GR reversal settings

Hi all,
What are the settings in SRM and ECC which determine whether GR reversal can be done even though the invoice is posted?Can some one explain w r t transaction codes/SPRO config path?
Thanks.

Hi Rads1234,
First thing to bear in mind is that:
Payment done then GR can not be deleted unless you delete the payment.
If payment is not done and flag "Goods-Receipt-Based invoice Verification" is not ticked then you can delete GR even if invoice is already done.
Flag is marked at Vendor Master Data level in the backend and transferred to SRM via jobs.
What implies this flag?
     First of all, independently of the flag a payment is allowed only when GR and Invoice are created.
     When flagu201D Goods-Receipt-Based invoice verificationu201D is enabled, Invoice can not be created unless the corresponding GR has been created previously. Without the flag you can create an invoice ( not a payment) before the GR. As all the vendors does not have this option enabled, invoices can be created before the GRu2019s
     When flagu201D Goods-Receipt-Based invoice verificationu201D is enabled. GR can not be deleted only the option of u201CReturn deliveryu201D is enabled.( Because GR are linked to the invoice)
Regards,
Ab.

Similar Messages

  • UK expert required with DNS and reverse settings etc.

    I first posted this in Leopard by mistake.
    I am running a full mailserver and need to have my DNS and mx records set up correctly. I had a "Consultant" here yesterday until 11pm, but he could not do it, it was obviously beyond hin ken. The problem I have is that we have no email for two days, he says he is only going to charge me for 8 hours and he has achieved nothing. PC's on the network cannot access the company website as the url is resolving to the xserver instead of the internet. PC's cannot access the smtp server although Macs can. We are not able to receive any incoming email and I believe that our firewall is switched off.
    I need a recommendation of someone who really knows their stuff and can provide immediate professional help.

    Hi Paul,
    if you like, drop me a note through the contact form here: http://osx.topicdesk.com/
    I can probably help you remotely or tell you who can assist you locally in the UK.
    Alex

  • Reason Code for Reversal

    Dear Experts,
    When I am doing reversal of any document using FB08, I am giving reason code as Cheque Bounce or some other reason code. But when I am viewing the same document, the reason code is not available.
    I have checked the same in BKPF but the same is not available there also. Please advise why the reason code is not posted in table.
    Thanks,
    Deb

    I have tried with all fields you have mentioned, but unable to find the entry for the reason. I think there could be some problem in "Reasons for Reversal" settings in SPRO. There have 2 combination of selections, 1 for negative entries and another is for Alternative Posting dates. I have also tried with all the combinations, but still it is not working. Please advise if there is some other combination or assignments for these codes to somewhere to get the desired results.
    Thanks,
    Deb

  • Can't save DNS settings - 'Reset'

    Hi everybody,
    I've been trying for a day to setup my DNS to my server (PowerMac G4 running Leopard Server 10.5.4)
    So, I would like to add a primary zone, a machine (the server) and a reverse DNS.
    I can do this (is appears in the list) but when I click 'save', all the settings I made disappearing (well, not exatcly, it only reset all machines/aliases and reverse settings) but I keep the primary zone (if I add a nameserver, click save... the nameserver is not saved/the machine is not created)
    I don't know what I did wrong. I also found a '101' about DNS in Leopard Server... I did the same as the '101'.
    In my system log, I found this:
    +Jul 17 13:41:39 server servermgrd[186]: servermgr_dns: Failed to save zone 'null.' because the zone does not have a nameserver.+
    I don't have a 'null' zone! I've got a tucpasquic.com. zone (it is in the list) and it is kept when I save (tucpasquic.com. is my primary zone)
    Is there something to do to reset all the DNS settings?

    Hi again,
    so, I didn't find why it didn't work... but:
    I created a new zone with the same name of the 'bugged' zone, and it worked, don't ask me why!
    Anyway, I've got a successfull message in changeip:
    +The names match. There is nothing to change.+
    This was the only thing I wanted!

