of my updates and they're not coming back. Is there any quick way to get these updates active again?

    I accidentally deleted all of my updates and they're not coming back. I haven't been able to make any updates since 2006. I have a log of my past updates but I cannot seem to get them active again. Is there any easy way to get these updates active again?
    This was a while ago back in 2006 but from what I can remember I actually deleted/permanently removed these updates from my list of updates. I tried keeping all the updates except for two that I did not need and somehow deleted all of the updates I wanted to keep. I've tried reseting my ignored updates but that does not bring back the updates. If i delete the two that I originally attempted to remove - it only brings those two back. I hope there is still some way to get these updates back. I appreciate any help that anyone is able to give me.
    Thanks!
    Plum<3

    10.4.11 is the latest version of 10.4.
    The security updates for 10.4 are listed here:
    http://support.apple.com/kb/HT5165
    If you are interested in updating to 10.5, see this tip.

  • Pls i tried to update my iphone, but the itones can restore my iphone and now its not coming up again

    Pls i tried to update my iphone, but the itones can restore my iphone and now its not coming up again, it can restore and its just displaying itunes logo and USB cable, pls i need your assistance and advice.

    Hello Richyfromnig,
    Thanks for using Apple Support Communities.
    The iTunes logo on the phone means that it is in what's called recovery mode.  Take a look at this article to find out more about recovery mode, and how to fix it:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Take care,
    Alex H.

  • HT4910 I just upgraded to 4s and when i backup my iCloud my apps and pics are not coming over?

    I just upgraded to 4s and when i backup my iCloud my apps and pics are not coming over?

    I'm assuming you have performed a restore from an icloud backup...
    Many users have lost photos while preforming a restore from backup or upgrading the iOS.   Recall, only photos in the camera roll are backed up to iCloud.  There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
    See:
    Settings>icloud>Storage & Backups>Manage Storage,  tap the device's name and on the next screen, be sure Camera Roll is turned on.
    IMPORTANT...
    Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream.  If you have been doing that, then you can sync those photos back to your device.
    If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered.  I'm afraid I have no advice in this case - there is no "cure".
    As for apps, you could always download them again from the itunes store, without charge.  Look for the link to purchased apps, there you'll have a list of the ones you can download free.

  • Delimited Org Unit(having end date Current date) are not coming in Bex output.

    HI All ,
    I have problem with BEx query output while using the Org. Unit Time dependent Hierarchy structure. In ECC side some of the Org. Unit nodes were delimited or their end date set to less than current date. Now this hierarchy is loaded to BW on daily basis those Org. Unit also laoded to BW hierarchy and these nodesare not coming up in our query output. Client wants to see these unit data as it important to him.
    Please suggest  .
    Thanks,
    Arvind Venai

    Hi Arvind,
    As per my understanding, the valid to/end date for Hierarchy should be 31.12.9999. May I know what is Valid To in your case?
    Did yo u check the change happend in ECC for hierarchy is reflecting in BW ?
    There mught be some restriction in BEx Query , please check

  • My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

    My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

    - If you did not charge the iPod for a couple of hours before you did the reset then charege and reset:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then connect to your computer and if iTunes sees the iPod restore via iTunes. 
    - Next see if recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Last, make an appointment at the Genius Bar of an Apple store.

  • MBP will not start up. was working fine and shut down and put to charge and now will not power back up. Screen will light up and then power shuts back down. Any thoughts?

    MBp will not start up. Was woking fine and shut down and put to charge and now will not power back up. Screen will light up but then powers shuts back down. Any thoughts???

    Follow these documents.
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/TS1440
    http://support.apple.com/kb/HT1455
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/HT1379
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT1509

  • I updated my Iphone 5 to iOS7 but during setup when i agree to 'Terms and Conditions', its not going to any other screen, it seems as if its going in some infinite loop. Please assist what to do in that case ?

