GR year is different than PO year
hi,
my goods receipt is posting in differenct year and PO create in differenct year.
PO year: 2009
GR year: 2010
how can i post GR in PO year (2009)
Regards,
Ali
Hi,
Means that you are posting in FY 2009 with october and november is open.
then what is problem.....?
Material document is seen with year i.e. Calendar year in which the material document was posted.
while FI document with FY year.
REgards,
Pardeep Malik
Similar Messages
-
Acrobat 9-forms-Radio buttons print different than check boxes
I am using Acrobat Pro 9 to create forms.
I've used both radio buttons and check boxes (that are circles).
Forms were designed in InDesign with Zapf Dingbats as the open circles to be filled in.
I used radio buttons when the user had to pick one over the other.
I used check boxes when there were multiple choices or I wanted the user to be able to uncheck a box. (I used the circle style so they would look like radio buttons).
The radio buttons are printing differently than the check boxes. It looks almost like there is an overlay on top of the actual open circle created by Zapf Dingbats.
I checked the "appearance" window and there is no border or fill color on the radio buttons (same for the check boxes).
Under the <general> tab, <common properties> is visible. I'm assuming it should be in order for the radio button to appear on the form.
I would appreciate any input as to how to fix this.
Thansk!
MaureenThat's just the way radio buttons are, and one reason I rarely use them in preference to check boxes. If Adobe wanted to, they could allow you to use any appearance you want for both the selected an unselected state of a check box or radio button, but they've actually further restricted your options over the years.
-
In the Color picker, the selection in the color palette is different than preview.
Working in Illustrator CS5 on a Mac. When choosing a color in the palette, the preview showing up is different than what is in the palette. If I hit "OK" the actual color chosen is the one in the palette, not the preview window... Including some pics for reference.
In my 10+ years of using Illustrator, i have never seen this.
I am using a Dell monitor on a mac... not sure if that would make a difference.The new/old color preview box is not color managed and thus not reliable. I think that's the way it has always been. It will be the same as the selected color if you assign to your document the color space of your monitor using Edit > Assign Profile. People without a custom monitor color profile by default will not encounter this problem - they always see the colors wrong but consistent. Once you have a custom made monitor color profile you will see a difference between the same color in color managed and non-color managed software and sometimes parts of the same program like Illustrator can be color and non-color managed.
-
ESSO PG on something different than MS AD
Is it possible to make PG (from 11.1.1.5.1 ESSO distro) functional on something different than MS AD, like ADAM? I deployed the ADAM, LM and PG (both client and server). LM works successfully and (after first sync) created ADAM nodes (of class vGOUserData) in OU=People,dc=domain,dc=local container. Keeping in mind that (in MS AD case) for PG to add user logon I should first manually create user and only after that use "Add New SSO User" link. So, I manually created two semi-empty nodes of class vGOUserData too ("semi-" - due to lack of data to put in very special attributes, including encrypted ones). After selecting "Manage SSO Users" - "Find User(s)" PG successfully shows me all created users (both from LM and manually created). But when I try to add new logons (no difference, for "LM" or "manual" user entries) PG shows me error message saying that "System.DirectoryServices.ActiveDirectory.ActiveDirectoryObjectNotFoundException: The local computer is not joined to a domain or the domain cannot be contacted". What's wrong with it (ADAM & PG are deployed on standalone Win2K3 Server)?
Update: seems that ESSO PG simply doesn't works on LDAP servers other than MS AD. It doesn't works at all. I tested it on ADAM and DSEE. Problems with ADAM are difficult to research, because traffic is protected via GSS-API, so I simply can't sniff network traffic as it encrypted. But as for DSEE, problems are described below:
Documentation (Oracle® Enterprise Single Sign-on Logon Manager Best Practices: Deploying ESSO-LM with an LDAP Directory Release 11.1.1.5.0 E21003-01) says about locator object: +"You must create the vGOLocator object at least at the same level as the container that holds user accounts. Ideally, vGOLocator should exist inside the directory’s user accounts container"+. So I created LDAP structure as shown below:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-ou=vgoLocator
|---(+)-ou=ESSO
|---------(+)-ou=People
|---------(+)-ou=SSOConfig
As you can see, structure looks quite correct: vgoLocator "ideally exist inside the directory’s user accounts container", right?
