Grab is not working. It's taking pictures fine, but the pictures are colored lines.

I have used Grab in the past just fine. It takes nice, big pictures of anything on my screen. Yesterday, I used grab like I normally would, and it took a picture that was the same size as what I had selected, but the picture wasn't there. It was just a bunch of black and colored thin horizontal lines. It does this for all the features...capture, selection, window, timed screen, etc. They all are full of colored lines!!! How can I fix this? I use grab a lot, so I would like to fix it ASAP!
Thanks!

Grab (or something like it) can be a very useful utility, but I'd suggest downloading the free SnapnDrag http://www.yellowmug.com/snapndrag/, which is easier to use and has equal or better functionality. I haven't had experience with Grab - but SnapnDrag will solve your issue with a download. It's a solid application that's been around for years.

Similar Messages

I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear

I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear, they have a skipping sound to them. I have erased teh CD-RW and tried again and it was somewhat better but the last few songs did the same thing.

Jennann,
First of all, it is better to use CD-Rs than CD-RWs, as the latter often give problems when used for audio CDs.
The problem you describe -- bad audio on the later tracks of an audio CD -- can almost always be corrected by doing the burn at a much lower burn speed. Use 2x.
The burn speed is selected in the dialog box that comes up when you request the burn. It defaults to "Maximum Possible," but there is a dropdown to select a lower value.

My 3D is not working in Photoshop CS5. All of the options are greyed out

Hi,
I just installed the photoshop CS5 but find out my 3D is not working, all of the options are greyed out. I have checked on the openGL menu in preference but still not work. I have core i7 and intel HD graphics 3000 with up to 1760MB dynamic video memory. please help

Is the active document RGB?
Could you please post a screenshot with the pertinent Panels/Menus visible?

Ads keep appearing on screen whenever I use any browser, either Safari or Chrome. I used AdwareRemover and it did not work. What should I do? The ads are powered by "PSJ 4.2"

What should I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n -\tmod date: %s\n -\tchecksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\/|\.prefP/&&/\/(Lib|usr).+\/(.+\.lproj|Contents|Info\.plist|Resources)|\.framework$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/([A-Za-z_]+\.lproj|Contents|Resources|Versions)(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)|\.(action|bundle|framework|kext|pkg|prefPane|service|vst)$/d;p;' 's/Pr.+n //p' ' /.kext$/ { s=system("PlistBuddy -c Print\\ :OSBundleRequired "$0"/*/I*|grep -q Sa");if(s==0) $0=$0" S"; };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n -\t"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' /[my]: /H;/^ *Lo.+: /{ H;b0'$'\n'' };$b0'$'\n'' d;:0'$'\n'' x;/: [3IU]/!d;s/.+n: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 14 31;A4 39 57 70 0;B2 15;B6 14 15 4;C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

App store and Music app on IOS 6 is not working. Music has my music, but the title of the songs are grey and when I touch them, nothing happens! The app store. when im on search, it exits the app. WHAT SHOULD I DO?!

Okay. I am totally in a bad situtation. I have IOS 6 and 2 things have gone wrong. The Music app where you have your music, is bad. I have songs and stuff. And when i touch a song nothing happens. The letters are grey and nothing happens. The app store is also a problem. The appstore on IOS 6, when im on search and i search for and app, it exits the app store in like 5 seconds. And when i first updated the IOS 6, it was still like that HELP!

Did you do a restore from iTune or iCloud backup recently?

Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searc

Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
Robert

Huh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing.

I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others.

Back in Dec I updated Itunes, with the new version, my IPHONE now I can no longer sync to Itunes. I have an IPOD that works fine but the IPHONE does not. What can I do?

Back in Dec I updated to the new version of Itunes. Since then, I can no longer sync my IPHONE. I have an IPOD that works fine, but the phone is not found on Itunes. I am abled to download pictures to my computer, but I can not sync my music. What can I do?

Click here and install the software.
(71121)

I recently had to wipe my hard drive thanks to a download happy teen. In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said

In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said teen decided they were going to borrow my external hard drive without telling me and "made room" on it. Is there a way to recover my catalogs? Please tell me there is because I was in the middle of working on a session when I had to wipe my drive and I would REALLY like to not have to go back and reshoot it. Any help would be wonderful!

It depends on how you wiped your drive. Depending on how you did it, only the directory was erased and the data can be found with drive recovery software. Some are free, although there is a small charge for most of them (~$30). You can usually download a trial version that shows if it will work and you have to pay to be able to save the found files. Use Google to search for the software. Different programs work differently and can find different things.
Good luck.
John

I recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...

I'am trying to copy pictures from Print Shop to send as a e-mail, not an attachment but putting the picture in the actual e-mail. The lettering from the Print Shop document will copy and paste but the picture will not. How do I get it in the email?

I create a document in Print Shop Delux download pictures from that program to make a flyer. I'am trying to send the flyer to someone and they do not want it as an attachment so I'd like to send it in the body of the e-mail. They lettering on the flyer copy and paste but the picture will not copy and paste. How do I get the picture to copy and paste in the body of the e-mail. I can't copy and paste the whole document because in did a insert text box for the picture.

Click the image , hold your mouse button, drag it and bring it to Firefox window from task bar below and release it into the body of your e-mail.Works on Gmail, Yahoomail , Hotmail....May not work on other e-mail service providers.

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
Can anyone help me?

Hi there Cinthia88,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage

When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

Grab is not working. It's taking pictures fine, but the pictures are colored lines.

Similar Messages

Maybe you are looking for