  • Low volume on Ipod Nano when playing through car stereo

    I used to own a 4 gig ipod mini, and I'd connect it to my car stereo via a stereo cassette adapter. Well, that little guy crashed after a few years of good hard use, and I bought an Ipod Nano. Only, when I play the Nano through my car stereo, the volume is really low. Is there any way to fix this? I'm thinking maybe the Nano doesn't have the same amplification as the mini, and that's why the volume is low, in which case there's going to be no way to play it through the car stereo. I've tried two different stereo cassette adapters so I know that's not the problem. Anyone have any clarifying thought on this? Please help. David

    I use a cassette adapter in the car as well, and also have to adjust the voume on the stereo and the ipod to a higher setting than what I would when listening to a cassette or CD. I've used this adapter with another brand of MP3 player before I got my nano and it was the same as the nano in regards to having to turn up the volume.
    In using the adapter in different cars, I've noticed that on some cassette players, I have to swith the auto reverse from say, tape A to tape B in order to get sound out of the adapter. You may want to check the auto reverse settings on your cassette deck, if you haven't already.

  • Lights wont stay on the media center thing

    i just got this computer its a toshiba satellite A665-S5170 and the lights on media center thing were always on so was the light about the touch pad, but i wanted to see what eco button did so i clicked. it turns out it turned off all the lights except the power button and now i cant seem to turn those lights back on.
    i click on the volume buttons and it does turn on for a few seconds but then turns off again. i want to know how to turn them back on so they stay lighten up the whole time since i liked it that?

    I always leave the lights off to save battery power. 
    I think all you have to do is hit the Illumination ON/OFF button
    (arrow) on the media control buttons located on the system
    control panel above the keyboard and it will turn the lights back
    on. It was one of the first things I turned off when I got the
    machine. It's always plugged in anyway.
    Main thing is not to panic when something unexpected happens.
    There are many reversable settings on these machines that
    require little more than a check mark in a box and a mouse
    click. System restore is not the first thing I would reach for.
    The manuals for these systems are available on the start
    menu under My Toshiba> User's Guide and also under the
    product support link at the top of the page. You might even
    be able to get a faster and simpler solution to a problem on
    the forum or searching the web.

  • Can't See Me OnLine

    Hi to all m8s,
    i have a prob with iChat. I log normal in iChat with out any problems i see my friends in friend list but they can't see me on-line all time they see me off-line. I test my account from the same place (my home) with other Mac (iMac 21.5") and its ok my friends CAN see me. Where is the problem ? Need to delete something somewhere ?
    Thanx a lot.

    Hi,
    I can tell you that jillo85's issue was that her Buddy was Blocking here and did not remember setting it.
    A full list.
    If you Block a Buddy they will appear off line
    The reverse is also true if they Block you.
    At the same time you have to consider the Allow Lists.
    If a Buddy does not have you in their Buddy list and sets "Allow Buddy List Only" then you will see them as On-line.
    If they use Allow Specific People then no matter if you are in their Buddy List or Not, if you are not in that list then you are Blocked and will not see them as On-line.
    Being Not Allowed is effectively the same as being Blocked.
    Of the above some of the reverse settings are also true. (depending who is in your Buddy list)
    The Buddy could be set to Invisible and have forgotten - their Buddy List looks OK but only the people they call can talk to them.
    Of course there can also be sync issues at AIM.
    Extras
    If you set up a Test Mac User Account (or use another Mac User account) that is not an Admin account and set up iChat there with the same iChat Detail AND then try Parental Controls then it can effect iChat in your Regular Mac User account.
    Setting the Parental Controls blocks all Buddies until you list them in the Allowed List.
    This sets all your Buddies on the AIM server as Blocked.
    If you then leave that Mac User Account and login on your normal Account without first taking Off Parental Controls then your Buddies Stay blocked.
    You will find in your regular iChat > Preferences > Accounts > Security everyone has been added to the Blocked List.
    There is more...
    If you do not set iChat to Set the Status to Off Line on Quit (See iChat > Preferences > General Section) in the second (test) Mac User Account then that login can stay active as you don't fully log out.
    A similar effect can be caused by a second login (Another Mac, AIM Express, IM Forwarding/Phone etc.) where one login overrides the second.
    This can cause issues with deleting Buddies as well as the other Login list a Buddy List with the said Buddy in and keeps telling the AIM server they are a Buddy.
    So, if on a Work Mac you set allow Specific People Only to only allow Work colleagues then you will have Blocked all others.
    (obviously I have listed on one scenario and there are others to consider)
    Summary.
    The settings in iChat > Preferences > Accounts > Security set at either end can have a bearing.
    Using Parental Controls in a Managed Mac User Account with the same iChat info/Screen Name/Buddy List can effect how the User Account you use works.
    A computer or device that creates a second Login should be set to exclude being Logged in on Quit
    If you feel you have excluded all other options and think the AIM Server are out of sync then delete com.apple.ichat.AIM.plist to re-establish your Connection afresh.
    This .plist is found in your Home Folder/Library/Preferences
    Restart iChat if Open.
    8:56 PM Tuesday; May 11, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • BizTalk published WCF service throwing HTTP 404 error using ISA reverse proxy settings