Than I setup application templates, filled LM settings (via LM Administrative Console), wrote them into registry hive and published all those settings into LDAP (DSEE). It works correctly and LDAP structure now looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator (created manually)
|---------(+)-ou=vgoLocator
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator (created by LM while performing LDAP sync)
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1 (created by LM admin console while publishing settings into LDAP)
OK, now LM works perfectly, but we want to create centralized system, right? So I had to deploy PG. It was deployed and started. The first task was to correctly fill storage settings. I used values as shown below:
Storage Type: Oracle Directory Server Enterprise Edition
Server: esso.hq.domain.local:1389
Root DN: dc=domain,dc=local
User Path: ou=Users,dc=domain,dc=local
Connect as User: cn=Directory Manager
Password: **********
Use secure connection (SSL): no
Use configuration objects instead of application list: yes
Role/Group support: no
Configuration and role/group objects root DN: ou=SSOConfig,ou=ESSO,dc=domain,dc=local
Admin Group DN:
User PrePend: UID
Config looks OK, isn't it?
But when I tried so save settings, I got error "Cannot find any configuration objects". Metalink shows me two articles on this problem: 1305060.1 (says that i must not use space in Configuration and role/group objects root DN). Can you see any spaces in "ou=SSOConfig,ou=ESSO,dc=domain,dc=local" string? Next article was 1298762.1 that says that "This is because the container you have listed in the Storage Setting titled 'Configuration and role/group objects root DN:' does not contain any ESSO objects such as templates or password policies". But that container really contains ESSO objects (three, to be more precise), so that wasn't the solution too.
OK, let's look in depth... I installed wireshark and captured network traffic from PG to LDAP. There was four LDAP-related calls:
1. PG searches object ou=vgoLocator,dc=domain,dc=local. LDAP says "no such object" (of course, because we read documentation and created locator in "ideal" container - inside Users container). WHY? WHY it tries to find it there???
2. PG searches LDAP for dc=domain,dc=local. LDAP says "OK"
3. PG searches LDAP for ou=Users,dc=domain,dc=local. LDAP says "OK"
4. PG searches LDAP for ou=SSOConfig,ou=ESSO,dc=domain,dc=local. LDAP says "OK"
That's all. No more LDAP requests, PG simply throws an error as shown above.
"OK" - said me to myself, let's create locator at the position, where PG expects it to find, i.e. at ou=vgoLocator,dc=domain,dc=local. Wow! PG now accepts settings entered earlier and I almost become happy. LDAP now looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1
|---(+)-ou=vgoLocator
So, let's play with users, yeah? Let's click on "Manage SSO Users" and have some fun? But PG tells me "Invalid storage settings" error... WTF??? OK, let's start network sniffer again and look, what's happened. Oh-oh... Wireshark shows me that PG tries to logon onto LDAP using credentials "UID=ESSOPG\SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL" and LDAP declines authentication requests. BTW, ESSOPG\SVC_SSO is a local user, used (according to documentation, of course (looks like it's now my favorite phrase)) by IIS as anonymous user. WHY??? Why PG uses that user instead of "cn=Directory Manager", that I entered into storage settings five minutes earlier???
OK, if PG wants that user, let's create him in LDAP, yes? So I created such an user in LDAP and now it looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator
|---------(+)-uid=ESSOPG\SVC_SSO
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1
|---(+)-ou=vgoLocator
Test with LDAP browser shows that I can access LDAP using that newly created user. Just one thing: according to LDAP rules, I have to use double slashes in logon name: "uid=ESSOPG\ \SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL". But PG doesn't know anything about such a rule and simply passes "uid=ESSOPG\SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL" (with one slash) to LDAP. LDAP declines auth request. What to do now? Eureka! Let's enter two slashes directly into PG settings! So, let's go to "Web Service Account" page and add one more slash into "User Name" field. Now it contains value "essopg\ \svc_SSO". Cursor moves to "Save" button, clicks on it....
