Grabing images from & Apply OCR To that image

Hi,
I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
I m modified some Sample NI VI's for capturing the images & for OCR.
I m new for labview. I cant understand where is the problem in the VI.
i also create a character set file for reading the characters using OCR Training.
so please help me to find the solution.
Attachments:
Character reading.vi ‏91 KB

HI.
Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
Regards.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S
Attachments:
Camara OCR.vi ‏42 KB
11.JPG ‏77 KB
22.JPG ‏17 KB

Similar Messages

Grabing images from camera & Apply OCR To that image

Hi,
I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
I m modified some Sample NI VI's for capturing the images & for OCR.
I m new for labview. I cant understand where is the problem in the VI.
i also create a character set file for reading the characters using OCR Train
so please help me to find the solution.
Attachments:
Character reading.vi ‏91 KB

HI.
Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
Regards.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S
Attachments:
Camara OCR.vi ‏42 KB
11.JPG ‏77 KB
22.JPG ‏17 KB

How do I remove "read-only" from images transferred from a PC so that I can add keywords?

I switched to a Mac from a PC a year ago and have been using PSE 9 + Organizer with no problems. I transferred all my images from the PC at that time. Now, I want to transition to using Bridge and have been assigning keywords to the newer photos added after I started using the Mac. I am unable to assign keywords to the earlier photos because Bridge says they are read-only. I checked the Apple Get Info on the folders and they are read and write. Any ideas?

the Sharing and Permissions box on the bottom shows I have "custom" and "read & write" access for both pre- and post 9/2010 folders. All others (nobody, staff, everyone) have read only. Of course there is actually only me.
Anne,
It seems related to your OSX. I think you have created a new user account without adding a name (hence Nobody) but I'm a bit guessing in this department.
The default user account folders like pictures and movies have the ability to set to 'custom'. With you as only user and administrator there should preferably only be one user account visible. By default a newly created folder should show 3 options for sharing and permission. User (your name of the user account) Read and Write
Staff: read only
Everyone: Read only.
I have tried deleting "nobody" and "staff" and changing Annie to read and write - all kinds of combinations.
You can only edit users accounts in the system preferences / Accounts. In here is the option for you as administrator to delete and create users accounts. Here is where it is getting a bit difficult because we can't see your set up for the OSX. But if you have to change 'Annie' to read and write and assuming your user account name is Annie it should already have been on read and write. If you are logged in as 'nobody' this should have shown read and write to have access to change metadata.
So you first have to study a bit about user accounts on a Mac and see if you have a correct install. It is not very difficult and you will gain profit from this knowledge.
try the Apple.com support site, for a start here is a link to an article from the Apple Knowledge Base (kb) article about user accounts:
http://support.apple.com/kb/HT3309
Some images have been moved from the original folders so that could be a problem.
Basically you should not have any problem with moving files to whatever folder you want or create on your user account (or to external Disk etc.)
For a start you could create a new main folder in your user account Home folder and call this test or whatever you like except an already existing name. Of course also check if you have read and write permissions for it...
Open Bridge, use the folder panel to select a folder with the problem files. Now scroll through the folder panel and click on the triangle in front of your home folder. This will open the list with nested folders while Bridge content window still keeps its focus on the problem files you first selected. Select a bunch of the problem files from the content panel and use drag and drop to move the files to the newly created folder. Just move the mouse on the folder name and release the files.
If you hold the option (alt) key while dragging there will appear a + - sign and the files are copied to their new location, just use what you think is best for you.
After this action has finished click with your mouse on the newly created folder name in the folder panel and now the files should show in the content panel (if correct also already cached). Check if you are able to change the metadata now.
Most have tags from current and previous Photoshop Elements versions.
That should not be a problem, some info will be readable by Bridge, others not. Some Bridge version even had their own Bridge versions.

How do I recover a file of images I removed from LR 4.3 that is not found in my desktop recycle bin?

How do I recover a file of images I removed from LR 4.3 that is not found in my desktop recycle bin?

I would try the following, in order
Have your operating system search your entire hard disk(s)
If that doesn't find the files, restore from backup
If you don't have backups then perhaps you should consider making backups of both your catalog file and your photos from now on
Locate, download and install and run an "undelete utility" (freeware versions are available) -- if you are going to do this, do it immediately, do not perform other tasks on your comptuer

How do you remove items from the assets panel that are duplicated?

How do you remove items from the assets panel that are duplicated?

