GR related message for a PO in RZ20

Hi SRM Gurus
I am in the process of setting up SRM 5.0 Extended classic. For some reason, the display PO is not visible in ECC5.
I have checked RZ20 and the error message states 'PurchOrder x000000001: Indicator for GR used not allowed'
Please can someone explain this message as it appear to be why the PO is not hitting ECC5. The original cart was for a Service material.
Thanx
SW,

Please make sure that the Vendor Purchasing Data in ECC (XK02 / XK03) and SRM (BBPMAININT) are same. If there are any inconsistencies in these, you are bound to get such errors. You can update them using the program BBPUPDVD.
Regards
Kathirvel

Similar Messages

Error message for Leave request (Related to some Old Question)

Hi Experts, 
 
We are facing an Error when only 1 employee in the company opens his Leave request page, the same page is working for others perfectly. 
 
this Error is the same as the one in the below posts: 
 
1. Link: Re: Error message for Leave request 
 
and I tried going through their solutions such as: 
 
1. Please check if you have the leave config done on ECC side under Personnel Management --> Employee Self services --> Service Specific settings --> Working time --> Leave request . 
2. At the least you should have assign the default rule to your PSG to the standard leave type given. Otherwise create your own rule groups and Specify Processing processes for type of leave set up. 
3. explicitly activate WEBMO Feature although it was activated 
 
But the Error is still coming for this specific Employee, even though his Vacation Quota is created and available for deduction. 
 
Please Help me in solving this issue. 
 
Regards, 
Abdulrahman

Index: 0, Size: 0:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
 at java.util.ArrayList.RangeCheck(ArrayList.java:507)
 at java.util.ArrayList.get(ArrayList.java:324)
 at com.sap.aii.proxy.framework.core.JcoBaseList.get(JcoBaseList.java:268)
 at com.sap.aii.proxy.framework.core.AbstractList.get(AbstractList.java:230)
 at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCList.get(DynamicRFCList.java:281)
 at com.sap.tc.webdynpro.progmodel.context.Node$ModelElementList.getElement(Node.java:2549)
 at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
 at com.sap.tc.webdynpro.progmodel.context.Node.setLeadSelection(Node.java:753)
 at com.sap.xss.hr.lea.form.FcForm.setLeadSelectionForSubtype(FcForm.java:700)
 at com.sap.xss.hr.lea.form.FcForm.setVisibility(FcForm.java:943)
 at com.sap.xss.hr.lea.form.FcForm.prepareCommand(FcForm.java:308)
 at com.sap.xss.hr.lea.form.wdp.InternalFcForm.prepareCommand(InternalFcForm.java:2041)
 at com.sap.xss.hr.lea.form.FcFormInterface.prepareCommand(FcFormInterface.java:116)
 at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.prepareCommand(InternalFcFormInterface.java:1887)
 at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.prepareCommand(InternalFcFormInterface.java:1983)
 at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:299)
 at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:1084)
 at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
 at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:204)
 at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface$External.onInit(InternalVcFormEditInterface.java:280)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
 at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
 at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
 at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
 at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
 at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
 at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
 at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
 at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
 at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
 at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

How to show multiple messages for a single exception

hi
Please consider this example application created using JDeveloper 11.1.1.3.0
at http://www.consideringred.com/files/oracle/2010/MultipleMessagesExceptionApp-v0.01.zip
It has a class extending DCErrorHandlerImpl configured as ErrorHandlerClass in DataBindings.cpx .
Running the page and entering a value starting with "err" will result in an exception being thrown and multiple messages shown.
See the screencast at http://screencast.com/t/zOmEOzP4jmQ
To get multiple messages for a single exception the MyDCErrorHandler class is implemented like
public class MyDCErrorHandler
extends DCErrorHandlerImpl
public MyDCErrorHandler()
 super(true);
@Override
public void reportException(DCBindingContainer pDCBindingContainer,
 Exception pException)
 if (pException instanceof JboException)
 Throwable vCause = pException.getCause();
 if (vCause instanceof MyMultiMessageException)
 reportMyMultiMessageException(pDCBindingContainer,
 (MyMultiMessageException)vCause);
 return;
 super.reportException(pDCBindingContainer, pException);
public void reportMyMultiMessageException(DCBindingContainer pDCBindingContainer,
 MyMultiMessageException pException)
 String vMessage = pException.getMessage();
 reportException(pDCBindingContainer, new Exception(vMessage));
 List<String> vMessages = pException.getMessages();
 for (String vOneMessage : vMessages)
 reportException(pDCBindingContainer, new Exception(vOneMessage));
}I wonder if calling reportException() multiple times is really the way to go here?
question:
- (q1) What would be the preferred use of the DCErrorHandlerImpl API to show multiple messages for a single exception?
many thanks
Jan Vervecken

