Grab my cell phone no wifi signal
grab my cell phone no wifi signal, and does not give the option to connect wifi settlement or died will definitely wifi from my iphone??
Hi Nach71,
Thanks for using Apple Support Communities.
The following Wi-Fi base station settings are recommended to ensure maximum performance, security, and reliability when using Wi-Fi.
For more information on this, take a look at this article:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Best of luck,
Mario
Similar Messages
-
Problems to connect my cell phone via wifi
Hello, I have a new cell phone, Nokia 311 and I m trying to connect to Internet via wifi. Well, the phone detect the network but when I put connect it says "fail connexion". I have an airport extreme, and with my other devices I don't have this problem.
Thanks,
PD: I'm from Argentina. I speak SpanishHi Nach71,
Thanks for using Apple Support Communities.
The following Wi-Fi base station settings are recommended to ensure maximum performance, security, and reliability when using Wi-Fi.
For more information on this, take a look at this article:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Best of luck,
Mario -
I cant conect my phone to my new wifi modem. it is finding the network but says wrong password when i am entering the correct one off of the modem
It is possible that your phone is trying to connect to HT40. I've had the incident a couple of times with laptops where the wireless card refused to connect to HT40. I'm not sure whether or not the Comcast modem has control of the HT versions
-
I have just downloaded ios7 and have lost all use of my iMessage I have reset all my settings but still nothing. I have entered my apple ID as requested but keep getting a message saying cannot sign in network connection error try again later even though I have full phone and wifi signals. Please help
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Boost Mobile Example
Greetings Earthlings and Android Fans....
Just posted this to my blog and wanted to share a text version here. Check it out if you're looking to tether your tablet to your cell phone. I tethered my Thrive to my Boost Mobile LG Marquee.
From: Kaio's Klassroom: WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Infrastruct...
Want to tether your tablet to your cell phone, but Ad-Hoc got you down? How about trying this nifty little tweak that got me up in running in a jiffy!!
I recently got a new LG Marquee Prepaid Phone with Boost Mobile @Amazon and I really love it. Only problem is, I was spoiled with my last phone because it was rooted to support Infrastructure tethering and I had no idea how difficult and unusual that was. I've since done some research with my new Boost Mobile LG Marquee, and after a little trial and error (and some lucky Google searches) I have successfully tethered my LG Marquee to my Toshiba Thrive tablet!!!
Here's what I did:
Mandatory Disclaimer - The following information is for informational purposes only. Proceed at your own risk!!! Rooting will void your warranty and could "brick" your phone if you do something wrong!! So if you damage your phone, or any of your tech, that's on you.
NOTE: If you don't have an LG Marquee, just search "your phone model" + "root" and you should find plenty of information specific to your phone. There's always people wanting to do the same thing you are, so it's just a matter of finding the information that's already out there. Once your phone is rooted, come back here and start on Step 2.
Step 1 -- Root your LG Marquee (You do NOT need to root your Tablet)
The following information was taken from LG Cell Phones Blog and are for the LG Esteem, which is a generic root mod.
> Enable USB Debugging on your LG Marquee: Go to Settings > Applications > Development > Enable Debugging and check the box.
> Download and install the LG USB drivers at: LG Cell Phones Blog You want the file "LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3. 2.1_2.exe"
> After installing the USB drivers connect your phone to a PC. On the phone, pull down the notification bar at the top of the phone's screen and click on USB Connected. Set the phone to Internet Connection mode (CHARGE ONLY not Mass Storage).
> Download "LG_Esteem_Root.zip" at: LG Cell Phones Blog. Unzip the file and double-click on the run.bat file.
Note: Kaspersky Internet Security will flag this file as a Trojan: "Exploit.Linux.Lotoor.ag" I don't believe this file is a Trojan, per se. I believe it's required during the root process. When I let Kaspersky eliminate the file, my phone wouldn't root. So I decided to run the root program on a secondary computer, just in case. I disabled Kaspersky temporarily on that computer, and ran the root zip and my phone rooted without a hitch. I later scanned my phone with Webroot Security and AVG, and neither found any viruses on my phone, so I believe the process is safe. Technically, rooting your phone probably does involve a Trojan hack, hence why Kaspersky flags that file. However, I must reiterate to proceed at your own risk.
Just in Case -- How to Unroot Sprint LG Marquee:
Use root explorer and delete superuser.apk from the /system/app folder. Go to the Android market and download and install super user. Use root explorer again and delete su from /system/bin. Go to the market and uninstall super user. Do a factory reset & you will be back to square one.
Step 2 -- Verify that you have properly rooted your phone with this nifty free app: Root Checker Basic
If you did everything right, you should get a message that says "Congratulations, this device has root access." If you fail to get that message, go back to Step 1.
