GR Qty value does not equal the value

Hi,
In PO,there have been 4 GRs where the Qty does not equal the Value. How has this happened?
Could you please suggest me why the difference has come.
Thanks in advance,
Cheers,
Veena

Hi,
Yes.you are right.My suggestion does not work here.
Mr.Adam has given the perfect solution.
But the problem is the limitations on availability to
define Before aggregation as the aggregation property
for CKF,even in Version older than 7.
So try to implement the solution given by Mr.Adam with
reference to version7 in your query even though your
version is less than version 7.
With rgds,
Anil Kumar Sharma .P

Similar Messages

In a purchase order for 3 GR's Quantity does not equal the value

Hi,
I have found the difference in one purchase order, there have been 3 GRs where the Qty does not equal the Value. How has this happened?
Any guesses why the difference has come.
Thanks&regards,
Veena

Hi Vishal,
In po history for agt 3 Gr's Quantity does not equal the values. I hope the difference is Movement types. But exactly where to check this movements i am not getting.
Can you tell me this which T.code.
Tx,

Data form input value does not equal spread value

***Edit on this.
Hyperion Planning 9.3.1.2, we are testing out a new application and data form. The data form has the users enter in at the year total level and then spreads out the 12 months upon save.
If I enter in 100 then save or toggle off then back on the cell, the data form shows as 99.999999999 both on the form and in Essbase via export.
Our form has the decimals set to a Max of 2 for currency, non-currency and percentage
Are their any rounding issues in 9.3.1 with using the spread technique?
Curious to find if others are have or have experienced this problem
JTS
Edited by: jts on Dec 10, 2009 11:28 AM

Still not getting the warm fuzzy. Oracle indicates that this is a Java issue and not a Hyperion issue. It is how Java handles numeric values.
I indicated that it is a view issue and I need a fix.
I got Bug 8540616 for this but now I am trying to find the eta on this
JTS

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

The report does not accept the value for apps.fnd_profile.value('USER_ID')

Hi,
I followed the below note and added a report to my SSHR menu.
How To Add A Report To A 11i Self Service Menu [ID 334847.1]
In my report , I have a condition in the query
and a.created_by =apps.fnd_profile.value('USER_ID')
When the report is submitted as a request , it works fine., however the same report when called from the self service page does not accept any value for apps.fnd_profile.value('USER_ID') .
Is there a workaround to handle this problem.
regards

hi,
I had already tried the option apps.fnd_global.USER_ID too.
However it does not accept the value for apps.fnd_global.USER_ID.
We want to call the reports in SSHR using oaf and at the same time the records that are pending for approval created by the employee should only be visible.
regards
Maya

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

LOV does not return the value (2)

PPR in general does not work correctly if invalid HTML is generated. One example of an invalid HTML is having an opening <TD> tag immediately following another opening <TD> tag.
After checking everything else, if LOV still does not return the value, test whether it's not a problem with the invalid HTML by placing the messageLovInput outside of the complicated layout nestings you may have. If it works outside of the layout nestings, look for the possible problems in the layout nestings.

Hi RamKumar,
Thanks for your reply.. I have already done that but no luck :(
Regards,
Hemanth J

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

DI: Stock Transfer error (Unique field value does not match the system ...)

Hi
I made an add-on that makes stock transfers via DI API. The add-on has been running for two months with more than 10,000 stock transfers with almost no problems.
The company that is using the add-on have all their products managed by serial/batch numbers.
But just with one transfer Im getting the error in the stock transfer Add() method:
"Unique field value does not match the system serial number [(----)29-52]"
And I tried to debug it without success, I checked that the system serial numbers exists in the origin warehouse and are available. And I really can't find where is the problem.
If somebody knows what this error means, please let me know.
Thanks in advance,
Regards,
Allan