    I updated my Iphone 5 to iOS7 but during setup when i agree to 'Terms and Conditions', its not going to any other screen, it seems as if its going in some infinite loop. Please assist what to do in that case ?

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • HT4623 Is their any other iPhone owners that dislikes the screens, fonts, display varieties this last update provided ? I know at least ten of my friends and family do not like the new fonts, screens it downloaded with the update. Is there away to change

    Is their any other iPhone owners that dislikes the screens, fonts, display varieties this last update provided ? I know at least ten of my friends and family do not like the new fonts, screens it downloaded with the update. Is there away to change these ?

    Is their any other iPhone owners that dislikes the screens, fonts, display varieties this last update provided ? I know at least ten of my friends and family do not like the new fonts, screens it downloaded with the update. Is there away to change these ?

  • RE: GR Processing Time not showing in MD04 and Exception List

    Hi,
    Just a quick question on GR Processing Time.
    A sales order has been raised and delievery day is for lets say 05/04/2010. MRP runs and it creates a planned order to be finished on the 05/04/2010 but it should finish on 04/04/2010 and as I have a GR time for 1 days.
    All data is correct but it doesn't seem to give an exception message saying reschedule in for the 04/04/2010 based on the GR Lead time build in material master.
    Regards
    Adeel Sarwar

    Dear ,
    Please note that while you are Carrying out MRP in MD02 you might have selected scheduling indicator -2  which triggered Lead times Scheduling based on the sales Order Delievery date , Scheduling Margin Key Timings , GR Processing Time  with an infinite capacity (MRP system does not carry out any Capacity Avalibility check where as does it does Scheduling for Planned Order  considering infitinte capacity in WCs) .As the system calcualtes the Planned order Deleivery date based on those parametrs  with in the planning and re-scheduling horzon , so result is not exceptional from MRP scheduling ponit of view .
    Now if you re-schedule the order as per your delivery requirement date , you will get the exeception messgae as applicable in MD04.
    Otherwise , please check in SPRO-Material Requirement Planning ---Evalution -Exception Msg -Select Key  U1-MSG 10-Double click on that -Check wether the "No Exception Msg " is ticked .Remove the same .
    Regards
    JH

  • GR processing time not taken into account for exception message in MD04

    Hello Gurus!
    In MD04 when we toggle between displaying at GR date and AV date sometimes there is a shortage in AV date view but none in GR date view due to GR processing time.
    How can we include the GR processing time to be taken into account so that an exception message is shown for the shortage during AV view?
    Thanks in advance!
       -Alvin

    Hi There
    What you meant by shortage,,,
    AV- Available date,
    GR- Availble date+GR processing time
    if you have not set up the GR processing time in Master, it may come as ZERO days,, so AV and GR date may be same,,
    if this is not your quesry, please provide more details on your query,,,
    Thanks
    Senthil

Maybe you are looking for

  • Printing Long text in Send Mail Task

    Hi All, My requirement is to print the long text of particular error message in the send mail task, which will be sent to outlook. for this i have an activity beforr the mail task, where i have filled the multiline parameter called 'TEXT' and this is

  • New ichat effects not working in photo booth?

    I recently just downloaded the iChat Effects 2.0.4 for my new MBP and it works fine in ichat. But, when i try and take a picture using one of the effects in photo booth it comes out pink and white. does anyone know how to fix it??

  • Sync with Entourage 2004

    I am trying to sync my BB Bold with Entourage 2004. First I used pocketmac which was just about useless as it would either not complete the sync or make duplicate entries in both calendar and contacts. I have tried Missing Sync and while the sync alw

  • Error: HTTP method GET is not supported by this URL

    Hey, I am attempting to overload the doGet method with a Wrapper class I created for HttpServletReponse that extends it of course and I receive this error: "HTTP method GET is not supported by this URL". I figure you can't change the method as I have

  • Import Configuration error

    Hello I have created a new software component, product as well. Created a new development track for the same. Addedd all the needed dependencies as well. However when i try importing the same into NWDS via import configuration I get the following err