fyi
Looks like using MultipleMessagesExceptionApp-v0.01.zip in JDeveloper 11.1.1.2.0 (11.1.1.2.36.55.36) results in a different behaviour compared to when used in JDeveloper 11.1.1.3.0 (11.1.1.3.37.56.60)
see http://www.consideringred.com/files/oracle/img/2010/MultipleMessages-111130versus111120.png
When using JDeveloper 11.1.1.2.0 each exception seems to result in two messages where there is only one message (as intended/expected) per exception when using JDeveloper 11.1.1.3.0 .
(Could be somehow related to the question in forum thread "multiple callbacks to DCErrorHandlerImpl".)
But, question (q1) remains and is still about JDeveloper 11.1.1.3.0 .
regards
Jan

How to create a navigateable messages for SALV in FPM message area

We have some problems raising messages for errors in a ALV table. Messages reported by the ALV table itself (like a character entered in a number field) are displayed in the FPM message area and the message is mapped to the field causing the error (navigation link). When we try to raise an own message out of the application controller of our building block which carries the ALV, we didnu2019t manage to have the mapping between the error message and the ALV-field.
We already tried several versions of calling the message method (using the elements of the context of the calling application as well as the context of the mapped ALV compontent):
CALL METHOD wd_this->gr_msg_manager->report_t100_message
      EXPORTING
        iv_msgid              = '/ISDFPS/MSG_GAF_PE'
        iv_msgno              = '047'
        iv_parameter_1        = lv_par1
        iv_parameter_2        = lv_par2
        io_component          = lo_INTERFACECONTROLLER
        io_controller         = lo_api_interfacecontroller
        io_element            = lo_element
        IV_ATTRIBUTE_NAME     = lv_attribute
        iv_severity           = if_fpm_message_manager=>gc_severity_error
        iv_lifetime           = if_fpm_message_manager=>gc_life_visibility_automatic
        is_navigation_allowed = abap_true
        it_attributes         = lt_attributes.
Does anybody know a solution or maybe an example where a error message is linked to an field in the SALV and reported in the FPM message area using the above mentioned method call?
Thanks and best regards
Gerald
Edited by: Gerald Reinhard on Mar 31, 2009 10:56 AM

Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'. But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter.
I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'.   Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI. Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning. Is this warning occuring because of missing configuration?
Thanks - Mike

How to show a single error message for all fields

Hi
I have a JSF from containing around 10 controls(input, select etc.) .
Now I need to display an error message in case any of the mandatory control has validation error.
Message format would be like
"*Please,Complete the fields marked with yellow!"* The message I need to show in a div tag with Yelow background.
Currently, I am getting individual default error message in case validation fails and related field is bordered with Yellow.
My code is below.
*<h:panelGrid columns="3">*
*<h:outputText value="#{msgProv.bi_firstname}" />*
*<h:outputText>*
*<rich:spacer width="100px"></rich:spacer>*
*</h:outputText>*
*<h:panelGroup>*
*<h:inputText*
*value="#{brokerInformationFields.firstName}"*
*label="#{msgProv.bi_firstname}" id="firstName" required="true">*
*<f:validateLength maximum="10" minimum="2" />*
*<rich:ajaxValidator event="onblur" />*
*</h:inputText>*
*</h:panelGroup>*
*<h:outputText value="#{msgProv.bi_lastname}" />*
*<h:outputText>*
*<rich:spacer width="100px"></rich:spacer>*
*</h:outputText>*
*<h:panelGroup>*
*<h:inputText label="#{msgProv.bi_lastname}" id="lastName"*
*value="#{brokerInformationFields.lastName}" required="true">*
*<f:validateLength maximum="20" minimum="1"/>*
*<rich:ajaxValidator event="onblur" />*
*</h:inputText>*
*</h:panelGroup>*
*<h:commandLink action="#{brokerInformationActions.submit}">*
*<h:graphicImage value="/images/axa/btn_submit_from.png" style="border:0px;"/>*
*</h:commandLink>*
I am using (JSF1.2,Rich Faces 3.3.0,Facelets.)
And a Phase Listener from
http://balusc.blogspot.com/2007/12/set-focus-in-jsf.html
This Phase listener is to border the control with Yellow in case validation fail.
Now my Query
*1) How can I show a single message for all fields as I marked above in case of validation failure?*
*2) Now, the control is becoming yellow borderd when user clicks the submit button and validation fails.*
*User can move from one control to other using tab. That time proper validation message is appearing.*
*but the border of the control is not changing to yellow.*
*What's the correcion can be made to meet that requirement too.*
regards
Roy

