GR slip print-out & automatic default for the print tick

Hi,
I have followed the steps as outlined below for the solution and unfortunately the GRN document do not print as anticipated. I was wondering if the non-assignment of the MM or FI Program might be the cause? Please advice if I had missed something to allow this to print immediately.
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, (for returns use WE03) ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Edited by: JML Nkgapele on Dec 1, 2008 11:10 AM

Your answer did help but still expriencing challanges with the following:
Output Types
-Print Parameters options are as follows
    >Plant/Storage location
    >Plant/Storage location/User group
    >User exit
   >User parameters
   >User
Please advice which of the above is appropriate?
-Should there be a program reflected on change output field for General data screen?
Please advice since I'm currently experiencing shotdumps(runtime errors) when processing the GR.

Similar Messages

  • Value not populating in the print out (sales order) for the 1st time

    Hi friends,
    While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
    Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
    Please give me some clue on where to check and how to go about fixing this problem.
    Regards,
    Shanu.

    Dear Shanu,
    This issue may be related bug in the output program so take help of ABAPer to fix the issue.
    I hope this will help you,
    Regards,
    Murali.

  • Sapscript - print out seperate labels for multiple delivery items

    Hello,
    we do have an output type that prints barcode labels for deliveries (VL02n).
    Now if there are more than one delivery item on the delivery, it will only print out a label for the first item.
    How can I trigger that all items will be printed out on a seperate label each?
    thanks
    Anne

    Hi,
    Just open the script which prints the lables and check for the variable name used for label printing
    Check the script for variables and pass the value to that avriables and those to be declred in your print/driver program.
    when you call write_from in the loop  there you give a window name what ever the value in the variable it will pass to script
    Regards
    Krishna

  • Unable to Print, only Print To File, w/o the printing.

    When I open up a PDF and try to print I am unable to print. The printing window pops up, and you can choose your print, but when I press the 'print' button, a window opens for Print To File, and when you save, nothing happens.
    I have tried restarting the computer, upgrading, and even unistalling and reinstalling. I cannot figure it out! 

    Look for the "print to file" option in the print menu and deselect it.

  • Firefox doesn't seem to be able to print to my printer i.e no response from my printer when I click on the PRINT button on an online receipt

    This has happened once before recently and I fixed it by restoring my computer to an earlier date. I don't know what changes but this shouldn't happen and has never happened until fairly recently.
    Example: I buy something on line and try to print out a receipt but the printer does not respond. Under this situation I have to copy the receipt and paste it into a word processor.This does not happen in IE which I seldom use except out of frustration under these circumstances

    Select a document, CMD+P, and set the color options as shown here:

  • I want to set default printer settings to be used only for a specific type of application, certain documents. All other print jobs should use a different default setting for the printer.

    I am printing a specific document from a web based application. This document need to be printed in landscape. So I would like to set the default settings for this specific printer to landscape. But for all other printers it should be portrait. But this does not seem to work. The browser picks the settings from the standard/default printer and uses this for all print jobs.

    Embie wrote:
    I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware.  Great.  I will replace my faulty hardware manufacturer.  Simple, HP never again.
    In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you.  Please read this post then provide some details in a new thread.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?  What is the problem you are having (with the printer...)?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printing grayscale by default in the HP LJ 500 color MFP M570dw

    Hello!
    Help me please, tell me how i can set by default for this printer printing grayscale?
    I have mac os, and windows, but in the driver settings i don't see this tick.
    And i need choose printing grayscale every time when i printing from any application.

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
    I have provided the HP LaserJet Pro 500 color MFP M570 Support page. 
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Print out in MB90 for GRN is not coming in English

    Dear Friends,
    While taking the print out in MB90 for GRN document, it is not coming in English.It is coming in some unreadableformat.
    In MN21 I have mentioned the language as EN.
    In the configuration of output type WE03 I have mentioned the language as EN intransaction code M706.
    A reply will be highly appreaciated.
    Regards
    Rutabhadra Panda

    hi
    check whether the printer you installed is having the proper driver.