If you add an item to a slideshow, you'll usually see 2 entries for that image in the assets panel - one represents the thumbnail, and the other represents the larger 'hero' image.
It sounds like you may have added the same image to your slideshow twice. You can select one of the hero images or thumbnail images in your slideshow and use the delete key to remove it. Then the extra 2 entries in the assets panel should disappear.

Can I find photos from an entire event that were just loaded but seem to have disappeared?

Can I find photos from an entire event that seem to have disappeared?

Larry,
I have a Mac Book Pro 2.53 GHz Mid 2009
Using OS X lion 10.75
I don't know what version of iphoto....just what was originally installed but I use an external storage drive for my photos and use time machine for back up.
I loaded the photos Friday night- thought they went into an event, deleted photos from my camera (dumb, I know) then in the morning a grey box with event date shows palm tree and sunset image but no photos.

How can i set the "Keep the following number of major versions" to a limit suppose 20 and then disable it from the users so that they cannot change the value?

I want to set the value of "Keep the following number of major versions" in the versiong settings of a documnet library to a limit say 20 and then disable the option from the users so that they cannot them. Is it possible thorugh some custom coding?

Hi Moumita10,
Just curious about that how the custom CSS code works in your environment if put it in the “LstSetng.aspx” page.
In my environment, it hides the "Keep the following number of major versions" setting in the “LstSetng.aspx”
page after applying the custom CSS style there.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to create a WMI filter in order to apply to machines that have Skype already installed with deploying a newer version of Skype

Hi there,
I was wondering whether anybody could tell me how to create a WMI filter in order to apply to machines that have Skype already installed with deploying a newer version of Skype.
Your help would be much appreciated.
Many thanks,
Timbuctoo

Hi,
To create a WMI filter
1.In the Group Policy Management Console (GPMC) console tree, right-click
WMI Filters in the forest and domain in which you want to create a WMI filter.
2.Click
New .
3.In the
New WMI Filter dialog box, type a name for the new WMI Filter in the
Name box, and type a description of the filter in the Description box.
4.Click
Add .
5.In the
WMI Query dialog box, either leave the default namespace (root\CIMv2) or enter another namespace by doing one of the following:
◦ In the
Namespace box, type the name of the namespace that you want to use for the WMI query.
◦ Click
Browse , select a namespace from the list, and then click
OK .
6.Type a WMI query in the
Query box, and then click OK .
7.To add more queries, repeat Steps 4 through 6 to add each query.
8.After adding all queries, click
Save .
In the Query box, type the following WMI query:
Select * from Win32_Product where Name LIKE “%Skype%”
Best Regards,
Erin

I'm using iphone 4S, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. can someone help.

I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
Thanks in advance

Hi Eidda,
This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
Mac OS X Mail: What is a winmail.dat attachment?
http://support.apple.com/kb/HT2614
-Griff W.

[svn:osmf:] 14871: Fixing anchoring 'right' and 'bottom' properties not being applied on items that don't have a width/ height and position set.

Revision: 14871
Revision: 14871
Author:   [email protected]
Date:     2010-03-19 01:05:54 -0700 (Fri, 19 Mar 2010)
Log Message:
Fixing anchoring 'right' and 'bottom' properties not being applied on items that don't have a width/height and position set.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRenderer.as

If you're just doing it in a back and forth or spiral fashion, you don't need to check whether a square's been filled in. You just go from a start point to an end point. Those points and the squares in between are determined by simple arithmetic.
If you're doing it randomly, I wouldn't use the GUI elements themselves. I'd have, for example, and array of booleans that tells whether each square has been filled in.

I deleted the photos from my iPhone 6 that were synced from my computer automatically but it is still using my storage. How do i fix that? I have tried all of the steps listed in the community.i have the new iTunes 10.

I deleted the photos from my iPhone 6 that were synced from my computer automatically but it is still using my storage. How do i fix that? I have tried all of the steps listed in the community.i have the new iTunes 10.

Hi QuisB123,
If you are having an issue with reclaiming free space after deleting photos from your iPhone, use the steps in this article to assist -
If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
Specifically -
Orphaned files might remain on your iOS device if it's physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, you might see a large amount of "Other" disk usage for the iOS device in the Capacity indicator in iTunes. Try these steps:
Turn off the music or photo sync option in iTunes for the device.
Click Apply to sync the changes to the device.
Turn the music and photo sync options for the device on again.
Click Apply again to try to sync the device to iTunes. If you see the "Not enough free space" alert, continue to step 5.
Turn off the automatic syncing functions for the iOS device:
Select the iOS device from the iTunes window and click the Summary tab.
Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
Click Apply to sync the changes to the device.
Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes. If you see the "Not enough free space" alert, continue to step 6.
Restore using iTunes.
Thanks for using Apple Support Communities.
Best,
Brett L

TS4006 I lost my iPad. I located it using the Find My iPad feature. I got an e-mail from Apply stating it had been found. What does this mean? Does this mean someone used it, tried to use it or what?