Hi János, thanks for your answer.
I found what was the problem, it was not exactly what you told me, but you gave me some insights to found the problem.
The thing is that Im using UDT's to store the information of stock transfers (before creating a real SAP stock transfer), because of the funcionality of the add-on. After some user have done some steps or validations, the add-on actually does the real SAP stock transfer.
The problem here was that my tables had some InternalSerial for some Item, for example the serial A-234, and before the real SAP stock transfer was made, they changed the serial from A-234 to A234 (in the serial number management). So the add-on was trying to create the transfer with the serial A-234, but the serial A-234 no longer exists.
I have to create a validation that if they change the serial number for an item, I have to change it in my UDT's.
On the other hand, Im not sure, but I think that I read before that you made a Warehouse Management add-on. This add-on that Im working now is a kind of warehouse management.
Im having a lot of headaches because the poor accessibility to the user fields in the OSRI and OIBT tables. Im sure that you have faced problems with this. If you have any tips or advices about this it would be greatly appreciated.
Thanks again,
Regards
Allan

Imqobjmgr does not recognize the value of java.naming.provider.url property

On Windows, I am running imqobjmgr 4.3
when I run imqobjmgr -i list.properties, I am getting the following error
Error [A3052]: imqobjmgr does not recognize the value of java.naming.provider.url property.
Why is that?
classpath
C:\Sun\SDK\imq\lib\jms.jar;C:\Sun\SDK\imq\lib\imq.jar;C:\Sun\SDK\imq\lib\fsconte
xt.jar;.
contents of list.properties
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
# Copyright 2000-2008 Sun Microsystems, Inc. All rights reserved.
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License ("CDDL") (collectively, the "License"). You may
# not use this file except in compliance with the License. You can obtain
# a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
# or mq/legal/LICENSE.txt. See the License for the specific language
# governing permissions and limitations under the License.
# When distributing the software, include this License Header Notice in each
# file and include the License file at mq/legal/LICENSE.txt. Sun designates
# this particular file as subject to the "Classpath" exception as provided by
# Sun in the GPL Version 2 section of the License file that accompanied this
# code. If applicable, add the following below the License Header, with the
# fields enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyrighted [year] [name of copyright owner]"
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright holder.
# @(#)list.properties 1.11 07/02/07
# This property file will list administered objects
# Version of command file
# NOTE: This is not the version of the Sun Java(tm) System Message Queue product
version=2.0
cmdtype=list
# If you want to only list a particular type of administered
# object, uncomment the following line and specify the type.
# Acceptable values for the type property are: t, q, tf, and qf,
# where t = topic, q = queue, tf = topic connection factory, and
# qf = queue connection factory.
#obj.type=
# To use the LDAP service provider implementation from
# Sun Microsystems, uncomment the following two property lines
# and set the url property correctly.
objstore.attrs.java.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory
objstore.attrs.java.naming.provider.url=ldap://localhost:389/ou=imqobjmgr,o=sun.com
# To use the File System service provider implementation from
# Sun Microsystems on Solaris, uncomment the following two
# property lines and set the url property correctly.
# *** Note that the url syntax here is platform specific. ***
#objstore.attrs.java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
#objstore.attrs.java.naming.provider.url=file:///home/foo/imq_admin_objects
# To use the File System service provider implementation from
# Sun Microsystems on Windows, uncomment the following two
# property lines and set the url property correctly.
# *** Note that the url syntax here is platform specific. ***
#objstore.attrs.java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
#objstore.attrs.java.naming.provider.url=file:///C:/imq_admin_objects
#objstore.attrs.java.naming.security.authentication=
#objstore.attrs.java.naming.security.principal=
#objstore.attrs.java.naming.security.credentials=

I see you're using Sun Java System Message Queue. There's a forum specific to that product over at [http://forums.sun.com/forum.jspa?forumID=711&start=0|http://forums.sun.com/forum.jspa?forumID=711&start=0] . You could try asking there.
Nigel

Argument error; the number of columns does not equal the number of parameters.

I am using the Database Toolkit (Enterprise Connectivity) to check for a network connection and then send information from a local database to a SQL database on the network if needed. In development of the code I continue to receive Error 1 and the Possible Reason(s) is "Argument error; the number of columns does not equal the number of parameters." I am using the DBToolsSelectData.VI to retrieve data from the local MDB file and the DBToolsInsertData.VI to write it to the SQL file. The collection of the data from the MDB file is successful and the connection and validation of the table and columns in the SQL file is also successful. The error occurs when the Insert VI tries to build the query. The number of columns being written (attempted) does match the number of columns in the data, they are both 16 string arrays.