  • How to set up automatic payment for the purchase order

    Hi, All,
    I have one question how to set up automatically payment for the Rent Office purchase Order?
    There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
    Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
    Thanks in advance

    Either you can set up ERS or you can pay directly from the FI side.
    Prerequisites
    Evaluated receipt settlement must be flagged in the purchase order item.
    The vendor must be flagged as being subject to ERS in the vendor master record.
    The goods receipt must refer to a purchase order.
    Goods-receipt-based Invoice Verification must be defined for the purchase order item.
    A tax code must have been maintained in the purchase order item.
    The order price of the materials may not be an estimated price.
    If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
    In Purchasing, you can delete the default ERS indicator in a purchase order item.
    Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
    The selection screen appears.
    You can use the following criteria to narrow down selection of the transactions to be settled:
    Company code
    Plant
    Goods receipt posting date
    Goods receipt document
    Fiscal year of the goods receipt
    Vendor
    Purchase order and order item
    You can define the selection criteria for the invoice documents by:
    Delivery
    Purchase order
    Purchase order item
    Goods receipt document
    Credit memo
    Invoice
    Currency
    Choose  Execute.
    The system issues a log for Evaluated Receipt Settlement, which displays the following:
    Settled
    In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
    Could not be settled
    In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
    If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
    Select the item and choose Exclude from ERS.
    The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
    You can display the following environment information for the order items selected. To do this, choose Goto ®:
    Display purchase order
    Display invoice
    Display material document
    Display long text

  • How to print out a date from the past

    I am trying to print out a date from the past but I cant seem to get It,
    Lets use for example Independece Day,
    How would you write the code in order to print out that exact date?

    Look at the
    [url=http://java.sun.com/javase/6/docs/api/index.html?
    java/util/Date.html]Date APIActually the Calendar class would be better to use, since you can set all the different fields from year to second, plus things like day of week, day of month, week of year, etc.
    too slow
    Message was edited by:
    hunter9000

  • Output(print out) in SRM for backend PO in Classic scenario

    Hello,
    My requirement is to take print out for the backend PO created thru shopping cart in classic scenario.
    i know for extended classic scenario Actions works as in that case PO is created locally and then replicated.
    But in the classic Scenario where the PO is in backend, can we take print out in SRM becasue the detials of that Po is available in SRM to in Fllow up documents in SRM 5.0.
    is there any standard way available to achieve that.
    Thanks
    Robin

    Hi Sarabjeet,
    It does not make sense to print PO from SRM in classic scenario because there is no PO in SRM at all !
    In classic scenario, PO is created only in the backend.
    Only shopping cart is created in SRM.
    Kind regards,
    Yann

  • Each time I print, a data page of the print job is printed out.

    Each time I print a data page of the print job is printed out. How can I Disable as it is a waste of paper?

    Hello john42gd,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    OS X Mavericks: Change or update printer software
    http://support.apple.com/kb/PH13761
    Have a nice day,
    Mario

  • How do I print out a receipt for my subscription

    how do i print out a receipt for my subscription

    Hi benitaroth,
    Please see Manage your membership and payments | Creative Cloud. You can find instructions for printing your receipt in the Payment & Credit Cards section.
    Please let us know if you have additional questions.
    Best,
    Sara

  • Print out streaked even after the 3 steps cleansing of printhead

    Hi,
    I keep on doing the 3 steps printheads cleansing since the print out remains streaked or the red is missing.
    What if anything can be done before taking to 'a repair' and after the 3 steps printheads cleansing??
    Thanks for help
    Goradana

    Please read this post then provide some details.  What printer model? What operating system?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to print out multilingual reports from the main report using Xliff temp

    Hi all,
    How to print out multilingual reports from the main report using Xliff temp?
    When I want main report call subtemplate and finish xliff tranlation
    <?for-each@section:INVOICE?><?end for-each?>
    <?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
    <?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
    Prints out fine with Finnish translation
    But if I want in main program to check what language is used e.g.
    if trx_number = 142 call Finnish translation and if trx_number =144,
    call English translation.
    <?for-each@section:INVOICE?><?end for-each?>
    <?if:TRX_NUMBER=’142’?>
    <?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
    <?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
    <?end if?>
    <?if: TRX_NUMBER=’144’?>
    <?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
    <?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
    <?end if?>
    Prints out always in English and never the Finnish translation.
    Program goes fine to if branch but does not print out Finnish
    Does anybody know what could be wrong?
    BR
    Kari

    Thanks Amit,
    I have two layout, main-layout and sub-layout
    Main layout call subtemplate
    I have registered layout and xliff-file
    Main template
    Localized Templates
    File Name           Language Territory
    XXNS_INVOICE_MAIN.rtf      English
    SUB template
    Localized Templates
    File Name           Language Territory
    XXNS_INVOICE_SUB.rtf      English
    Translatable Template
    File Name           Language      Territory
    XXNS_INVOICE_SUB.rtf      English      United States
    Available Translations
    Language Territory Progress
    English Finland Complete
    If main report call subtemplate and finish xliff tranlation
    <?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
    Prints out fine with Finnish translation
    But if I want in main program to check what language is used e.g.
    if....
    <?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
    .....end if;
    if....
    <?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
    .....end if;
    Prints out always in English and never the Finnish translation.
    Program goes fine to if branch but does not print out Finnish
    Do you it's set up problem or program problem
    BR
    Kari

Maybe you are looking for