PG shows me an error message: "Please enter the User Name in format "domain\userid".".....
I surrender. I have more than fifteen years experience in software development and information security, but I can't setup such a "simple" solution...
P.S. I asked local Oracle representative: "have you ever tried to deploy PG on non-MSAD LDAP?". He answered "NO, because it's a very common way - to use existing MS AD to store outside data". Very strange opininon:
1. MS AD are owned and supported by IT department
2. IT security projects, like E-SSO are pushed into company by Security department
3. 1 + 2 means that "The less impact the new solution will make on existing IT infrastructure (BTW, MS AD schema extension and storing outside data in it is a VERY big impact) - the easier the implementation process will be too". It's sad that Oracle doesn't understand such a simple thing
P.P.S. He also told me that "if something doesn't works, I should create SR". But there is some problem: in order to customer to buy ESSO and support (required to create SR's) I have to persuade him to use such a solution, right? Solution, that currently doesn't works? So, there's the only way remains: I have to buy SR's and create request on my behalf. But what must such an SR include? Phrase "Product doesn't works at all"? Oracle tries to get money several times for single work (once from me, because I have to buy SR in order to make Oracle's product work, and than from customer, who will buy the product itself)? Right?
P.P.P.S. Forum engine shows two slashes as line feed, so I had to insert space between them in order to show them correctly -
Why is the contents of Safari's downloads folder different than the actual folder?
Why is the contents of Safari's downloads folder different than the actual folder that resides in my users folder?
Problem is if I delete that .plist I'll delete those downloads. I'm still able to launch those downloads from that location so that tells that file is probably not corrupted. I need to be able to located that folder and transfer the downloads from it before I do anything like this. So that begs the question, where is that folder located? When I do a folder search I'm taken to a Downloads folder, but it's not the one that is showing up from within Safari as it's contents are too different.
-
Somehow my apple id email address under homesharing on my apple tv is different than that used for homesharing on itunes in my imac. I can't access home sharing on my apple tv because of this. Can you please tell me how to change it on the apple tv in order to get homesharing to work?
turn off home sharing on apple tv, then turn it on again, entering new credentials. Apple-TV works very reliably with home sharing unlike iDevices which don't
-
If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
ThanksSorry you get only one notification sound for all email accounts. you can send a suggestion to apple here http://www.apple.com/feedback/
-
I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct
Is your phone still signed in with your old iTues ID for iCloud (in Settings>iCloud)?
-
I entered a new calender event using I cloud on my laptop. The enent transfered to my i Phone 5 S but, the start and finish times shown st i cloud on the laptop are different than the times shown on the i phone. How do I sync the times on the i Phone with the times shown on the laptop i cloud calender?
Turn off time zone support on the phone.
-
Photo rotaion in organize view different than edit view & slideshow
Photo rotaion in organize view different than edit view & slideshow. The fact that the power supply to the computer was accidentally disconnected while I was working in iPhoto no doubt was the cause of this phenom.
Any suggestions as to how to re-sync the rotations back up?Thanks for the tip. I wasn't aware of the use of theses two keys simultaneously. It occured to me after this post to just trash the whole library which I had just created for this particular group of photos and re-import the photos to a newly re-created library. I still had the camara connected so as it turned out it was fairly easy. Now that I think about it, if this hadn't been a newly created library just for this group of photos it wouldn't have worked so simply, so I guess I discovered another benifit for having multiple libraries.
I'm glad you recomended the apple/alt key combo though as this knowledge no-doubt will come in handy at some time.
iMac PowerPC G4 800 mhz 1GBSDRAM 17" Flatpanel Mac OS X (10.4.8) Seagate external Firewire/USB HD's:250GB & 500GBSony DSC-V3 & DSC-S8 Cybershot -
How can I have a topic name different than the filename of a linked Word document?
I've encountered multiple issues with linking to Word files ...here's another one: If a Word document is entitled Feature_ABC, then upon generating the HTM after linking it, the HTM's filename and topic name are both Feature_ABC. As underscores are ugly in topic names and features can be renamed, I would hope that I could rename the topic to be different than the filename.