Step 3 -- Download the Android WiFi Tether for root users app
Currently, the only version of Android WiFi Tether that worked for me was 3.1-beta7. The newest version doesn't work properly with tablets, so be sure to get 3.1-beta7. Here's a link and QR code for easy access: WiFi Tether 3.1-beta7 apk
Step 4 -- Configure WiFi Tether app:
I've tried many settings, but these are the only ones that have worked. Start the app and grant Super User Permissions. Then Click Menu to get into the app's setting. Inside the Settings, do the following:
> Change Device Profile to: Samsung Galaxy S
> Change Setup Method to: Netd (Master)
> Enable WiFi Encryption: Check box to Enable
> Change Pass Phrase to: any 13 digit password of your choice.
> Change SSID to: any name of your choice.
> Change Channel to: 4 (2427mhz)
> Disable Update Check: Check box to Disable.
> Click your phone's Back Arrow to Exit back to the app's Main Screen
> Touch the WiFi button onscreen to start tethering.
> Grant Super User Permissions
Note: If you get Error Code 67, Click Dismiss. If you update, I don't know what will happen; my guess is it will disable the ability to tether. But if I click Dismiss, my tethering is Enabled, and works perfectly.
Step 5 -- Grab Your Tablet & Start Tethering
> Go to Settings > Wireless & Networks > Check the box to Enable WiFi > Click WiFi Settings > Under WiFi Networks, find the SSID for your tethering app that you entered in Step 4 above. > Click on the SSID of your tethering app > Enter the 13 digit Pass Phrase you created in Step 4 above and Click Connect.
That's it! Congratulations -- your tablet should now be tethered to your cell phone!
Now that you're tethered to your cell phone, be smart, and DON'T download a ton of gigabytes. Just be smart about it, and you should be fine. Remember, tethering to your cell phone probably goes against the terms of service with your cell phone carrier, so DON'T abuse the privilege.
Now that you're the envy of all your friends, why not test your data speeds: SpeedTest App - FreeMy data speed test results with my Toshiba Thrive tablet tethered to my LG Marquee:
Download: 855kbps Upload: 302kbps
That's pretty great for a 3g no-contract cell phone with unlimited data.
Happy tethering everyone!
Go forth and Androidify!
Hugs, Kaio
;oD
From: Kaio's Klassroom: WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Infrastruct...If you have a compatible device without Android Market access, you can download Firefox directly from our FTP server. See the instructions here for details: https://wiki.mozilla.org/Mobile/Platforms/Android
-
Airport Express & Wireless WIFI device from cell phone carrier
I am trying to understand the functions and purpose of this airport things!
Can airport express be used with my wifi mobile broadband device from local cell phone carrier?
The main reason I am thinking about this purchase is to add 2 printers to be able to print to from my MACBOOK.
I am also looking to expand anything else I can with this airport thing?
Forgive the lack of understanding and thank you in advance !Welcome to the discussions!
+Can airport express be used with my wifi mobile broadband device from local cell phone carrier?+
The AirPort Express can "join" a wireless network as a client and providing that your printers are compatible, you should be able to print to them. Not all printers are compatible and if you have an all-in-one device, only the print function will work. Fax, scan, copy, maintenance, etc will not work when the device is attached to the AirPort Express USB port.
If you want to connect more than one printer to the AirPort Express, you will need a powered USB hub.
The AirPort Express will not be able to "extend" your wireless network. In other words, it will not do anything to boost your wireless signal.
I would advise you to make sure that you understand the store's return policy in case things do not work out as you hope. -
Help with issues with cell phone when on Wifi in iOS7
Since I updated to iOS7 on my iPhone 5 (bought in Jan 2013), I'm frequently experiencing dropped calls. I have great wifi signal stregth and this is happening in multiple wifi networks so it's not the network itself. Also, those on the other end complain that my voice breaks up and they can't hear all that I'm saying.
If I switch over to the cellular network, I get much better quality, even if there are few 'bars/dots' of signal strenght in 3G. When I used the same phone on iOS6 on many of the same wifi networks, I didn't encounter these issues.
Has anyone else experienced similar performance issues? Anyone have any suggestions/ideas on how to troubleshoot and/or resolve?
TIAThanks. I learned something new. I didn't realize the cell calls weren't able to use Wifi unless through an app (e.g. Skype, etc.). So, I guess what's happening is that if I have Wifi enabled and make a cell call, it (somehow) affects the call quality. I can be in the same position in the house/building and my audio will break up for the folks on the other end of the call. If I turn Wifi off, it improves immediately and the problem goes away.
So maybe there's something up with both of thos things going at the same time. Now that I know, I can likely work around the problem. Thank you for educating me.
Cheers. -
I recently purchased an i pad and have the internet at home, I am also a truck driver and once i leave home, I won't have the internet unless I stop close to where there is wifi, is there anything out there that I can purchase so I will have the internet at all times
I purchased a Verizon MIFI 2200 mobile hotspot with my forst generation iPad almost tow years ago so that I could have internet access with my WiFi only iPad and my iPod Touch. All in all it is pretty reliable but as varjak paw stated above...