Hi Nabheet,
Thanks for your response.
The FM returns the error messages if they are standard ones. For example, if the posting period is closed - the FM will not allow the Workflow to proceed further.
But in this case, I have a custom error - for a particular Profit center, Cost center and I/O fields are mandatory(not at time of parking, but should be filled before posting).
Since this is not a standard error, this FM will not stop workflow from proceeding further. How can I have the custom error captured in this FM?
Thanks.

How to send HTML mail with images multipart/related message

Hi,
Could any body tell me how to send HTML mail with images in "multipart/related" message,if any body can give the code ,it would be helpful.
Thanks

Hi,
Could any body tell me how to send HTML mail with
ith images in "multipart/related" message,if any body
can give the code ,it would be helpful.
ThanksHi!
Refer to
http://developer.java.sun.com/developer/onlineTraining/JavaMail/index.html
I've found it very helpful.
Look at the last part for a code showing how to send HTML mail!
Regards

Number of Messages for a Topic

Hi Jeff,
 I suggest that you open a case with Customer Support.
 Jane Sampson
 Developer Relations Engineer
 BEA Support
 "Jeff Carey" <[email protected]> wrote in message
 news:[email protected]...
 >
 > A startup class reads a Topic that contains e-mail messages from the
 applications
 > of our CRM system. Due to a bug in the startup class a suitable course of
 action
 > wasn't followed upon receipt of an mail Exception. That resulted in
 e-mail not
 > being sent and many messages backed-up.
 >
 > Because e-mail is a critical part of our CRM system, our requirements
 providers
 > want E-mail monitored. The problem is how to do that for a Topic.
 >
 > Responses from you and others indicate there isn't a good solution. If
 querying
 > the JMS tables is as good a solution as any, what status of a message
 associated
 > with the Topic would indicate a message not yet processed? A count of
 those that
 > exceeds a configured value could indicate a mail problem may exist.
 >
 > "Jane Sampson" <[email protected]> wrote:
 > >Hi Jeff,
 > >
 > >WebLogic uses internal implementation to collect this information. There
 > >is
 > >no method that I know of in the JMS API to allow this. Is there a
 > >particular reason that your application needs to do this?
 > >
 > >Jane Sampson
 > >Developer Relations Engineer
 > >BEA Support
 > >
 > >"Jeff Carey" <[email protected]> wrote in message
 > >news:[email protected]...
 > >>
 > >> How can an application learn the number of messages on a Topic?
 > >>
 > >> The WebLogic Console in JMS/Durable Subscribers/<subscriber> shows
 > >the
 > >number
 > >> of unprocessed messages for the Destination Topic.
 > >>
 > >> Review of documentation didn't reveal either a JMS or WebLogic method
 > >to
 > >get the
 > >> number of messages. Did the WebLogic console get the information by
 > >querying
 > >> the database table jmsmessage for messages for the destid associated
 > >with
 > >the
 > >> Topic and with a particular status? If so, what status?
 > >>
 > >> We are using WebLogic 5.1.
 > >>
 > >> Thank you.
 > >
 > >
 >

"Hide Related Messages" button shouldn't be grayed out

New iMac, OS X Lion, Mail 5.1, everything migrated over from older iMac running Snow Leopard
Getting used to the way Lion handles some things in Mail has been a challenge for one of my coworkers. But this one has me stumped.
Normally, when you select a message that is part of a Conversation, you can click on the "Hide Related Messages" button to look at just the message you have selected. But, for this person, the "Hide Related Messages" button is grayed out - even when a message that's part of a conversation with multiple messages is selected. They really want to be able to look at their messages one at a time without seeing every message tied to it as well.
Does anyone have any suggestions?

Anyone?

