Gr slip printout

hi
what is meaning of
individual slip
colective slip
individual slip with text in gr printout tell me in layman language

hi
Check following if usefull to u
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, (for returns use WE03) ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
regards
kunal

Similar Messages

GR Slip at movement 105

Hi gurus
We are using 103 + 105 to post goods receiving into storage at 3 plants.
Now I need a GR slip printout when we make goods receipt movement 105. But it should only apply to one certain plant.
When I look into the customizing, it seems not possible to set it up for only one plant?
Please help me out. Thanks in advance
yu

Hi,
To get GR/GI slip for the 105, print indicators can be set in movemnt type. This setting is movement type wise not at plant at level. To do plant level go for Z movement type and do cusamization according to your requirement. I hope this will help you. Thanking you.

Print out of Permit

Hi Experts,
I have the following scenario:
1 I have created a Maintenance Order , assigned a permit, while assigning the permit I have checked the box Print for the Permit and saved the order in T Code Iw32
2. Issued the permit in T Code IPM2.
3. Confirmation completion of the Order done in T code IW41.
I want to take print out of the Permit.
I went for the order printout option in the Order, there I could found Confirmation printout, material issue slip printout, Order text. But not the Permit print Out.
How can I take a print out of the Permit.
Please help me out in this regard.
Thanks and Regards,
B. Praveen

hi praveen
permits are included in the operation contorl ticket itself,there is no sperate one for printing the permits
Operation control ticket
The operation control ticket provides the employee responsible in Plant Maintenance with a complete overview of the order. It also contains details of permits
regards
thyagarajan

Problem with printout for Mvtype 551 and Collective slip

Hi there!
Need some help.
Well, I have several items and when posting them with 551 in MIGO and check printing active on collective slip (3), the printout does not show any of items.
When posting it with same MvType 551 and check printing active on other two values (1 or 2), I get 1 printout for every item.
So, what should I do to have one printout for all items for MvType 551?
Thanks!

Hi Ines,
Go to NACE, select ME (Inventory Mgmt), click on procedures, select Inventory Mgmt, click on control.
Here you should find an entry for your condition type there should an entry with requirement type having a value, for GR it is 173, so for your case, check which one applies.
If helpful award points
Regards,
Vivek

Printout GR Slip when GR posted via BAPI_GOODSMVT_CREATE

Dear all ,
We need to printout the slip when we do the Goods receipt with movement type 101 via BAPI_GOODSMVT_CREATE.
We set the user parameter NDR with value X in the User parameters to bring the field always on in the MM transactions but when we post GR via this BAPI_GOODSMVT_CREATE there's no form printed out.
Does anyone knows if is possible to printout an slip when we are posting GR via BAPI ?
Best regards,
Ale

You may check SAP note 520813
12. Question:
What do I have to keep in mind if I want to trigger the print output of a goods receipt or goods issue document when I execute the BAPI?
Answer:
You must make sure that a user name is transferred in the PR_UNAME field in the header structure. This user is used for determining the print parameters. You must set the value 'X' for the 'NDR' parameter ID for this user. Make sure that all customizing-related settings have been made for this user.
The GOODSMVT_CODE import parameter is relevant for the print version. The transaction code is derived from this code (see table T158G, for example, code 04 stands for MB1B). The BAPI uses the print version that is assigned to this transaction for the goods receipt/goods issue document. This is customized in transaction OMBR. Check your Customizing and make sure that you have assigned a print version to this transaction and that a conditional output record exists.

No need label printout for 103 movement

Hi Experts
I have experinced some error while using 103 movement.Please below I have furnished details fo error.
User gets error when ever using 103 (Material post to block stock) movement, which is also queuing in the label print out without printing, when ever using 105 movement for label printout that time gives a problem with unprinted label print outs for 103 movement, user does not want label printout for the movement type 103. Now workaround is currently local help desk is deleting the unwanted printouts from queuing and taking the required printouts.
Please give your valuable resolution for the same.
Thanks & Regards
J.Jeyakumar

hi,
try using user exit for MIGO
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
thanks

How to generate goods receipt / goods issue (gr/gi) slip no. ?