    I have published my schemas as a WCF service from BizTalk 2010 "Publish WCF Service" wizard. I used Wcf-basicHTTP adapter in receive port. I am able to run the service successfully on localhost IIS and I tested my biztalk solution by sending request using SOAP UI and got response successfully.... Now: Actually, I need to give this service endpoint to my vendor who will send request from outside my company's network i.e. internet. In my infrastrucrue BizTalk is behind the firewall so, we setup a REVERSE proxy server at DMZ layer and it is configured properly. I have tested a simple WCF service by replacing the localhost with Proxy server configured address <DNSName> and it worked absolutely fine. But when I change localhost in my BizTalk schema based published WCF service it is not working and I am getting following error. Really strugling to get it resolved. I wasted a whole 3 days....very upset. Please help me out by giving the detailed step solution. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /BizTalkServiceInstance/MyService.svc I am surprized why other c# code based WCF services are working fine with reverse proxy settings. Server Error in '/' Application. The resource cannot be found.Is there any special things to consider Biztalk exposed wcf servcie over ssl in IIS cluster with ISA

    Hi Singam :)
    First I would start by browsing any other files (files other than the one from WCF) just to ensure that the reverse-proxy’s redirection rules are set correctly. If you get the same 404 error when you try to access other service/files “through reverse-proxy”,
    then it’s an issue in the redirection rule(s) in reverse-proxy.
    If others are fine i.e. no issue in reverse-proxy setup as such, then try the following for WCF service's web.config file. I have seen this issue in WCF service (not just BizTalk’s artifacts exposed as service in reverse-proxy). Add serviceHostingEnvironment
    config as show with in serviceModel section.
    <system.serviceModel>
    <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
    </system.serviceModel>
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. Any ideas of how to fix this?

    Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?

    Hi im,
    Thanks for using Apple Support Communities.  This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
    Apple TV (2nd and 3rd generation): Troubleshooting video issues
    http://support.apple.com/kb/TS5148
    Cheers,
    - Ari

  • I backed up my iphone 4 before updating to my iphone 5 and it restored to default settings. As a result, i have lost all my photos. Is there ant way to reverse the back up as I have a 2 month old baby and desperatly want to retrieve my photos :-(

    I backed up my iphone 4 before updating to my iphone 5 and it restored to default settings. As a result, I have lost all my photos. Is there any way to reverse the back up as I have a 2 month old baby and desperatly want to retrieve my photos :-(

    Pictures are designed to be copied off the device regularly as would be done with any digital camera.  There is no logical reason why anyone would fail to do this with supposedly important pictures.
    If a recent backup exists, it is also possible to restore the device from the most recent backup, this may restore pictures to the device.  If it does, COPY THEM OFF THE DEVICE IMMEDIATELY for safekeeping.

  • Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation appearing rightside height is more than the left side. In reverse manner from the left side.

    Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation bar appearing rightside height is more than the left side. In reverse manner from the left side. I dnt know whether it is default feature of iphone or not but i am really disappointed due to this. So please anyone help me in this issue and let me clear my doubt and make me happy. Thanks in advance.

    I believe what you are seeing is an optical illusion when viewing the screen from the side. Try to align one of the one of the options in Settings, like General, with the navigation bar you'll see it does the same thing.
    Hope that helps

  • Can you reverse delete the preferences/settings file.