OSB to Bpel -- BEA-382612: Error preparing message for dispatch

I posted this in " SOA & Process Management", but later realized that it belongs here. so posting here again.
We have Soa Suite 11g and OSB 10.3.1 runinng on unix machine. I performed the following steps:
     1. Created Bpel service and deployed on soa server 11g
     2. Imported WSDL into osb 10.3
     3. Created BS service based on WSDL and used WSDL url of BPEL(http)
     4. Created proxy service and called BS
     5. I have only one step in proxy, just to log the incoming xml
When I run the proxy, I am receiving the following error and my log is not showing any message:
     BEA-382612: Error preparing message for dispatch
Question:
     1. I enabled logging and monitoring for my service, and still not seeing any log messages. How can I enable logging?
     2. Is anything missing during the installation to communicate between OSB and BEPL using http?

Hi,
1. I enabled logging and monitoring for my service, and still not seeing any log messages. How can I enable logging?Make sure that you have enabled Message Tracing. For logging related problem, please refer -
Re: "Log" action is not working in OSB10.3.1.0
2. Is anything missing during the installation to communicate between OSB and BEPL using http?I think problem is between Proxy Service and Business Service. Proxy service is not able to invoke Business Service. Open the test console of Business Service and check the format of input required. Proxy service must pass input to BS in the same format. Use Assign and Replace action in message flow of Proxy Service to format the request going to BS.
Pay special attention to the namespaces being used.
Regards,
Anuj

Javax.servlet.ServletException: Missing message for key

Hello
I have created an strut application.
When I deploy an application it is giving an exception
javax.servlet.ServletException: Missing message for key "inputForm.userName"
In struts-config.
<message-resources parameter="com.tatainfotech.sample.application"/>
The resource bundle file is put in WEB-INF\classes\com\tatainfotech\sample\application.properties
Content of application.properties
inputForm.userName=UserName
What is the problem ?
Thanks

Hi,
Please post this to an appropriate forum, This forum is exclusively related to creator.
regards
MJ

Integrated messaging for second line

My daughter set up integrated messaging on her phone for use with the web through my verizon online . We would like to do the same for my phone but do not see an option to set up my phone (an additional line on same account). Is this feature only for the primary account holder? If not, can someone instruct us how to set it up for my phone?

guitardeerrun wrote:
1. If you activate Integrated Messaging Service (IMS) for one phone on the plan, is it activated for all phones on the plan?
2. If not, how do you activate other phones on the plan? You need to have a login and password for EACH line on your shared family or share everything plan. Secondary lines will only see information related to their line of service, and the account owner can see call, text, and data details and manage all the lines (but they cannot see actual texts unless logged in under each separate line).
3. When you activate, does an automated Verizon message go to the phone announcing IMS, - or not. Not sure....I don't remember.
4. Where and when does the message push occur - on server to phone & web simultaneously - or does message go to phone first, then handshake back to server for the push to the web. This latter method then implies an app install on the phone which talks back to server saying now push out to the web.
The 'app-on-phone' is what I want to avoid, hence one of my questions is "Do you just accept terms and messages begin appearing on web, - or must you first install and activate app on the phone. I hope some of the Verizon knowledge people see, understand and reply.
I had the Messaging app on my phone initially, and on the tablet. I removed it from the phone as I was getting the texts twice (native texting and the app) and I preferred the native texting on the phone. Since my tablet is wifi only, I like being able to access messages and text with the tablet using my phone number.
I really haven't used the application on the computer, no need to, but when I do pull it up, all my messages are there.
I did activate it on my phone first, then the tablet. But I have since removed it from my phone - so you don't have to have it on the phone for it to work.
A couple of things I DON'T like about it:
It doesn't sync with my contacts list, so all I see are numbers of contacts who text me. I don't know everyone's numbers, so I have to read through a few messages to figure out who the thread is with, and I haven't figured a way to get names instead of numbers to display.
It also doesn't sync read and unread messages. My tablet has tons of unread messages, even though I have received and read the messages on my phone. Maybe because I don't have the app on my phone any longer? But it seems it was working that way before I removed it from the phone - the two did not "sync". Maybe I'll try putting it back on the phone to see if the sync happens....
In answer to @flapship - you need to set up a separate MyVerizon account for each line, then you can set up the Integrated Messaging for that line.

Mail's "Hide Related Messages" doesn't stick?