Hi all SAP experts,
i did following steps
1) by using omc1 assigned gr/gi slip number for our plant.
2) created internal number range for no. range group code.
3) intervals are created for gr/ir slip in 2009 by using omj6 t-code.
4) assigned no. range group code to plant and movement type 101.
When i create Purchase order and taking goods receipt w.r.t. p.o. still gr/ir slip no. not generated internally . I checked it for MB51 t-code still gr/gi slip column is empty i.e. no number generated.
So how can i do gr/gi slip no. generated internally ? and what is the transaction for printout of gr/gi slip no. or related configuration ?
regards,
Nitin Nerkar

Dear,
Make this field RM07M-XABLN as mandatory in OMJX transaction and check it in OMC1.
Regards,
R.Brahmankar

Can't print to Epson TM-U590 Slip Printer from Report Generation Toolkit with LabVIEW 8.6.1

Hi all,
I have an application that uses the Report Generation Toolkit to print tickets to a docket printer. Usually this works fine - I have 8 existing installations where there are no problems
I'm currently installing the software at a new site that uses an Epson TM-U590 slip printer and I can't for the life of me get printing to work
Using a Standard Report, the Print Report.vi returns error -41002 which indicates it can't find the printer. I've opened up the VI using remote debugging and it does find the printer name correctly with the Query Available Printers.vi. It gets an error code -2147352567 from the Printout node, which then gets replaced with the -41002 error which is reported.
For historical reasons I'm still using LabVIEW 8.6.1 for this project. I'm considering moving to 2011 or 2012 but I've had reliability issues with other parts of the application after attempting to update to a newer LabVIEW version so I'd like to avoid that at this stage.
The application is running on a standard desktop PC with Windows 7. The slip printer works fine if I print to it from Notepad, and my application is happy to print to any other printer, just not the slip printer.
The slip printer is using the LPT port. Previously the docket printers I've used have been USB but I would expect the printer driver to hide this detail from the application...
Any ideas would be much appreciated
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Solved!
Go to Solution.

I've managed to sort out the problem, thanks to this KB article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64
I'm now having the same issue with a Star docket printer (a TUP592), this time with another program developed in LabVIEW 2011.
As mentioned in the article, the problem is actually to do with the margin settings rather than the printer name, despite what the error message says
After some experimentation, I've gotten the Star printer to work by setting a large (>14cm) right margin. No idea why this is required as it seems to print right up to the right edge of the paper quite happily, but there you go.
So I haven't defintely fixed the original problem yet as I haven't gotten back to the site, but hopefully this will be of some help to someone else.
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion

GR-GI printout for more than one item in one document

Hi Friends,
In my GR document, there are more than one materials receipted in one document. I am taking the printout of GR slip by assigning the printer in MB02 T-Code. And then through MB90 i am taking the printout. But in MB90 in the print preview, I can see only one item at a time. where as I have receipted more than one item in one document. In MB02 I have to assign the printer one by one to each item and in MB90 also i can see only one item in the GR slip. How can I take the printout of the of all the items in the GR document all at a time??????
Same is the case for Goods Issue slip. Here also i can see the print preview of only one item at a time.
Please advice.
Thanks & Regards
Satya

Satyabrata,
In transaction "OMBR" define print version indicator as "3" for the transactions through which you are creating this material document this basically defaults when performing the transaction. You can also set the indicator to collective in the intial screen of the transaction.
Defination of print version:
Version for printing of GR/GI slip, Specifies the version of the goods receipt/issue slip.
You can print out three different versions of a GR/GI slip:
Individual slip (version 1)
In this case, one GR/GI slip is printed out for each item.
Individual slip with inspection text (version 2)
In this case, one GR/GI slip is printed out for each item. In addition, a quality inspection text is printed if there is one in the material master record.
Collective slip (version 3)
In this case, a collective slip including all the items in a document is printed.
Hope this helps...
Regards,
Prasobh

Print GR slip for GR against an Outbound Delivery

Dear Experts,
I have a requirement as below.
Need to print GR slip for GR against an Outbound Delivery in VL02N (for Return Orders)
What setting needs to be done?
I donot see the GR slip check box in VL02N which normally exists in MIGO
However, i need to print GR slip for such GRs in VL02N
please help
regards,
Shetty