I lost my iPad. I located it using the Find My iPad feature. I got an e-mail from Apply stating it had been found. What does this mean? Does this mean someone used it, tried to use it or what?

When you say an email from Apply, do you mean that the sender is named "Apply"? If so, what is their full email address (e.g. [email protected])?

Loopback GPO on Replace prevents other user GPOs from applying

I had the need to create a GPO and use a loopback. Simple little GPO, just to add some stuff to trusted sites on a specific Citrix server. I created it as a user GPO then did a loopback so I could apply it to only the application hosting XenApp
server I wanted.
I set the loopback to replace, just because it was default and the trusted site settings were not applied anywhere else; I didn't really care.
Long story short, when I linked that GPO, it, for some reason, prevented all other user GPOs from applying. Not denied, they just didn't even show up.
I figured it out shortly after, and when I changed it to merge, the other user GPOs applied again. This is not the way I believe Loopback is supposed to work, in either replace or merge.
Any insight on why that might have happened?

> Long story short, when I linked that GPO, it, for some reason, prevented
> all other user GPOs from applying. Not denied, they just didn't even
> show up.
> I figured it out shortly after, and when I changed it to merge, the
> other user GPOs applied again. This is not the way I believe Loopback
> is supposed to work, in either replace or merge.
This actually IS the way it is supposed to work:
http://evilgpo.blogspot.com/2012/02/loopback-demystified.html
http://blogs.technet.com/b/askds/archive/2013/02/08/circle-back-to-loopback.aspx
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))
That makes a lot more sense.
What it says on the GPO itself is:
"Replace" indicates that the user settings defined in the computer's Group Policy objects replace the user settings normally applied to the user.
I was interpreting that as GPOs it would replace were only the settings in the loopback.

Reading & Writing from/to OCR

Hi,
Is there a way to read and write the Oracle Cluster Registry.
Are there any API's available for the same.
Thanks

whatis wrote:
I have a SW application running on all nodes in the RAC Cluster.
The SW needs to write data to a place which is visible to all and can be read by all the other nodes. Also it should be able to gather information (especially about failover), so should be able to read from it.The OCR is not used to as a common data store for CRS applications - that is typically what a cluster file system is used for. This allows the same set of directories and files to be visible to applications on each and every cluster node.
The OCR is specific to CRS and should only be used by CRS software.
I found this link on the internet 'C Application Programming Interface to Oracle Clusterware'
http://download.oracle.com/docs/cd/B28359_01/rac.111/b28255/crsref.htm#CHECGHGI
Yes, if you want to create a cluster application that you want to be managed via CRS. But this requires more thought than simply slapping a few calls together in an application to make it cluster enabled.
Is this the correct way to do it? Can reading/writing from/to OCR lead to fatal errors?Unsure whether it is the correct way for the problem you're trying to solve as that problem is pretty still much unknown to us as you have not described it.
Can one corrupt the OCR? Not if the API calls are used and used correctly.
It is a bit strange to see a posting about using the CRS API itself - usually we write our software in the RAC layer (as PL/SQL and Java stored procedures, using the cluster features of the database instances).
Do you intend to only use CRS? Or CRS with ASM and RAC? And why do you want external C application code to make use of cluster services?

How do i enable Redaction and apply it so that when I save it NO ONE can undo it

How do i enable Redaction and apply it so that when I save it NO ONE can undo it

In Acrobat Reduction is a two-step process.
1. Tools->Protection->Mark for Reduction. In this step you mark all content that you want to reduct out.
2. Tools->Protection->Apply Reduction. Then save the reducted PDF (with a different name/location if you want to have the original available).
The Reduction tool in Acrobat permanently removes the reducted content from the saved PDF, so that it is not there. Because of that anyone who opens saved reducted PDF cannot undo reduction because the reducted content is not even in the file.
Make sure that you performed step 2. If you just performed step1 and saved the file, the to be reducted content is still there. This is useful wgen several people reduct the same PDF and want to see what has been already reducted.

Grabing images from & Apply OCR To that image

Similar Messages

Maybe you are looking for