I recently upgraded to Mountain Lion and am now running into an issue that I haven't found any information on.
In Mail I often open up an email into a new window if I'll be referring to it often. With Mountain Lion it defaults this to the "Show Related Messages" view with that white message over the OSX grey background and all the related emails threaded below it. I don't want this. I go up to View -> "Hide Related Messages" and it goes away.... only to return when I restart Mail, restart my computer, log out/in, or even sometimes when I come back from screensaver or the dashboard. I can't for the life of me get this "Hide Related Messages" setting to stick.
Does anyone have any ideas?

Try Mail Preferences/Viewing/Include related messages (uncheck that box). I just upgraded to Mountain Lion and had roughly the same problem which I fixed this way. I prefer to have that as an icon on my toolbar, which you can add by going to the View menu, Customize toolbar, and drag the "show related messages" icon to the toolbar.

Related BAPIs for the Infotypes

Dear Friends ,
I have got an issue to post the following details to external system Can anyone please provide me the related BAPIs for the following Infotypes.
Infotype 02 - Personel details
Infotype 06 - Adress details
Infotype 09 - Bank details
Infotype 33 - Statistics
Infotype 21 - Family details
Infotype 08 - Basic Pay
Infotype 28 - Internal Medical Service
Infotype 22 - Education details
Regards,
Gopi.

Hi,
System can work even if target system not always online. The IDoc will be created and sendingcontinue once the system has coneected to other system
System can work that target system always online and active then only it interacts both system use bapi. It will be disadvantage of bapi
The tabe TBDBA stores the relavant message type, IDOC type, OUtbound function module,inbound module that are generated as part of the ALE BAPI interface for a particular Business object method
Edited by: sekharch on Jan 9, 2011 4:17 PM

11i Family Pack K RUP4 patch, FAILED messages for file perkigfclient.jar

Oracle E-Business Suite Release 11.5.10.2
Hi, All -
After running the 11i Family Pack K RUP4 patch, I got failed messages for file perkigfclient.jar and penzlhee.sql.
Both files do have a "Completed" message under another worker. Is this an issue? If yes, how should I fix it?
Thanks in advance!
================================================================================
Time is: Mon Aug 24 2009 15:25:23
FAILED: file perkigfclient.jar on worker 2 for product per username HR.
Time is: Mon Aug 24 2009 15:25:32
Deferred: file perkigfclient.jar on worker 2 for product per username HR.
Time is: Mon Aug 24 2009 15:25:32
(Deferment number 1 for this job)
Assigned: file perkigfclient.jar on worker 1 for product per username HR.
Time is: Mon Aug 24 2009 15:25:32
Completed: file perkigfclient.jar on worker 1 for product per username HR.
Time is: Mon Aug 24 2009 15:25:37
===============================================================================
Time is: Mon Aug 24 2009 15:36:43
FAILED: file penzlhee.sql on worker 3 for product per username HR.
Time is: Mon Aug 24 2009 15:36:43
Deferred: file penzlhee.sql on worker 3 for product per username HR.
Time is: Mon Aug 24 2009 15:36:44
(Deferment number 1 for this job)
Assigned: file penzlhee.sql on worker 2 for product per username HR.
Time is: Mon Aug 24 2009 15:36:44
Completed: file pspextef.sql on worker 8 for product psp username PSP.
Time is: Mon Aug 24 2009 15:36:44
Completed: file penzlhee.sql on worker 2 for product per username HR.
Time is: Mon Aug 24 2009 15:36:45

The "penzlhee.sql" error is related to deadlock. Since the file did completed, is it a non-issue?
=======================================================================
Time when worker started job: Mon Aug 24 2009 15:36:40
Start time for file is: Mon Aug 24 2009 15:36:40
sqlplus -s APPS/***** @/deverp1/appsvr/deverp1appl/per/11.5.0/patch/115/sql/penzlhee.sql
declare
ERROR at line 1:
ORA-20000: ORA-00060: deadlock detected while waiting for resource
ORA-06512: at line 101
Time when worker failed: Mon Aug 24 2009 15:36:43
Evaluating symbolic arguments ....
Done evaluating symbolic arguments.
Time when worker started job: Mon Aug 24 2009 15:36:45

I want my Mail to not make a thread out of all related messages into one. I hate it.

With my new Mac came the new Mail. Now I hate it. It puts everything on to a single thread of messages. And if you open the thread and there is more that one unread message, you can probably skip one of the unread.
I exactly what happens in GMail.
Does somebody know how to undo this?
Thanks.

Open Preferences for Mail
Open Viewing
Deselect Include related messages
Allan

GR related message for a PO in RZ20

Similar Messages

Maybe you are looking for