Re: Printout during Goods Receipt
See second, fourth reply and final post (which you've already found answer to via another thread).
Regards,
Nick

Collective GR slip is not getting printed

Dear All,
I have done all configs and also maintained MN21 conditions for WE03 output type (also for WE01) . It is printing individual slip (2 copies) and one copy as collective while taking printout after MIGO (4 is selected in despatch time). Actually these 2 copies are because, I maintained output conditions in WE01 (ME, and 3 (collective slip)) for 2 copies and print immediately). However if i remove this and maintain only in WE03, it is not at all prinitng the material doc, despite all configs. I also maintained parameter NDR as X.
Can you please throw some light and solve the same.
Thanks ,
satish

Hi,
Have you ensured there's no automatic access sequences to determine individual slip in NACE?
If you get both WE01 and 03 in GR, there must be an access sequence to them.
If this continues you should ask a BC to look at the program.
Regards.

GR/GI Indivitual and Collective slip

Hi All,
I am facing issue for the GI. I am creating a material document with multiple line items. When i tried to save the document with Individual slip, It print's fine (each line item per page). When i tried to save the document with Collective slip option, it should print all line items in a single page. Which it's not happening and it's printing as like Individual slips.
I have checked the config. Config details are below.
Output TYPE: WA01
Program : SAPM07DR
Form name: WA_SCHEINVERS1
Form routine: ENTRY_WA01
Everything is standard, I want to make sure any configuration is missing or for collective slip we need consider any other things.
Point's will be rewarded.
Regards,
Hemanth.
Edited by: keerthipati hemanth on Oct 7, 2008 11:31 AM
Edited by: keerthipati hemanth on Oct 7, 2008 1:08 PM

hi hemanth
For Movement Type: 313, Stock is transferred from the Issuing S.Loc to the Transit and Transfer (You can see in T-Code: MB52 Column: Transit & Transfer) and you have to do the Movement Type: 315 for removing from the Transit to the Receiving S.Loc.
So when we take the printout of the material doc with movement type: 313 only Issuing S.Loc will be updated in the script and automatically generated item in the Mat Doc will not be printed. Once you Process the material doc with 315 Mvt Type you get the print out of the Receiving S.Loc.
If they want the both the line items in the Mvt Ty:313 Mat Doc you can develop a Z Script and attach to the Output type. You will get all
the information from Table: MSEG.
-ashok

Printout of GR

Hi
What are the settings required to be done to take the print out of the GR?
Also, what is the procedure to take the print out of the GR?
Regards

Hi,
1.In standard SAP, with output type WE01, maintain condition records in MN21 with transaction event type WE,print version as "1" and print item as "6"
2.Maintain printer in Communication method. Don't forget to put on indicator print immedietely and save.
3.While doing goods receipt don't forget to put indicator ON for printout near indivisual slip tab. If this indiactor is not ticked the output will not triggered.
You can try above.
Deepak

Printout of Transfer Posting/Scrapping transaction

Hi Friends,
I am able to take the printout of Goods Receipt(101 Movt. Type) and Goods Issue (Movt.Type 201 & 261) only. I am unable to take the printout of Transfer Posting:storage location (Movt. Type 311) and Scrapping (Movt Type 551).
I am using the T-code MB90 for printout of GR and GI. I am using Output type WA03 for GI and WE03 for GR.
But when I select WA03 for printout of Scrapping document or Transfer Posting Document, the system gives a message "No message for Initial processing exists". Should I use WA03 as output type or should I select something else.
Please guide for the printout.
Thanks & Regards
Satya

Hi Satyabrata,
use T-code OMB5 , OMB4 and OMJL and setup relevant Print item
we can have following option:
P     Text
     No Document Printout
1     Material Document Printout
2     Return Delivery
3     GR/GI Slip for Subcontracting
4     Inventory List W/o Sales Price
5     Inventory List w. Sales Price
6     Matl Doc. Printout for GR/GI
Q
X
Please reward If useful.
thx,
MJ

GR slip printting issue in TC migo.

Hi All,
i'm trying to setup printer, i have done all setting but still i'm unable to get the GR Reciepts printout in MIGO. any body can help me please.
khan

Pls check the below settings for material document Print out:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

Gr slip printout

Similar Messages

Maybe you are looking for