Ok, it's taken a bit, and I have a solution! It took a while to figure out what the DCT is doing, but it seems to be working now.
The reason for the original error is that you were passing into the insert subVI an array of variants - which the input to the VI coerced into a single variant. You were getting the error because as far as the insert VI was concerned you were only passing it a single data value. The way to get around that was to create a cluster with one element for each column value, convert the cluster to a variant and pass the result to the insert VI - see attachment.
In terms of the other modifications, I made a copy of the endurance.mdb file, emptied it and used it as the destination for the copy.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
NetworkCheck.vi ‏49 KB

Why resource cost in Oracle does not equal the total on the routing of Usage.

why resource cost in Oracle does not equal the total on the routing of Usage.

Hi Judy,
I could not reproduce your issue. Is your Project Server patched with the latest SP and CU?
Also can you reproduce this unexpected behavior with another project?
Can you split your screen from the resource usage view, display the resource form and click right on the grey part selecting "schedule"? Then you'll have the scheduled start and finish dates for the resource's assignments. This is to be sure that
you are not missing any parts of the assignments due to a wrong zoom in the timephased grid.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Datetime value does not match the specified format

Hi All,
I am writing this function for a template
case when "Employment Events (Current)"."Most Recent Hire Date" is NULL then NULL else CAST(TIMESTAMPDIFF(SQL_TSI_YEAR,cast(cast("Employment Events (Current)"."Most Recent Hire Date" as char)as timestamp),Cast(Cast(@{EndDate}{CAST('2011-01-01' AS DATE)} AS CHAR) AS TIMESTAMP)) AS CHAR)||' year(s) ' end
but when it runs, it throws me this error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046] Datetime value 2011-01-01 does not match the specified format. (HY000)
What am I doing wrong? "Employment Events (Current)"."Most Recent Hire Date" is set to max - aggregation in the rpd.

I found the solution as well.
The ODBC driver on the Windows server was old (Version 6). I upgraded that to SQL Server Native Client 11.0 and everything works fine.

Personalising variable values does not have the effect

Hello ,
When the variable is personalised with a value and executed the query for the second time the variable does not have the personalised values again and it waits to enter the input!
What is the reason behind this and are there any other settings to be done before personalising the variable value?
Thanks in advance!
Ram

Hi BW,
This is problem with one query or for all queries.
you first have to activate the personalization in the BW backend system (via transaction RS_PERS_ACTIVATE or via Customizing path BW Customizing Implementation Guide -> Business Information Warehouse -> Reporting-Relevant Settings -> General Reporting Settings -> Activate Personalization in BEx
And also check <a href="https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1056690&nlang=EN&smpsrv=https%3a%2f%2fwebsmp110%2esap-ag%2ede">Note 1056690 - Query Designer: Variable personalization is deleted</a>
Hope it Helps
Srini

Total Baseline Hours For A Resource Does Not Equal the Sum of the Weekly Baseline Hours for that Resource

Hi,
I am using Project Server 2010. I have a project schedule that has been baselined and no actual work has been charged to it. The project has 3 resources. I am in the Resource Usage View. With 2 of the three resources, the hours in the Baseline Work Column
on the left side of the view do not equal the sum total of weekly hours in the Timephased Grid. For instance, for resource JB the Baseline Work hours column says 1,392. When I total his weekly hours in the timephased grid I get 1368 hours; a variance
of 24. Resource RS has 794.5 hours in the Baseline Work column but the sum total of his weekly timephased grid hours is 710.5, a variance of 84 hours. In both cases, the sum of the hours in the timephased grid is less than the hours in the Baseline Work column.
What would be causing this? (I am cutting and pasting the weekly hours in the timephased grid into Excel and using the Excel sum function total). Is there a better timephased view I should be looking at to try to find the "missing
hours"? I have seen this before in project and it really has me stumped. Thanks.
Judy Washington

Hi Judy,
I could not reproduce your issue. Is your Project Server patched with the latest SP and CU?
Also can you reproduce this unexpected behavior with another project?
Can you split your screen from the resource usage view, display the resource form and click right on the grey part selecting "schedule"? Then you'll have the scheduled start and finish dates for the resource's assignments. This is to be sure that
you are not missing any parts of the assignments due to a wrong zoom in the timephased grid.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

GR Qty value does not equal the value

Similar Messages

Maybe you are looking for