The Help documentation suggests this is possible by editing the Topic Name Pattern in the Word Conversion Settings dialog of Project Settings. However, reagardless of the Pattern entered, every time I generate or update from the context menu of a linked Word document the topic name remains the same as the filename.
Because the topic name is shown in the Search panel and browser tabs, it will be a little ugly and may even be confusing. It is possible to edit the HTML directly, but then the HTML is overwritten each time the Word documents are update and the great advantage of using linked documents is lost.
Is there a way to solve this problem?
Thanks in advance for any help you might be able to provide.Thank you for your quick reply - just checked Multifox out.
It seems it still forces me to open a new window, while preventing the need for a new profile.
Why isn't it in the addons.mozilla.org ? Looks dangerous ... -
I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
Itunes shows library different than on Touch
What's showing as on my IPod Touch 5th gen. is different than what's actually on the device and available for me to play.
I know, you won't believe me, but ITunes shows a whole different list of songs than what I see when I browse the device. It's like 2290 items according to iTunes, (good!), compared with 127 songs I can see on the device (bad!). Coincidentally, those 100 or so are all ones I've purchased from Apple.
The truth is that I've had persistent, massive problems with this thing over its life, which I've occasionally railed about here. Long story.
Question is, how do I get these two in sync again? - with all the tracks I've put on it, painstakingly, over hours and days. I suppose this could easily be for the ITouch forum, but I'm arbitrarily posting here because it occurs after hooking the device up to iTunes.
Thanks for any info.In an ideal world all of your media content is on your system drive, listed in iTunes and organized in a portable layout. You then have a complete clone of the iTunes folder as a backup. If your system drive is too small to hold everything then putting the entire library on an external drive with a backup on a second drive also works. If you want access to some content on the laptop when travelling without having to take the external then it is possible to split the library up and store some content locally and not others, but that requires more effort to get right.
I'm still not clear what has gone wrong on your system, but some third party tools (e.g. Sony VIAO media manager and some antivirus packages) can interfere with the way the iTunes updates its database files leading to the concessional corruption. iTunes also expects all media content to stay in the same place so any manual manipulation of the media folders can lead to trouble.
tt2 -
Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than his? How can i troubleshoot?
Can provide more information if needed...Hello nmohamm,
To examine the conversion settings in Acrobat, do the following:
1. Select Edit > Preferences
2. In the preferences dialog, select the "Convert From PDF" category.
3. In the "Converting From PDF" list, select "Excel workbook".
4. Click the "Edit Settings" button to view your conversion settings.
Regards,
Charlene -
I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I adjust it to look normal?
Hi Paul ,
It could be a compatibility issue as well as Acrobat 8 is an older version.
Do you get any error message while registering for the product?
Try repairing it and once and also check for updates as well.
Is it happening with all the word files or any specific one'?
Regards
Sukrit Dhingra
Acrobat 8 and Windows 7 Don't Work -
Why are my album pics in iPhoto on my iPad different than the pics in the same album on my iMac?
Configuration.
Maybe you are looking for
-
Multiple installations of XI 3.0 on the same Windows server
Hi, is it possible to have multiple instances of XI 3.0 installed on the same Windows server? I know that I can create seperate database users for the repositories and that I can have different ports configured for CMS. I'm concerned about the regist
-
I am working on a book (theme: photo essay). I have a scanned image of an old photo which is fuzy. I try to use the sharpen tool. When I hold the track pad down to make an adjustment and then release the pad, the image is momentarily sharper then fad
-
Can I edit fonts in bookmarks - I would like to have BOLD names of folders or subfolders or some names in italic...? Mark
-
I have iPhone 4S and using chrome app. Google recently give me a lot of problem, it redirect to me to some website I never heard before such as http://corp.kaltura.com/. It was different website couple days ago. I tried on Safari, both app will have
-
Hi, i've making a web application and im using xml for some operations.... i have the following problem when try to validate a xml SAXParser parser = new SAXParser(); parser.setFeature("http://xml.org/sax/features/validation", true); parser.setFeatu