    OnOne software advised me to delete the preference/setting file in order to prevent constant crashes from using Perfect Effects 8.  It didn't help.  Perfect Effects still crashes CS6, and now I lose my settings everytime it crashes.  Can this be reversed?
    They told me to hold down Alt, Ctrl, and Shift keys (Mac: Command, Option, Shift) while starting up Photoshop, which I did and then select "delete the preferences/settings file".
    How do I reverse this.  It didn't help the crashes at all, and it's SO much work to get my setting back every time it crashes.

    Holding down the modifier keys at startup is a one time deal. It has to be repeated each time you want to reset the preferences.
    So thats telling me (so I assume) that your preferences maybe corrupted or there is a permission issue with the file or folder the file is located in.
    Here is a basic trouble shooting page by adobe that may help.
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    If that don't help, let us know and please provide what OS you are using as that may be necessary if it is a file or permission issues.

  • I accidentaly pressed on "forget this devise" in the bluetooth settings. Now my iPhone would not even list my headset. How can I reverse what just happened and connect my headset? Can anyone assit please?

    I accidentaly pressed on "forget this devise" in the bluetooth settings. Now my iPhone would not even list my headset. How can I reverse what just happened and connect my headset? Can anyone assit please?

    You need to put the headset into pairing mode. The phone should then see it even though you have done the forget this device.

  • Error in accrual reversal upon Difference procedure settings

    Hi Team
    For product type Corporate bonds (04A) we have configured Difference
    procedure for Accrual of interests. When we execute the flow of transactions the accrual amount which needs
    to be reversed upon sale (even for full not only partial) is not getting reversed.
    We had refered to SAP note no. 912679 and 918570 and done the config
    settings in our  system.
    We had tried couple of combinations in Derived Business Transaction
    settings for interest but still not able to reach the desired results.
    We feel one more entry system need to pass that is reversal of accrual
    to interest upon sale.
    Kindly let us know if there is any other SAP note or config settings
    missing at our end.
    Regards
    Deepak

    Hi Narinder
    Thanks for showing interest in this issue.
    We have activated difference procedure meaning in SPRO under FSCM - Treasury - General settings - Accounting - Accrual/Deffral - Update Types - Assign update type for Accural
    here we have updated our product type 04A with profit related update type SAM5000
    And next step under Assign Additional update types for Difference procedure we have added for our product type 04A update type SE8701 for outflow and SE8702 for inflow.
    We have both these update type SE8701 and SE8702 relavant for posting.
    We have not created any new update type.
    There is no error only issue is when i sell partially the excess of accural which needs to posted back to interest is not getting posted. Is there any specific settings we need to do to make this work.
    The issue arised after we activated one business function under EPH3.
    Kindly let me know if you need further details on this.
    Regards
    Deepak

  • Calendar said if I wanted to save entries for more than a month to click 'all events' in settings.   Now all events except birthdays have disappeared!  Have tried to reverse request with no luck.  HELP!

    Calendar message said if I wanted to save entries for more than a month I should go to settings and change to sync for 'all events'.  I did this and all but repeating birthday entries disappeared.   I have tried to reverse but nothing has reappeared.  HELP!

    Welcome to the discussions,
    WHY does it claim to be 8G but my capacity now says its just 6.83
    The size of you HD is calculated binary when it comes to use it, instead of decimal when companies want to advertise there products. 1 KB=1024Byte instead of 1000KB as advertised by the manufacturer. In your case this reduces the actual available space by the factor of 0.93 or approx. 7,4GB.
    If you have an "other" section in your color bar showing the different types of data on your ipod, which is bigger than 500MB, this could be a sign of corrupt data caused by a sync that did not complete or copied damaged data. A restore will reduce the size to normal again.
    Restoring: http://support.apple.com/kb/HT1414
    If you restore your ipod, iTunes will install the newest firmware first and then add back your data and settings from your last backup if you choose to "restore from backup". Every backup is replaced by the following one, so make sure to include this folder in your backup routine in case you'll have to go back.
    You can check the location and size of the backup folder for your ipod here:
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    copied from: About backups http://support.apple.com/kb/HT1766
    Sorry, I can't answer your payment question, I have never used your kind of setup, maybe you can find something useful here: http://www.apple.com/support/itunes/

Maybe you are looking for