GR reduction impossible. Wrong CI with FT 30 instead of 40 in GR/IR acct.

Hi Gurus
I want to clear my GR/IR G/L account using transaction code MR11 for a Service Order, and I'm getting error message' FMUP009 - GR reduction impossible. Wrong CI with FT 30 instead of 40 in GR/IR acct".
1. The FT of my GR/IR commitment item master record is currently set to 50 NOT to 30 as mentioned in the error message.
2. If I change the FT of my GR/IR commitment item to 40 (the correct setting), I still get the same error message as above.
Note: The offsetting commitment item's master record is set to a 30 (the normal setting for and expenditure commitment item).
Question: Could this be a program error?
Regards
Thuso Mudau

Hello Thuso,
The symptom you describe might be solved by these notes
1027015     MR11 incorrectly updates Funds Management (FM) ->
                This note is currently being  checked and should be released shortly
1069481     Unjustified FM error message when posting an invoice receipt
So, please wait a little bit to have note 1027015 and make sure that both are installed in your system
Kind regards,
Mar

Similar Messages

  • MR11 Error -  GR reduction impossible. Wrong CI with FT 30 instead of 40

    Hi,
    We are on ECC 6.0 and have implemented Funds Management. When we try to post G/R Reduction in MR11 we are getting the error below:
    GR reduction impossible. Wrong CI with FT 30 instead of 40 in GR/IR acct.
    We checked the config in FMDERIVE and everything looks fine.
    Any help on this issue will be appreciated !
    Regards
    Bhooma

    The issue was fixed by applying SAP Note 1069481.

  • The UI text of the menus are not readable so it's impossible to work with

    Hi
     I install the photoshop cs6(x64) and i have the following problem. The UI text of the menus(not the toolbar drop down menus) are not readable so it's impossible to work with. After that, I completely uninstall the cs6 photoshop and i tried to install photoshop cc(x64)-with clean install- but the problem still exist.
    Also I tried to change display settings from 1600x900(recommened)but the problem still exist...I send you some photos of the menus to understand better what I mean.Any suggestions? Specifications
    Toshiba Satellite L775-15NWin 7 Home Premium SP1 x64
    Intel Core i5-2430M 2.4GHz
    Ram 8gb
    Monitor 17"
    Geforce GT 525M

    Right click on your desktop and choose Properties, then choose Window Color, Advanced Appearance settings...
    Click on the Message Text to look at your Message Box item settings.  Is the font Segoe UI, 9 point, color black?
    Also, in Photoshop, check your Edit - Preferences - Interface menu.  What is your UI Font Size there?  Try changing it to something else, closing and restarting Photoshop, then changing it back.
    Lastly, you could try resetting your Photoshop preferences to defaults.  Press and hold Command - Shift - Option simultaneously (or Control - Shift - Alt if on a PC) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
    -Noel

  • Ipad2: with iOS7 it's quite impossible to type with virtual keyboard (very long time before screening letters).

    Ipad2: with iOS7 it's quite impossible to type with virtual keyboard (very long time before screening letters).

    I have found a workaround in this bug report.
    Make a script in /usr/lib/systemd/system-sleep/keyboard.sh
    #!/bin/sh
    case $1/$2 in
    post/*)
    echo -n rescan > /sys/devices/platform/i8042/serio1/drvctl
    esac
    Do not forget to make it executable:
    chmod a+x /usr/lib/systemd/system-sleep/keyboard.sh

  • Why do you make it almost impossible to communicate with you? Why do new customers I have to pay half the price I am paying since years? How can I change from cloud complete to just photoshop?

    Why do you make it almost impossible to communicate with you?
    Why do new customers have to pay half the price I am paying since years?
    How can I change from cloud complete to just photoshop?
    [email protected]

    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
    Creative Cloud pricing and membership plans | Adobe Creative Cloud
    Manage your membership and payments | Creative Cloud
    https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html

  • Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc

    Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Client wanted  to delete the document created with the wrong GL with the WB

    Dear All,
    The user had by mistake posted the the document in a wrong GL with with WBS element under the Project.
    We have tried to reverse it through a reversal posting. But it could not be done.
    Client wanted  to delete the document created with the wrong GL with the WBS element.
    How this can be set right?
    Please advice.
    Regards
    Bijudas

    document cannot be deleted in SAP
    reverse the document and then report

  • Client wanted to delete the document created with the wrong GL with the WBS

    Dear All,
    The user had by mistake posted the the document in a wrong GL with with WBS element under the Project.
    We have tried to reverse it through a reversal posting. But it could not be done.
    Client wanted to delete the document created with the wrong GL with the WBS element.
    How this can be set right?
    Please advice.
    Regards

    document cannot be deleted in SAP
    reverse the document and then report

  • I run a Mac Mini 10.6.1 and a G5 10.4.11 - they share a screen. Yesterday the contrast on the Mac Mini went mad. Very very heavy contrast and now its impossible to retouch with Photoshop as I cannon judge the colours accuratly. The G5 is fine. John UK

    I run a Mac Mini 10.6.1 and a G5 10.4.11 - they share a screen. Yesterday the contrast on the Mac Mini went mad. Very very heavy contrast and now its impossible to retouch with Photoshop as I cannot judge the colours accuratly. The G5 is fine. I keep the screen image I get on the G5 good and accurate with Huey. I believe I cannot use this with the "Intel Inside" Mac Mini. Does anyone know how I can restore the great screen image I got up to yesterday on my Mac Mini? Thanks. John Suffolk England.

    Likely caused by one of the following: a bad cable, maybe a bad connection or (my guess) bad graphics hardware.
    To rule out the software, see if booting from an installer DVD shows better color.
    Swap the cables and check the connections.
    Then call your hardware support provider.