"Either of course will be dependening on your being in a location where the carrier provides cell coverage".
Like my cell phone - there are locations where the MIFI doesn't play nice with the cellular networks and it may struggle to find a good signal. On the other hand, sometimes my connection zips along quite nicely. Just keep that in mind - if and when you decide to purchase a mobile hotspot. -
Does the new ipad 4g gps works without cell phone signal
does the new ipad 4g gps works without cell phone signal?
GPS has no need of a cell phone signal or wifi. The only reason you would need a data signal is to download maps to enable the GPS to show you where you are. If you installed an app which includes the mapping, for instance TomTom, you have no need for data reception.
-
Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information. -
Can't connect Samsung WIFI cell phone to Tmobile using Airport time capsule
I am using Tmobile for cell phone service and Comcast for high speed internet. I am unable to mske a WIFI cell phone connection. I get Tmobile ISP errors. Talked with Tech support from Apple, Tmobile and Comcast.
Took the phone and the time capsule to the local Bridgeport apple store. They managed to get the connection up and running with my router. My phone also worked with their store network. We had to open UDP ports 500 and 4500 both ways and also IP protocols 50 and 51 both ways on the time capsule to make it work.
With the same settings, it does not work at home using Comcast.
Help is appreciated.I still can't use it the way I was hoping because it then becomes a T/M back-up disk and not a normal usb/firewire disc.
You are first mounting the drive on the desktop, correct?
Not sure what you mean here.
You can drag/drop files normally or copy/paste files to the drive icon on the desktop, just as you would a normal drive that is displayed on the desktop.
Or, double click the drive icon on the desktop and drag/drop files into the open window there.
Tell us the steps that you are using to mount the drive on the desktop. What happens after each step? -
I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
How do I rectify
Paulyou can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
But, I haven't tested this with a BT product...and I suppose anything is possible.
Still, I would be extremely surprised if this worked.
The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port. -
I recently downloaded ios7.1 to my ipad and my wife's cell phone # appeared on my ipad. It would not let us change it. Now I am getting her text messages and she is getting the apps I load on her iphone4S. We both have iphone 4S, but she has version 7.1 and I still have 6.0 because I didn't like the changes in v.7.0. We share an Apple ID and password which was not a problem before. My daughter says this is our problem, as she had her husband had this issue. She doesn't know how he fixed it. Has anyone else had this issue and can you tell us how to separate our Apple ID/passwords if this is, indeed, the problem?
If you share an Apple ID, both of your phone numbers should be linked to that ID. You should be able to use your phone number as well. My wife, my daughter and I all share an Apple ID for purchases, and we each text from our iOS devices using our own iPhone numbers.
When iOS 6 came out, you were able to link the phone number with your Apple ID to use for Messages and FaceTime. You will need to sign out of messages on all devices and then start the process all over again.
Take a look at this.
iOS and OS X: Link your phone number and Apple ID for use - Support -
used to be able to surf the web using 3G and be on a cell phone call. Now it only works when i connect to wifi...WHY WHY WY
Verizon is not a GSM carrier. Verizon and Sprint are CDMA carriers that have also recently adding an LTE (4G) network. The iPhone 5 is a combination LTE/GSM/CDMA network compatible phone.
ATT and T-Mobile are GSM carriers. ATT has also recently added an LTE network.
If you were able to talk and surf the web on Verizon's CDMA network with your iPhone previously, that was some trick which is not supported with a CDMA network as is supported with GSM 3G networks. -
Cell phone signal looking icon in Safari?
When Safari loads a new page, I see an icon in the upper left of the page briefly that looks like a cell phone signal meter. What is this? I'm using Safari on a self built Windows 7 machine and was wondering if I had some sort of malware or adware. I do not get this icon using Safari on my MAC.
Are you aware that Apple is dropping support for Safari for Windows > Apple apparently kills Windows PC support in Safari 6.0
Better off using IE or Chrome.
Maybe you are looking for
-
Pur requisition manually or through MRP
Dear Friends Please sapre some time for my querries 1 How do I know that a particular Pur requisition was made manually or through MRP? 2 How to insert company logo in Printout of Purchase order? 3 How we can check that what are the documents
-
I ran a scan on my computer and it found 1,288 errors how can I get rid of them?
I did a scan test on my desktop and found that I have run sections(10 errors), user software settings(195 errors), system software settings(867 errors), ActiveX and com sections(78 errors), file associations(92 errors), uninstall sections(known as ad
-
Upgrade translation hub for 9.0.4 to 10.1.2 and keep forms translations
We are upgrading a forms application (Developer suite and application server) from 9.0.4 to 10.1.2. The problem is I can not seem to get translation hub to upgrade and keep our forms module translations. Translation hub needs to upgrade to version 38
-
How to set up an iPad to print?
How to set up an iPad to print?
-
I have forgotten my passcode, what do I do?
I forgot my passcode for my ipod touch 4th gen, the other day and I don't know what to do... can anyone help, please help! Thanks.