  • Used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter

    used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter.
    Can anyone help ?
    please?

    WHow long have you left it to charge?  Have you tried resetting it after a short period of time to see if that can help jumpstart the charging process? To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Got started on wrong foot with Revel

    I got started on the wrong foot with Revel. I thought I was logging into my old Photoshop account so I ended up creating a new Revel account with and old email address and password that I don't want to use. I then uploaded about 2000 pictures. Not realizing that in "Track" view the pictures scroll left to right I couldn't see all my pictures so I uploaded them again thinking that they didn't upload. I now have over 4000 pictures, half of them doubles. How do I fix this? Am I better off asking for the account to be deleted and start over? I have Elements 10. Does Revel work with Elements 12? Am I better off purchasing Elements 12 and working through it?
    Dan

    Hi Dan
    You can login with your current email address at:
    https://www.adobe.com/account/account-information.html
    and  make changes to your profile here, change email address, password, screen name, etc.
    Mobile albums are albums that show in elements 12 but are also connected to the files in Revel. If you delete them or add more from one place, it does the same in the other. Here are som links you might like to see on elements/revel.
    I think what happened is that the photos from iphoto were a lower resolution than the others you uploaded, so they look the same but may be in fact different. The recommended way to upload from iphoto is listed below. Is this you you uploaded or did you drag and drop? You could export the two identical looking photos and check the sizes if you want to confirm this.
    Import to Revel from iPhoto:
    Open Adobe Revel on your Mac and click the + button.
    In the Import Photos dialog box, click Photos in the Media area of the list on the left. Select iPhoto, and then select the photos you want to import.
    Click Import To Library.
    Getting Started with Revel:
    http://www.adobe.com/support/revel/gettingstarted/revel_gs.html
    Revel Forum FAQ's:
    http://forums.adobe.com/community/revel/faq
    ELEMENTS 12
    http://helpx.adobe.com/photoshop-elements/using/whats-new.html
    http://helpx.adobe.com/pdf/elements-organizer_reference.pdf
    http://tv.adobe.com/show/learn-photoshop-elements-12/
    http://tv.adobe.com/watch/learn-photoshop-elements-12/setting-up-your-mobile-albums/
    http://helpx.adobe.com/photoshop-elements/topics/getting-started-tutorials.html
    http://tv.adobe.com/show/learn-photoshop-elements-12/
    http://helpx.adobe.com/pdf/photoshop-elements_reference.pdf
    http://helpx.adobe.com/photoshop-elements/topics/getting-started-tutorials.html

  • HT201250 Hi, I had updated folder on my hard drive wich was wrongly replaced with a folder from my external drive. I m not using time machine. How can i recover that updated folder? (it was done on 3-5-12)

    Hi, I had updated folder on my hard drive wich was wrongly replaced with a folder from my external drive. I m not using time machine. How can i recover that updated folder? (it was done on 3-5-12)

    If the folder was replaced, it was written over.
    Nothing short of forensic data recovery (probably involving taking the drive apart to scan the discs seperately) is going to recover anything (if indeed even that will).

  • Impossible to scan with à MP610 canon and a Airport express

    I print with à canon MP610 on a Airport express, but it is impossible to scan withit.
    help me .....

    Sorry, but Canon and other manufacturers have not provided full featured drivers to allow advanced functions when their devices are connected to the USB port on the AirPorts......which is how I assume that you are connecting.
    If you need advanced features like scan, copy, fax, maintenance etc., you will need to connect the All-in-One directly to your computer.
    You might want to contact Canon Support directly to ask them if they plan to offer full featured drivers in the future.

  • What wrong Apple with Adobe?

    Hi there,
    Inside my MACBOOK Pro 13" have Safari, Firefox, Google Chrome, Camino and Opera. I've upgraded my flash player after I get the notification from Adobe. But the poor thing is come to me, I can't even play any Facebook games from the browser except Safari but also very slower than before. I even can't direct post up my youtube video to my Facebook wall from Safari.
    Mostly, upgraded is as same as smooth-going, but it seems not, it is downgraded my system. May I know whats wrong Apple with Adobe? Could you please solve the problem?
    Thank you!
    MARX

    Bill if you are facing difficulties reinstalling Photoshop please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html. 
    There is no need to initiate the installation process for Photoshop CC from https://creative.adobe.com/ if you already have the Creative Cloud desktop application installed.

  • Endless beach Ball. Impossible to work with Motion.

    Impossible to work with Motion since I have my new Apple 23" Cinema display, I did the quick time stand alone thing, got rid of the .plist and just do not know where to go from there. Any suggestion would be appreciated

    At this stage, if the whole machine is slowing down I'd suspect a disk or memory problem.
    Try the following few things.
    1. Run the 'Disk Utility', select each volume in turn and click 'verify volume' for each one.
    2. Run the 'Disk Utility', select each volume in turn and click 'verify disk permissions' for each one.
    None of the above are destructive, ie they only check for problems, not fix them. Each has a counterpart 'Repiar Volume' and 'Repair permission' which do attempt to fix problems. Use with caution. They are normally very safe to use, and don't normally result in data loss, but I'd be a fool not to say "ensure you have a backup of anything you can't afford to lose."
    Finally, just in case something shook loose when you attached the new display, click the Apple menu, select 'About this Mac' and 'More info...' and check that the profile shown matches your expectations in terms of the amount of memory fitted etc etc.
    Of course, all of the above may be a little overkill if it's just some weird problem related to the new display, so before doing any of that, put the old display back on and see if the problem goes away.

Maybe you are looking for